HomeMy WebLinkAboutR-429327A PORTION OF THE NW 1/4 OF THE NW 1/4 OF SEC. 28, TWN. 23 N., RGE. 05 E., W.M.
w
POST CAP, -
TYP.
STRETCHER BAR,
TYP.
LINE, END AND
CORNER POST,
TYP.
LINE, END AND
CORNER POST,
TYP.
LINE, END AND
CORNER POST,
TYP.
ADJACENT CONDITION
REFER TO SITE PLAN
-I
°°'
.
�a
a
�I
TOP RAIL
CHAIN LINK FABRIC
AND TIES
STRETCHER BAR
BANDS AT 12" O.C., Q
TYP. J
w
w
w
CD
w
BOTTOM RAIL =
2" MAX
FINISH GRADE
it
HOLD TOP OF FOOTING
6" BELOW FINISH GRADE
III
FOOTING, SIZE °
NOTES: NOTED BELOW
1. SEE SPECIFICATION SECTION 323113 FOR ADDITIONAL INFORMATION ON POSTS, RAILS, FOOTING AND OTHER COMPONENTS.
2. PROVIDE CONCRETE MOW STRIPS WHERE SHOWN ON DRAWINGS.
3. REFER TO SITE PLAN AND GATE SCHEDULE FOR LOCATIONS OF GALVANIZED FINISH.
4. ALL MESH OPENING TO BE 1" OR OTHERWISE NOTED ON PLAN.
5. PROVIDE CONTROL OR EXPANSION JOINT AT EACH POST LOCATED IN CONCRETE.
6. POST SPACING 10'-0" O.C. MAX.
7. END/CORNER POST FOOTINGS: 12" HOLE DIAMETER, 42" DEEP, 36" POST EMBEDMENT.
8. LINE POST FOOTINGS: 12" HOLE DIAMETER, 36" DEEP, 30" POST EMBEDMENT.
4'-6' HT. CHAIN LINK FENCE
1/2" = 1'-O"
POST CAP,
TYP.
STRETCHER BAR,
TYP.
STRETCHER BAR
BANDS AT 12"
O.C., TYP.
LINE, END AND
CORNER POST,
TYP.
FINISH GRADE
I
IFYI
HOLD TOP OF
FOOTING 6" BELOW
FINISH GRADE
SIN LINK
RIC AND
IDLE RAIL LLICi
CD
w
o_
;A.
SION WIRE
U
DO
NJ
c�
BOTTOM RAIL w
N
1" MAX. AT BALLFIELDS AND TENNIS,
2" MAX. ELSEWHERE
FOOTING, SIZE NOTED BELOW
P-CA-01
NOTES: a
1. SEE SPECIFICATION SECTION 323113 FOR ADDITIONAL INFORMATION ON POSTS, RAILS, FOOTING AND OTHER COMPONENTS.
2. POST SPACING 10'-0" MAX.
3. PROVIDE CONCRETE MOW STRIPS WHERE SHOWN ON DRAWINGS.
4. REFER TO SITE PLAN AND GATE SCHEDULE FOR LOCATIONS OF GALVANIZED OR BLACK VINYL FINISH.
5. ALL MESH OPENING TO BE 1" OR OTHERWISE NOTED ON PLAN.
6. PROVIDE CONTROL OR EXPANSION JOINT CENTERED ON EACH POST.
7. END/CORNER POST FOOTINGS: 12" HOLE DIAMETER, 48" DEEP, 42" POST EMBEDMENT.
8. LINE POST FOOTINGS: 12" HOLE DIAMETER, 42" DEEP, 36" POST EMBEDMENT.
7 '-10' HT. CHAIN LINK FENCE
AS NOTED
HINGE POST
6" CLEAR
CDcf)
z;�E
U 0'
zw
��
w0
zo
J w
o �
COMMERCIAL
w z
GRADE
�
BULLDOG
Q
o
HINGE
=
Q�
�
w
Q U
�w
I
6" CLEAR -
..a
FOOTING, SIZE
NOTED BELOW
LATCH POST
TRUSS ROD W/ TURNBUCKLE
CHAIN LINK FABRIC AND TIES
FULCRUM STYLE LATCHES
AT ALL GATES. GATE FORK
LATCH FOR HEAVY DUTY PADLOCK
STRETCHER BAR
-TYP. 4 SIDES
2" CLEAR FROM FIN. GRADE
ALL JOINTS WELDED TO MAKE
SOLID FRAME
FINISH GRADE
HOLD TOP OF FOOTING
6" BELOW FINISH GRADE
-TYP.
NOTES:
1. SEE SPECIFICATION SECTION 323113 FOR ADDITIONAL INFORMATION ON POSTS, FOOTING AND OTHER COMPONENTS.
2. ALL GATES TO BE INSTALLED PLUMB, AND SECURE FOR FULL OPENING WITHOUT INTERFERENCES.
3. ATTACH HARDWARE BY MEANS WHICH WILL PREVENT UNAUTHORIZED REMOVAL.
4. ADJUST HARDWARE FOR SMOOTH OPERATION.
5. REFER TO SITE PLAN AND GATE SCHEDULE FOR LOCATIONS OF GALVANIZED OR BLACK VINYL FINISH.
6. ALL MESH OPENING TO BE 1" OR OTHERWISE NOTED ON PLAN.
7. GATE POST FOOTINGS: 12" HOLE DIAMETER, 42" DEEP, 42" POST EMBEDMENT.
SINGLE CHAIN LINK GATE
1/2" = 1'-O"
P-CA-04
3 MAX.
NOTES:
30'-0" O.C. MAX. 1. 1" EYE BOLT LOCATED NEAR TOP OF
POLE ASSEMBLY. PLACEMENT TO
-' ��SEE ENLARGEMENT ACCOUNT FOR POTENTIAL OF UP TO 18"
OF SAG IN THE TOP SUPPORT CABLE AT
f 70LBF OF TENSION WITH NETTING 11'
PLACE.
2. GALV. OR SS THREADED CARABINEF
X 1-1/2".
3. GALV. THEEL THIMBLE SIZED FOR
SPECIFIED WIRE ROPE; USE AT ALL
CABLE TERMINATORS.
0 4. GALV. STEEL WIRE ROPE, 5 O.D.
of 5. WIRE ROPE CONNECTOR, U-BOLT T'
N MIN (2) PER CONNECTION.
6. 10' FENCING WITH 20' NETTING TO
INSTALLED UNDER SEPERATE PERMI
INTERMEDIATE EYE BOLT
TURNBUCKLE ASSEMBLY
#1 #5
#2 #3 #4
0
0
% 1 11 1 11 \/ E I = ENLARGEMENT
FINISH GRADE LINE POST,
SEE SPECIFICATION
FOR FOOTING SIZE
NET SUPPORT POST.
SEE SPECIFICATIONS
FOR FOOTING SIZE
WIDTHS VARY - SEE PLAN AND GATE SCHEDULE
_---HINGE POST iIL 3" CLR. MAX
J
U
w
J
U
'll I
FOOTING, SIZE a
NOTED BELOW
MALLEABLE
INDUSTRIAL
HINGE
a d
0
III l i' I
J
U p
i` I
12" DIA. CONC. CENTER
STOP WITH PVC SLEEVE
INSERT. PROVIDE A SIMILAR
STOP FOR EACH GATE ARM
TO HOLD IN OPEN POSITION
FULCRUM STYLE
LOCKABLE
GATE FORK LATC1
FOR HEAVY DUTY
PADLOCK
�Z
DROP ROD
ASSEMBLY
- a
ALL JOINTS WELDED
TO MAKE SOLID FRAME °
HOLD TOP OF
FOOTING 6" BELOW
FINISH GRADE, TYP.
HINGE POST
STRETCHER
BAR (TYP.
4 SIDES)
TRUSS RODS W/
TURNBUCKLES,
SEE SPECS
PROVIDE FIRE
DEPARTMENT
KNOX BOX,
FIELD LOCATE
PER FIRE
INSPECTOR
CHAIN LINK
FABRIC AND
TIES
FINISH
GRADE
NOTES:
1. SEE SPECIFICATION SECTION 323113 FOR ADDITIONAL INFORMATION ON POSTS, FOOTING AND OTHER COMPONENTS.
2. ALL GATES TO BE INSTALLED PLUMB AND SECURE FOR FULL OPENING WITHOUT INTERFERENCES.
3. ATTACH HARDWARE BY MEANS WHICH WILL PREVENT UNAUTHORIZED REMOVAL.
4. TACK WELD ALL GATE HARDWARE AFTER ADJUSTMENT.
5. ADJUST HARDWARE FOR SMOOTH OPERATION.
6. PROVIDE CANE BOLT AND RECEPTACLE IN PAVEMENT TO SECURE EACH SIDE IN FULLY OPEN POSITION.
7. REFER TO SITE PLAN AND GATE SCHEDULE FOR LOCATIONS OF GALVANIZED OR BLACK VINYL FINISH.
8. ALL MESH OPENING TO BE 1" OR OTHERWISE NOTED ON PLAN.
9. PROVIDE FIRE DEPARTMENT KNOX BOX AS INDICATED ON GATE SCHEDULE. FIELD LOCATE PER FIRE INSPECTOR.
10.GATE POST FOOTINGS: 12" HOLE DIAMETER, 42" DEEP, 42" POST EMBEDMENT.
DOUBLE SWING CHAIN LINK GATE
1/2" = 1'-O"
ELEVATION
10' HT. FENCING W/20' HT. NETTING
1/2" = 1'-O" P-CA-06 J 3/16" = 1'-0"
BID SET
EB
4/05/24
SURVEYED:
PERMIT COMMENTS
EB
4/19/24
DESIGNED:
ADDENDUM 1
EB
4/30/24
DRAWN:
EB/AM
CHECKED:
TY
N0.
REVISION
BY
DATE
APPR
APPROVED:
AR
SCALE:
ONE INCH
AT FULL SCALE
IF NOT ONE INCH
SCALE ACCORDINGLY
VERTICAL: NAVD 1988
HORIZONTAL: NAD 1983/1991
DATUM
--YEBOLT
I" GALV. STEEL
3LE, AT TOP AND
TOM OF NETTING
TING,
SPECIFICATIONS
=YE BOLT
TOP RAIL
MIDDLE RAIL
10' HT. CHAINLINK
FENCING
TENSION WIRE
BOTTOM RAIL
FINISH GRADE
INFIELD SKIN
MIX OR LAWN
JTION
CITY OF
RENTON
Planning/Building/Public Works Dept.
P-CA-11
1430 NE 65th Street
Seattle, WA 98115
t: 206-322-1732
fora.land
IN COMPLIANCE WITH CITY OF RENTON STANDARDS
DEVELOPMENT ENGINEERING
SAMorman 06/07/2024
CASCADE ELEMENTARY SCHOOL
FIELD IMPROVEMENTS
SITE DETAILS
DATE:
04/19/24
FIELDBOOK:
PAGE:
DRAWING NO:
L4.04
sHFFr: 27 of 34
O
LO
O
O
N
3%
u
R-424327