HomeMy WebLinkAboutMFP24002604.pdfDEPARTMENT OF COMMUNITY
AND ECONOMIC DEVELOPMENT
Minor Franchise Permit: MFP24002604
IVR Number: 24002604
Permit Information
Permit Name: Puget Sound Energy - Electric
Address/Location:05/20/2024Application Date:3340402670Parcel Number: 101 SW GRADY WAY
Permit Type:06/03/2024Issue Date:Franchise
Permit Work Class:06/03/2025Expiration Date:Minor Utility
Job Number: 105104442Franchise Type:Electric
Description: Puget Sound Energy Electric CUSTOMER TO TRENCH APROX 35FT IN RIGHT OF WAY AND INSTALL 1
4'CONDUIT. PSE TO PULL CONDUIT THROUGH NEWLY INSTALLED CONDUIT. PSE TO PARK TRUCKA AT J01
AND AT V01 TO ON ROAD TO INSTALL AND USE EQUIPMENT. RESTORATION PER CITY OF RENTON
STANDARDS.
Contacts
Name Address PhoneTypeBilling
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031ApplicantX
Vicki Henson
Potelco Inc
8001 212th St S
Kent, WA 98032
B: (253) 863-0484Contractor
Business License Number: 5109Electrical Contractor: POTELI*344O4
Construction Contractor: POTELI*227PL
Puget Sound Energy Inc 10885 NE 4th Street, PSE08-N08
Bellevue, WA 98009
B: (888) 225-5773Emergency
Contact
CITY OF RENTON ROW 1055 S Grady Way
Renton, WA 98057-3232
Owner
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031Specialized
Billing
General Conditions & Signature
Permission is hereby given for the work described on this permit according to the conditions hereon and according to the
approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton.
Ÿ
This permit and plans must be posted at the job site at all times.Ÿ
I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to
Renton Trench Restoration and Street Overlay Requirements.
Ÿ
Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY
work in the Right of Way.
Ÿ
Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ
In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010)
(Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission
pipeline company prior to performing any construction or excavation activities. This requirement to consult with the
transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122.
Ÿ
(Date)(Signature)
Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
DEPARTMENT OF PUBLIC WORKS
Page 1 of 3 | Published: 10/27/2021
Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380
Website: rentonwa.gov
TRAFFIC CONTROL PLAN APPLICATION
Published: 10/27/2021
TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION
FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK.
The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control
plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted
within the city's right-of-way.
1. Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents.
2. The following items are all required for submittal of the TCP Application:
☐Electronic Copy of the TCP Application
☐Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall:
Include map(s) showing the location of the project and work area.
Be legible lettering and clear, contrasting, symbols of viewing or printing.
Must indicate street names, and north arrow and scale.
Types of plans required:
o Work hour plan – show all mobility impacts during construction hours.
o Non-work plan - show all mobility impacts after work hours when limited or no work is
happening in the right-of-way (ROW), if applicable.
o Changing construction phases – show construction sequence and each construction phase
change even if the traffic control is not modified, if applicable.
o Pedestrian access/detour plan, if applicable.
- Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the
Evergreen Safety Council.
3. Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].”
Project Name: Permit #:
Site Address:
Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________
Construction Company:
Contact Name: Phone/Cell: _________________________
Business Address: City/State: Zip:
Description of Work:
Approval By: _________________________________________________ Date:____________________
Transportation Engineering
PLEASE SEE ATTACHED
POTELCO, INC
6905 S 228TH ST KENT, WA 98032
105104442
101 SW Grady Way
JENNY CHAU 2532627409
MFP24002604
Monday - Friday 8:00AM - 3:00PM
Scott Warlick CED 6/3/2024
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 2 of 3 | Published: 10/27/2021
PERMIT HOLDER AGREES TO ALL THE FOLLOWING:
Must have approved Traffic Control Plan (TCP) prior to commencing the work.
Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time,
with the least possible inconvenience or delay to pedestrians.
WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the
traveled way.
Comply with all traffic regulations of the City of Renton and the State of Washington.
Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street
and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control
Devices.
Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures.
Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public
transit, to be affected by a temporary lane or road closure a minimum of five business days (excluding weekends
and holidays) prior to starting any work.
Contractor or entity must notify King County Metro in writing at construction.coord@kingcounty.gov a minimum
of five business days (excluding weekends and holidays) prior to starting any work impacting bus stops, a
temporary lane or road closure. Work requiring removing a bus shelter or sign requires notification in writing a
minimum of 30 business days (excluding weekends and holidays). Please call King County Metro at 206-477-1140
with any questions.
Any lane or street closures not in conformance with the approved traffic control plan and/or without notification
of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at
thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes.
Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all
costs of defense and attorney’s fees incurred in defending against same, arising from and related to
implementation of the approved traffic control plans including claims arising from towing of private vehicles and
the acts of the Permit Holder’s agents and employees.
The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in
such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable
attorney’s fees and litigation costs incurred resulting from such claim.
In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for
legal counsel chosen by the City to defend against same.
Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or
pedestrian safety or travel.
All permit conditions shall be met.
NOTES:
Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council.
Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD)
and shown by a traffic control plan layout or reference to WSDOT.
Approved Temporary Traffic Control Plan must be at the work site during work hours.
Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or
walkway is impeded to safely redirect pedestrians around a work zone.
Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery
road conditions during work and non-work hours.
Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company
logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous
place on the vehicle or equipment.
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 3 of 3 | Published: 10/27/2021
In the case of Temporary No Parking Zones, all the following apply in addition to previous:
Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for
vacate parking or curb lane usage.
Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block
seventy-two (72) hours in advance of effective date and time.
The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the
project site.
Temporary traffic control devices must be removed immediately when work is done or no construction activities
are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555
NE 2nd Street).
I certify that the information on this application and within the submittal documents are accurate to the best of my
knowledge and I acknowledge all the requirements on this application.
Applicant’s Signature Date
Applicant’s Name (Print)
CORRIE RYDBERG
DRIV
E
W
A
YDRIVEWAYDRIVEWAYP01V01 ROADWORKAHEAD
ONE LANEROADAHEADROADWORKAHEAD SW 12TH ST100'+/-100'+/-100'+/-SW 12TH STNOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
NO PARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
PLEASE SCHEDULEWITH DISPATCH@ 800-343-4049 OPT.1AND PROVIDE ACOPY OF THE APPROVEDTRAFFIC CONTROL PLANK&D Services, as the preparer of this trafficcontrol plan makes no representation as to its'general adequacy or being approved for implementation.Approval must result from the Traffic Engineer orother Public Official having statutory enforcement authorityin the jurisdiction. Utilization and implementation of thisplan shall be a result of that approval.Ref. MUTCD 2009 6A-01 (10)LegendConeFlaggerPoleNOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 R7-T39 R7-T39ROADWORKAHEADW20-1 Road Work AheadONE LANEROADAHEAD W20-4 One Lane Road AheadW20-7a flaggerWork Area
Notes:1. Maintain ped. access to
and through crosswalks2. Maintain Min. 10' lanes
3. Maintain local access
4. Notify Transit Authority
at least 48 hrs. in advanceof bus stop closure5. Traffic control plan and all
devices shall comply withMUTCD, PROWAG & WSDOT6. DEVICE SPACING
Flag Taper 20'Signs per WSDOTTapers per WSDOT7. 28" Cones
36" Barrels48" Signs24" Paddle8. Adjust to field conditions OFFICE: 800-343-4049DIRECT: 425-923-9086WATCP@KNDSERVICES.NET
CUSTOMER:CONTACT:LOCATION:DATE:W/O #JENNY CHAU253-234-640304/30/24 513781821...101 SW GRADY WAYRENTON, WA 98052 WSTCS#012693EXP:1/31/25DESIGNED BY: WHITNEY PATERNO
PLACE SPOTTER AT ANY OPEN DRIVEWAY ORENTRANCE LOCATED WITHIN THE WORK ZONE TOASSIST TRAFFIC OUT OF WORK ZONE.MAINTAIN DRIVEWAY ACCESS, IF UNABLE TO NOTIFYHOMEOWNERS OF TEMPORARY CLOSURE.PLACE NO PARKS 72 HOURS IN ADVANCE OF WORKBEING PERFORMED. ON BOTH SIDES OF THESTREET
www.invarion.comMFP24002604
1-4" SCH'L 80 CONDUIT
317433-165738 T0/14
37.5 kVA 120/240V (B)
SW#T91412 (100T)
317441-165737
1-4" SCH'L 80 CONDUIT
1-4" SCH'L 80 CONDUIT
317424-165742
500 kVA 277/480V (ABC)
1-4" SCH'L 80 CONDUIT
EXISTING
EXISTING
NEW
EXISTING
317449-165745
1500 kVA 277/480V (ABC)
101
215
SW 12TH S
T
SW 12TH S
T
317449-165745
1500 kVA 277/480V (ABC)
R/W
30'
GRA
26
317444-165761 T0/13
50 kVA 120/240V (B)
SLAG7001
317450-165764 T145/1
112.5 kVA 120/208V (ABC)
336.4MCMA
C
S
R
ABC#2ACSRCBA
209
317433-165738 T0/14
37.5 kVA 120/240V (B)
SW#T91412 (100T)
317441-165737
317443-165738 T144/19X
317424-165742
500 kVA 277/480V (ABC)
317433-165738 T0/14
37.5 kVA 120/240V (B)
SW#T91412 (100T)
317441-165737
317424-165742
500 kVA 277/480V (ABC)
3Ø PRI 12KV 1/0 UG
NEW
EXISTING
3Ø PRI 12KV 1/0 UG
A: EJN448
B: EJN449
C: EJN450
EXISTING
3Ø PRI 12KV 1/0 UG
RETAG TO:
A: EJN532
B: EJN533
C: EJN534
A: EJN529
B: EJN530
C: EJN531
317449-165745
1500 kVA 277/480V (ABC)105104442 SITE SPECIFIC NOTES
P01 EXISTING 317433-165738:
-EXISTING 1962 75FT CL-1 POLE TO REMAIN
-OPEN CUTOUT AND DE-ENERGIZE CABLES AØEJN448, BØEJN449, CØEJN450
-RE-ENERGIZE AFTER CONSTRUCTION IS COMPLETE
J01 EXISTING 317441-165737:3-21, (6)2-57
-EXISTING VAULT TO REMAIN
-CONVERT EXISTING VAULT TO JBOX 6055.1030(JBOX15L) W/O VAULT
-INSTALL (9) L/B ELBOW KITS 6041.1000(ELB10J)
-INSTALL (3) DUST CAPS (MID: 7630600)
-CUT CABLES AØEJN448, BØEJN449, CØEJN450 AND CONNECT BOTH ENDS TO JBOX
-INSTALL NEW CABLE TAGS AØEJN529, BØEJN530, CØEJN531 TOWARDS V01
-INSTALL NEW CABLE TAGS AØEJN532, BØEJN533, CØEJN534 TOWARDS V02
EM1:1-08A
-LOCATE EXISTING ELECTRONIC MARKER
-CUSTOMER TO CONNECT TO EXISTING 4" CONDUIT
V01 NEW 317449-165764:3-19B
-INSTALL 7' X 7' 4' VAULT W/ 8' X 10' COVER 6045.5000(PM3P15L)
-SET 1500KVA, 277/480V PM XFMR (MID:6259400)
-INSTALL (4) #10 - 500KCMIL SECONDARY CONNECTOR BARS (MID:7651002)
-INSTALL (16) CONNECTOR LUGS BOLT KITS (MID:7651008)
-INSTALL (3) L/B ELBOWS 6041.1000, ELB10J
-INSTALL GRID #
-CONNECT CUSTOMERS, OWNED, INSTALLED, AND MAINTAINED 6-RUNS OF 400KCMIL
V02 EXISTING 317424-165742:
-EXISTING VAULT TO REMAIN
-EXISTING 500KVA 277480V PM XFMR TO REMAIN
-TRANSFER CABLE TAGS AØEJN448, BØEJN449, CØEJN450 TO J01
-INSTALL NEW CABLE TAGS AØEJN532, BØEJN533, EJN534
M01 NEW:
-PSE METER DEPT. INSTALL METER ON 2000A PANEL
SPAN NOTES
-SEE SITE PLAN, TABLES, AND ONELINES FOR INSTALL
SCALE: NONE
CONDUIT ONE-LINE
CUSTOMER NOTES
Customer is responsible for all trenching, select backfill, compaction & restoration per Puget Sound Energy
Standards & Local Municipality (See PSE Electric Service Handbook for more details).
1.Contact the Utilities Underground Location Center (1-800-424-5555) at least 48 hours prior to
commencing work to get the underground facilities located.
2.STAKING: The customer will provide all staking (transformer, handhole, trench, grade, lot, pole,
sidewalk, etc.). See sketch and details for locations. Equipment locations must be approved by the
Project Manager.
3.SITE PREPARATION: The work area will be at or near finished grade, clear of trench spoils or
construction materials which would restrict construction and/or equipment access, before work can begin.
4.Roads shall be paved or have a compacted , crushed rock base in place.
5.CLEARANCES: Transformers require a minimum of 6 feet from fire fighting equipment, 10 feet from
combustible walls, overhangs, doors, and windows, and a minimum of 5 feet from the back of curb (or
guard posts will be required per PSE standards). All conduits and vaults are to be at least 5 feet away
from water, storm and sewer lines when paralleling them in the right of way, and at least 1 foot when
crossing them.
6. All work is to be done in accordance with local municipal and county permit requirements as applicable.
7.Inclement weather conditions may cause delays in construction times and dates.
8.EXCAVATION: The customer is to provide all trenching, backfill, vault excavations, compaction and
restoration per this sketch and per PSE standards. A minimum protective cover of 36" is required over
PSE's primary voltage equipment and 24" is required of PSE's secondary voltage equipment. The
customer will provide any and all shoring or they will side slope the trench to 1:1.
9.EROSION & SEDIMENT CONTROL: Erosion & sediment control shall be per PSE standard practice
0150.3200 techniques for temporary erosion & sediment control & any additional local jurisdiction
requirements. (Local jurisdiction may have additional requirements including notes detailing where
erosion or sediment control structures are to be installed, cross section details of the typical erosion
structures, & special requirements for work in sensitive areas.)
10.Customer is required to have meter inspected and approved by L&I/City prior to construction.
Installed at site:
Grid Number:
kVA Rating:
TRANSFORMER INSTALLATION (PM)
Company ID#:
Primary phase connected to:
Tested Secondary Voltage
Material ID#:
Foreman to redline the following information
1500kVA 277/480v
6259400
V01
317449-165764
POWER GENERAL NOTES - COMMERCIAL PROJECT
All materials to be installed in accordance with Puget Sound Energy's (PSE) standards. Any deviation from
this work sketch must be AUTHORIZED by PSE's Project Manager and NOTED on the Foremans' Copy.
All switching arrangements and/or outage arrangements are to be made with the Project Manager at least
three (3) working days in advance.
1.
2.
N
Vicinity Map
47.469457, -122.220439
FOREMAN (CHECK BOX WHEN COMPLETED)
PSE Equipment LOCKED/SECURED & Work Area left in CLEAN/SAFE Condition.
Grid, Cable, and Switch numbers INSTALLED & VERIFIED.
Field Changes RED-LINED on As-built.
Indicate correct FUSE SIZE on As-built & VERIFY proper PHASE.
Foreman's Signature _______________________________________________
Print Name ___________________________________ Date ______________
Material VERIFIED and CHANGES noted on Paperwork.
Total PRIMARY Cable noted on As-built.
Company ID#'s RECORDED in correct location on As-built.
Deviations noted on the As-built and their reason.
I certify that the work performed meets PSE's standards and procedures
and that all quality requirements are met.
JOB SITE
PSE
No
No
No
Yes
Yes
Yes
No
YesDeveloper
"Flagging Required"
"Outages Required"
"Locates Required"THIS SKETCH NOT TO BE RELIED UPON FOR EXACT LOCATION OF EXISTING FACILITIES
CALL 811 TWO BUSINESS DAYS BEFORE YOU DIG
For contacts below dial 1-888-CALL PSE (225-5773)
UTILITIES
CONTACT
PHONE#
COUNTY
1/4 SEC
U-MAP NO (POWER)
OP MAP
Emer Sect Gas Wk Ctr POWER WK CTR
PLAT MAP
JOINT FACILITIES ARRANGEMENTS
DRAWN BY
CHECKED BY
APPROVED BY
FOREMAN #1
FOREMAN #2
MAPPING
INCIDENT MAOP
Gas Order Elect Order
SCALE PAGE
ENGR - POWER
ENGR - GAS
FUNCTION
PROJECT MGR
PERMITREAL ESTATE/EASEMENT
2
1
REV#
3
DATE DESCRIPTIONBY
CONTACT PHONE NO DATE
OH CKT MAP CIRCUIT NOUG CKT MAP
J. CHAU 253-208-9480 10/1/23
R. REYNOLDS 253-262-7409 10/1/23
R.REYNOLDS 253-262-7409 10/1/23
RW-______RENTON
SOUND FORD EV CHARGERS
3-PHASE PRIMARY L/E, SERVICE CONNECT
101 SW GRADY WAY, RENTON, WA 98052
N/A N/A
N/A 105104442
AS NOTED 1 OF 2
KING N/A N/A CSPSKEPM
NW 19-23N-05E N/A N/A
2305E074 2305E076 2305E074SE GRA-26
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
E-Mail:
Cell Phone:
Project Manager Contact Information:
Manager:JENNY CHAU
253-208-9480
JENNY.CHAU@PSE.COM
GAS
PHONE
CABLE TV
PROJECT PHASE
PWR
NOTIF#ORDER#
Owner / Developer Contact Info
officeATTN:
SOUND FORD
101 SW GRADY WAY
RENTON WA 98052
KEITH JOHNSON 253-398-3215
513781821
.
.
.
105104442
Dist UG Maint
Dist OH Maint
Superior
SITE PLAN
SCALE: 1" = 50'
& ANY ADDITIONAL LOCAL JURISDICITON REQUIREMENTS.
EROSION & SEDIMENT CONTROL SHALL BE PER PSE STANDARD PRACTICE
0150.3200 TECHNIQUES FOR TEMPORARY EROSION & SEDIMENT CONTROL
(LOCAL JURISDICTIONS MAY HAVE ADDITIONAL REQUIREMENTS INCLUDING
NOTES DETAILING WHERE EROSION OR SEDIMENT CONTROL STRUCTURES
EROSION & SEDIMENT CONTROL REQUIREMENTS
STRUCTURES, & SPECIAL REQUIREMENTS FOR WORK IN SENSITIVE AREAS.)
ARE TO BE INSTALLED, CROSS SECTION DETAILS OF THE TYPICAL EROSION
CUSTOMER DEVELOPMENT NOTES:
A PRE CONSTRUCTION MEETING IS REQUIRED WITH YOUR PROJECT MANAGER PRIOR
TO STARTING ANY SITE WORK.
CUSTOMER IS RESPONSIBLE FOR ALL TRENCHING, SELECT BACKFILL, COMPACTION &
RESTORATION PER PUGET SOUND ENERGY STANDARDS & LOCAL MUNICIPALITY.
**DEVELOPER NEEDS TO FOLLOW ALL TRENCH DETAILS ON SELECT BACKFILL**
CUSTOMER IS RESPONSIBLE FOR THE FOLLOWING:
CROSSING/BORING.
-OPEN TRENCH OR BORING FOR CROSSINGS ARE ALLOWED PER LOCAL
MUNICIPALITY PERMIT REQUIREMENTS.
-CROSSINGS IN RIGHT OF WAY MUST BE SCHEDULED WITH PROJECT
MANAGER PRIOR TO CONSTRUCTION.
-PROJECT MANAGER OR DESIGNATED REPRESENTATIVE MUST BE ON SITE
DURING CONSTRUCTION WORK IN RIGHT OF WAY.
-EXCAVATION CONTRACTOR MUST BE LICENSED AND BONDED TO PERFORM
WORK IN RIGHT OF WAY.
VAULTS & WORK PITS.
-PROVIDE A 11' X 11' WORK PIT & 6" BEDDING OF 5/8" CRUSHED ROCK AT V01.
TRENCHING & CONDUIT.
-INSTALL ±70' OF 1-4" SCH'L 80 GREY PVC CONDUIT FROM EM1 TO V01.
-REQUIRED TO PROVIDE AND INSTALL A 3/8" NON-POLY PULL ROPE IN ALL OF
THE CONDUITS.
JOB SITE READINESS.
-JOB SITE NEEDS TO BE 100% READY FOR INSPECTION 5 BUSINESS DAYS
PRIOR TO CONSTRUCTION DATE.
-ALL WORK IN RIGHT OF WAY MUST BE COORDINATED WITH PROJECT
MANAGER AND LOCAL MUNICIPALITY.
-ALL TRENCH, AND LOCAL ELECTRICAL MUNICIPALITIES AKA "L&I, CITY",
INSPECTIONS MUST BE COMPLETED 5 BUSINESS DAYS PRIOR TO SCHEDULED
CONSTRUCTION DATE.
-REQUIRED TO OPERATE AND PROVIDE EQUIPMENT TO PUMP OUT WATER FOR
WORK PITS, VAULTS & TRENCH AT ALL TIMES.
-REQUIRED TO HAVE EXCAVATION EQUIPMENT AND BE ON SITE THE DAY OF
CONSTRUCTION TO COMPLETE BACKFILLING.
- IF A SECOND INSPECTION IS REQUIRED, ADDITIONAL FEE'S WILL BE APPLIED.
-PLEASE REVIEW THE CITY OR KING COUNTY TRENCHING REQUIREMENTS UNDER THE
PERMIT.
-IF A PRE-CON IS REQUIRED BY THE CITY, COUNTY OR W.S. DOT A PSE PROJECT
MANAGER WILL SET-UP AND SCHEDULE A MEETING WITH THE MUNICIPALITY
BEFORE ANY EXCAVATION OR INSTALLATION BEGINS .
CUSTOMER OWNED AND INSTALLED SECONDARY WIRE TABLE
METER # OF
METERS SOURCE # OF RUNS WIRE SIZE REMARKS
M01 1 V01 6 400KCMIL -
ALL CUSTOMER-OWNED WIRE MUST BE INSTALLED ACCORDING TO THIS TABLE
CIRCUIT LOADING TABLE
AS OF
EXIST. PEAK LOAD
EST. NEW LOAD
TOTAL
CIRCUIT:
A PHASE B PHASE C PHASE
GRA-26
10/2022
87.00 91.00 86
60 60 60
147 151 146
CIRCUIT FEET ADDED: 60'
LRC:
% V. Drop:
% Flicker:
Sq. Footage:
Panel Size:
Heat Type:
Est. Demand:
N/A
2000A
ELECTRIC
1100KW
65A
3.1%
0.2%
Vault & Equipment Table
Work
Location
Grid
Number
Vault Size
& Cover
Type & Size
Equipment
In Vault
Primary Bushings Transformer
ID Numbers
(Company ID)
ASBUILT INFORMATION
Foreman-CompleteLBDC
V01 317449-165745 PM3P15L (7'x7'x4')PAD-3P-12-277/480
-1500 (1500 kVA)3
J01 317441-165737 EXISTING JBOX MID:7625900 9 3
00 1"2"
00 50'100'
FAULT CURRENT TABLE
3Ø PM TRANSFORMERS (480Y/277V)
277V WINDINGS 480V WINDINGS
LOCATION SIZE R/X MIN.
%Z
FAULT
CURRENT
MIN.
%Z
FAULT
CURRENT
V01 1500KVA 0.1 --5.30 34,000 AMPS
OVERHEAD CIRCUIT MAP 2305E076
SCALE: 6" = 1 MILE
JOB SITE
UNDERGROUND MAP 2305E074SE
SCALE: NTS
JOB SITE
Primary Cable & Conduit Table (Foreman to Complete)
LOCATION CONDUIT PRIMARY CABLE
QTY OF LUBE (gal.)AS BUILT
INFORMATION
From To Size
(in)
Qty
Design
Length
(ft)
Actual
Length
(ft)
TYPE BENDS PULL
(lbs)
PULL
Rev
(lbs)
Cable
Size
Design
Length
(ft)
Actual
Length
(ft)
CABLE NUMBERS MANUFACTURING INFORMATION
DB120 HDPE SCH 80 90°45°22°11°A B C Manufacturer Compound Year Design As Built
Actual Amount
Installed
(Conduit & Cable)
EM1 V01 4"1 70'X 1 CONDUIT ONLY
J01 V01 CABLE ONLY 226.6 235.7
PRI
12KV
1/0 UG
180'EJN529 EJN530 EJN531
J01 V02 EXISTING CONDUIT EXISTING CABLS EJN532 EJN533 EJN534
SCALE: NONE
CABLE ONE-LINE
NOTE: PRIMARY CONDUIT IS PSE PROVIDED & CUSTOMER
INSTALLED, UNLESS OTHERWISE SPECIFIED.
NOTE: PRIMARY CABLE IS PSE PROVIDED & INSTALLED
MFP24002604
RESTORATION PER CITY OF RENTON STANDARDS
105104442 COOLING
5' MIN
5' MIN
10' MIN
5'
MIN
FINS
ACCESS
CONCRETE PAD
MINIMUM CLEARANCES FOR PSE EQUIPMENT
NOT TO SCALE
CURB OR EDGE OF PAVEMENT
CURB OR EDGE OF PAVEMENT
5' MIN
ROAD OR
PARKING AREA
TYP. PAD
& TRANS-
FORMER
3'
MIN
3' MIN
DOOR
ACCESS
DOOR
REQUIRED
WORK SPACE
AREA
3' MIN
THIS SKETCH NOT TO BE RELIED UPON FOR EXACT LOCATION OF EXISTING FACILITIES
CALL 811 TWO BUSINESS DAYS BEFORE YOU DIG
For contacts below dial 1-888-CALL PSE (225-5773)
2"
Excavation - 20 cubic yards
10'-0"
7'-0"
8'-0"
8"
4'-2"
SIDE VIEW
4'-6"Crushed
6"
Rock
11'
11'
TOP VIEW
3'-6"
7'-0"
6045.5000Not to scale
VAULT & EXCAVATION DETAIL
Customer Owned Services
Prop 4" (P01)
PM XFMR VAULT B-FLY DETAIL (V01)
SCALE: NONE
FRONT OF TRANSFORMER
GUARD POST INSTALLATION
GUARD POST LOCATIONS
10' MIN. REQUIRED
ROAD OR PARKING AREA
GUARD
POSTS
5'
MIN
MIN
WORK SPACE
5'
MAX
5'
MAX
6"
CONCRETE
5'
MAX
5'
MIN
5'
MIN
PAINTED
YELLOW
MIN
2'-6"
6"
3'-6"
6'-0"
CURB OR EDGE
OF PAVEMENT
CURB OR EDGE
OF PAVEMENT
The following styles of guard posts are approved for Puget Sound Energy transformers:
- 6 ft x 4 in. diameter Schedule 40 or better galvanized steel pipe filled with concrete.
The concrete shall have a minimum compressive strength of 3000 psi after 28 days.
The exposed portion of the post shall be painted traffic yellow.
- 6 ft x 9 in. diameter precast steel-reinforced concrete post.
Available from Utility Vault Company, Auburn, WA; or Hanson Inc., Tacoma, WA.
The exposed portion of the post shall be painted traffic yellow.
PAD &
FRONT
GUARD
XFMR
3' MIN
TYPICAL
MIN
18"18"
MIN
MIN
3'
LENGTH
GUARD POST INSTALLATION
Not to scale 0700.1600-02
Communications
Primary Power
Cables or Conduit
Excavated Dirt Pile
ROADSIDE
Final Grade
24" Min
12" Min
Separation
36"
Min
Cover
48"
Max
Backfill
(No rocks over 10" diameter)
Separation
12" Min
Gas
4" Sand Bedding
32" Typical
(Power, Gas, and
Communications)
JOINT TRENCH DETAIL
Primary-Mainline Gas & Communications (NTS)
Separation
12" Min
6" or 12" Min Sand Shading after Compaction
- A 6" layer of sand is allowed when excavated native material contains rocks no larger than 8" in diameter.
Trench and backfill requirements for primary electric line extension trenches (No PSE gas)
- A 12" layer of sand is required when excavated native material contains rocks up to 10" in diameter.
PRIMARY TRENCH DETAIL
FLOW DIRECTION
LAY 8" BOTTOM SKIRT ON TOP OF NATIVE SOIL,
SECURE WITH PEA GRAVEL BAGS.
6'
3'
8"
TECHNIQUES FOR EROSION AND SEDIMENT CONTROL
SILT FENCE DETAIL
Not to Scale 0150.3200
CONDUIT RISER PLACEMENT DETAIL (P??)
SCALE: NONE
Field Face
Quadrant
Climbing
Space
Road Face
Quadrant
Climbing
Space
5" Min
CL
LC
Direction of Vehicular Traffic
TOP VIEW
4' x 4' Work Pit
(Pole Butt Must Be Exposed)
UTILITIES
CONTACT
PHONE#
COUNTY
1/4 SEC
U-MAP NO (POWER)
OP MAP
Emer Sect Gas Wk Ctr POWER WK CTR
PLAT MAP
JOINT FACILITIES ARRANGEMENTS
DRAWN BY
CHECKED BY
APPROVED BY
FOREMAN #1
FOREMAN #2
MAPPING
INCIDENT MAOP
Gas Order Elect Order
SCALE PAGE
ENGR - POWER
ENGR - GAS
FUNCTION
PROJECT MGR
PERMITREAL ESTATE/EASEMENT
2
1
REV#
3
DATE DESCRIPTIONBY
CONTACT PHONE NO DATE
OH CKT MAP CIRCUIT NOUG CKT MAP
J. CHAU 253-208-9480 10/1/23
R. REYNOLDS 253-262-7409 10/1/23
R.REYNOLDS 253-262-7409 10/1/23
RW-______RENTON
SOUND FORD EV CHARGERS
3-PHASE PRIMARY L/E, SERVICE CONNECT
101 SW GRADY WAY, RENTON, WA 98052
N/A N/A
N/A 105104442
AS NOTED 2 OF 2
KING N/A N/A CSPSKEPM
NW 19-23N-05E N/A N/A
2305E074 2305E076 2305E074SE GRA-26
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
JBOX B-FLY DETAIL (J01)
SCALE: NONE
EXIST 4" (P01)
EXIST 4" (V01/EM1)
EXIST 4" (V02)
MFP24002604