Loading...
HomeMy WebLinkAboutM_antenna specs_180329_v1All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-433-V_v1 Antenna Systems Group 12/9/2016 X7CQAP-FRO-433-V +/-45°polarization, (1) 698-896 MHz & (2)1710-2180 MHz antennas, 50” length, Fast Roll Off (FRO) 33° horizontal pattern, variable E-Tilt •FRO improves intra-and inter-cell SINR •Separate housing and reflector construction optimizes RF performance while maximizing mechanical strength •Good passive intermodulation (PIM) performance reduces harmful interference •Independent tilt per array •Suitable for LTE/CDMA/UMTS/GSM •AISG 2.0 RET control ELECTRICAL SPECIFICATIONS Frequency band, MHz 698-824 824-896 1695-1880 1880-1990 1990-2180 Horizontal beamwidth, 3 dB points 34°30°38°38°36° Gain, dBi 17.2 17.8 18.7 18.8 18.8 Vertical beamwidth, 3 dB points 17.5°15.9°8.1°7.6°7.2° Upper side lobe suppression, typical, dB <-16 <-16 <-16 <-16 <-16 Front-to-back at 180°, dB > 30 > 28 Polarization +/-45°2x +/-45° Electrical downtilt 0°-20°0°-12° VSWR/return loss, dB, maximum 1.5:1/14.0 1.5:1/14.0 Isolation between ports, dB, minimum >28 >28 Co-pole isolation inter-antenna N/A > 28 Intermodulation (2x20 W), IM3, dBc -153 -153 Impedance, ohms 50 50 Maximum power per connector, CW (W)500 250 RECEIVED 04/10/2018 amorganroth PLANNING DIVISION All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-433-V_v1 X7CQAP -FRO -433-V 12/9/2016 MECHANICAL SPECIFICATIONS Dimensions, length/width/depth 50.5 x 24 x 9.1 in. (1283/610/230 mm) Connector (quantity) type non-IP model (6 total: 2 low-, 4 high-band) 7-16 DIN female Connector torque 220-265 lbf-in (23-30 N-m) Connector location back Antenna weight 54.5 lbs. (24.72 kg) Bracket weight 13.2 lbs.(6.0 kg) Standard bracket kit P/N 919046 (Included) Mechanical downtilt range 0°-9° Radome material high-strength Luran®UV stabilized, ASTM D1925 Wind survival 130 mph (209 km/h) Front wind load @100 mph 240.2 lbf (1068.7 N) @100mph Equivalent flat plate @100 mph 8.0 sq.ft. (c=2) @ 100mph RET INFORMATION Model RET-200 Mounting location Rear of antenna Communication standard AISG 2.0 Control system PCU-220 ORDER INFORMATION MODEL DESCRIPTION X7CQAP-FRO-433-VR 4F, HEX, FRO, 33°, 0-20°/0-12°EDT with remote adjust E-tilts (EDT) RET ORDERING INFORMATION MODEL DESCRIPTION 992100-CA005-SC AISG jumper cable, M/F, 0.5 meters All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-433-V_v1 X7CQAP -FRO -433-V 12/9/2016 MECHANICAL VIEWS: X7CQAP-FRO-433-VR All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-433-V_v1 X7CQAP -FRO -433-V 12/9/2016 Standard bracket kit All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-833-V_v1 Antenna Systems Group 12/11/2017 X7CQAP-FRO-833-V +/-45°polarization, (1) 698-896 MHz & (2)1710-2180 MHz antennas, 96” Length, Fast Roll Off (FRO) 33 ° horizontal pattern, variable E-Tilt •FRO improves intra-and inter-cell SINR •Separate housing and reflector construction optimizes RF performance while maximizing mechanical strength •Good passive intermodulation (PIM) performance reduces harmful interference •Independent tilt per array •Suitable for LTE/CDMA/UMTS/GSM •AISG 2.0 RET control ELECTRICAL SPECIFICATIONS Frequency band, MHz 698-824 824-896 1695-1880 1880-1990 1990-2180 Horizontal beamwidth, 3 dB points 35°38°38°36°30° Gain, dBi 19.3 19.7 19.1 19.5 19.8 Vertical beamwidth, 3 dB points 9.7°8.5°6.1°5.8°5.5° Upper side lobe suppression, typical, dB <-16 <-16 <-16 <-16 <-16 Front-to-back at 180°, dB > 30 > 28 Polarization +/-45°2x +/-45° Electrical downtilt 0°-10°0°-12° VSWR/return loss, dB, maximum 1.5:1/14.0 1.5:1/14.0 Isolation between ports, dB, minimum >28 >28 Co-pole isolation inter-antenna N/A > 28 Intermodulation (2x20 W ), IM3, dBc -153 -153 Impedance, ohms 50 50 Maximum power per connector, CW (W)500 250 All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-833-V_v1 X7CQAP -FRO -833-V 12/11/2017 MECHANICAL SPECIFICATIONS Dimensions, length/width/depth 96.0 x 24 x 9.4 in. (2438.4/609.6/246.38 mm) Connector (quantity) type non-IP model (6 total: 2 low-, 4 high band) 7-16 DIN female Connector torque 220-265 lbf-in (23-30 N-m) Connector location back Antenna weight 85 lbs. (38.5554 kg) Bracket weight 18.2 lbs.(8.25 kg) Standard bracket kit P/N 919032 (Included) Mechanical downtilt range 0°-6° Radome material high-strength Luran®UV stabilized, ASTM D1925 Wind survival 100 mph (160 km/h) Front wind load @100 mph 397.6 lbf (1768.5 N) @100mph Equivalent flat plate @100 mph 7.92 sq.ft. (c=2) @ 100mph RET INFORMATION Model RET-200 Mounting location Rear of antenna Communication standard AISG 2.0 Control system PCU-220 ORDER INFORMATION MODEL DESCRIPTION X7CQAP-FRO-833-VR 8F,HEX,FRO,33°0-10°/0-12°EDT with remote adjust E-tilts (EDT) RET ORDERING INFORMATION MODEL DESCRIPTION 992100-CA005-SC AISG jumper cable, M/F, 0.5 meters OPTIONAL BRACKET OPTION MODEL DESCRIPTION 919049 Optional bracket kit, 3-point, 6-degree D-tilt, For 4.5" OD Pole All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-833-V_v1 X7CQAP -FRO -833-V 12/11/2017 MECHANICAL VIEWS: X7CQAP-FRO-833-VR All specifications are subject to change. Refer to www.jmawireless.com for the most current information. www.jmawireless.com +1 315-431-7100 | customerservice@jmawireless.com X7CQAP-FRO-833-V_v1 X7CQAP -FRO -833-V 12/11/2017 Standard bracket kit Optional bracket kit