Loading...
HomeMy WebLinkAboutCAG-20-065 - Duvall - A93 - Plastic Bicycle Lane Symbol Wash on e iir �I/ Department of Transportation Request for Approval of Material Contract Number FA Number N/A SR Duvall Ave NE Date 8/20/21 CAG 20-065 Section(Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor Stripe Rite, Inc This form shall be completed prior to submittal. If this form is not compete at time of submittal it may For WSDOT Use Only be returned for information that was omitted. RAM# 006A PE Use Bid item Material or Name and Location of Fabricator, Specification PE/QPL Hdgtr,/OPL HQ Use No. Product/Type Manufacturer or Pit Number Reference Code Code , A90-A94 Plastic Ennis Flint 9-34.3(1) 8 3101 Type A Bakersfield, CA A90 A94 reflective Potters Inc 9-34.4 10 glass bead Canby, OR Project Engineer/Representative. Date State Materials Engineer/Representative Date �Ch _ 9/15/2021 Acceptance Action Codes for use by Project Engineer and State Materials Laboratory 1. Acceptance Criteria: Acceptance based upon"Satisfactory"Test Report for samples of materials to be incorporated into project. 2. Acceptance Criteria: Mfg.Cert.of Compliance for'Acceptance'prior to use of material. 3. Acceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material. Catalog Cut Approved D Yes ❑No 4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment', 'WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. OSource Approved: Visual Inspection 9. Approval Withheld: Submit samples for preliminary evaluation. 10 Approval Withheld: Glass beads for Thermoplastic shall be 3M 50150 Wet/Dry elements Miscellaneous Acceptance Criteria. per Special Provisions 8-22.3. Remarks (PE): Remarks (HQ): DOT Form 350-071 Project Engineer Distribution Revised 03/2021 ®Contractor DRegion Operations Engineer ❑Fabrication Inspection 0 Region Materials El State Materals Lab-MS 47365 EF Series PAVEMARK® Thermoplastic PRODUCT DATA Product Type: Alkyd Extrude Thermoplastic Product Code: 885560 885575 Product Color: White Lead Free Yellow Description: TM WHTALK HI EXTRD TM LF YEL ALK HI EXTRD Specification: Meets HI 755.05 and AASHTO M-249 Effective Date: September 2,2016 Product Description: Physical Characteristics: Ennis-Flint's Alkyd Extrude Thermoplastic Pavement Marking Material is a 100%solids material blend of binder,pigments and glass beads that must be melted to a temperature of at least 425'F % Binder 18%minimum (218'C),mixed well and applied in a molten/liquid state to the % Glass: 30-40% pavement.Roadway surface temperature at the time of application Intermix glass spec: M-247 type should be 50'F(10'C)and rising.Upon cooling to normal pavement temperature,thermoplastic provides a very durable %TiO2 in the white: 10%minimum marking material for low and high volume traffic areas. % Fillers in white: 42%maximum % Fillers in yellow: 48%maximum Product Advantages: 595E color,white: 17886 • Non-flammable and below 150 VOC 595E color,yellow: 13538 • Demonstrates excellent bead retention and abrasion resistance • Fast set up keeps traffic control to a minimum when striping White Reflectance (Y value): 75 minimum • Can be used for symbols,legends and lane marking Yellow Reflectance(Y value): 45 minimum • A low cost per useful life durable form of delineation Minimum Impact Resistance: 10 inch pounds Packaging: Softening Point: 200-230°F Thermoplastic is sold in one ton increments(2000 pounds). The Yellowness index,white: 0.15 maximum ton is divided into 40 heat degradable bags each weighing approximately 50 pounds. Dry Time: With drop on glass beads applied,the Storage: thermoplastic material shall be sufficiently tack-free to The shelf life of the product is one year from date of manufacture carry traffic in not more than 2 minutes when pavement with proper storage.Proper storage includes inside or covered to surface temperature is at 50'F,and not more than 10 prevent from moisture,and below 120F. Outside storage for short minutes when pavement surface temperature is 130°F. intervals is acceptable as long as the material is kept dry. The older the material,more agitation and dwell time is required to fully Limitations: Applying a test strip to determine if melt and mix the granular ingredients. surface is dry enough if there has been rain in the last 24 hours. Conditions for Application: • Do not apply if hot material shows moisture bubbles. All surfaces must be clean,dry and free from oil,grease, • Do not heat thermoplastic above 450°F. antifreeze,loose sand,aggregate and chipping/peeling existing • Do not apply when road and ambient temperatures striping.Any curing compounds used on new concrete must be are below 50°F. mechanically abraded off prior to striping and use of a primer is • Do not apply when temperatures are near or below strongly suggested. Concrete should be allowed to cure 14 days. the dew point. When in doubt,always test adhesion.While thermoplastic may be • Material at application is hot—please wear personal installed behind the paver once the mat cools,new asphalt should protective equipment as described in MSDS be allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: One tons yields approximately 6000 feet of 4"stripe @ 90 mils— The past data offered heron te.to the bast d at kroelelge,tits and accurate,bu al rear nme chat®are surface texture will decrease the yield. made ut ter,expressed or nod Because the caasdne d use are beyond cur control.neither Erns:- Flirt nor Its agents Mae be fable be aty irryry.lows or damage,deed a cortadahenhat Word fresh the use a the 'natality to use the product described herein.As EmsFMt has nether coned ore the installation d product described heat nor camel d the avewmereat fades the unsalted melange are subieded to there a no primrose as t°the arrant*a the raaaefleofe properbee d any marking system apoled.No person ie adlalaed to make troy datanet a r000oreddeat na axeained to the ProdJd Oath,and any such statement a f�+ reccnvnendatho it made,shag not rind the Capdration.Father,ndnird a>nained herein shall be corotrued as a ardor.siukon to the any product in mrtlid aiel westing patent and no doctee urder the dams d any patent ENNIS-FLI I ether mp iada granted. A Traffic Safetyboh,tsons Company 800.331.8118 sales@ennisflint.com www.ennisflint.com ©2013 Ennis-Flint. All Rights Reserved Washington State September 15,2021 Qualified Product List Contractor Product Information Contractor: Contract No: Sub Contractor: it Date: Bid Item: Manufacturer: Ennis-Flint, Inc. - Bakersfield, CA Product Name: Pave-Mark Alkyd Standard Spec : 9-34.3(1), Pavement Marking - Plastic Type A: Liquid Hot Applied Thermoplastic Product Description : Pavement marking - extruded application: long line, transverse and symbols (statewide); long line with profile (Western WA only) Product Restriction : Place material according to the manufacture's recommendations. A manufacturer's technical representative shall be present at the initial installation of plastic material to approve the installation procedure or the material manufacturer shall certify that the Contractor will install the plastic material in accordance with their recommended procedure. Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Apr 14, 2018 To be completed by the field inspector: Quantity: Verified By: Date: Potters Highway Safety Marking Spheres with Coating SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Product Name Highway Safety Marking Spheres with Coating Standard Highway Safety Marking Spheres with Coating Premium Highway Safety Marking Spheres with Coating VISIBEAD®Highway Safety Marking Spheres with Coating VISIBEAD®Plus II Highway Safety Marking Spheres with Coating Premix Highway Safety Marking CAS No. 65997-17-3 EINECS No. 2660460 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use(s) Road safety markings 1.3 Details of the supplier of the safety data sheet Company Identification Potters Industries LLC P. O. Box 841 Valley Forge, PA 19482 USA Telephone +1 610-651-4700 E-Mail(competent person) sds.uk@pgcorp.com 1.4 Emergency telephone number Emergency Phone No. Potters Industries LLC+1 610-651-4200 ChemTrec(800)424-9300 SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture GHS Classification Not classified as dangerous for supply/use. EC Classification Not classified as dangerous for supply/use. Hazards summary Dust may cause irritation.Spilled material is slippery. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) %W/W CAS No. EINECS No. / EC Classification and REACH Registration Risk Phrases Glass oxide;Glass >99 65997-17-3 2660460 Not applicable. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart,for at least 15 minutes. If symptoms persist,obtain medical attention. Skin Contact Wash affected skin with plenty of water. If symptoms occur obtain medical attention. Inhalation In case of accident by inhalation: remove casualty to fresh air and keep at rest. If symptoms develop, obtain medical attention. Revision: v1 Ref:0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue: 08/2011 -en- Page: 1 of 4 • Potters Highway Safety Marking Spheres with Coating Ingestion Do not induce vomiting. If symptoms develop,obtain medical attention. 4.2 Most important symptoms Dust may cause irritation.Spilled material is slippery. Dust may and effects, both acute and cause discomfort and mild irritation. delayed SECTION 5: FIRE-FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media As appropriate for surrounding fire. Unsuitable extinguishing Media None known. 5.2 Special hazards arising from Spilled material can make floors slippery. the substance or mixture SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, Wear suitable protective clothing. Wear eye/face protection. protective equipment and emergency procedures 6.2 Environmental precautions Not applicable. 6.3 Methods and materials for Caution-spillages may be slippery.Avoid generation of dust. containment and cleaning up Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal. 6.4 Reference to other sections Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling Avoid contact with eyes,skin and clothing.Avoid generation of dust. Wash thoroughly after handling. Wear protective equipment to comply with good occupational hygiene practice. Do not eat,drink or smoke at the work place. 7.2 Conditions for safe storage, Keep container tightly closed and dry. including any incompatibilities 7.3 Specific end use(s) Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters SUBSTANCE. Occupational Exposure Limits Glass oxide; Glass No Occupational Exposure Limit assigned. 15mg/m3 total dust 5mg/m3 respirable (Particulates Not Otherwise Regulated) 8.2 Exposure controls 8.2.1 Appropriate engineering Engineering methods to prevent or control exposure are controls preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust),and control of process conditions. 8.2.2 Personal Protection Respiratory protection Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded. Eye/face protection Safety spectacles Skin protection Wear suitable protective clothing and gloves. For example cotton or rubber. Revision: v1 Ref:0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue:08/2011 -en- Page: 2 of 4 .. • Potters Highway Safety Marking Spheres with Coating SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance Glass Powder.White. Odour Odourless. Odour Threshold(ppm) Not applicable. pH(Value) Not applicable. Freezing Point(°C) Not applicable. Melting Point(°C) Approx 730 C Boiling Point(°C) Not applicable. Flash Point(°C)[Closed cup] Not applicable. Evaporation rate Not applicable. Flammability(solid, gas) Non-combustible. Vapour Pressure(mm Hg) Not applicable. Vapour Density(Air=1) Not applicable. Solubility(Water) Insoluble. Partition Coefficient Not applicable. Auto Ignition Point (°C) Not applicable. Decomposition Temperature(CC) Not applicable. Viscosity(mPa. s) Not applicable. Explosive properties Not applicable. Oxidising Properties Not applicable. 9.2 Other information Not available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Avoid contact with strong acids 10.2 Chemical stability Stable. 10.3 Possibility of hazardous Not applicable. reactions 10.4 Conditions to avoid Not applicable. 10.5 Incompatible materials None known. 10.6 Hazardous decomposition None known. product(s) SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity Ingestion The acute oral toxicity of this product has not been tested. A similar material was nontoxic to rats at 5,000 mg/kg. Inhalation No data. May cause irritation to the respiratory system. Skin Contact Dust may cause mechanical irritation. Eye Contact Dust may cause mechanical irritation. Sensitisation Not sensitising. Carcinogenicity There are no known reports of carcinogenicity of nonfibrous glass. Reproductive toxicity No evidence of reproductive effects. SECTION 12: ECOLOGICAL INFORMATION 12.1 Toxicity No environmental hazards have been reported or known. 12.2 Persistence and This material is persistent but inert in aquatic systems. It will not degradability bioconcentrate up the food chain. 12.5 Results of PBT and vPvB Not classified as PBT or vPvB. assessment Revision: v1 Ref:0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue:08/2011 -en- Page: 3 of 4 Potters Highway Safety Marking Spheres with Coating 12.6 Other adverse effects Not applicable SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should be in accordance with local,state or national legislation. SECTION 14: TRANSPORT INFORMATION 14.2 Proper Shipping Name NOT CLASSED AS DANGEROUS FOR TRANSPORT. SECTION 15: REGULATORY INFORMATION 15.1 Safety,health and environmental regulations/legislation specific for the substance or mixture TSCA Inventory Status: Reported/Included. AICS Inventory Status: Reported/Included. DSUNDSL Inventory Status: Reported/Included. WHMIS Classification Not classified. German Water Hazard Classification VwVwS:WGK class 1 (low hazard to water). HMIS:0,0,0 SECTION 16: OTHER INFORMATION This SDS was last reviewed: 08/2014 The following sections contain revisions or new statements:All sections. EC Classification No.67/548/EEC Not classified as dangerous for supply/use. GHS Classification Not classified as dangerous for supply/use. Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition(statutory or otherwise)is excluded except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or damage(other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. Revision: v1 Ref:0440002 Date of Issue: 08/2014 Potters LLC-GHS-3 Date Previous Issue:08/2011 -en- Page:4 of 4 VimWashington State Department Tr atsportatio Re uest for A royal of Material Contract Number FA Number NSA SR Duvall Ave NE Date CAG 20-065 8/20/21 Section/Title of Project Duvall Ave NE County King Contractor Reed Trucking & Excavating, Inc. Subcontractor Stripe Rite, Inc This form shall be completed prior to submittal. If this form is not compete at time of submittal it may For WSDOT Use Only be returned for information that was omitted. RAM# 006 PE Use Bid Item Material or Name and Locator of Fabricator, Specification PEIQPL Hdgtr./QPL HQ Use No. Product/Type Manufacturer or Pit Number Reference Code Code A90-A94 Plastic Ennis Flint 9-34.3(1) 3101 Type A Bakersfield, CA A90-A94 reflective Potters Inc 9-34.4 3101 ,11 glass bead Canby, OR Project E ineedRe entative Date State Materials Engineer/Representative Date / A e tance Action Codes for use y P oject Engineer and State Materials Laboratory 1. Acceptance Criteria: Ac tance based upon"Satisfactory"Test Report for samples of materials to be incorporated into project. 2. Acceptance Criteria: Mfg. Cert.of Compliance for'Acceptance'prior to use of material. OAcceptance Criteria: Catalog Cuts for'Acceptance'prior to use of material. Catalog Cut Approved ®Yes ❑No 4. Acceptance Criteria: Submit Shop Drawings for'Approval'prior to fabrication of material. 5. Acceptance Criteria: Only'Approved for Shipment', 'WSDOT Inspected'or'Fabrication Approved Decal'material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. 8. Source Approved: 9. Approval Withheld: Submit samples for preliminary evaluation. 10. Approval Withheld: 11. Miscellaneous Acceptance Criteria. Surface drop Glass beads shall be "Utah Blend" with a Remarks Methacrylate compatible coupling agent approved by (PE): the material manufacturer, per Special Provision 9-34.4 Remarks (HQ): DOT Form 350-071 Project Engineer Distribution Revised 03/2021 ®Contractor ❑Region Operations Engineer ❑Fabrication Inspection ❑Region Materials ❑State Matedela Lab-MS 47365 EF Series PAVEMARK® Thermoplastic PRODUCT DATA Product Type: Alkyd Extrude Thermoplastic Product Code: 885560 885575 Product Color: White Lead Free Yellow Description: TM WHT ALK HI EXTRD TM LF YEL ALK HI EXTRD Specification: Meets HI 755.05 and AASHTO M-249 Effective Date: September 2, 2016 Product Description: Physical Characteristics: Ennis-Flint's Alkyd Extrude Thermoplastic Pavement Marking Material is a 100%solids material blend of binder,pigments and glass beads that must be melted to a temperature of at least 425°F % Binder 18% minimum (218°C), mixed well and applied in a molten/liquid state to the % Glass: 30-40% pavement. Roadway surface temperature at the time of application Intermix glass spec: M-247 type should be 50°F(10°C)and rising.Upon cooling to normal pavement temperature,thermoplastic provides a very durable %TiO2 in the white: 10%minimum marking material for low and high volume traffic areas. % Fillers in white: 42% maximum Fillers in yellow: 48% maximum Product Advantages: 595E color,white: 17886 • Non-flammable and below 150 VOC 595B color,yellow: 13538 • Demonstrates excellent bead retention and abrasion resistance • Fast set up keeps traffic control to a minimum when striping White Reflectance(Y value): 75 minimum • Can be used for symbols,legends and lane marking Yellow Reflectance(Y value): 45 minimum • A low cost per useful life durable form of delineation Minimum Impact Resistance: 10 inch pounds Packaging: Softening Point: 200-230°F Thermoplastic is sold in one ton increments(2000 pounds). The Yellowness index,white: 0.15 maximum ton is divided into 40 heat degradable bags each weighing approximately 50 pounds. Dry Time: With drop on glass beads applied,the Storage: thermoplastic material shall be sufficiently tack-free to The shelf life of the product is one year from date of manufacture carry traffic in not more than 2 minutes when pavement with proper storage.Proper storage includes inside or covered to surface temperature is at 50'F,and not more than 10 prevent from moisture,and below 120F.Outside storage for short minutes when pavement surface temperature is 130°F. intervals is acceptable as long as the material is kept dry. The older the material,more agitation and dwell time is required to fully Limitations: Applying a test strip to determine if melt and mix the granular ingredients. surface is dry enough if there has been rain in the last 24 hours. Conditions for Application: • Do not apply if hot material shows moisture bubbles. All surfaces must be clean,dry and free from oil,grease, • Do not heat thermoplastic above 450°F. antifreeze, loose sand,aggregate and chipping/peeling existing • Do not apply when road and ambient temperatures striping.Any curing compounds used on new concrete must be are below 50°F. mechanically abraded off prior to striping and use of a primer is • Do not apply when temperatures are near or below strongly suggested. Concrete should be allowed to cure 14 days. the dew point. When in doubt,always test adhesion.While thermoplastic may be • Material at application is hot—please wear personal installed behind the paver once the mat cools,new asphalt should protective equipment as described in MSDS be allowed to cure for a minimum of 14 days to maximize adhesion and durability. Coverage: One tons yields approximately 6000 feet of 4"stripe @ 90 mils The product data offered herein Is,to the best d o,knowledge,true and accuete,but al reCeromeldatons are surface texture will decrease the yield. made without warranty,expressed or'ivied.Because the con:bons d use are beyond cur control,nether Enns -114 Fint nor its agents shall be liable fa any injury,loss or damage,dreg or consequential,arising from the use or the ireblliry to use the product described heron.As Enns-Flint has nether coned au the installation of product described heron nor control d the eairometa factors the installed markings are subjeded to,there Is no guarantee as to the durability or the retroAledrve enbo des of any malarg system applied. No person is authorized to make any statenert or recommendation not contained in the Product Data,and any such statement a reconmatdaton,if made,shall not end the Ccrporabor.Further,mthirg cotened herein shall be construed as a recommendation to use any product in candid with existing patents,and no hoarse under the darns d any patent ENNIS—FLINT so he imgiederg aced. A Traffic Safety Solutions Company 800.331.8118 sales(@ennisflint.com www.ennisflint.com ©2013 Ennis-Flint. All Rights Reserved I� Washington State Mr Department of Transportation Qualified Product List Product Information Manufacturer : Ennis-Flint, Inc., Bakersfield - CA Product Name : Pave-Mark Alkyd Standard Spec : 9-34.3(1), Pavement Marking - Plastic Type A: Liquid Hot Applied Thermoplastic Product Description : Pavement marking - extruded application: long line, transverse and symbols (statewide); long line with profile (Western WA only) Product Restriction : Place material according to the manufacture's recommendations. A manufacturer's technical representative shall be present at the initial installation of plastic material to approve the installation procedure or the material manufacturer shall certify that the Contractor will install the plastic material in accordance with their recommended procedure. Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Apr 14, 2018 Contractors with WSDOT Click here for Contractor Product Info Page Copyright WSDOT© 2016 Highway Safety Marking Spheres with Coating SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Product Name Highway Safety Marking Spheres with Coating Standard Highway Safety Marking Spheres with Coating Premium Highway Safety Marking Spheres with Coating VISIBEAD®Highway Safety Marking Spheres with Coating VISIBEAD®Plus II Highway Safety Marking Spheres with Coating Premix Highway Safety Marking CAS No. 65997-17-3 EINECS No. 2660460 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified use(s) Road safety markings 1.3 Details of the supplier of the safety data sheet Company Identification Potters Industries LLC P. O. Box 841 Valley Forge, PA 19482 USA Telephone +1 610-651-4700 E-Mail (competent person) sds.uk@pqcorp.com 1.4 Emergency telephone number Emergency Phone No. Potters Industries LLC+1 610-651-4200 ChemTrec(800)424-9300 SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture GHS Classification Not classified as dangerous for supply/use. EC Classification Not classified as dangerous for supply/use. Hazards summary Dust may cause irritation. Spilled material is slippery. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) %W/W CAS No. EINECS No./ EC Classification and REACH Registration Risk Phrases Glass oxide; Glass j>99 65997-17-3 2660460 Not applicable. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 15 minutes. If symptoms persist, obtain medical attention. Skin Contact Wash affected skin with plenty of water. If symptoms occur obtain medical attention. Inhalation In case of accident by inhalation: remove casualty to fresh air and keep at rest. If symptoms develop, obtain medical attention. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 1 of 4 Potters Highway Safety Marking Spheres with Coating Ingestion Do not induce vomiting. If symptoms develop, obtain medical attention. 4.2 Most important symptoms Dust may cause irritation. Spilled material is slippery. Dust may and effects, both acute and cause discomfort and mild irritation. delayed SECTION 5: FIRE-FIGHTING MEASURES 5.1 Extinguishing media Suitable Extinguishing Media As appropriate for surrounding fire. Unsuitable extinguishing Media None known. 5.2 Special hazards arising from Spilled material can make floors slippery. the substance or mixture SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, Wear suitable protective clothing. Wear eye/face protection. protective equipment and emergency procedures 6.2 Environmental precautions Not applicable. 6.3 Methods and materials for Caution-spillages may be slippery. Avoid generation of dust. containment and cleaning up Sweep or preferably vacuum up and collect in suitable containers for recovery or disposal. 6.4 Reference to other sections Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling Avoid contact with eyes, skin and clothing. Avoid generation of dust. Wash thoroughly after handling. Wear protective equipment to comply with good occupational hygiene practice. Do not eat, drink or smoke at the work place. 7.2 Conditions for safe storage, Keep container tightly closed and dry. including any incompatibilities 7.3 Specific end use(s) Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters SUBSTANCE. Occupational Exposure Limits Glass oxide; Glass No Occupational Exposure Limit assigned. 15mg/m3 total dust 5mg/m3 respirable (Particulates Not Otherwise Regulated) 8.2 Exposure controls 8.2.1 Appropriate engineering Engineering methods to prevent or control exposure are controls preferred. Methods include process or personnel enclosure, mechanical ventilation (dilution and local exhaust), and control of process conditions. 8.2.2 Personal Protection Respiratory protection Wear suitable respiratory protective equipment if working in confined spaces with inadequate ventilation or where there is any risk of the exposure limits being exceeded. Eye/face protection Safety spectacles Skin protection Wear suitable protective clothing and gloves. For example cotton or rubber. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 2 of 4 --Potters Highway Safety Marking Spheres with Coating SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Appearance Glass Powder.White. Odour Odourless. Odour Threshold (ppm) Not applicable. pH (Value) Not applicable. Freezing Point(°C) Not applicable. Melting Point(°C) Approx 730 C Boiling Point(°C) Not applicable. Flash Point(°C) [Closed cup] Not applicable. Evaporation rate Not applicable. Flammability(solid, gas) Non-combustible. Vapour Pressure (mm Hg) Not applicable. Vapour Density(Air=1) Not applicable. Solubility(Water) Insoluble. Partition Coefficient Not applicable. Auto Ignition Point (°C) Not applicable. Decomposition Temperature (°C) Not applicable. Viscosity(mPa. s) Not applicable. Explosive properties Not applicable. Oxidising Properties Not applicable. 9.2 Other information Not available. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity Avoid contact with strong acids 10.2 Chemical stability Stable. 10.3 Possibility of hazardous Not applicable. reactions 10.4 Conditions to avoid Not applicable. 10.5 Incompatible materials None known. 10.6 Hazardous decomposition None known. product(s) SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Acute toxicity Ingestion The acute oral toxicity of this product has not been tested.A similar material was nontoxic to rats at 5,000 mg/kg. Inhalation No data. May cause irritation to the respiratory system. Skin Contact Dust may cause mechanical irritation. Eye Contact Dust may cause mechanical irritation. Sensitisation Not sensitising. Carcinogenicity There are no known reports of carcinogenicity of nonfibrous glass. Reproductive toxicity No evidence of reproductive effects. SECTION 12: ECOLOGICAL INFORMATION 12.1 Toxicity No environmental hazards have been reported or known. 12.2 Persistence and This material is persistent but inert in aquatic systems. It will not degradability bioconcentrate up the food chain. 12.5 Results of PBT and vPvB Not classified as PBT or vPvB. assessment Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 3 of 4 Potters Highway Safety Marking Spheres with Coating 12.6 Other adverse effects Not applicable SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods The waste is considered to be non hazardous. Disposal should be in accordance with local, state or national legislation. SECTION 14: TRANSPORT INFORMATION 14.2 Proper Shipping Name NOT CLASSED AS DANGEROUS FOR TRANSPORT. SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture TSCA Inventory Status: Reported/Included. AICS Inventory Status: Reported/Included. DSL/NDSL Inventory Status: Reported/Included. WHMIS Classification Not classified. German Water Hazard Classification VwVwS: WGK class 1 (low hazard to water). HMIS: 0,0,0 SECTION 16: OTHER INFORMATION This SDS was last reviewed: 08/2014 The following sections contain revisions or new statements:All sections. EC Classification No. 67/548/EEC Not classified as dangerous for supply/use. GHS Classification Not classified as dangerous for supply/use. Information contained in this publication or as otherwise supplied to Users is believed to be accurate and is given in good faith, but it is for the Users to satisfy themselves of the suitability of the product for their own particular purpose. Potters Industries gives no warranty as to the fitness of the product for any particular purpose and any implied warranty or condition (statutory or otherwise)is excluded except to the extent that exclusion is prevented by law. Potters Industries accepts no liability for loss or damage (other than that arising from death or personal injury caused by defective product, if proved), resulting from reliance on this information. Freedom under Patents, Copyright and Designs cannot be assumed. Revision: v1 Ref: 0440002 Date of Issue : 08/2014 Potters LLC-GHS-3 Date Previous Issue : 08/2011 -en- Page: 4 of 4 Washington State T r Department of Transportation Qualified Product List Product Information Manufacturer : Potters Industries, Inc., Canby - OR Product Name : Glass Beads for Pavement Marking Standard Spec : 9-34.4, Pavement Marking - Glass Beads Product Description : Glass beads: Exterior coating(s) as required for the type of pavement marking being used (Reapproved 5-10-11) Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Mar 19, 2013 Contractors with WSDOT Click here for Contractor Product Info Page Copyright WSDOT©2016