HomeMy WebLinkAboutA_RDA Project - Renton Permit Review Revisions Version 1 Narrative_180402_V2Berne Thorpe, PE
Cell: 253 508-9682 - Tel: 253 833-3286
April 2, 2018
Ryan Puddy
City of Renton
Development Services
1055 S Grady Way, 6th Floor
Renton, WA 98057
RE: City of Renton Review Comment Narrative Response
PR17000254, E18001390
Renton Dental Arts Project
17816 108th Ave SE
Renton, WA 98055
Mr. Ryan Puddy,
Following is our narrative of the revisions for each of your Version 1 review
comments on Sh eet E501 of this project.
1. ‘Minimum #1 Cu EGC required for 600 A parallel run ’ – EGC size revised to #1
for 600A feeder per Table 250-122.
2. ‘No EGC from PSE Transformer to 800A bussed tap box ’ – Deleted EGC from
service feeder callout.
3. ‘Provide available fault current at service point ’ – Added calculated available
fault currents at each panel, bussed tap box and “TO PSE TRANSFORMER”
callout.
All revisions on E501 have been clouded and indicated as Rev 1 . Please feel free to
contact me if there are any further questions
Thank you.
Sincerely,
Berne Thorpe, PE
Signature Date 04-02-2018