Loading...
HomeMy WebLinkAboutCAG-20-065 - Duvall - A89 - Painted Wide Lane Line WiaWashington State Department of Transportation Request for Apiproval of Material Contract Number FA Number N/A SR Duvall Ave NE Date f2r 3/1/2022 CAG 20-065 Section!Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor Stripe Rite, Inc This form shall be completed prior to submittal. If this form is not compete at time of submittal it may For WSDOT Use Only be returned for information that was omitted. RAM# 005B PE Use Bid Item Material or Name and Location of Fabricator, Specification PEIQPL Hdgtr./QPL HQ Use No. Product(rype Manufacturer or Pit Number Reference Code Code A88-A89 Solventpaint Ennis Flint ( )9-34.2 4 8, 3101 Salem, OR A88-A89 WB paint Ennis Flint 9-34.2(5) 8, 3101 Salem, OR A88-A89 reflective Potters Inc 9-34.4 8, 3101 glass bead Canby, OR Project Engineer/Representative . Date State Materials Engineer/Representative Date 3/7/2022 _ Acceptance Action Codes for use by Project Engineer and State Materials Laboratory 1. Acceptance Criteria: Acceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated into project. 2. Acceptance Criteria: Mfg.Cert.of Compliance for'Acceptance'prior to use of material. 3. Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material. Catalog Cut Approved ❑Yes ❑No 4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment','WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. ()Source Approved: Visual Inspection Required 9. Approval Withheld: Submit samples for preliminary evaluation. 10. Approval Withheld: 11. Miscellaneous Acceptance Criteria. Remarks (PE): Remarks Use of Paint material for BI A88 &A89 per the Proposal (HO): Paint material meets WSDOT 9-34.2(4) and Glass Beads meets WSDOT 9-34.4 since Special Provisions do not include project specific requirements for these materials DOT Form 350-071 Project Engineer Distribution Revised 03/2021 ®Contractor DRegion Operations Engineer OFebrication Inspection Region Materials l=1 State Materials Lab-MS 47365 EF Series Fast Dry Low VOC Solvent Based Traffic Paint PRODUCT DATA Product Type: Fast Dry Low VOC Solvent Based Product Code: 985691 985697 Product Color: White Lead Free Yellow Description: SB WHT 150 VOC HWVW1 SB LF YEL 150 VOC HWVY3 Specification: WA DOT 9.34.2(4) Effective Date: October 31, 2016 Product Description: A user friendly,fast drying, low voc solvent based traffic paint Physical Characteristics: suitable for application by airless or air atomized equipment. May be used to stripe roadways, airports and parking lots with or % Total weight solids: 65% minimum without pressure applied glass beads. It offers all of the benefits of a low VOC solvent based paint, and quickly dries to a no track % Total Pigment solids: 53% maximum condition. This product meets WA DOT Specification 9-34.2(4)for %Viscosity in Krebs Units: 75-85 Low VOC Solvent based Traffic Paint. Weight per gallon: 11.8 lbs./gal min Product Advantages: Contrast ratio 5 wet mils: 0.92 minimum • Below 150 VOC—use year round Reflectance/white: 80 minimum • Product reduces and cleans up with acetone Reflectance/yellow: 50 minimum • Performs equally well on both asphalt and concrete Titanium Dioxide in white: 1 lb. minimum • Paint demonstrates excellent bead retention • Keeps traffic control to a minimum when striping Titanium Dioxide in yellow: 0.2 lbs. minimum • Can be used for symbols,legends and lane marking Dry Time: Without drop on glass beads,this paint dries Packa in to a lab ASTM D711 no pickup in less than 10 minutes @ g g' 15 mils when ambient and surface temperature are 77°F This paint is available in 5 gallon pails, 55 gallon drums and 275 at 50±5%humidity.When glass beads are applied at a gallon totes.Other packaging available on request. rate of at least 6 pounds per gallon to a 15 mil wet line,the Storage: field applied paint will dry to an ASTM D713 no-track in less than 1 minute when applied at the weather conditions Shelf life of the unopened product is one year from date of above. manufacture with proper storage and minimal agitation.Proper storage includes inside or covered,above 35° F(3°C), and out of Limitations: Applying a test strip to determine dry to direct sunlight. Outside storage for short intervals is acceptable. no-pickup time when the humidity is higher than 65%. Cone whenever necessary. Conditions for Application: •Do not heat paint in striping system above 60 C. All surfaces must be clean, dry and free from oil, grease, • Do not apply when temperatures are below 3 C. antifreeze,loose sand,aggregate and chipping/peeling existing • Do not apply when rain is forecast. striping.Any curing compounds used on new concrete must be • Do not apply when temperatures are near or below the mechanically abraded off prior to striping.When striping on freshly dew point or rain is forecast within 1 hour. sealed surfaces use caution as some sealers can affect the curing • Do not thin more than 5%with acetone,and then use and adhesion of traffic paint.When in doubt, always test adhesion. immediately. For complete drying and minimum dirt retention when striping parking lots,the lots should be closed to traffic for two hours minimum after painting. New asphalt and concrete should be allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of cur knowledge,true and accurate,but all recommendations are made Nithout warranty,expressed or implied.Because the condtions of use are beyond our control,nether Ennis. Flint nor its agents shall be liable for any injury,loss or damage.drect or consequential,arising from the use orthe ittt inability to use the product described herein.As Ennis-Fint has neither consul over the installation of product described herein nor control of the environmental factors the installed marldngs are subjected to,there is no guarantee as to the durability or the retrorekectve properties of any marking system ogled.No person is authorized to make any statement or recommendation not contained in the Pmdud Data,and any such statement or recommendation,if made,shall not bind the Corporation.Fuller,nothing contained herein shall be construed as a recommendation to use any product in cordlid with existing patents,and no license under the dams of any patent is ether implied or granted. ENN/S—FLINT A Traffic Safety Solutions Company 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2013 Ennis-Flint. All Rights Reserved Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=199366... Washington State March 7,2022 Qualified Product List Contractor Product Information Contractor: Contract No: Sub Contractor: ) Date: Bid Item: Manufacturer: Ennis-Flint, Inc. - Salem, OR Product Name: Morline: White I.D. No. 985691/HWVW1 and Yellow I.D. No. 985697/HWVY3 Standard Spec : 9-34.2(4), Pavement Marking - Low VOC Solvent Based Paint Product Description : Permanent pavement marking paint: Low VOC solvent based; Sprayed application. Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Aug 1, 2019 To be completed by the field inspector: Quantity: Verified By: Date: 1 of 1 3/7/2022, 1:17 PM Fast Dry Waterborne Traffic Paint PRODUCT DATA Product Type: Standard Fast Dry Waterborne Product Code: 983711 983712 Product Color: White (37925) Lead Free Yellow(33538) Fed 595E Color STD Description: WB WHT OR FAST DRY ORW21M4 WB YEL OR FAST DRY ORY21M1 Specification: Meets WA DOT 9-34 Effective Date: Jan. 22,2019 Product Description: Physical Characteristics: A 100%acrylic polymer latex binder, high solids,fast drying waterborne traffic paint suitable for application by airless or air atomized equipment. May be used to stripe roadways,airports %Total solids/weight: 75% minimum and parking lots with or without pressure applied glass beads.It %Total Solids/volume: 68% minimum offers all of the benefits of a water reducible paint,and quickly Weight% Pigment Solids: 68%maximum dries to a no track condition. This paint meets WA DOT specification 9-34. Viscosity in Krebs Units: 80-95 White Reflectance(Y value) 88 minimum Product Advantages: Yellow Reflectance (Y value) 50 minimum • Non-flammable and below 150 VOC Hiding at 15 mils wet,white: 0.98 minimum • Product reduces and cleans up with water • Performs equally well on both asphalt and concrete Hiding at 15 mils wet,yellow 0.96 • Paint demonstrates excellent bead retention VOC in grams per liter: 150 maximum • Keeps traffic control to a minimum when striping Weight per gallon: 13.7-14.3 • Can be used for symbols,legends and lane marking Dry Time: Without drop on glass beads,this paint dries Packaging: to a lab ASTM D711 no pickup in less than 10 minutes @ This paint is available in 5 gallon pails, 55 gallon drums and 275 15 mils when ambient and surface temperature are 77° F gallon totes.Other packaging available on request. at 50±5% humidity.When glass beads are applied at a rate of at least 6 pounds per gallon to a 15 mil wet line, Storage: the field applied paint will dry to an ASTM D713 no-track Shelf life of the unopened product is one year from date of in less than 2 minutes when applied at the weather manufacture with proper storage and minimal agitation. Proper conditions above. storage includes inside or covered,above 35° F(3° C),and out of direct sunlight.Outside storage for short intervals is acceptable. Limitations: Applying a test strip to determine dry to no- pickup time when the humidity is higher than 65%. Conditions for Application: Cone whenever necessary. All surfaces must be clean, dry and free from oil,grease, antifreeze, •Do not heat paint in striping system above 110°F. loose sand,aggregate and chipping/peeling existing striping.Any • Do not apply when temperatures are below 50 F. curing compounds used on new concrete must be mechanically • Do not apply when rain is forecast. abraded off prior to striping.When striping on freshly sealed • Do not apply when temperatures are near or below the surfaces use caution as some sealers can affect the curing and dew point or rain is forecast within 1 hour. adhesion of traffic paint When in doubt,always test adhesion.For • Do not thin more than 5%with water and then use complete drying and minimum dirt retention when striping immediately. parking lots,the lots should be closed to traffic for two hours • Do not apply if temperature is expected to fall below minimum after painting. New asphalt and concrete should be freezing for 6 hours after application. allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of our knowledge,true and accurate,but all recommendations are made without warranty,expressed or implied.Because the conditions of use are beyond cur control,neither Ennis-Flint nor its agents shall be liable for any injury,loss or damage,direct or consequential,arising from the use or the inability to use the product described herein.As Ennis-Flint has neither control over the installation of product described herein nor control of the environmental factors the installed markings are subjected to,there s no guarantee as to the durability or the retroreflective properties of any marking system applied No person is authorized to make any statement or recommendation not contained in the Product Data,and any such statement or recommendation,B made,shall not bind the Corporation.Further,nothing contained herein shall be �-� construed as a recommendation to use any product in conflict with exsting patents,and no license under the claims of any patent is either implied or granted Emits-FLINT The Mark of Traffic Safety 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2018 Ennis-Flint.,Inc All Rights Reserved Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=201100... Washington State March 7,2022 Qualified Product List Contractor Product Information Contractor: Contract No: Sub Contractor: Date: Bid Item: Manufacturer: Ennis-Flint, Inc. - Salem, OR Product Name: White I.D. No. 983711; Yellow I.D. No. 983712 Standard Spec : 9-34.2(5), Pavement Marking - Low VOC Waterborne Paint Product Description : Permanent pavement marking paint: Low VOC, Waterborne; sprayed application Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Sep 26, 2018 To be completed by the field inspector: Quantity: Verified By: Date: 1 of 1 3/7/2022, 1:14 PM Potters Highway Safety Marking Spheres with Coating SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Product Name Highway Safety Marking Spheres with Coating Standard Highway Safety Marking Spheres with Coating Premium Highway Safety Marking Spheres with Coating VISIBEAD®Highway Safety Marking Spheres with Coating VISIBEAD®Plus II Highway Safety Marking Spheres with Coating Premix Highway Safety Marking CAS No. 65997-17-3 EINECS No. 2660460 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use(s) Road safety markings 1.3 Details of the supplier of the safety data sheet Company Identification Potters Industries LLC P. O. Box 841 Valley Forge, PA 19482 USA Telephone +1 610-651-4700 E-Mail(competent person) sds.uk@pgcorp.com 1.4 Emergency telephone number Emergency Phone No. Potters Industries LLC+1 610-651-4200 ChemTrec(800)424-9300 SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture GHS Classification Not classified as dangerous for supply/use. EC Classification Not classified as dangerous for supply/use. Hazards summary Dust may cause irritation. Spilled material is slippery. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) %W/W CAS No. EINECS No. / EC Classification and REACH Registration Risk Phrases Glass oxide; Glass >99 65997-17-3 2660460 Not applicable. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart,for at least 15 minutes. If symptoms persist, obtain medical attention. Skin Contact Wash affected skin with plenty of water. If symptoms occur obtain medical attention. Inhalation In case of accident by inhalation: remove casualty to fresh air and keep at rest. If symptoms develop, obtain medical attention. Revision: v1 Ref: 0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 1 of 4 1 -!Otters Highway Safety Marking Spheres with Coating Ingestion Do not induce vomiting. If symptoms develop, obtain medical attention. 4.2 Most important symptoms Dust may cause irritation. Spilled material is slippery. Dust may and effects, both acute and cause discomfort and mild irritation. delayed SECTION 5: FIRE-FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media As appropriate for surrounding fire. Unsuitable extinguishing Media None known. 5.2 Special hazards arising from Spilled material can make floors slippery. the substance or mixture SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, Wear suitable protective clothing. Wear eye/face protection. protective equipment and emergency procedures 6.2 Environmental precautions Not applicable. 6.3 Methods and materials for Caution-spillages may be slippery. Avoid generation of dust. containment and cleaning up Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal. 6.4 Reference to other sections Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling Avoid contact with eyes, skin and clothing.Avoid generation of dust.Wash thoroughly after handling. Wear protective equipment to comply with good occupational hygiene practice. Do not eat, drink or smoke at the work place. 7.2 Conditions for safe storage, Keep container tightly closed and dry. including any incompatibilities 7.3 Specific end use(s) Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters SUBSTANCE. Occupational Exposure Limits Glass oxide; Glass No Occupational Exposure Limit assigned. 15mg/m3 total dust 5mg/m3 respirable (Particulates Not Otherwise Regulated) 8.2 Exposure controls 8.2.1 Appropriate engineering Engineering methods to prevent or control exposure are controls preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process conditions. 8.2.2 Personal Protection Respiratory protection Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded. Eye/face protection Safety spectacles Skin protection Wear suitable protective clothing and gloves. For example cotton or rubber. Revision: v1 Ref: 0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue: 08/2011 -en- Page: 2 of 4 � �� potters Highway Safety Marking Spheres with Coating SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance Glass Powder.White. Odour Odourless. Odour Threshold(ppm) Not applicable. pH (Value) Not applicable. Freezing Point(°C) Not applicable. Melting Point(°C) Approx 730 C Boiling Point(°C) Not applicable. Flash Point(°C) [Closed cup] Not applicable. Evaporation rate Not applicable. Flammability(solid, gas) Non-combustible. Vapour Pressure(mm Hg) Not applicable. Vapour Density(Air=1) Not applicable. Solubility(Water) Insoluble. Partition Coefficient Not applicable. Auto Ignition Point (°C) Not applicable. Decomposition Temperature(°C) Not applicable. Viscosity(mPa. s) Not applicable. Explosive properties Not applicable. Oxidising Properties Not applicable. 9.2 Other information Not available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Avoid contact with strong acids 10.2 Chemical stability Stable. 10.3 Possibility of hazardous Not applicable. reactions 10.4 Conditions to avoid Not applicable. 10.5 Incompatible materials None known. 10.6 Hazardous decomposition None known. product(s) SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity Ingestion The acute oral toxicity of this product has not been tested. A similar material was nontoxic to rats at 5,000 mg/kg. Inhalation No data. May cause irritation to the respiratory system. Skin Contact Dust may cause mechanical irritation. Eye Contact Dust may cause mechanical irritation. Sensitisation Not sensitising. Carcinogenicity There are no known reports of carcinogenicity of nonfibrous glass. Reproductive toxicity No evidence of reproductive effects. SECTION 12: ECOLOGICAL INFORMATION 12.1 Toxicity No environmental hazards have been reported or known. 12.2 Persistence and This material is persistent but inert in aquatic systems. It will not degradability bioconcentrate up the food chain. 12.5 Results of PBT and vPvB Not classified as PBT or vPvB. assessment Revision: v1 Ref: 0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 3 of 4 �,� Pottors — Highway Safety Marking Spheres with Coating 12.6 Other adverse effects Not applicable SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should be in accordance with local,state or national legislation. SECTION 14: TRANSPORT INFORMATION 14.2 Proper Shipping Name NOT CLASSED AS DANGEROUS FOR TRANSPORT. SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture TSCA Inventory Status: Reported/Included. AICS Inventory Status: Reported/Included. DSUNDSL Inventory Status: Reported/Included. WHMIS Classification Not classified. German Water Hazard Classification VwVwS:WGK class 1 (low hazard to water). HMIS: 0,0,0 SECTION 16: OTHER INFORMATION This SDS was last reviewed: 08/2014 The following sections contain revisions or new statements:All sections. EC Classification No. 67/548/EEC Not classified as dangerous for supply/use. GHS Classification Not classified as dangerous for supply/use. Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise) is excluded except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or damage(other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. Revision: v1 Ref: 0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue: 08/2011 -en- Page: 4 of 4 Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=199905... Washington State March 7,2022 Qualified Product List Contractor Product Information Contractor: Contract No: Sub Contractor: Date: Bid Item: Manufacturer: Potters Industries, Inc. - Canby, OR Product Name: Glass Beads for Pavement Marking Standard Spec : 9-34.4, Pavement Marking - Glass Beads Product Description : Glass beads: Exterior coating(s) as required for the type of pavement marking being used (Reapproved 5-10-11) Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Mar 19, 2013 To be completed by the field inspector: Quantity: Verified By: Date: 1 of 1 3/7/2022, 1:12 PM 11,71 Washington State Department of Transportation Request for Approval of Material Contract Number FA Number N/A SR Duvall Ave NE Date 8/20/21 CAG 20-065 Section/Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor g, Stripe Rite, Inc This form shall be completed prior to submittal. If this form is not compete at time of submittal it may Fo""rvIT Use Only be returned for Information that was omitted. RAM M 005A PE Use Bid Item Material or Name and Location of Fabricator, Specification PE/QPL Hdgtr.IQPL HQ Use No. Producl/Type Manufacturer or Pit Number Reference , ram!_ Code A88-A89 Solvent paint SEnnisalem Flint 9-34.2(4) 10 OR A88-A89 WB paint Ennis FlintSalem, OR 9-34.2(5) 10 A88-A89 • reflective Potters Inc 9-34.4 10 glass bead Canby, OR ject En eer/Rep entative Date State Materials Engineer/Representative Date 9/10/21 Acce tance Action Codes for use by Project Engineer and State Materials Laboratory 1. Acceptance Criteria' Acceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated into project: ►�1 Acceptance Criteria: Mfg. Cert.of Compliance for'Acceptance'prior to use of material. e Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material. Catalog Cut Approved ©Yes ❑No 4, Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment','WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. Source Approved: s �, ; = Solvent Paint and WB paint are not allowed for A88-A89 Bid items. Plastic line. • MMA, is required per SP 8-22.1, see COR 109 and plan sheets CH1 to CH4 ..roval Wlthht —_is 411:0 Miscellaneous Acceptance Criteria. Surface drop Glass beads shall be "Utah Blend" with a Remarks Methacrylate compatible coupling agent approved by the (PE): material manufacturer, per Special Provision 9-34.4 Remarks This blend does not appear to be made by Potters (HQ): Also, please provide a submittal for Bonded Core Elements per SP 9-34.4 DOT Form 350-071 Project Engineer Distribution Revised 03l2021 ®Contractor Region Operations Engineer Fabncation Inspection Region Materials 0 State Materials Lab-MS 47365 EF Series Fast Dry Low VOC Solvent Based Traffic Paint PRODUCT DATA Pr. ct Type: Fast Dry Low VOC Solvent Based Produ . ode: 985691 985697 Product C. : White Lead Free Yellow Description: .B WHT 150 VOC HWVW1 S= YEL 150 VOC HWVY3 Specification: A DOT 9.34.2(4) Effective Date: October 016 Product Description: A user friendly,fast drying, low voc solve •ased traffic paint Physical Characteristics: suitable for application by airless or air atomi •• equipment. May be used to stripe roadways, airports and parkin. s with or % Total weight solids: 65% minimum without pressure applied glass beads. It offers all o• - benefits of a low VOC solvent based paint, and quickly dries to a n. ack % Total Pigment solids: 53% maximum condition. This product meets WA DOT Specification 9-3... ' or %Viscosity in Krebs Units: 75-85 Low VOC Solvent based Traffic Paint. Weight per gallon: 11.8 lbs./gal min Product Advantages: Contrast ratio 5 wet mils: 0.92 minimum • Below 150 VOC—use year round -flectance/white: 80 minimum • Product reduces and cleans up with ace • e Re" • tance/yellow: 50 minimum • Performs equally well on both asphalt d concrete Titaniu 3 ioxide in white: 1 lb.minimum • Paint demonstrates excellent bead ention • Keeps traffic control to a minim • hen striping Titanium Di• 'de in yellow: 0.2 lbs. minimum • Can be used for symbols, le•- ds and lane marking Dry Time: Without• • on glass beads,this paint dries Parka in to a lab ASTM D711 no • up in less than 10 minutes @ g g: 15 mils when ambient ands • e temperature are 77°F This paint is available gallon pails, 55 gallon drums and 275 p gallon totes. Other• . kaging available on request. at 50±5%humidity.When glass • .ds are applied at a rate of at least 6 pounds per gallon '• - 15 mil wet line,the Storage: field applied paint will dry to an ASTM I '3 no-track in less than 1 minute when applied at the we- -r conditions Shelf life . e unopened product is one year from date of above. manuf-• re with proper storage and minimal agitation. Proper stor- ,- includes inside or covered, above 35° F(3°C), and out of Limitations: Applying a test strip to determine dry dl t sunlight.Outside storage for short intervals is acceptable. no-pickup time when the humidity is higher than 65%. Cone whenever necessary. Conditions for Application: •Do not heat paint in striping system above 60 C. All surfaces must be clean, dry and free from oil, grease, • Do not apply when temperatures are below 3 C. antifreeze, loose sand, aggregate and chipping/peeling existing • Do not apply when rain is forecast. striping.Any curing compounds used on new concrete must be • Do not apply when temperatures are near or below the mechanically abraded off prior to striping.When striping on freshly dew point or rain is forecast within 1 hour. sealed surfaces use caution as some sealers can affect the curing • Do not thin more than 5%with acetone,and then use and adhesion of traffic paint.When in doubt,always test adhesion. immediately. For complete drying and minimum dirt retention when striping parking lots,the lots should be closed to traffic for two hours minimum after painting. New asphalt and concrete should be allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of our knovAedge,true and accurate,but all recommendations are made othout warranty,expressed or implied.Because the condtions of use are beyond our control,neither Ennis. -- Flint nor its agents shall be liable for any injury,loss or damage.drect or consequential,arising from the use or the inability to use the product described herein.As Ennis-Flint has neither control over the installation of product described herein nor control of the environmental factors the installed markings are subjected to,there is no guarantee as to the dirabiity or the retrareflective properties of any marling system appied.No person is authorized to make any statement or recommendation not contained in the Prodid Data,and any such statement or recommendation,if made.shall not bind the Corporation.Further,nothing contained herein shall be construed as a recommendation to use any protEct in conflict Mit existing patents,and no license under the dams of any patent is either implied or granted. ENNIS-FLINT A Traffic Safety Solutions Company 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2013 Ennis-Flint. All Rights Reserved V . Fast Dry Waterborne Traffic Paint PRODUCT DATA Product Type: Standard Fast Dry Waterborne Product Code: 983711 983712 Product Color: White (37925) Lead Free Yellow (33538) Fed 595E Color STD Description: WB WHT OR FAST DRY ORW21M4 WB YEL OR FAST DRY ORY21M1 Spe 'cation: Meets WA DOT 9-34 Effecti - Date: Jan. 22,2019 Product De iption: Physical Charact- stics: A 100%acrylic • mer latex binder, high solids,fast drying waterborne traffic • ' t suitable for application by airless or air atomized equipment. lay be used to stripe roadways,airports %Total solids/weight: 75% minimum and parking lots with or, - hout pressure applied glass beads.It %Total Solids/volu . 68% minimum offers all of the benefits o . ater reducible paint,and quickly Weight% Pigme olids: 68% maximum dries to a no track condition. •is paint meets WA DOT specification 9-34. Viscosity in Kr• •s Units: 80-95 White Refl• ance(Y value) 88 minimum Product Advantages: Yellow • -flectance(Y value) 50 minimum • Non-flammable and below 150 VOC Hid' • at 15 mils wet,white: 0.98 minimum • Product reduces and cleans up with wat- • in at 15 mils wet,yellow 0.96 • Performs equally well on both asphalt and crete 9 • Paint demonstrates excellent bead retention VOC in grams per liter: 150 maximum • Keeps traffic control to a minimum when stripin. Weight per gallon: 13.7 14.3 • Can be used for symbols, legends and lane markin. Dry Time: Without drop on glass beads,this paint dries Packaging: to a lab ASTM D711 no pickup in less than 10 minutes @ This paint is available in 5 gallon pails, 55 gallon drum .nd 275 15 mils when ambient and surface temperature are 77° F gallon totes.Other packaging available on request. at 50±5% humidity.When glass beads are applied at a rate of at least 6 pounds per gallon to a 15 mil wet line, Storage: he field applied paint will dry to an ASTM D713 no-track Shelf life of the unopened product is one :r from date of i -ss than 2 minutes when applied at the weather manufacture with proper storage and r imal agitation. Proper co .' ions above. storage includes inside or covered, •r•ve 35° F(3° C),and out of direct sunlight.Outside storage f. ort intervals is acceptable. Limitat s• Applying a test strip to determine dry to no- pickup • e when the humidity is higher than 65%. Conditions for Applica '• : Cone whenev- ecessary. All surfaces must be cle. ,dry and free from oil,grease, antifreeze, •Do not heat pa in striping system above 110°F. loose sand, aggregate •nd chipping/peeling existing striping.Any • Do not apply wh- temperatures are below 50 F. curing compound ed on new concrete must be mechanically • Do not apply when is forecast. abraded off pri• o striping.When striping on freshly sealed • Do not apply when to •eratures are near or below the surfaces use •. tion as some sealers can affect the curing and dew point or rain is fore t within 1 hour. adhesion • raffic paint.When in doubt,always test adhesion. For • Do not thin more than 5% water and then use compl: drying and minimum dirt retention when striping immediately. par ' . lots,the lots should be closed to traffic for two hours • Do not apply if temperature is e . -cted to fall below imum after painting. New asphalt and concrete should be freezing for 6 hours after applicati. a lowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of our knowledge,true and accurate,but all recommendations are made without warranty,expressed or implied.Because the conditions of use are beyond our control.neither Ennis-Flint nor its agents shall be liable for any injury,loss or damage,direct or consequential,arising from the use or the inability to use the product descibed herein.As Ennis-Flint has neither control over the installation of #f-4* product described herein nor control of the environmental factors the installed markings are subjected to,there is no guarantee as to the durability or the retroreflective properties of any marking system applied.No person is authorized to make any statement orrecommendation not contained in the Product Data,and any such statement or recommendation,if made,shall not bind the Corporation.Further,nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents,and no license under the tclaims of any patent is either implied or granted. ENNIS-FLINT The Mark of Traffic Safety. 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2018 Ennis-Flint.,Inc All Rights Reserved Potters Highway Safety Marking Spheres with Coating SAFETY DATA SHEET CTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXT 'E A = OF THE COMPANY/UNDERTAKING 1.1 Produc - -ntifier Product Name Highway Safety Marking Spheres wit, oating Standard Highway Safety Marking ' •heres with Coating Premium Highway Safety Marki• • Spheres with Coating VISIBEAD®Highway Safety . king Spheres with Coating VISIBEAD®Plus II Highw. afety Marking Spheres with Coating •remix Highway Saf- Marking CAS No. :. t97-17-3 EINECS No. 26..'.0 1.2 Relevant identified uses of the substance mixture and uses advised against Identified use(s) Road s. y kings 1.3 Details of the supplier of the safe •ata sheet Company Identification '.tters Industries LLC P. O. Box 841 Valley Forge, PA 19482 USA Telephone +1 610-651-4700 E-Mail (competent person sds.uk@pqcorp.com 1.4 Emergency tele• one number Emergency Phon- ;o. Potters Industries LLC+1 610-651-4200 ChemTrec(800)424-9300 SECT 4 N 2: HAZARDS IDENTIFICATION 2. assification of the substance or mixture 'S Classification Not classified as dangerous for supply/use. EC Classification Not classified as dangerous for supply/use. Hazards summary Dust may cause irritation. Spilled material is slippery. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) %W/W CAS No. EINECS No. / EC Classification and REACH Registration Risk Phrases Glass oxide; Glass >99 65997-17-3 2660460 Not applicable. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart,for at least 15 minutes. If symptoms persist, obtain medical attention. Skin Contact Wash affected skin with plenty of water. If symptoms occur obtain medical attention. Inhalation In case of accident by inhalation: remove casualty to fresh air and keep at rest. If symptoms develop, obtain medical attention. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 1 of 4 V. Potter Highway Safety Marking Spheres with Coating Ingestion Do not induce vomiting. If symptoms develop,obtain medical attention. 4.2 Most important symptoms Dust may cause irritation. Spilled material is slippery. Dust may and effects,both acute and cause discomfort and mild irritation. delayed SECTION 5: FIRE-FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media As appropriate for surrounding fire. Unsuitable extinguishing Media None known. 5.2 Special hazards arising from Spilled material can make floors slippery. the substance or mixture SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, Wear suitable protective clothing. Wear eye/face protection. protective equipment and emergency procedures 6.2 Environmental precautions Not applicable. 6.3 Methods and materials for Caution-spillages may be slippery.Avoid generation of dust. containment and cleaning up Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal. 6.4 Reference to other sections Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling Avoid contact with eyes, skin and clothing.Avoid generation of dust. Wash thoroughly after handling. Wear protective equipment to comply with good occupational hygiene practice. Do not eat, drink or smoke at the work place. 7.2 Conditions for safe storage, Keep container tightly closed and dry. including any incompatibilities 7.3 Specific end use(s) Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters SUBSTANCE. Occupational Exposure Limits Glass oxide;Glass No Occupational Exposure Limit assigned. 15mg/m3 total dust 5mg/m3 respirable (Particulates Not Otherwise Regulated) 8.2 Exposure controls 8.2.1 Appropriate engineering Engineering methods to prevent or control exposure are controls preferred. Methods include process or personnel enclosure, mechanical ventilation(dilution and local exhaust), and control of process conditions. 8.2.2 Personal Protection Respiratory protection Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded. Eye/face protection Safety spectacles Skin protection Wear suitable protective clothing and gloves. For example cotton or rubber. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue :08/2011 -en- Page: 2 of 4 w \: K ,otters Highway Safety Marking Spheres with Coating SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance Glass Powder.White. Odour Odourless. Odour Threshold (ppm) Not applicable. pH (Value) Not applicable. Freezing Point(°C) Not applicable. Melting Point(°C) Approx 730 C Boiling Point(°C) Not applicable. Flash Point(°C)[Closed cup] Not applicable. Evaporation rate Not applicable. Flammability(solid,gas) Non-combustible. Vapour Pressure(mm Hg) Not applicable. Vapour Density(Air=1) Not applicable. Solubility(Water) Insoluble. Partition Coefficient Not applicable. Auto Ignition Point (°C) Not applicable. Decomposition Temperature(°C) Not applicable. Viscosity(mPa.s) Not applicable. Explosive properties Not applicable. Oxidising Properties Not applicable. 9.2 Other information Not available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Avoid contact with strong acids 10.2 Chemical stability Stable. 10.3 Possibility of hazardous Not applicable. reactions 10.4 Conditions to avoid Not applicable. 10.5 Incompatible materials None known. 10.6 Hazardous decomposition None known. product(s) SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity Ingestion The acute oral toxicity of this product has not been tested.A similar material was nontoxic to rats at 5,000 mg/kg. Inhalation No data. May cause irritation to the respiratory system. Skin Contact Dust may cause mechanical irritation. Eye Contact Dust may cause mechanical irritation. Sensitisation Not sensitising. Carcinogenicity There are no known reports of carcinogenicity of nonfibrous glass. Reproductive toxicity No evidence of reproductive effects. SECTION 12: ECOLOGICAL INFORMATION 12.1 Toxicity No environmental hazards have been reported or known. 12.2 Persistence and This material is persistent but inert in aquatic systems. It will not degradability bioconcentrate up the food chain. 12.5 Results of PBT and vPvB Not classified as PBT or vPvB. assessment Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 3 of 4 I k 0tt0r Highway Safety Marking Spheres with Coating 12.6 Other adverse effects Not applicable SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should be in accordance with local,state or national legislation. SECTION 14: TRANSPORT INFORMATION 14.2 Proper Shipping Name NOT CLASSED AS DANGEROUS FOR TRANSPORT. SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture TSCA Inventory Status: Reported/Included. AICS Inventory Status: Reported/Included. DSL/NDSL Inventory Status: Reported/Included. WHMIS Classification Not classified. German Water Hazard Classification VwVwS:WGK class 1 (low hazard to water). HMIS:0,0,0 SECTION 16: OTHER INFORMATION This SDS was last reviewed: 08/2014 The following sections contain revisions or new statements:All sections. EC Classification No. 67/548/EEC Not classified as dangerous for supply/use. GHS Classification Not classified as dangerous for supply/use. Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise)is excluded except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or damage(other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. Revision: v1 Ref: 0440002 Date of Issue :08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page:4 of 4 1. ' , " Ilk 1117.0 Washington State Department of Transportation Request for Approval of Material Contract Number FA Number N/A SR Duvall Ave NE Date 8/20/21 CAG 20-065 Section/Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor Stripe Rite, Inc This form shall be completed prior to submittal.If this form Is not compete at time of submittal It may For umrwIT Use Only be returned for Information that was omitted. RAM* 005 PE Use Bid Item Material or Name and Location of Fabricator, Specification PE/QPL Hdqtr./QPL HQ Use No, Productfrype Manufacturer or Pit Number Reference Cade Code A88-A89 Solvent paint Ennis Flint 9-34.2(4) 3101 Salem,OR +' A88-A89 WB paint Ennis Flint 9-34.2(5) 3101 Salem, OR A88-A89 reflective Potters Inc 9-34.4 3101,11 glass bead Canby, OR Rmject En eerlp entative Date9/041 Z State Materials Englneer/Representative Date - Ac 'tance Actio Codes for use by Project Engineer and State Materials Laboratory 1. ccept ce Cri ens: cceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated Into proje ()Acceptance Criteria: Mfg.Cert.of Compliance for'Acceptance'prior to use of material. 0 Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material.Catalog Cut Approved ®Yes ❑No 4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment'.'WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7,. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. C Source Approved: Visual Acceptance 9. Approval Withheld: Submit samples for preliminary evaluation. 10. Approval Withheld: 0 Miscellaneous Acceptance Criteria. Surface drop Glass beads shall be "Utah Blend" with a Remarks Methacrylate compatible coupling agent approved by the (PE): material manufacturer, per Special Provision 9-34.4 Remarks (HQ): DOT Form 350-071 Project Engineer Distribution Revised 03/2021 0 Contractor El Region Operations Engineer El Fabrication Inspection El Region Materials El State Materials Lab-MS 47365 Washington State Department of Transportation Request for Approval of Material Contract Number FA Number SR Date N/A Duvall Ave NE 8/20/21 CAG 20-065 Section/Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor Stripe Rite, Inc This form shall be completed prior to submittal.If this form is not compete at time of submittal It may For wcnnT Use Only be returned for Information that was omitted. RAM# 005 PE Use Bid Item Material or Name and Location of Fabricator, Specification PEIQPL Hdqtr./QPL HQ Use No. Product/Type Manufacturer or Pit Number Reference Code Code A88-A89 Solvent paint Ennis Flint 9-34.2(4) 3101 Salem, OR A88-A89 WB paint Ennis Flint 9-34.2(5) 3101 Salem, OR A88-A89 reflective Potters Inc 9-34.4 3101 glass bead Canby, OR Project Engineer/Representative Date State Materials Engineer/Representative Date Acceptance Action Codes for use by Project Engineer and State Materials Laboratory 1. Acceptance Criteria: Acceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated into project. 0 Acceptance Criteria: Mfg.Cert.of Compliance for'Acceptance'prior to use of material. 3. Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material.Catalog Cut Approved ❑Yes ❑No 4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment','WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. O Source Approved: Visual Acceptance 9. Approval Withheld: Submit samples for preliminary evaluation. 10. Approval Withheld: 11. Miscellaneous Acceptance Criteria. Remarks (PE): Remarks (HQ): DOT Form 350-071 Project Engineer Distribution Revised 03/2021 �A1 Contractor ❑Region Operations Engineer ❑Fabrication Inspection ❑Region Materials ❑State Materials Lab.MS 47365 EF Series Fast Dry Low VOC Solvent Based Traffic Paint PRODUCT DATA Product Type: Fast Dry Low VOC Solvent Based Product Code: 985691 985697 Product Color: White Lead Free Yellow Description: SB WHT 150 VOC HWVW1 SB LF YEL 150 VOC HWVY3 Specification: WA DOT 9.34.2(4) Effective Date: October 31,2016 Product Description: A user friendly,fast drying, low voc solvent based traffic paint Physical Characteristics: suitable for application by airless or air atomized equipment. May be used to stripe roadways,airports and parking lots with or %Total weight solids: 65% minimum without pressure applied glass beads. It offers all of the benefits of a low VOC solvent based paint,and quickly dries to a no track %Total Pigment solids: 53% maximum condition. This product meets WA DOT Specification 9-34.2(4)for %Viscosity in Krebs Units: 75-85 Low VOC Solvent based Traffic Paint. Weight per gallon: 11.8 lbs./gal min Product Advantages: Contrast ratio 5 wet mils: 0.92 minimum • Below 150 VOC—use year round Reflectance/white: 80 minimum • Product reduces and cleans up with acetone Reflectance/yellow: 50 minimum • Performs equally well on both asphalt and concrete Titanium Dioxide in white: 1 lb. minimum • Paint demonstrates excellent bead retention • Keeps traffic control to a minimum when striping Titanium Dioxide in yellow: 0.2 lbs. minimum • Can be used for symbols, legends and lane marking Dry Time: Without drop on glass beads,this paint dries Packaging: to a lab ASTM D711 no pickup in less than 10 minutes @ g g: 15 mils when ambient and surface temperature are 77°F This paint is available in 5 gallon pails,55 gallon drums and 275 at 50±5%humidity.When glass beads are applied at a gallon totes.Other packaging available on request. rate of at least 6 pounds per gallon to a 15 mil wet line,the field applied paint will dry to an ASTM D713 no-track in Storage: less than 1 minute when applied at the weather conditions Shelf life of the unopened product is one year from date of above. manufacture with proper storage and minimal agitation.Proper storage includes inside or covered,above 35°F(3°C),and out of Limitations: Applying a test strip to determine dry to direct sunlight.Outside storage for short intervals is acceptable. no-pickup time when the humidity is higher than 65%. Cone whenever necessary. Conditions for Application: •Do not heat paint in striping system above 60 C. All surfaces must be clean,dry and free from oil,grease, • Do not apply when temperatures are below 3 C. antifreeze,loose sand,aggregate and chipping/peeling existing • Do not apply when rain is forecast. striping.Any curing compounds used on new concrete must be • Do not apply when temperatures are near or below the mechanically abraded off prior to striping.When striping on freshly dew point or rain is forecast within 1 hour. sealed surfaces use caution as some sealers can affect the curing • Do not thin more than 5%with acetone,and then use and adhesion of traffic paint.When in doubt,always test adhesion. immediately. For complete drying and minimum dirt retention when striping parking lots,the lots should be closed to traffic for two hours minimum after painting.New asphalt and concrete should be allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of our IoaMedge,true and emirate,but an recaanendations are made without aertemy,expressed or implied.Because the conditions of use are beyond our control,neither Ennis- Flint ran its agents span be table for any injury,loss a damage,direct or consequential,edeng fran the use or the inability to use the product described herein.As EndaFtrt has neither cored over the installation of product described herein nor control of the emlraenente ferias the installed maddngs are subjected to,there is no guarantee as to the durability or the retaellective amortise of any marling system applied.No pawn is autanzed to make any statement or rec n mendaton not contained in the Product Data,and any such statement or recanmendation,if made,shall not hind the Capaahnn.Further,nothing contained herein drat be condoned as a recommendation to use any product in conflict with existing patents,and no license under the darns of any ENN/S-FLINT patent a either implied a granted. -rthw� •h 'h�ur 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2013 Ennis-Flint. All Rights Reserved � Washington State if Department of Transportation Qualified Product List Product Information Manufacturer : Ennis-Flint, Inc., Salem - OR Product Name : Morline: White I.D. No. 985691/HWVW1 and Yellow I.D. No. 985697/HWVY3 Standard Spec : 9-34.2(4), Pavement Marking - Low VOC Solvent Based Paint Product Description : Permanent pavement marking paint: Low VOC solvent based; Sprayed application. Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Aug 1, 2019 Contractors with WSDOT Click here for Contractor Product Info Page Copyright WSDOT© 2016 Fast Dry Waterborne Traffic Paint *v.. PRODUCT DATA Product Type: Standard Fast Dry Waterborne Product Code: 983711 983712 Product Color: White(37925) Lead Free Yellow(33538) Fed 595E Color STD Description: WB WHT OR FAST DRY ORW21M4 WB YEL OR FAST DRY ORY21M1 Specification: Meets WA DOT 9-34 Effective Date: Jan. 22,2019 Product Description: Physical Characteristics: A 100%acrylic polymer latex binder, high solids,fast drying waterborne traffic paint suitable for application by airless or air % 0 atomized equipment. May be used to stripe roadways, airports Total solids/weight: 75/o minimum and parking lots with or without pressure applied glass beads.It %Total Solids/volume: 68% minimum offers all of the benefits of a water reducible paint, and quickly Weight% Pigment Solids: 68% maximum dries to a no track condition. This paint meets WA DOT specification 9-34. Viscosity in Krebs Units: 80-95 White Reflectance(Y value) 88 minimum Product Advantages: Yellow Reflectance(Y value) 50 minimum • Non-flammable and below 150 VOC Hiding at 15 mils wet, white: 0.98 minimum • Product reduces and cleans up with water • Performs equally well on both asphalt and concrete Hiding at 15 mils wet, yellow 0.96 • Paint demonstrates excellent bead retention VOC in grams per liter: 150 maximum • Keeps traffic control to a minimum when striping Weight per gallon: 13.7-14.3 • Can be used for symbols, legends and lane marking Dry Time: Without drop on glass beads, this paint dries Packaging: to a lab ASTM D711 no pickup in less than 10 minutes @ This paint is available in 5 gallon pails, 55 gallon drums and 275 15 mils when ambient and surface temperature are 77° F gallon totes.Other packaging available on request. at 50±5%humidity.When glass beads are applied at a rate of at least 6 pounds per gallon to a 15 mil wet line, Storage: the field applied paint will dry to an ASTM D713 no-track Shelf life of the unopened product is one year from date of in less than 2 minutes when applied at the weather manufacture with proper storage and minimal agitation. Proper conditions above. storage includes inside or covered,above 35° F(3°C), and out of direct sunlight.Outside storage for short intervals is acceptable. Limitations: Applying a test strip to determine dry to no- pickup time when the humidity is higher than 65%. Conditions for Application: Cone whenever necessary. All surfaces must be clean, dry and free from oil,grease, antifreeze, •Do not heat paint in striping system above 110°F. loose sand, aggregate and chipping/peeling existing striping.Any - Do not apply when temperatures are below 50 F. curing compounds used on new concrete must be mechanically • Do not apply when rain is forecast. abraded off prior to striping.When striping on freshly sealed • Do not apply when temperatures are near or below the surfaces use caution as some sealers can affect the curing and dew point or rain is forecast within 1 hour. adhesion of traffic paint.When in doubt,always test adhesion. For • Do not thin more than 5%with water and then use complete drying and minimum dirt retention when striping immediately. parking lots,the lots should be closed to traffic for two hours • Do not apply if temperature is expected to fall below minimum after painting. New asphalt and concrete should be freezing for 6 hours after application. allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: 1 gallon yields 320 feet of 4"stripe @ 15 mils;400 feet of 4"stripe @ 12 mils. The product data offered herein is,to the best of our knowledge,true and accurate,but all recommendations are made without warranty,expressed or implied.Because the conditions of use are beyond our control,neither Ennis-Flint nor its agents shall be liable for any injury,loss or damage,direct or consequential,arising from the -411* use or the inability to use the product described herein.As Ennis-Flint has neither control over the installation of product described herein nor control of the environmental factors the installed markings are subjected to,there is no guarantee as to the durability or the retmreflective properties of any marking system applied.No person is authorized to make any statement or recommendation not contained the Product Data,and any such statement or recommendation,if made,shall not bind the Corporation.Further,nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents,and no license under the claims of any patent is either implied or granted. ENNIS"FLINT The Mark of?rafhc Safety` 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2018 Ennis-Flint.,Inc All Rights Reserved „�7 Washington State WI Department of Transportation Qualified Product List Product Information Manufacturer : Ennis-Flint, Inc., Salem - OR Product Name : White I.D. No. 983711; Yellow I.D. No. 983712 Standard Spec : 9-34.2(5), Pavement Marking - Low VOC Waterborne Paint Product Description : Permanent pavement marking paint: Low VOC, Waterborne; sprayed application Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Sep 26, 2018 Contractors with WSDOT Click here for Contractor Product Info Page Copyright WSDOT© 2016 ((- Potters Highway Safety Marking Spheres with Coating SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Product Name Highway Safety Marking Spheres with Coating Standard Highway Safety Marking Spheres with Coating Premium Highway Safety Marking Spheres with Coating VISIBEAD®Highway Safety Marking Spheres with Coating VISIBEAD®Plus II Highway Safety Marking Spheres with Coating Premix Highway Safety Marking CAS No. 65997-17-3 EINECS No. 2660460 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use(s) Road safety markings 1.3 Details of the supplier of the safety data sheet Company Identification Potters Industries LLC P. O. Box 841 Valley Forge, PA 19482 USA Telephone +1 610-651-4700 E-Mail (competent person) sds.uk@pgcorp.com 1.4 Emergency telephone number Emergency Phone No. Potters Industries LLC+1 610-651-4200 ChemTrec(800)424-9300 SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture GHS Classification Not classified as dangerous for supply/use. EC Classification Not classified as dangerous for supply/use. Hazards summary Dust may cause irritation. Spilled material is slippery. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) %W/W CAS No. EINECS No./ EC Classification and REACH Registration Risk Phrases Glass oxide;Glass >99 65997-17-3 2660460 Not applicable. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart,for at least 15 minutes. If symptoms persist, obtain medical attention. Skin Contact Wash affected skin with plenty of water. If symptoms occur obtain medical attention. Inhalation In case of accident by inhalation: remove casualty to fresh air and keep at rest. If symptoms develop, obtain medical attention. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 1 of 4 Potters Highway Safety Marking Spheres with Coating Ingestion Do not induce vomiting. If symptoms develop, obtain medical attention. 4.2 Most important symptoms Dust may cause irritation. Spilled material is slippery. Dust may and effects, both acute and cause discomfort and mild irritation. delayed SECTION 5: FIRE-FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media As appropriate for surrounding fire. Unsuitable extinguishing Media None known. 5.2 Special hazards arising from Spilled material can make floors slippery. the substance or mixture SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, Wear suitable protective clothing. Wear eye/face protection. protective equipment and emergency procedures 6.2 Environmental precautions Not applicable. 6.3 Methods and materials for Caution-spillages may be slippery. Avoid generation of dust. containment and cleaning up Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal. 6.4 Reference to other sections Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling Avoid contact with eyes, skin and clothing. Avoid generation of dust. Wash thoroughly after handling. Wear protective equipment to comply with good occupational hygiene practice. Do not eat, drink or smoke at the work place. 7.2 Conditions for safe storage, Keep container tightly closed and dry. including any incompatibilities 7.3 Specific end use(s) Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters SUBSTANCE. Occupational Exposure Limits Glass oxide; Glass No Occupational Exposure Limit assigned. 15mg/m3 total dust 5mg/m3 respirable (Particulates Not Otherwise Regulated) 8.2 Exposure controls 8.2.1 Appropriate engineering Engineering methods to prevent or control exposure are controls preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process conditions. 8.2.2 Personal Protection Respiratory protection Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded. Eye/face protection Safety spectacles Skin protection Wear suitable protective clothing and gloves. For example cotton or rubber. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 2 of 4 Potters Highway Safety Marking Spheres with Coating SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance Glass Powder.White. Odour Odourless. Odour Threshold (ppm) Not applicable. pH (Value) Not applicable. Freezing Point(°C) Not applicable. Melting Point(°C) Approx 730 C Boiling Point(°C) Not applicable. Flash Point(°C) [Closed cup] Not applicable. Evaporation rate Not applicable. Flammability(solid, gas) Non-combustible. Vapour Pressure (mm Hg) Not applicable. Vapour Density(Air=1) Not applicable. Solubility(Water) Insoluble. Partition Coefficient Not applicable. Auto Ignition Point (°C) Not applicable. Decomposition Temperature (°C) Not applicable. Viscosity(mPa. s) Not applicable. Explosive properties Not applicable. Oxidising Properties Not applicable. 9.2 Other information Not available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Avoid contact with strong acids 10.2 Chemical stability Stable. 10.3 Possibility of hazardous Not applicable. reactions 10.4 Conditions to avoid Not applicable. 10.5 Incompatible materials None known. 10.6 Hazardous decomposition None known. product(s) SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity Ingestion The acute oral toxicity of this product has not been tested. A similar material was nontoxic to rats at 5,000 mg/kg. Inhalation No data. May cause irritation to the respiratory system. Skin Contact Dust may cause mechanical irritation. Eye Contact Dust may cause mechanical irritation. Sensitisation Not sensitising. Carcinogenicity There are no known reports of carcinogenicity of nonfibrous glass. Reproductive toxicity No evidence of reproductive effects. SECTION 12: ECOLOGICAL INFORMATION 12.1 Toxicity No environmental hazards have been reported or known. 12.2 Persistence and This material is persistent but inert in aquatic systems. It will not degradability bioconcentrate up the food chain. 12.5 Results of PBT and vPvB Not classified as PBT or vPvB. assessment Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 3 of 4 \ ( - Potters Highway Safety Marking Spheres with Coating 12.6 Other adverse effects Not applicable SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should be in accordance with local, state or national legislation. SECTION 14: TRANSPORT INFORMATION 14.2 Proper Shipping Name NOT CLASSED AS DANGEROUS FOR TRANSPORT. SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture TSCA Inventory Status: Reported/Included. AICS Inventory Status: Reported/Included. DSL/NDSL Inventory Status: Reported/Included. WHMIS Classification Not classified. German Water Hazard Classification VwVwS:WGK class 1 (low hazard to water). HMIS: 0,0,0 SECTION 16: OTHER INFORMATION This SDS was last reviewed: 08/2014 The following sections contain revisions or new statements:All sections. EC Classification No. 67/548/EEC Not classified as dangerous for supply/use. GHS Classification Not classified as dangerous for supply/use. Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise)is excluded except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or damage(other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page:4 of 4 Aft Waisbington State i?�partment of Ti3ransportatioa Qualified Product List Product Information Manufacturer : Potters Industries, Inc., Canby - OR Product Name : Glass Beads for Pavement Marking Standard Spec : 9-34.4, Pavement Marking - Glass Beads Product Description : Glass beads: Exterior coating(s) as required for the type of pavement marking being used (Reapproved 5-10-11) Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Mar 19, 2013 Contractors with WSDOT Click here for Contractor Product Info Page Copyright WSDOT© 2016