HomeMy WebLinkAboutCAG-20-065 - Duvall - A64 - Silt Fence Silt Fence shall be 5 ft in height
IllkNORTHWEST LININGS &
GEOTEXTILE PRODUCTS, Inc.
■ "Helping■ to Protect the Environment"
2100000 77th Avenue South
Kent,WA 98032
1111 (253)872-0244•(800)729-6954
FAX: (253)872-0245
www.northwestlinings.com
SILT FENCE MATERIAL (ORANGE)
PERMEATEX 2180S
3',4', E• 5'
PHYSICAL PROPERTY UNIT TEST METHOD MARV VALUES
US Values US Values
Grab Tensile Lbs ASTM D4632 180
Grab Elongation % ASTM D4632 15
Puncture Strength Lbs ASTM D4833 90
Trapezoidal Tear Lbs ASTM D4533 70
Mullen Burst psi ASTM D3786 305
A.O.S. U.S. Sieve ASTM D4751 40 J
Water Permittivity sec ASTM D4491 .07 J
U.V. Resistance (500 Hours) % ASTM D4355 90 J
Note : Minimum average roll values are based on a 95% confidence level.
PermeaTex Geotextile Products are manufactured by various manufacturers for distribution by Northwest Linings. PermeaTex is a
trade name of Northwest Linings and any use of this name without the express written consent of Northwest Linings is strictly
prohibited.
The information and data contained herein are believed to be accurate and reliable. Northwest Linings
makes no warranty of any kind and accepts no responsibility for the results obtained through application of
this information.
4it♦
Washington State
•/ Department of Transportation Request for Approval of Material
Contract Number FA Number NSA SR Duvall Ave NE Date
CAG 20-065
Section/Title of Project Duvall Ave NE County King
Contractor Reed Trucking & Excavating, Inc. Subcontractor
Northwest Linings & Geotextile Products, Inc.
This form shall be completed prior to submittal. If this form is not compete at time of submittal It may For WSDOT Use Only
be returned for information that was omitted. RAM 0 1
PE Lisa Bid Item Material or Name and Location of Fabricator, Specification PE/QPL Hdgtr./QPL HQ Use
No. , Product/Type Manufacturer or Pit Number Reference Code Code
A64 Geotextile Orange Silt Fence Fabric 21803 8-01 8
A64 Posts 6' Steel Tee Posts 8-01 8
•
Projectcngineer/Re sentative Date State Materials Engineer/Representative Date
c tance Ac on Codes for use by P oject Engineer and State Materials Laboratory
1. Acce nce ena: Acceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated into
proj .
2. Acceptance Criteria: Mfg.Cert.of Compliance for'Acceptance'prior to use of material.
3. Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material. Catalog Cut Approved ❑Yes ❑No
4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material.
5. Acceptance Criteria: Only'Approved for Shipment','WSDOT Inspected'or'Fabrication Approved Decal'material shall be used.
6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office.
7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action.
0 Source Approved: Visual Acceptance
9. Approval Withheld: Submit samples for preliminary evaluation.
10. Approval Withheld:
11. Miscellaneous Acceptance Criteria.
Remarks
(PE): Silt fence shall be 5 ft in height
Remarks
(HQ):
DOT Form 350-071 Project Engineer Distribution
Revised 03/2021 ®Contractor El Region Operations Engineer 0 Febncetion Inapecllon El Region Materiels El State Matenals Lab-MS 47365
Mill Certification MTR#:758137-4
r I LJ=0 R® 07/19/2021 Lot#:120103327462
W CEMETERY ROAD
PLYMOUTH, UT 84330 US
800 453-2886
Fax:435 458-2309
Sold To: CDOW WHOLESALE Ship To: CDOW WHOLESALE
790 WAGNER WAY NORTHWEST LININGS and GEOTEXTILE PRODUCT
LANTANA,TX 76226 US 20824 77TH AVE SOUTH
KENT,WA 98032 US
Customer PO 8972 Sales Order# 12067756-3.1
Product Group Grape Stakes Product# 2164121
Grade Non-Certified Lot# 120103327462
Size 0.95# Heat# 1201033274
BOL# BOL-868448 Load# 758137
Description Grape Stakes Studded T-Post 0.95#Non-Certified 5'0"[601 No Customer Part#
Paint No Tip No Spade 400 pcs
Production Date 07/13/2021 Qty Shipped LBS 39900
Product Country United States Qty Shipped EA 8400
Of Origin
Original Item Original Item
Description • Number
I hereby certify that the material described herein has been manufactured in accordance with the specifications and standards listed above and that it satisfies those requirements.
Melt Country of Origin: United States Melting Date: 06/04/2021
Roll Country of Origin : United States Rolling Date: 06/17/2021
C
0.60
Comments:
Material is not certified to a specification or grade
Nucor Steel Utah is in compliance with and certified to:ISO 9001:2015,ISO 14001:2015,ABS Quality Assurance Program&AASHTO's NTPEP
Reinforcing Steel and Wire(REBAR)Technical Committee Work Plan.
All manufacturing processes of the steel materials in this product,including melting,casting and hot rolling have occurred within the United States.
Mercury not intentionally added at any point during manufacture or testing of this product. This material is free of HG contamination and is ROHS
compliant. No weld repair was performed.
Material meets the requirements of the purchase order and have been produced under the Nucor Steel Utah Quality Manual. Mill Certificate complies
with DIN EN 10204—3.1.
Material and Mill Certification are in full compliance with the American Iron and Steel requirement as mandated in EPA's State Revolving Fund Programs
and complies with the Buy America Act,and(FTA)Buy America Requirements(49 C.F.R.part 661 &23 CFR part 635.410).).
FA'_ Page 1 of 1
Bryden Morris, Chief Metallurgist