HomeMy WebLinkAboutP_Truss_Layout_190628_V3TO CENTER OF BEAM5:128:128:12FURNACEPLATFORMCAUTION: DO NOT CUT, DRILL ORALTER ANY TRUSSES WITHOUTPRIOR APPROVAL FROM ROOFTRUSS SUPPLY, INC.QTY TYPE SYMBOL38 LUS2415 HUS26NOTE: ALL HANGER NAILS MUST BE 16dSINKER (3-1/4" LONG)....TYP. UNLESSNOTED OTHERWISE12ROOF NOTES:1.) ALL TRUSSES TO BE SPACED AT 24" O.C.(UNLESS NOTED OTHERWISE)2.) PROVIDE FULL BEARING UNDER GIRDERTRUSSES.3.) SEE ATTACHED FRAMING DETAILS FORHIP, VALLEY, GABLE, AND OVERFRAMING.4.) ALL BEAMS ARE DESIGNED BY OTHERS,UNLESS NOTED OTHERWISE - (SEESTRUCTURAL FRAMING PLANS.)ROOF PITCH: 8/12 (U.N.O.)OVERHANGS: 18"HEEL HEIGHTS: STD.LOADING: 25 TC LL10 TC DL10 BC DL-----------------45 TL PSF2015 IRC CODEWIND EXPOSURE: BWIND VELOCITY = 110 mphKzT = 1.008:128:128:128:128:128:128:128:128:128:128:128:128:128:128:121112211= AREA FIELDFRAMED BY OTHERSG3G1H1H2G2(9)9-00-00C1C2D6D5D1D2A3A1A2B1B2B3D3F3F1E1E3C4E4F2(9)E2(2)C3(3)D4A(5) D4(3)22-00-002-00-0015-02-00 10-00-00 18-10-0014-06-0035-06-006-11-005-03-0020-00-006-08-0015-00-0021-08-0020-00-005-00-088-08-0024-00-006-00-006-00-006-00-0018-02-0020-02-00RENTONCC 11JK MonarchJob #: B-19-00095-AAbove plan provided for truss placementonly. Refer to truss calculations andengineering structural drawings for allfuther information. Building designer/engineer of record are responsible forall non truss to truss connections.Building designer/engineer of recordto review and approve all designs priorto construction.Customer:Project:Plan:Delivery:Issue Date:1/22/201912:00:00 AMRevision-201/23/19Revision-3/ /Anna RoatsDrawn By:D08-053B19001045V3REVISION Received: 06/28/2019 / aalexanderBUILDING DIVISIONAPPROVEDBUILDING DIVISIONTHIS SET OF APPROVED PLANS MUST BE ON THE JOB AT ALLTIMES DURING CONSTRUCTION. THIS BUILDING IS NOT TO BEOCCUPIED UNTIL AFTER FINAL INSPECTION BY THE RENTONBUILDING DIVISION AND RECEIPT OF CERTIFICATE OFOCCUPANCY.APPROVAL SHALL NOT BE CONSTRUED AS THE AUTHORITY TOVIOLATE OR CANCEL ANY PROVISIONS OF CODES, ORDINANCES,OR OTHER REGULATIONS ENFORCED BY THIS CITY.DATE: 07/10/2019