HomeMy WebLinkAboutP_Truss_Layout_180720_v32X6
RAFTER
6/12GARAGE
HUS26(9)
HUS26(14)
Furnace
Platform
8/128/12 6/12Qty
26
Product
Blocking List
2x4 Vent Block
= Truss left end indicator.
QUANTITYHANGERCARRIED
MEMBER
HANGER SCHEDULE
CARRYING
MEMBER
USE 10DX1 1/2" NAILS @ SINGLE PLY CARRYING MEMBER
OR CLINCH 3" NAILS ON BACKSIDE OF GIRDER
HUS26 2314-16D6-16D 6/12J01J02(3)
J03(6)3-00-00D01
D02
C01
C02
B01
B03
A01A05B02(3)A02(5)A03(4)A04(5)6-06-0046-06-0053-00-004-00-0049-00-0053-00-0010-09-0013-01-006-02-00
30-00-00
30-00-00
5-06-004-11-006-00-006-06-002-00-004-03-00
11-05-007-00-0039-06-00THIS IS A TRUSS PLACEMENT DIAGRAM ONLY.
These trusses are designed as individual building
components to be incorporated into the building design
at the specification of the building designer. See the
individual design sheets for each truss design identified
on the placement drawing. The building designer is
responsible for temporary and permanent bracing of the
roof and floor system and for the overall structure. The
design of the truss support structure including headers,
beams, walls, and columns is the responsibility of the
building designer. For general guidance regarding
bracing, consult "Bracing of wood trusses" available
from the Truss Plate Institute, 583 D'Onifrio Drive;
Madison, WI 53179
BUILDER :
PROJECT :
DATE :
DRAWN BY :
SCALE:
20815 67th Ave NE
Arlington, WA 98223
Phone: 1-360-925-4155
JOB #:RT - 1
ADDRESS :
JK Monarch
Chelan Creek Lot 2
, Renton, WA
GTG
07/18/18 10:52:12
B1800692
D08-053
B18000839
V3
REVISION
Received: 07/20/2018 / aalexander
BUILDING DIVISION
APPROVEDBUILDING DIVISION
THIS SET OF APPROVED PLANS MUST BE ON THE JOB AT ALLTIMES DURING CONSTRUCTION. THIS BUILDING IS NOT TO BEOCCUPIED UNTIL AFTER FINAL INSPECTION BY THE RENTONBUILDING DIVISION AND RECEIPT OF CERTIFICATE OFOCCUPANCY.
APPROVAL SHALL NOT BE CONSTRUED AS THE AUTHORITY TOVIOLATE OR CANCEL ANY PROVISIONS OF CODES, ORDINANCES,OR OTHER REGULATIONS ENFORCED BY THIS CITY.
DATE: 08/07/2018