The URL can be used to link to this page

Home My WebLink AboutSC21000973.pdfDEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT : SC21000973 IVR Number: 21000973 Permit Information Permit Name: ExteNet Systems - Small Cell Node 00300 Address/Location:03/05/2021Application Date:0823059165Parcel Number: 815 HOUSER WAY N Permit Type:11/10/2021Issue Date:SC - Small Cell Permit Work Class:12/16/2030Expiration Date:Construction Description: ExteNet Systems Master Franchise Agreement small cell, Ord. 5978 REVISION: EXTENET TO INSTALL NEW SCHEDULE 80 CONDUIT FROM EXISTING CITY OF RENTON POWER SERVICE CABINET TO EXISTING POWER VAULT. SEE ATTACHED PLANS FOR DETAILS. Node 00300: ExteNet Systems proposes to install a small cell facility on City of Renton light pole (1052D). Contacts Name Address PhoneTypeBilling Accounts Payable attn. Joe Milone Extenet Systems LLC - specialized 3030 Warrenville Rd Lisle, IL 60532 B: (425) 326-6050Contact Leslie Bradley Morrison Hershfield 600 Stewart Street, Suite 200 Seattle, WA 98101 C: (206) 992-1684Contact Raeann Anderson Extenet System 5844 John Hickman Pkwy Frisco, TX 75034 Contact PARK DRIVE I LLC 9125 10TH AVE S SEATTLE , WA 98108 Owner Accounts Payable attn. Joe Milone Extenet Systems LLC - specialized 3030 Warrenville Rd Lisle, IL 60532 B: (425) 326-6050Specialized Billing General Conditions & Signature Permission is hereby given for the work described on this permit according to the conditions hereon and according to the approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton. Ÿ This permit and plans must be posted at the job site at all times.Ÿ I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to Renton codes and ordinances. Ÿ (Date)(Signature) Page 1 of 2THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES DEPARTMENT OF PUBLIC WORKS Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 1 of 2 | Published: 11/25/2019 Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380 Website: rentonwa.gov TRAFFIC CONTROL PLAN (TCP) APPLICATION Published: 11/25/2019 TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION FOR REVIEW/APPROVAL NO LATER THAN FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK. The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a TCP and obtain City of Renton's approval of that plan when construction, repair, or maintenance work is to be conducted within the city's right-of-way. TO THE APPLICANT: Submit the TCP application form and required submittal documents to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name]” or the above address. The following items, electronic copies preferred, are all required for submittal of the TCP Application: 1.☐ A copy of the Traffic Control Plan (TCP) Application form. 2.☐ A copy of the required TCP layout, preferred 11” X 17” paper size format, which shall: ☐Include map(s) showing the location of the project and work area. ☐Be legible lettering and clear, contrasting, symbols of viewing or printing. ☐Must indicate street names, and north arrow and scale. ☐All signs and detour routes shall conform to the MUTCD, WSDOT TCPs, and the Washington State Traffic Control Flagger Certification handbook, by the Evergreen Safety Council. ☐Types of plans required: ☐Work hour plan – show all mobility impacts during construction hours. ☐Non-work plan - show all mobility impacts after work hours when limited or no work is happening in the right-of-way (ROW), if applicable. ☐Changing construction phases – show construction sequence and each construction phase change even if the traffic control is not modified, if applicable. ☐Pedestrian access/detour plan, if applicable. Project Name: ______________________________________________ Permit #: _____________________ Project Address: ____________________________________________________________________________ Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________ Description of Work, Work Schedule, Equipment Used: _____________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ Construction Company: ________________________________________ Phone/Cell: (_____) _____-________ Applicant Name: _________________________________ Email: ______________________________________ Business Address: _________________________________ City/State: __________________ Zip: __________ Approved By: _______________________________________________ Date: ________________________ Transportation Operations Engineering ExteNet Renton Small Cell Node 00300 Renton Light Pole 1052D - adjacent to 801 Houser Way N (47.497557°, -122.195629°) Monday Friday 8:00am 3:00pm ExteNet Systems proposes to construct a small cell facility by installing a City of Renton steel light pole with antennas and equipment. ExteNet Systems, Inc 425 326 6050 Carly Nations (Glotel, Inc for ExteNet)cnations@glotel.com 13542 Wallingford Ave N Seattle, WA 98133 SC21000973 Scott Warlick CED 11/10/2021 Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 2 of 2 | Published: 11/25/2019 APPLICANT AGREES TO ALL THE FOLLOWING: •TCP must be approved prior to commencing the work, and all permit conditions shall be met. •Existing pedestrian access shall be maintained. The work on pedestrian facilities shall be limited to one corner at a time, with the least possible inconvenience or delay to pedestrians. •Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery road conditions during work and non-work hours. •The start of Work Time begins when any street or travel lane is fully/partially closed or impacts the follow of traffic. This includes set up within the traveled way or immediately adjacent to the roadway. •Emergency services (253-852-2121) shall be notified twenty-four (24) hours before any street or lane closures. •Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public transit, to be affected by a temporary lane or road closure. •TCP for all street and/or lane closures shall be implemented and performed in compliance with the Manual on Uniform Traffic Control Devices (MUTCD) and/or State of Washington Department of Transportation (WSDOT) and all traffic regulations of the City of Renton and Revised Code of Washington (RCW). •Any lane or street closures not in conformance with the approved traffic control plan and/or without notification of emergency services may result in receiving a citation for violation of RCW 47.36.200 Signs or Flaggers at thoroughfare work sites and RCW 9A.36.050 Reckless Endangerment, and other applicable State and City codes. •Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all costs of defense and attorney’s fees incurred in defending against same, arising from and related to implementation of the approved traffic control plans including claims arising from towing of private vehicles and the acts of the Applicant’s agents and employees. •The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable attorney’s fees and litigation costs incurred resulting from such claim. •In the event any claim or suit is brought against the City within the scope of this Agreement, Applicant will pay for legal counsel chosen by the City to defend against same. •Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or pedestrian safety or travel. •Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council. •Approved Temporary TCP must be at the work site during work hours. •Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or walkway is impeded to safely redirect pedestrians around a work zone. •Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous place on the vehicle or equipment. In the case of Temporary No Parking Zones, all the following apply in addition to previous: •Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for vacate parking or curb lane usage. •Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block seventy-two (72) hours in advance of effective date and time. •The cover sheet of this TCP form must be attached to each Temporary No Parking Sign on the project site. •Temporary traffic control devices must be removed immediately when work is done or no construction activities are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555 NE 2nd Street; 425-430-7423). _______________________________ _______________________________ _______________________ Applicant’s Signature Print Name Date Carly Nations 3/5/21 TRAFFIC CONTROL PLAN TCP−1 1TRAFFIC CONTROL PLAN SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ ONE−LANE, TWO−WAY TRAFFIC CONTROL WITH FLAGGERS LEGEND TRAFFIC CONTROL PLAN TCP−2 1TRAFFIC CONTROL PLAN SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ ONE−LANE, TWO−WAY TRAFFIC CONTROL WITH FLAGGERS LEGEND TRAFFIC CONTROL PLAN TCP−3 1TRAFFIC CONTROL PLAN SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ ONE−LANE, TWO−WAY TRAFFIC CONTROL WITH FLAGGERS LEGEND TITLE SHEET T−1 DRAWING INDEX SITE INFORMATION PROJECT CONTACTS DRIVING DIRECTIONS VICINITY MAP APPROVAL/SIGN OFF SITE PHOTO SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ NW−WA−STTRNT02−VZW NODE 00300 CITY OF RENTON LIGHT POLE: 1052D SITE COORDINATES LATITUDE: 47° 29’ 51.21" N (47.497557°) LONGITUDE: 122° 11’ 44.26" W (−122.195629°) SITE ADDRESS ADJACENT TO ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 SITE REVISED 100% CONSTRUCTION DRAWINGS SC21000973 GENERAL NOTES G−1CALL AT LEAST TWO WORKING DAYS BEFORE YOU DIG DIG ALERT LIMITS OF LIABILITY:ABBREVIATIONS: CONTRACT DOCUMENTS: ADMINISTRATIVE REQUIREMENTS: SITE SAFETY: WORK REQUIREMENTS: UTILITY REQUIREMENTS: SPECIAL CONSIDERATIONS FOR WEATHERPROOFING: CAST−IN PLACE CONCRETE: “” CONCRETE OR MASONRY ANCHORAGE: REINFORCING STEEL: CONCRETE SLABS ON GRADE: EXISTING STRUCTURES: LEGEND: SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ SITE PLAN A−1 1SITE PLAN SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ VICINITY MAP SITE existing service cabinet is not metered. contractor shall determine if the service entrance conductors need to be upgraded to accommodate the new 200a metered service cabinet. contractor shall coordinate the new meter installation with pse prior to power being disconnected. contractor to confirm that the service entrance conduit in the existing foundation will properly align with the service wireway of the new cabinet. if this is not achievable, a new foundation shall be constructed per c.o.r. standard plans 126.1 and 126.2 service cabinet grounding shall be per wsdot standard plan j-60.05, sheet 3 contractor shall identify all loads that will be affected during power interruptions ENLARGED SITE PLAN, EQUIPMENT & ANTENNA LEVELS A−2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1ENLARGED SITE PLAN2PROPOSED EQUIPMENT LEVEL PROPOSED ANTENNA LEVEL 3 RAD CENTER OF 5G ANTENNAS @ 40’−3" A.G.L. recommend verifying location of water main. GIS and as-builds indicate the water main is within the roadway not the sidewalk. as depicted the foundation would be in conflict with the water main. EXISTING & PROPOSED NORTHEAST ELEVATION A−3 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 2PROPOSED NORTHEAST ELEVATION EXISTING NORTHEAST ELEVATION 1 note a portion of this conduit is part of COR std. plan 117.1A and is permitted for install as part of the SC permit. EXISTING & PROPOSED NORTHWEST ELEVATION A−4 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 12EXISTING NORTHWEST ELEVATIONPROPOSED NORTHWEST ELEVATION VALMONT POLE DESIGN A−5 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ tx VALMONT POLE DESIGN A−5.1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ VALMONT POLE FOUNDATION DESIGN A−5.2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 117.1 A & 117.1B DETAIL A−5.3std plan was updated 7/27/2022. use current plan. Transmitting Antenna(s) Radio frequency fields above this point MAY EXCEED the FCC occupational exposure limit. Obey all posted signs and site guidelines. Call Verizon Wireless at 1-800-264-6620 PRIOR to working beyond this point. STATE:SWITCH: SITE ID: SECTOR/NODE: DETAILS A−6 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 3COMBINED PANEL ANTENNA/RRU SPECIFICATIONS PROPOSED ANTENNA CONFIGURATION AND CABLE SCHEDULE 1ANTENNA SCHEDULE 5RF CAUTION SIGNAGE 2NODE ID SIGNAGE 75G TOP SHROUD 6DISCONNECT 4FIBER TRAY NOTE(S): 1. CLEAR NOTICE STICKER W/ WHITE LETTERING 2. LOCATED AT BASE OF LIGHT POLE 3. PROVIDED BY VERIZON WIRELESS NOTE(S): 1. CLEAR STICKER W/ WHITE LETTERING 2. LOCATED AT BASE OF LIGHT POLE 3. MADE OF WEATHER AND CORROSIVE RESISTANT MATERIAL DETAILS A−7 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL TRANSVERSE PATCH 2TYPICAL LONGITUDINAL PATCH FOR FLEXIBLE PAVEMENT 3TYP LONGITUDINAL PATCH & OVERLAY FOR FLEXIBLE PAVEMENT DETAILS A−7.1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL CURB AND GUTTER REPLACEMENT 4JUNCTION BOX IN CONCRETE PAD2TYPICAL PATCH FOR RIGID PAVEMENT 3UTILITY IN CONCRETE SIDEWALK RF WIRING DIAGRAM A−8 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 2NOT USED15G WIRING DIAGRAM POWER SITE PLAN E−1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1POWER SITE PLAN contractor to confirm that the service entrance conduit in the existing foundation will properly align with the service wireway of the new cabinet. if this is not achievable, a new foundation shall be constructed per c.o.r. standard plans 126.1 and 126.2 existing service cabinet is not metered. contractor shall determine if the service entrance conductors need to be upgraded to accommodate the new 200a metered service cabinet. contractor shall coordinate the new meter installation with pse prior to power being disconnected. service cabinet grounding shall be per wsdot standard plan j-60.05, sheet 3 contractor shall identify all loads that will be affected during power interruptions GROUNDING DIAGRAM & ONE−LINE DIAGRAM E−2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL GROUNDING DIAGRAM2ONE−LINE DIAGRAM LEGEND contractor shall coordinate the new meter installation with pse prior to power being disconnected. existing service cabinet is not metered. contractor shall determine if the service entrance conductors need to be upgraded to accommodate the new 200a metered service cabinet. contractor to confirm that the service entrance conduit in the existing foundation will properly align with the service wireway of the new cabinet. if this is not achievable, a new foundation shall be constructed per c.o.r. standard plans 126.1 and 126.2 service cabinet grounding shall be per wsdot standard plan j-60.05, sheet 3 contractor shall identify all loads that will be affected during power interruptions GROUNDING DETAILS E−3 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 3GROUND BAR1GROUNDING NOTES 2CABLE GROUND KIT CONNECTIONS 6HAND HOLE 4POWER & FIBER TRENCHING 5CONDUIT ELEVATION SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ POWER SERVICE CABINET E−4 1POWER SERVICE CABINET (FOR REFERENCE ONLY) ExteNet Systems (California) LLC 2000 Crow Canyon Place #210  San Ramon, CA 94583 720-939-2337  LBeer@extenetsystems.com December 21, 2020 City of Renton 1055 S. Grady Way Renton, WA 98057 (425) 430-7200 Re: Authorization for Glotel to Submit Applications for ExteNet To Whom it May Concern, ExteNet Systems LLC hereby authorizes Glotel to submit any and all required permit applications to the City of Renton on its behalf. Please contact me at 801-910-7949 or rfenton@extnetsystems.com you have any questions. Thank you for your assistance. Sincerely yours, Rachel M. Fenton ExteNet Systems, Inc. External Affairs, West Region Version: March 2021 1 Site License Addendum (Exhibit C to Master License Agreement No. ______________ Between _______________________________ and City of Renton) Company shall apply to the City for approval of this Site License Addendum by filling out the below form and submitting the form to the City for approval with the applicable Administrative Fee. For each Small Cell, the Company shall fill out a Site License Addendum. This Site License Addendum (“Addendum”), made this _____ day of ____________, 20____ (the “Site License Addendum Effective Date”) between the City of Renton, hereinafter designated the “City” and ___________________, d/b/a ________, with its principal offices at _________________________, hereinafter designated “Company”: 1. Addendum. This is a Site License Addendum as referenced in that certain Master License Agreement between The City and Company dated ______________, ____ ("Agreement"). All of the terms and conditions of the Agreement are incorporated hereby by reference and made a part hereof without the necessity of repeating or attaching the Agreement. In the event of a contradiction, modification or inconsistency between the terms of the Agreement and this Addendum, the terms of this Addendum shall govern. Capitalized terms used in this Addendum shall have the same meaning described for them in the Agreement unless otherwise indicated herein. 2.Project Location. Attachment 1 identifies the physical location of the City Poles on which the Site Equipment shall be attached. 3.Project Description. Attachment 2 identifies the Site Equipment to be installed on the City Poles and shall include the construction details (e.g. electrical and fiber connections, antennas, radios and accessory components). If deviating from the standard detail, Company shall provide photo simulations of such Site Equipment attached to the City Poles and a load bearing study. The photo simulations shall include photos indicating the existing City Pole without the Site Equipment and with the proposed Site Equipment attached. If there are any accessory components, for example conduit holding backhaul or electrical, such accessory components shall be depicted in the photo simulations. 4.NIER Report. Company has commissioned an NIER Report for the City Poles. Such report is attached hereto in Attachment 3. 5. Backhaul. Backhaul services shall be provided to the Site Equipment as follows: □underground fiber □ aboveground fiber □ microwave □ other_________________ and from the following entity: __________________________________. Access to the backhaul system shall be separate from the City’s communication and electrical conveyance system. The Company, or its third party contractor, is responsible for the placement and installation of any junction boxes. 6.Electrical Fee. The estimated peak draw power for the Small Cell is _______. The Small Cell electrical usage falls within ____ tier as described in the Fee Schedule. 7.Usage of City-Owned Conduit. Company requests usage of City’s streetlight power conduit. □Yes □No (if yes, see Attachment 4) 5978 ExteNet Systems, LLC 5th December 22 ExteNet Systems, LLC 3030 Warrenville Rd, Ste 340, Lisle, IL 60532 December 18, 2020 ExteNet Systems, LLC 21.6 KwH the 2nd 4 4 Version: March 2021 2 8.Term. The term of this Addendum shall run concurrently with the Agreement and shall terminate upon the Agreement termination unless earlier terminated by a party consistent with the Agreement. 9. Commencement Date. The Company shall notify the City upon the installation of its Site Equipment on the City Pole. 10.Fees. The Rent and Administrative Fee for the Site Equipment installed pursuant to this Addendum shall be in accordance with Section 6 of the Agreement. 11. Counterparts. This Site License Addendum may be signed in counterparts, each of which shall be deemed an original, but all of which will constitute one and the same document. 12. Authority. Each individual executing this Site License Addendum represents and warrants that such individual is duly authorized to execute and delivery this Site License Addendum on behalf of the party it represents. 13. Carrier. The following third-party wireless carrier’s equipment will be located on this City Pole: _____________________________ or □ same as Company. 14. Acknowledgment. Company acknowledges that (i) this Site License Addendum is only effective upon the signatures of both parties and (ii) Company shall not have the right to install its Site Equipment on the City Poles until it has received Government Approvals and complied with the requirements (including any insurance or bonding requirements) of such Government Approvals. EXECUTED to be effective as of the Site License Addendum Effective Date. CITY OF RENTON: ______________________________ By: ___________________________ Name: _________________________ Title:__________________________ COMPANY ______________________________ By: ___________________________ Name: _________________________ Title:__________________________ Exhibits: Attachment 1 – Physical Location of City Poles Attachment 2 – Photo Simulations, Description of Site Equipment and Load Bearing Study Attachment 3 – NIER Report Attachment 4 – Conduit Lease Addendum Haran C. Rashes Associate General Counsel ExteNet Systems, LLC 4 community and economic development nathan janders civil engineer III Nathan Janders Attachment 1 Physical Location of the City Pole Renton Light Pole #: 1052D Nearest Address: 815 Houser Way N, Renton, WA 98057 Nearest APN: 0823059165 Lat/Long: 47.497557° N -122.195629° W Attachment 2 Construction Drawings TITLE SHEET T−1 DRAWING INDEX SITE INFORMATION PROJECT CONTACTS DRIVING DIRECTIONS VICINITY MAP APPROVAL/SIGN OFF SITE PHOTO SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ NW−WA−STTRNT02−VZW NODE 00300 CITY OF RENTON LIGHT POLE: 1052D SITE COORDINATES LATITUDE: 47° 29’ 51.21" N (47.497557°) LONGITUDE: 122° 11’ 44.26" W (−122.195629°) SITE ADDRESS ADJACENT TO ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 SITE REVISED 100% CONSTRUCTION DRAWINGS SC21000973 see comments in file "WINONSC_NODE 00300_100CD_10.17.22 SEALED" GENERAL NOTES G−1CALL AT LEAST TWO WORKING DAYS BEFORE YOU DIG DIG ALERT LIMITS OF LIABILITY:ABBREVIATIONS: CONTRACT DOCUMENTS: ADMINISTRATIVE REQUIREMENTS: SITE SAFETY: WORK REQUIREMENTS: UTILITY REQUIREMENTS: SPECIAL CONSIDERATIONS FOR WEATHERPROOFING: CAST−IN PLACE CONCRETE: “” CONCRETE OR MASONRY ANCHORAGE: REINFORCING STEEL: CONCRETE SLABS ON GRADE: EXISTING STRUCTURES: LEGEND: SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ SITE PLAN A−1 1SITE PLAN SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ VICINITY MAP SITE ENLARGED SITE PLAN, EQUIPMENT & ANTENNA LEVELS A−2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1ENLARGED SITE PLAN2PROPOSED EQUIPMENT LEVEL PROPOSED ANTENNA LEVEL 3 RAD CENTER OF 5G ANTENNAS @ 40’−3" A.G.L. EXISTING & PROPOSED NORTHEAST ELEVATION A−3 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 2PROPOSED NORTHEAST ELEVATION EXISTING NORTHEAST ELEVATION 1 EXISTING & PROPOSED NORTHWEST ELEVATION A−4 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 12EXISTING NORTHWEST ELEVATIONPROPOSED NORTHWEST ELEVATION VALMONT POLE DESIGN A−5 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ VALMONT POLE DESIGN A−5.1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ VALMONT POLE FOUNDATION DESIGN A−5.2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 117.1 A & 117.1B DETAIL A−5.3 Transmitting Antenna(s) Radio frequency fields above this point MAY EXCEED the FCC occupational exposure limit. Obey all posted signs and site guidelines. Call Verizon Wireless at 1-800-264-6620 PRIOR to working beyond this point. STATE:SWITCH: SITE ID: SECTOR/NODE: DETAILS A−6 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 3COMBINED PANEL ANTENNA/RRU SPECIFICATIONS PROPOSED ANTENNA CONFIGURATION AND CABLE SCHEDULE 1ANTENNA SCHEDULE 5RF CAUTION SIGNAGE 2NODE ID SIGNAGE 75G TOP SHROUD 6DISCONNECT 4FIBER TRAY NOTE(S): 1. CLEAR NOTICE STICKER W/ WHITE LETTERING 2. LOCATED AT BASE OF LIGHT POLE 3. PROVIDED BY VERIZON WIRELESS NOTE(S): 1. CLEAR STICKER W/ WHITE LETTERING 2. LOCATED AT BASE OF LIGHT POLE 3. MADE OF WEATHER AND CORROSIVE RESISTANT MATERIAL DETAILS A−7 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL TRANSVERSE PATCH 2TYPICAL LONGITUDINAL PATCH FOR FLEXIBLE PAVEMENT 3TYP LONGITUDINAL PATCH & OVERLAY FOR FLEXIBLE PAVEMENT DETAILS A−7.1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL CURB AND GUTTER REPLACEMENT 4JUNCTION BOX IN CONCRETE PAD2TYPICAL PATCH FOR RIGID PAVEMENT 3UTILITY IN CONCRETE SIDEWALK RF WIRING DIAGRAM A−8 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 2NOT USED15G WIRING DIAGRAM POWER SITE PLAN E−1 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1POWER SITE PLAN GROUNDING DIAGRAM & ONE−LINE DIAGRAM E−2 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 1TYPICAL GROUNDING DIAGRAM2ONE−LINE DIAGRAM LEGEND GROUNDING DETAILS E−3 SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ 3GROUND BAR1GROUNDING NOTES 2CABLE GROUND KIT CONNECTIONS 6HAND HOLE 4POWER & FIBER TRENCHING 5CONDUIT ELEVATION SHEET REVISIONS TITLE GLOTEL PROJECT #:J6633 CITY OF RENTON LIGHT POLE: 1052D ADJACENT ADDRESS: 815 HOUSER WAY N RENTON, WA 98057 KING COUNTY NW−WA−STTRNT02−VZW NODE 00300 >Integrity Delivered™ POWER SERVICE CABINET E−4 1POWER SERVICE CABINET (FOR REFERENCE ONLY) Load Bearing Study and Pole Design Details Typical Power Consumption Table – 5G ONLY Attachment 3 NIER Study Radio Frequency - Electromagnetic Energy (RF-EME) Jurisdictional Report Site No. 632495 NW-WA-WINONASC-00300 Houser Way N Renton, Washington 98057 King County 47° 29' 51.21'' N, -122° 11' 44.26'' W NAD83 EBI Project No. 6221000710 February 25, 2021 Prepared for: ExteNet Systems, Inc 3030 Warrenville Rd # 340 Lisle, Illinois 60532 Prepared by: RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington E B I C o n s u l t i n g TABLE OF CONTENTS EXECUTIVE SUMMARY .................................................................................................................... 1 1.0 SITE DESCRIPTION AND ANTENNA INVENTORY ................................................................. 2 2.0 BACKGROUND INFORMATION AND MODELING PROCEDURE .............................................. 3 3.0 MITIGATION/SITE CONTROL OPTIONS ............................................................................... 4 4.0 SUMMARY AND CONCLUSIONS ............................................................................................ 5 5.0 LIMITATIONS ........................................................................................................................ 5 APPENDICES APPENDIX A CERTIFICATIONS APPENDIX B FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS APPENDIX C RADIO FREQUENCY ELECTROMAGNETIC ENERGY SAFETY / SIGNAGE PLANS RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 1 EXECUTIVE SUMMARY Purpose of Report EnviroBusiness Inc. (dba EBI Consulting) has been contracted by ExteNet Systems, Inc to conduct radio frequency electromagnetic (RF-EME) modeling for ExteNet Site NW-WA-WINONASC-00300 to be located on a light pole at Houser Way N in Renton, Washington to determine RF-EME exposure levels from proposed wireless communications equipment at this site. As described in greater detail in Appendix B, the Federal Communications Commission (FCC) has developed Maximum Permissible Exposure (MPE) Limits for general public exposures and occupational exposures. This report summarizes the results of RF-EME modeling in relation to relevant FCC RF-EME compliance standards for limiting human exposure to RF-EME fields. Modeling results included in this report are based on site node list dated February 18, 2021 as provided to EBI Consulting. Subsequent changes to the drawings or site design may yield changes in the MPE levels or FCC Compliance recommendations. No buildings were identified within 20 feet of the light pole, therefore modeling of adjacent structures was not included in the modeling analysis. Maximum Permissible Exposure (MPE) Summary Location % of FCC General Public/Uncontrolled Exposure Limit % of FCC Occupational/Controlled Exposure Limit Power Density (mW/cm2) Horizontal Approach Distance of Occupational Limit Horizontal Approach Distance of General Public Limit Proposed Verizon Antennas Maximum Antenna Face Value 134.80 26.96 1.3480 N/A 3 Ground Level 0.55 0.11 0.0055 N/A N/A These results are calculated based on max power assumptions for this site. The mounted antennas will contribute the majority to these emissions. Workers accessing any equipment on the light pole should follow all safety procedures outlined by the carrier and property owner. Statement of Compliance Signage recommendations are presented in Section 3.0 to bring the site into compliance with the FCC Rules and Regulations. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 2 1.0 SITE DESCRIPTION AND ANTENNA INVENTORY This project involves the installation of 3 (three) active wireless telecommunication antennas on a light pole at Houser Way N in Renton, Washington. This site is located in the right of way. The antennas are to be mounted on a light pole and operating in the directions, frequencies, and heights mentioned below. Ant # Operator Antenna Make Antenna Model Frequency (MHz) Azimuth (deg.) Aperture (feet) Total Power Input (Watts) Antenna Gain (dBd) Total ERP (Watts) Total EIRP (Watts) 1 Verizon ERICSSON SM6701 28000 0 1.7 0.6 26.01 243.3 399.1 2 Verizon ERICSSON SM6701 28000 120 1.7 0.6 26.01 243.3 399.1 3 Verizon ERICSSON SM6701 28000 240 1.7 0.6 26.01 243.3 399.1 Ant # NAME X Y Antenna Radiation Centerline Z-Height Ground 1 Verizon 45.2 46.1 40.5 39.6 2 Verizon 44.5 44.9 40.5 39.6 3 Verizon 45.9 44.9 40.5 39.6 *Z-Height represents the distance measured from the bottom of the antenna. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 3 2.0 BACKGROUND INFORMATION AND MODELING PROCEDURE EBI has performed theoretical modeling using Roofmaster™ software to estimate the worst-case power density at the site antenna face and ground-level resulting from the operation of the antennas. Using the computational methods set forth in Federal Communications (FCC) Office of Engineering & Technology (OET) Bulletin 65, “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields” (OET-65), Roofmaster™ calculates predicted power density in a scalable grid based on the contributions of all RF sources characterized in the study scenario. At each grid location, the cumulative power density is expressed as a percentage of the FCC limits. Manufacturer antenna pattern data is utilized in these calculations. Roofmaster™ models consist of the Far Field model as specified in OET-65 and an implementation of the OET-65 Cylindrical Model (Sula9). The models utilize several operational specifications for different types of antennas to produce a plot of spatially-averaged power densities that can be expressed as a percentage of the applicable exposure limit. For this report, EBI utilized antenna and power data provided by ExteNet and compared the resultant worst-case MPE levels to the FCC’s occupational/controlled exposure limits outlined in OET Bulletin 65. The assumptions used in the modeling are based upon information provided by ExteNet and information gathered from other sources. The parameters used for modeling are summarized in Section 1.0. A site is considered out of compliance with FCC regulations if there are areas that exceed the FCC exposure limits and there are no RF hazard mitigation measures in place. Any carrier which h as an installation that contributes more than 5% of the applicable MPE must participate in mitigating these RF hazards. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 4 3.0 MITIGATION/SITE CONTROL OPTIONS EBI’s modeling indicates that there are no areas in front of the Verizon antennas that exceed the FCC standards for occupational or general public exposure at ground level. All exposures above the FCC’s safe limits require that individuals be elevated above the ground. In order to alert people accessing the light pole blue notice signs are recommended for installation on opposite sides of the light pole, 3 feet below the lowest antenna (36.6 feet above ground level). To reduce the risk of exposure and/or injury, EBI recommends that access to areas associated with the active antenna installation be restricted and secured where possible. Access to this site is accomplished by approaching the light pole at ground level. Access to the antennas is gained via a lift or climbing with fall protection and therefore the antennas are not considered to be accessible to the general public. Implementation of recommended signage in this report will bring this site into compliance with the FCC’s rules and regulations. Attachment 1: Signage Table Sign Description Posting Instructions Required Signage / Mitigation Blue Notice Sign Used to alert individuals that they are entering an area where the power density emitted from transmitting antenna(s) may exceed the FCC’s maximum permissible exposure limit for the general population. Securely post on opposite sides of the light pole 3.0 feet below the antennas (36.6 feet above ground level). 2 signs posted below the antennas RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 5 4.0 SUMMARY AND CONCLUSIONS EBI has prepared this Radiofrequency – Electromagnetic Energy (RF-EME) Compliance Report for the proposed ExteNet site to be located on a light pole at Houser Way N in Renton, Washington. EBI has conducted theoretical modeling to estimate the worst-case power density from the proposed antennas to document potential MPE levels at this location and to ensure that site control measures are adequate to meet FCC and OSHA requirements. Maximum Permissible Exposure (MPE) Summary Location % of FCC General Public/Uncontrolled Exposure Limit % of FCC Occupational/Controlled Exposure Limit Power Density (mW/cm2) Horizontal Approach Distance of Occupational Limit Horizontal Approach Distance of General Public Limit Proposed Verizon Antennas Maximum Antenna Face Values 134.80 26.96 1.3480 N/A 3 Ground Level 0.55 0.11 0.0055 N/A N/A Workers should be informed about the presence and locations of antennas and their associated fields. Recommended control measures are outlined in Section 3.0. To reduce the risk of exposure and/or injury, EBI recommends that access to areas associated with the active antenna installation be restricted and secured where possible. Implementation of the signage recommended in this report will bring this site into compliance with the FCC’s rules and regulations. 5.0 LIMITATIONS This report was prepared for the use of ExteNet. It was performed in accordance with generally accepted practices of other consultants undertaking similar studies at the same time and in the same locale under like circumstances. The conclusions provided by EBI are based solely on the information provided by the client. The observations in this report are valid on the date of the investigation. Any additional information that becomes available concerning the site should be provided to EBI so that our conclusions may be revised and modified, if necessary. This report has been prepared in accordance with Standard Conditions for Engagement and authorized proposal, both of which are integral parts of this report. No other warranty, expressed or implied, is made. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Appendix A Certifications RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Preparer Certification I, Erik Johnson, state that: ▪ I am an employee of EnviroBusiness Inc. (d/b/a EBI Consulting), which provides RF-EME safety and compliance services to the wireless communications industry. ▪ I have successfully completed RF-EME safety training, and I am aware of the potential hazards from RF-EME and would be classified “occupational” under the FCC regulations. ▪ I am fully aware of and familiar with the Rules and Regulations of both the Federal Communications Commissions (FCC) and the Occupational Safety and Health Administration (OSHA) with regard to Human Exposure to Radio Frequency Radiation. ▪ I have been trained on RF-EME modeling using Roofmaster™ modeling software. ▪ I have reviewed the data provided by the client and incorporated it into this Site Compliance Report such that the information contained in this report is true and accurate to the best of my knowledge. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Appendix B Federal Communications Commission (FCC) Requirements RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 The FCC has established Maximum Permissible Exposure (MPE) limits for human exposure to Radiofrequency Electromagnetic (RF-EME) energy fields, based on exposure limits recommended by the National Council on Radiation Protection and Measurements (NCRP) and, over a wide range of frequencies, the exposure limits developed by the Institute of Electrical and Electronics Engineers, Inc. (IEEE) and adopted by the American National Standards Institute (ANSI) to replace the 1982 ANSI guidelines. Limits for localized absorption are based on recommendations of both ANSI/IEEE and NCRP. The FCC guidelines incorporate two separate tiers of exposure limits that are based upon occupational/controlled exposure limits (for workers) and general public/uncontrolled exposure limits for members of the general public. Occupational/controlled exposure limits apply to situations in which persons are exposed as a consequence of their employment and in which those persons who are exposed have been made fully aware of the potential for exposure and can exercise control over their exposure. Occupational/ controlled exposure limits also apply where exposure is of a transient nature as a result of incidental passage through a location where exposure levels may be above general public/uncontrolled limits (see below), as long as the exposed person has been made fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. General public/uncontrolled exposure limits apply to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Therefore, members of the general public would always be considered under this category when exposure is not employment-related, for example, in the case of a telecommunications tower that exposes persons in a nearby residential area. Table 1 and Figure 1 (below), which are included within the FCC’s OET Bulletin 65, summarize the MPE limits for RF emissions. These limits are designed to provide a substantial margin of safety. They vary by frequency to take into account the different types of equipment that may be in operation at a particular facility and are “time-averaged” limits to reflect different durations resulting from controlled and uncontrolled exposures. The FCC’s MPEs are measured in terms of power (mW) over a unit surface area (cm2). Known as the power density, the FCC has established an occupational MPE of 5 milliwatts per square centimeter (mW/cm2) and an uncontrolled MPE of 1 mW/cm2 for equipment operating in the 1900 MHz frequency range. Equipment operating in the 700 MHz frequency range has an established occupational MPE of 2.33 (mW/cm2) and a general public MPE of 0.47 mW/cm2, equipment operating in the 850 MHz frequency range the occupational MPE is 2.83 mW/cm2 and the general public MPE is 0.57 mW/cm2, and equipment operating in the 1900 and 2100 MHz frequency range the occupational MPE is 5 mW/cm2 and general public MPE is 1 mW/cm2. These limits are considered protective of these populations. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Table 1: Limits for Maximum Permissible Exposure (MPE) (A) Limits for Occupational/Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Time [E]2, [H]2, or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f2)* 6 30-300 61.4 0.163 1.0 6 300-I,500 -- -- f/300 6 1,500-100,000 -- -- 5 6 (B) Limits for General Public/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm2) Averaging Time [E]2, [H]2, or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1,500 -- -- f/1,500 30 1,500-100,000 -- -- 1.0 30 f = Frequency in (MHz) * Plane-wave equivalent power density Power Density (mW/cm2) RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Based on the above, the most restrictive thresholds for exposures of unlimited duration to RF energy for several personal wireless services are summarized below: Personal Wireless Service Approximate Frequency Occupational MPE Public MPE Microwave (Point-to-Point) 5,000 - 80,000 MHz 5.00 mW/cm2 1.00 mW/cm2 Broadband Radio (BRS) 2,600 MHz 5.00 mW/cm2 1.00 mW/cm2 Wireless Communication (WCS) 2,300 MHz 5.00 mW/cm2 1.00 mW/cm2 Advanced Wireless (AWS) 2,100 MHz 5.00 mW/cm2 1.00 mW/cm2 Personal Communication (PCS) 1,950 MHz 5.00 mW/cm2 1.00 mW/cm2 Cellular Telephone 870 MHz 2.90 mW/cm2 0.58 mW/cm2 Specialized Mobile Radio (SMR) 855 MHz 2.85 mW/cm2 0.57 mW/cm2 Long Term Evolution (LTE) 700 MHz 2.33 mW/cm2 0.47 mW/cm2 Most Restrictive Frequency Range 30-300 MHz 1.00 mW/cm2 0.20 mW/cm2 MPE limits are designed to provide a substantial margin of safety. These limits apply for continuous exposures and are intended to provide a prudent margin of safety for all persons, regardless of age, gender, size, or health. Personal Communication Services (PCS) facilities operate within a frequency range of 1850 -1990 MHz. Facilities typically consist of: 1) electronic transceivers (the radios or cabinets) connected to wired telephone lines; and 2) antennas that send the wireless signals created by the transceivers to be received by individual subscriber units (PCS telephones). Transceivers are typically connected to antennas by coaxial cables. Advanced Wireless Services (AWS) facilities operate within a frequency range of 2155-2180 MHz. Facilities typically consist of: 1) electronic transceivers (the radios or cabinets); and 2) antennas that send the wireless signals created by the transceivers to be received by individual subscriber units. Transceivers are typically connected to antennas by coaxial cables. Because of the short wavelength of PCS/AWS services, the antennas require line-of-site paths for good propagation, and are typically installed above ground level. Antennas are constructed to concentrate energy towards the horizon, with as little energy as possible scattered towards the ground or the sky. This design, combined with the low power of PCS facilities, generally results in no possibility for exposure to approach Maximum Permissible Exposure (MPE) levels, with the exception of areas directly in front of the antennas. FCC Compliance Requirement A site is considered out of compliance with FCC regulations if there are areas that exceed the FCC exposure limits and there are no RF hazard mitigation measures in place. Any carrier which has an installation that contributes more than 5% of the applicable MPE must participate in mitigating these RF hazards. RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Appendix C Radio Frequency Electromagnetic Energy Safety Information and Signage Plans RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Antenna Face Simulation RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Ground Level Simulation RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Elevation Simulation and Signage Plan Sign Description Posting Instructions Required Signage / Mitigation Blue Notice Sign Used to alert individuals that they are entering an area where the power density emitted from transmitting antenna(s) may exceed the FCC’s maximum permissible exposure limit for the general population. Securely post on opposite sides of the light pole 3.0 feet below the antennas (36.6 feet above ground level). 2 signs posted below the antennas Post on opposite sides of the light pole 3.0’ below the antennas RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 RF Signage and Safety Information RF Signage Areas or portions of any transmitter site may be susceptible to high power densities that could cause personnel exposures in excess of the FCC guidelines. These areas must be demarcated by conspicuously posted signage that identifies the potential exposure. Signage MUST be viewable regardless of the viewer’s position. GUIDELINES NOTICE CAUTION WARNING This sign will inform anyone of the basic precautions to follow when entering an access point to an area with transmitting radiofrequency equipment. This sign indicates that RF emissions may exceed the FCC General Population MPE limit. This sign indicates that RF emissions may exceed the FCC Occupational MPE limit. This sign indicates that RF emissions may exceed at least 10x the FCC Occupational MPE limit. NOC INFORMATION Information signs are used as a means to provide contact information for any questions or concerns. They will include specific cell site identification information and the Verizon Wireless Network Operations Center phone number. Physical Barriers Physical barriers are control measures that require awareness and participation of personnel. Physical barriers are employed as an additional administration control to complement RF signage and physically demarcate an area in which RF exposure levels may exceed the FCC General Population limit. Example: chain-connected stanchions Indicative Markers Indicative markers are visible control measures that require awareness and participation of personnel, as they cannot physically prevent someone from entering an area of potential concern. Indicative markers are employed as an additional administration control to complement RF signage and visually demarcate an area in which RF exposure levels may exceed the FCC General Population limit. Example: paint stripes Occupational Safety and Health Administration (OSHA) Requirements A formal adopter of FCC Standards, OSHA stipulates that those in the Occupational classification must complete training in the following: RF Safety, RF Awareness, and Utilization of Personal Protective Equipment. OSHA also provides options for Hazard Prevention and Control: Hazard Prevention Control • Utilization of good equipment • Enact control of hazard areas • Limit exposures • Employ medical surveillance and accident response • Employ Lockout/Tag out • Utilize personal alarms & protective clothing • Prevent access to hazardous locations • Develop or operate an administrative control program RF-EME Compliance Report Site No. 632495 EBI Project No. 6221000710 Houser Way N, Renton, Washington EBI Consulting  21 B Street  Burlington, MA 01803  1.800.786.2346 Aerial View of Antenna Face Level Simulation DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT Conditions for Permit SC21000973 Engineering 1 A contractor with an approved State and City business license will be required prior to the start of any work in the ROW. not satisfied 2 No site work shall take place until a conduit sharing agreement has been provided by the applicant on a form acceptable to the City. The City will not execute SLA until such time that the agreement is provided. Applicant may resubmit construction plans without a shared conduit to satisfy condition not satisfied Page 1 of 1 DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT : SC21000973 Page 2 of 2THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES 1 OF 6 RENTON UTILIGI CONTACT MICHAEL PASICH UTILIGI COMMUNICATIONS OFFICE: (253) 863-3881 MICHAEL.PASICH@UTILIGI.COM COMCAST CONTACT: RUSS CARVER COMCAST CABLE OFFICE (425) 263-5365 RUSS_CARVER@COMCAST.NET SHEET NUMBER: CLIENT: PREPARED BY: COMMUNICATIONS PROJECT FOOTAGE PROJECT ROUTE MAP DRAWING INDEXPROJECT TEAM PROJECT DESCRIPTION PERMIT JURISDICTION:PROJECT ADDRESS ACROSS N 8TH ST FROM 801 HOUSER WAY N, RENTON, WA 98057*ALL FOOTAGES AND MATERIALS ARE ESTIMATED NEW AERIAL / OVERLASH *ALL FOOTAGES AND MATERIALS ARE ESTIMATED TOTAL FOOTAGE = = = = = TYPE LENGTH = NEW UNDERGROUND NEW RISERS EXISTING AERIAL / OVERLASH EXISTING UNDERGROUND EXISTING RISERS 0 FT 9 FT 0 FT 0 FT 0 FT 0 FT = 9 FT = = PRIV. PROP. AERIAL / OVERLASH PRIV. PROP. UNDERGROUND 0 FT 0 FT =PRIV. PROP. RISERS 0 FT PROJECT NUMBER: JN2253010337 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 - PAGE 1 3 DESCRIPTION PROJECT INFORMATION GENERAL NOTES - 4 - 5 PROJECT OVERVIEW - ROUTE -6 DETAILED UNDERGROUND PLAN - - 2 SYMBOLS LEGEND -TCP 1 TRAFFIC CONTROL PLAN(S) (WZSP) DETAILED RESTORATION PLAN PROPOSED ROUTE (TYP.) P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 N EXTENET TO INSTALL NEW SCHEDULE 80 CONDUIT FROM EXISTING CITY OF RENTON POWER SERVICE CABINET TO EXISTING POWER VAULT LINETYPES EDGE OF PAVEMENT EOP EOP SYMBOLS EXISTING H CATV CATV P 2Ø CATV V CATV COM V COM HH COM COM 253TA COM 444LA C COM TELEPHONE POLE POWER VAULT POWER TRANS V POWER 2"Ø POWER POWER SEWER D CB STORM DRAIN GAS-OIL WATER LANDSCAPE ROAD FEATURES STATION MONUMENTMON. STA 0+00 STRAIGHT TRAFFIC ARROW LEFT TURN ARROW RIGHT TURN ARROW LEFT AND RIGHT TURN ARROW LEFT, RIGHT, AND STRAIGHT ARROW LEFT TURN AND STRAIGHT ARROW RIGHT TURN AND STRAIGHT ARROW BICYCLE LANE HANDICAP LABEL PROPOSED P V R4"Ø 253TA VAULT 444LA VAULT C CABINET H ABBREVIATIONS HATCH PATTERNS PRINCIPAL ARTERIALS MINOR ARTERIALS COLLECTOR ARTERIALS INTERSTATE FREEWAYS ACCESS STREETS (BOTH RESIDENTIAL AND COMMERCIAL) DIRECTIONAL BORE LANDSCAPE SIDEWALK/DRIVEWAY FOGLINE FL FL FL FL WATER W W W W IRRIGATION IRR IRR IRR IRR IRR SEWER S S S S POWER / ELECTRIC P P P P COMMUNICATIONS C C C C GAS / OIL G G G G DRAIN D D D D DRAINAGE DITCH DD DD DD DD DD DD DD DD DD DD DD DD ROCKERY DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDPROPOSED ROUTE RIGHT OF WAY ROW ROW CONES TREE PROTECTION FENCE X X X X X X LIMITS OF CONCRETE PANEL BP-01 V-## BORE 1 MP-01 2 OF 6 SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE:SYMBOLS LEGEND Know what's below. before you digCall RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 MAGNETIC LOCATOR TAPE (ENTIRE TRENCH LENGTH) 6-12"18"36" OF COVEREXISTING SURFACE CONTRACTOR TO VERIFY SPECIFICATION WITH LOCAL JURISDICTION. PROPOSED CONDUIT RESTORE SIDEWALK PER STANDARD PLAN NO. 420. TRENCH BACKFILL SHALL CONSIST OF CDF PER CITY OF SEATTLE STANDARD SPECIFICATION 2-10.2(3)A2 IF TRENCH TAKES PLACE WITHIN PLANTING STRIP. NATIVE SOILS OR TYPE 17 WITHIN ROW TREE DRIP LINE AREAS. NO COMPACTION AROUND EXISTING TREE ROOTS.SEE SDOT STANDARD 142 FOR RESTORATION DETAIL. SURFACE RESTORATION 18"PROPOSED FIBER EXISTING GROUND EXISTING UTILITY POLE TYPE C STEEL-TO-STEEL ADAPTER DETAIL 01 TYPICAL TRENCH 3'R, 90° STEEL (1) 10' STEEL CONDUIT SECTIONS 15" HDG POLE BRACKET W/ PIPE CLAMP (B2017 BY POWER-STRUT OR EQUAL) 4" MIN. OFFSET FROM POLE TYPE C STEEL-TO-PVC ADAPTER.22' (TYP.)24' (TYP.)HEIGHT VARIES(1) 10' PVC CONDUIT SECTION DETAIL 04 POLE RISERS (1) 4"Ø DETAIL 02 TYPICAL SHORING WALE UPRIGHT SHEETING PNEUMATIC/HYDRAULIC JACK OR SCREW JACK I. GENERAL 1. THE LOCATION OF UTILITIES SHOWN ON THE PLANS ARE APPROXIMATE. ALL UTILITIES LOCATIONS SHALL BE VERIFIED PRIOR TO CONSTRUCTION. THE CONTRACTOR, AT HIS OWN EXPENSE, SHALL MAKE EXCAVATIONS AND BORINGS AHEAD OF THE WORK, AS NECESSARY, TO DETERMINE THE EXACT LOCATIONS OF UTILITIES AND UNDERGROUND STRUCTURES. IT IS UNDERSTOOD THAT THERE WILL BE INTERFERING UTILITIES AND OTHER UNDERGROUND PIPES, DRAINS OR STRUCTURES ENCOUNTERED THAT ARE NOT SHOWN OR AREAS SHOWN INCORRECTLY ON THE PLANS OR THAT HAVE NOT BEEN PREVIOUSLY DISCOVERED IN THE FIELD. THE CONTRACTOR AGREES THIS IS A NORMAL AND USUAL OCCURRENCE IN THE CONSTRUCTION OF UNDERGROUND IMPROVEMENTS. FURTHERMORE, BIDDERS UNDERSTAND AND AGREE THAT WORK IN SOME CASES MUST BE DONE IN CLOSE PROXIMITY TO SAID UTILITIES AND UNDERGROUND PIPES, DRAINS AND STRUCTURES NOT SHOWN ON THE PLANS WHICH MAY REQUIRE A CHANGE IN OPERATIONS AND MAY CAUSE SLOUGHING OF THE TRENCH, ADDITIONAL TRAFFIC CONTROL, ADDITIONAL PAVEMENT AND BACKFILL COSTS AND TIME. THE CONTRACTOR AGREES THAT A REASONABLE NUMBER OF THESE OCCURRENCES IS USUAL AND ORDINARY, AND ARE REFLECTED IN THE BID AND PLAN OF OPERATION. THE BIDDERS AGREE TO PROVIDE FOR THESE CONFLICTS AND AGREES TO PROVIDE FOR A REASONABLE AMOUNT OF TIME FOR DESIGN CHANGES AND/OR UTILITY RELOCATIONS DUE TO SAID CONFLICTS. 2. CALL THE UTILITIES UNDERGROUND LOCATION CENTER AT 811 3. INSPECTION -- THE CONTRACTOR SHALL NOTIFY LOCAL JURISDICTIONS FOR REQUIRED INSPECTION SERVICES. 4. EXCESS WATER -- SHALL WATER BE ENCOUNTERED DURING CONSTRUCTION, IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO DEWATER, AS PER THE STANDARD SPECIFICATIONS, BEFORE CONSTRUCTION CONTINUES. 5. NO SILT LADEN WATER IS TO BE DISCHARGED FROM THE SITE WITHOUT PASSING THROUGH AN EROSION CONTROL SYSTEM. 6. THE CONTRACTOR SHALL SCHEDULE AND CONTROL HIS WORK SO AS TO COMPLY WITH ALL APPLICABLE ORDINANCES TO PREVENT ANY HAZARDS TO PUBLIC SAFETY, HEALTH AND WELFARE. 7. ALL STREETS SHALL BE KEPT FREE OF DIRT AND DEBRIS ON A CONTINUOUS BASIS. 8. AN APPROVED COPY OF THESE PLANS WILL BE ON THE JOB SITE WHENEVER CONSTRUCTION IS IN PROGRESS. 9. THE CONTRACTOR SHALL BE SOLELY AND COMPLETELY RESPONSIBLE FOR THE CONDITION OF THE JOB SITE, INCLUDING SAFETY OF ALL PERSONS AND PROPERTY DURING THE PERFORMANCE OF THE WORK. THIS REQUIREMENT WILL APPLY CONTINUOUSLY AND NOT BE LIMITED TO NORMAL WORKING HOURS. 10. PEDESTRIAN AND VEHICULAR ACCESS TO ADJACENT PROPERTIES SHALL BE MAINTAINED AT ALL TIMES EXCEPT WHERE PRIOR WRITTEN APPROVAL FROM THE PROPERTY OWNER HAS BEEN OBTAINED. 11. BARRICADE OPEN DEPRESSIONS AND HOLES OCCURRING AS PART OF THIS WORK, AND POST WARNING LIGHTS ON ADJACENT PROPERTIES WITH PUBLIC ACCESS. OPERATE WARNING LIGHTS DURING HOURS FROM DUSK TO DAWN EACH DAY AND AS OTHERWISE REQUIRED. 12. PROTECT STRUCTURES, UTILITIES, PAVEMENTS, AND OTHER FACILITIES FROM DAMAGE CAUSED BY SETTLEMENT, LATERAL MOVEMENT, UNDERMINING WASHOUT AND OTHER HAZARDS CREATED BY OPERATIONS UNDER THIS SECTION. II.TRAFFIC CONTROL 1. THE CONTRACTOR IS ADVISED THAT ALL LANE CLOSURES SHALL BE KEPT TO A MINIMUM. LOCAL JURISDICTIONS WILL APPROVE ONLY THOSE LANE AND ROADWAY CLOSURES DETERMINED TO BE NECESSARY FOR THE CONTRACTOR TO ACCOMPLISH A SPECIFIC TASK. NO LANE OR ROADWAY CLOSURES WILL BE PERMITTED WITHOUT PRIOR APPROVALS. 2. THE CONTRACTOR SHALL KEEP ALL TRAFFIC LANES AND SHOULDERS CLEAR OF EQUIPMENT AND MATERIALS DURING NON-WORKING HOURS. EQUIPMENT AND MATERIALS SHALL NOT BE STORED ON THE STREETS. THE CONTRACTOR'S EMPLOYEES AND AGENTS SHALL NOT PARK PRIVATE VEHICLES ALONG THE ROADWAY OR MEDIAN. III.SITE PREPARATION 1. SOD AND LAWN TO BE REMOVED SHALL BE CUT TO A NEAT VERTICAL LINE 6" MINIMUM BEYOND THE TRENCH LINE. SOD SHALL BE EITHER REMOVED FROM THE SITE, OR CAREFULLY STOCKPILED FOR REUSE. 2. SAW CUT PAVEMENT TO A NEAT VERTICAL LINE 8" TO 12" MINIMUM BEYOND THE TRENCH LINE. REPLACE PAVEMENT WITH LIKE MATERIAL (I.E., ASPHALT WITH ASPHALT, CONCRETE WITH CONCRETE). 3. EXCEPT AS NOTED HEREIN, ALL MATERIAL REMOVED SHALL BE TAKEN FROM THE SITE AND DISPOSED OF BY THE CONTRACTOR. IV.TRENCH EXCAVATION AND BACKFILL 1. TRENCH BACKFILL - WHERE MATERIAL EXCAVATED FROM TRENCHES IS UNSUITABLE FOR BACKFILL, THE CONTRACTOR SHALL BACKFILL WITH BANK RUN GRAVEL OR MAY ELECT TO USE CDF IN LIEU OF THE COMPACTION/PROCTOR PROCESS. STONEWAY MIX 351 IS ACCEPTABLE IN ALL LOCATIONS. QUICK SETTING MIX 1004 IS ACCEPTABLE IN NON-TRAFFIC AREAS. MIX 1121 IS TO BE USED IN TRAFFIC-BEARING LOCATIONS. 2. COMPACTION, WHEN NECESSARY, SHALL BE PERFORMED IN ACCORDANCE WITH LOCAL REQUIREMENTS. V.UTILITY DUCT 1. BURIED DUCT SHALL BE (2) 1-1/4" HDPE. MINIMUM COVER SHALL BE 36" WITH A MINIMUM SLOPE OF 1/2 % TO VAULT. 2. THOROUGHLY CLEAN CONDUIT BEFORE USING OR LAYING. DURING CONSTRUCTION AND AFTER THE DUCT LINE IS COMPLETED, PLUG ENDS OF CONDUITS TO PREVENT WATER WASHING INTO CONDUIT OR MANHOLES, TAKE PARTICULAR CARE TO KEEP CONDUITS CLEAR OF CONCRETE, DIRT AND ANY OTHER SUBSTANCE DURING THE COURSE OF CONSTRUCTION. 3. AFTER DUCT PLACEMENT HAS BEEN COMPLETED, PROOF AND CLEAN DEBRIS FROM EACH DUCT, ITS ENTIRE LENGTH. INSTALL PULL ROPE AND PLACE WATERTIGHT COMPRESSION PLUGS AT BOTH ENDS. ANY CONDUITS CONTAINING FIBER CABLE WILL REQUIRE SIMPLEX COMPRESSION PLUGS SEALING THE CONDUITS AROUND THE CABLE. 4. OUTSIDE INNERDUCT SHALL BE 1 1/4" OPTIC-GUARD NON-METALLIC FLEXIBLE, IN COLOR SUCH AS RED OR ORANGE, WITH PULL ROPES & PLUGS. EXPOSED INNERDUCT INSIDE OF BUILDINGS SHALL BE PLENUM-RATED. 5. ALL RISERS MORE THAN 50' FROM A VAULT OR A PULL POINT ARE TO BE 4" SCHEDULE 80 PVC STOPPED AT THE BASE OF THE POLE WITH (2) 1-1/4" HDPE DUCTS PASSING THROUGH. RISERS WITHIN 50' OF A VAULT WILL BE 4" SCHEDULE 80 PVC CONDUIT WITH (2) 1-1/4" INNERDUCTS PASSING THROUGH. VI. CONCRETE CEMENT PAVEMENT 1. ALL CONCRETE CEMENT PAVEMENT REMOVED OR DAMAGED BY THIS WORK SHALL BE REPLACED ACCORDING TO THE STANDARD SPECIFICATIONS OF EACH CITY OR COUNTY. VII. ASPHALT CEMENT PAVEMENT 1. ALL ASPHALT CEMENT PAVEMENT REMOVED OR DAMAGED BY THIS WORK SHALL BE REPLACED ACCORDING TO THE REQUIREMENTS OF EACH CITY OR COUNTY. VIII. GRAVEL AREAS 1. ALL GRAVEL AREAS DAMAGED OR REMOVED BY THIS WORK SHALL BE REPLACED WITH CRUSHED SURFACING TOP COURSE IN ACCORDANCE WITH THE REQUIREMENTS OF EACH CITY OR COUNTY. IX. SITE RESTORATION 1. ALL DISTURBED OR DAMAGED AREAS SHALL BE RESTORED TO A CONDITION EQUAL TO, OR BETTER THAN, THAT WHICH EXISTED PRIOR TO PLACEMENT OF THE CONDUIT AND STRUCTURES. 2. VEGETATION REMOVED FOR THIS WORK SHALL BE REPLACED WITH IN-KIND PLANT MATERIAL AND SHALL BE PROPERLY PLANTED AND WATERED IN TO ENSURE ITS SURVIVAL. 3. SITE RESTORATION SHALL INCLUDE REPLACING EXISTING CABLING AND PULL ROPES IN EXISTING CONDUITS AS THEY EXISTED PRIOR TO CONSTRUCTION. X. WATER QUALITY 1. CONSTRUCTION ACTIVITIES OCCURRING ADJACENT TO STORM DRAINAGE STRUCTURES SHALL COMPLY WITH THE STATE OF WASHINGTON'S WATER QUALITY STANDARDS. 2. THE CONTRACTOR SHALL LIMIT THE USE OF PETROLEUM PRODUCTS ON THE SITE. XI.BORING 1. WHEN BORING ROADWAYS, INSTALL 2-1 1/4" HDPE CONDUITS WITH PULL ROPES AND PLUGS. 2. PROTECT EXISTING UTILITIES -- COORDINATE WITH LOCAL JURISDICTIONS TO POTHOLE AS REQUIRED TO LOCATE EXISTING UTILITIES. XII. FIRE PROTECTION 1. ALL INSTALLED BACKBOARDS SHALL BE PAINTED WITH FIRE-RESISTANT PAINT. 2. ALL FIRE SEALED DUCT ENDS AND CORES SHALL BE 2 HOUR FIRE-RATED. ALL FIRE SEAL IN EXISTING LOCATIONS SHALL BE REPAIRED OR REPLACED UPON DUCT OR CABLE PLACEMENT. XIII. AERIAL 1. ALL AERIAL CONSTRUCTION IS TO BE PERFORMED TO INDUSTRY ACCEPTABLE STANDARDS. 2. ALL NEW AERIAL (AND EXISTING) CABLE HEIGHTS OF ATTACHMENT TO BE DOCUMENTED AT TIME OF CONSTRUCTION. 3. 6.6 MM STRAND TO BE USED WITH STANDARD 5/8" POLE LINE HARDWARE UNLESS OTHERWISE SPECIFIED. BOND STRAND TO POWER MAIN WHERE APPLICABLE. 4. ALL ANCHORS TO BE USED WILL BE 3/4" SCREW TYPE. 5. IT IS THE CONTRACTOR'S RESPONSIBILITY TO MAINTAIN AND FOLLOW ALL NESC CODES ALONG WITH APPLICABLE LOCAL AND REGIONAL GOVERNING AUTHORITIES. ANY DISCREPANCIES BETWEEN THESE AUTHORITIES AND OR THE CONSTRUCTION PERMITS IS TO BE VALIDATED WITH THE DESIGNER OR ENGINEER PRIOR TO CONSTRUCTION. MISSILE PIT DETAIL NOT TO SCALE TYPICAL BORE COVER PLAN VIEW 4" MIN SHADING CLEAN NATIVE SOIL, SAND, OR 5/8" MINUS 2" MIN BEDDING CLEAN NATIVE SOIL, SAND, OR 5/8" MINUS. 36" MIN COVER 24" TYPICAL (6" MIN)FINAL GRADE BACKFILL HARD SURFACE W/ CRUSHED ROCK 5/8" MINUS. BACKFILL SOFT SURFACE WITH CLEAN NATURAL MATERAL. BACK FILL SHALL NOT DAMAGE THE CONDUIT. FINAL GRADE 36" MIN COVER 24" TYPICAL (6" MIN)8' LONGWILL MAINTAIN 36" MIN. DEPTH WHILE DIRECTIONAL DRILLING NOTE: BORE PITS, TRENCH HATCHING AND POTHOLES ARE NOT SHOWN TO SCALE FOR VISUAL PURPOSES. PLEASE SEE BORE PIT DETAIL FOR TYP, BORE PITS, & TRENCH DIMENSIONS PROPOSED CONDUIT BORE PIT POTHOLE 3 OF 6GENERAL NOTES SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE: Know what's below. before you digCall RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 5 TCP 1 4 OF 6PROJECT OVERVIEW - ROUTE SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE: N RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 EOP EOP EOP EOP EOP EO P EOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPROWROWROWROWROWROWROW ROW ROW ROW ROW ROW ROWROWROWROW ROW V V CA B V P V N 8TH ST PARCEL 815 PARCEL HOUSER WAY N 1 2 4'1 2 5'1 2 5 OF 6PROJECT OVERVIEW - ROUTE SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE: N RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 EOP EOP EOP EOP EOP EO P EOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPEOPROWROWROWROWROWROWROW ROW ROW ROW ROW ROW ROWROWROWROW ROW V V CA B V P V N 8TH ST PARCEL 815 PARCEL HOUSER WAY N 1 6' 5' 3'127²FT 6 OF 6PROJECT OVERVIEW - ROUTE SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE: N RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456 SPOTTERSIDEWALK SIDEWALK SIDEWALK SIDEWALK POLICE POLICE ROAD AHEAD WORK LEFT LANE AHEADCLOSED N 8TH ST HOUSER WAY NTMA29' 25' TRAFFIC CONTROL PLAN SHORT DURATION WORK ZONE PROTECTIVE VEHICLE WITH TMA ROLL AHEAD DISTANCE ROLL AHEAD STOPPING DISTANCE ASSUMES DRY PAVEMENT. BUFFER DATA LONGITUDINAL BUFFER SPACE = B 200 30SPEED (MPH) LENGTH (FEET) 25 155 305 35 40 250 425360 45 50 570495 55 60 730 70 645 65 WITH TMA TYPICAL PROTECTIVEVEHICLE TYPE (LBS) TYPICAL PROTECTIVE VEHICLE(WITH TMA) LOADED WEIGHT (FEET) STATIONARYOPERATION FLAT BED, ECT. 4 YARD DUMP TRUCK,SERVICE TRUCK,IN ACCORDANCE WITH MINIMUM WEIGHT 15,OOO LBS.(MAXIMUM WEIGHT SHALL BE MANUFACTURER RECOMMENDATION) 30 MIN. A PROTECTIVE VEHICLE IS RECOMMENDED REGARDLESS IFA TMA IS AVAILABLE. IF NO TMA IS USED, THE PROTECTIVEVEHICLE SHALL BE STRATEGICALLY LOCATED IN THE FIELD TOSHIELD WORKERS AND NO ROLL AHEAD DISTANCE IS SPECIFIED. * CLASS OF ROAD WARNING SIGN SPACING TAPER LENGTH (L)WARNING SIGN IN FEET IN FEET CHANNELIZING DEVICE SPACING IN FEET (maximum) I II III * 150 300 150 300 75 150 75 150 400 90 200 500 Speed Limit Speed Limit Speed Limit Speed Limit X 2 Speed Limit X 2 Speed Limit X 2 15 20 30 30 50 80 30X30 30X30 48X48 X X X 10'12' Lane Width Taper (S) Tangent Taper (S) Tangent MIN. SIZE IN INCHES ROAD CLASSIFICATIONSCLASS I - Central Business District, University DistrictCLASS II - Arterial StreetsCLASS III - All partially or full controlled access arterial streets *Advanced warning signs if feasible**Vertical barricades, cones, tubular guideposts TCP 1TRAFFIC CONTROL PLAN SHEET NUMBER: CLIENT: PREPARED BY: PROJECT NUMBER: COMMUNICATIONS PERMIT JURISDICTION: SHEET TITLE: N NOT TO SCALE RENTON JN2253010337 P.O. BOX 1965 SUMNER, WA 98390 (253) 863-3881 www.UtiliGi.com EXTENET REV DESCRIPTION BYDATE DESIGN SS02/16/2023 PERMIT #: 123456 ASSOCIATED PERMIT #: 123456