HomeMy WebLinkAbout234.30Stormwater
Pond
This pond is in our care.
Runoff is held here after storms. It is released
slowly or stored until the next storm when it is
replaced by incoming flows. This helps prevent
downstream flooding and erosion and helps
clean the water. For more information or to report
littering, vandalism or other problems,
call the City of Renton, Public Works Department,
Maintenance Division at (425) 430-7400.
Pond Name and GIS Facility ID Number
SPECIFICATIONS:
SIZE:48 INCHES BY 24 INCHES
MATERIAL:0.125-GAUGE ALUMINUM
FACE:HP-700-O PERM KR M ITEM #62200M - BEIGE VINYL OR APPROVED EQUAL; DOL 6060 - UV/ANTI-GRAFFITI CLEAR OVERLAY FILM.
LETTERING:SILK SCREEN ENAMEL WHERE POSSIBLE, OR VINYL LETTERS.
COLORS:BEIGE BACKGROUND, TEAL LETTERS.
TYPE FACE:HELVETICA CONDENSED. TITLE: 3 INCH; SUB-TITLE: 1 1
2 - INCH; TEXT: 1 INCH; OUTER BORDER:
1
8 INCH BORDER DISTANCE FROM EDGE: 1
4 - INCH; ALL TEXT 1 3
4 - INCH FROM BORDER.
POSTS:PRESSURE TREATED, BEVELED TOPS, 1
2 - INCH HIGHER THAN SIGN
INSTALLATION:SECURE TO CHAIN LINK FENCE IF AVAILABLE. OTHERWISE INSTALL TWO 4"X4" POSTS, PRESSURE
TREATED, MOUNTED ATOP A GRAVEL BED, INSTALLED IN 30-INCH CONCRETE FILLED POST HOLES (8-INCH
MINIMUM DIAMETER), WITH THE TOP SIGN NO HIGHER THAN 42 INCHES FROM GROUND SURFACE.
PLACEMENT:FACE SIGN IN DIRECTION OF PRIMARY VISUAL OR PHYSICAL ACCESS. DO NOT BLOCK ANY ACCESS ROAD.
DO NOT PLACE WITHIN 6 FEET OF STRUCTURAL FACILITIES (E.G. MANHOLES, SPILLWAYS, PIPE INLETS).
POND NAME AND
GIS FACILITY ID
NUMBER: TO BE PROVIDED BY THE CITY DURING THE CONSTRUCTION PLAN APPROVAL. POND NAME IS THE NAME OF THE PROJECT
ON THE APPROVED CIVIL CONSTRUCTION PLANS.
NOTE: IF THE FACILITY HAS A LINER TO RESTRICT INFILTRATION OF STORMWATER, THE FOLLOWING NOTE MUST BE ADDED TO
THE FACE OF THE SIGN: "THIS FACILITY IS LINED TO PROTECT GROUNDWATER QUALITY." IN ADDITION, THE BACK OF THE SIGN SHALL
INCLUDE INFORMATION INDICATING WHICH FACILITIES ARE LINED, THE EXTENT OF THE LINING, THE LINER MATERIAL USED, THE LINER
THICKNESS (IF CLAY OR TILL), AND THE TYPE AND DISTANCE OF THE MARKER ABOVE THE LINER (IF A GEOMEMBRANE).
Public Works Department
Surface Water Utility
PUGET SOUND STARTS HERE LOGO SPECIFICATIONS:
COLORS:ORANGE (R223, G96, B32); TEAL (R0, G142, B179)
SPACING:KEEP ALL OTHER LOGOS, GRAPHICS, AND TYPE AT LEAST 1 UNIT AWAY FROM THE LOGO ON ALL SIDES. 1 UNIT IS THE
HEIGHT OF THE SMALL CAP "A" IN THE LOGO AT ANY GIVEN SIZE.
PERMANENT PUBLIC STORMWATER
POND SIGN
STD. PLAN - 234.30
PUBLIC WORKS
DEPARTMENT
APPROVED:
DATEMartin Pastucha
Public Works Administrator
UNLESS OTHERWISE NOTED, DRAWING IS NOT TO SCALE (NTS)
DocuSign Envelope ID: 3B1B34D3-7E0A-476C-ADB3-4329FFE0C108
8/13/2020 | 8:48 AM PDT