Loading...
HomeMy WebLinkAboutAddendum 3 Page 1 1507 Belmont Avenue . Suite 200 . Seattle . Washington . 98122 . 206.323.9932 BID ADDENDUM 03 SHEET REVISION #: 002 DATE OF ADDENDUM: 05 JUNE 2025 ARCHITECT’S PROJECT NO.: 2233 PROJECT Renton Market & Piazza 233 Burnett Ave S. Renton, WA 98057 OWNER City of Renton – Public Works 1055 S. Grady Way, 5th Floor Renton, WA 98057 ARCHITECT Graham Baba Architects 1507 Belmont Avenue Suite 200 Seattle, WA 98122 Contact: Will Wheaton will@grahambaba.com 1.0 NOTICE TO ALL BIDDERS AND PLANHOLDERS This Addendum is hereby made a part of the Contract Documents pertaining to the above project and shall be binding upon each contractor submitting bids. Bid submitted shall be for the full and complete cost of incorporating these changes into the contract, no further claims shall be allowed for work associated with this addendum. It shall further be the responsibility of each Contractor to notify their sub-contractors concerning the contents of this addendum as they specifically apply to them. The following changes hereby become a part of the Contract Documents. Acknowledge receipt of this Addendum in the space provided on the Bid Proposal. Failure to do so may subject Bidder to disqualification. 2.0 BID SUBMITTAL DEADLINE The bid submittal deadline remains the same and is not changed by this Addendum. 3.0 SPECIFICATIONS Item Section No. Description of Change Not Used 4.0 DRAWINGS Item Drawing No. Description of Change 4.1 P2.00U At GI-1 Grease Interceptor, change note to: 4" S POC TO CIVIL I.E. 33'-6" 4.2 P2.00 At GI-1 Grease Interceptor, change note to: NEW 4" S POC TO CIVIL I.E. 33'-6" Page 2 1507 Belmont Avenue . Suite 200 . Seattle . Washington . 98122 . 206.323.9932 4.3 C3.13 At GI-1 Grease Interceptor, change note to: GREASE INTERCEPTOR (GI) VAULT REFER TO PLUMB PLAN. CIVIL POC 6" IE OUT: 33.5’. PIPE SIZE ADAPTER SHALL BE PROVIDED FROM 4” GI OUTLET TO 6” CIVIL PIPE. 5.0 QUESTIONS AND ANSWERS The following questions and answers are provided as a matter of information to clarify issues raised about the Contract Documents. To the extent that changes to the Contract Documents are required based on the questions received, the Contract Documents have been modified as noted above in the Specifications and Drawings sections of this Addendum. Item Questions and Answers 5.1 Date: 5/20/2025 From: PLS PLS is the local rep for Selux and Hess. We are pricing up the documents and have a few questions for the design team that would enable us to put together a more accurate bid. If possible, please advise on: Question: Fixture Types F1 and F1A (MAST POLE FIXTURES by SELUX): There are several ways to mount these fixtures to the pole. Please advise which is preferred: • Floracion Mount: https://www.selux.us/media/pages/products/olivio/olivio-floracion- grande/17e503357b-1747156050/olgl-f_ss.pdf • Sistema Arm Mount: https://www.selux.us/media/pages/products/olivio/olivio-sistema- grande/883af7c296-1734110528/olgl-s_ss.pdf • Sistema 2 Arm Mount: https://www.selux.us/media/pages/products/olivio/olivio-sistema- 1/2d9d972b02-1734110719/olgl-sb_ss.pdf Answer: Floracion Mount is correct. Sistema Arm Mount, and Sistema 2 Arm Mount are not used. Final fixture placement on each pole to be coordinated with landscape architect/lighting designer. Question: The poles are called out as 18' tall. Are these poles straight or tapered? Is there a preference on the pole base cover? Answer: The poles are the Olivio Floracion nominal 8” round strait aluminum column. The pole mounts directly to the footing per detail 12/S4.05 with no base cover. Question: Eventually, we will need to know the configuration/placement of the (5) fixture heads on each pole. We don't need to know this information for the bid, but will need to know in order to produce shop drawings for review. If this information is known now, please pass it along. Answer: Page 3 1507 Belmont Avenue . Suite 200 . Seattle . Washington . 98122 . 206.323.9932 Approximate positioning shown in attached calc file, and we used this positioning for our photometric calc. Each of the three fixtures per pole were mounted 18” apart from one another, at 15’, 16.5’ and 18’ respectively – this is rough/preliminary, and likely the top fixture will be lower than 18’ since that is the full height of the pole. The two projector heads per pole were not documented in photometrics. Hewitt will share a layout for each pole for confirming fixture positioning. Question: Fixture Type F2 (CATENARY SYSTEM by HESS): Is there a pole spec for the catenary poles? (Height, Round vs Tapered, Pole base cover, etc?) Answer: See detail 11/S4.05 for the catenary pole detail. Structural is carrying this information. 5.2 Date: 5/20/2025 From: SeaTac Lighting &Controls Question: We would like to send you our lighting controls substitution package for your project called Renton Market & Piazza. Answer: See attached reviewed substitution request. ELECTRICAL ENGINEER COMMENTS: • No exceptions taken to substitution request from an engineering perspective, but ensure lighting designer has also reviewed substitution request. • Components submitted are wireless, while basis of design calls for wired design. If wireless system is chosen, cost delta should be shared with Owner. LIGHTING DESIGNER COMMENTS: • Base design calls for a “touchscreen” to be located in an office – programming changes shall be easily performed by operator and/or lighting design team, the Cooper system must be modifiable by the operator without requiring factory support. • Sensors shall not be integrated into any of the primary fixtures visible to the public in the space. • Lights shall be turned on/off in the control zoning groups as indicated in the control intent. Whatever system is approved shall require shop drawings for approval, showing locations of control devices. 5.3 Date: 5/28/2025 From: Schuchart Question: Questions Regarding HVAC: 1) Page M8.01 detail #1 BMS Network Architecture Note #3 calls out the existing CHW, HHW, AHU controllers to be integrated into a new Building Automation System (BAS). What are these existing controllers and can as-builts be provided for these systems so the control contractor knows what they are getting into? Answer: To Arup's knowledge, as-builts are not available for the original controls installation. Based on site observation the existing controllers appear to be similar to the Delta DSC model. For the Page 4 1507 Belmont Avenue . Suite 200 . Seattle . Washington . 98122 . 206.323.9932 purposes of bid, contractor shall assume new DDC controllers will be provided. Following award, contractor shall evaluate reuse of existing controllers as a project cost savings. 5.4 Date: 5/28/2025 From: Schuchart Question: Questions Regarding Signage: • the spec for “material 1” is 3M 3650-10 (?) ..it appears to apply over opaque sections of the building - 3650-10 has a clear adhesive (creating a white back) vs. 180-10 (gray backer) which is a bit more robust - perhaps the 180-10 would be more effective? Answer: No exception taken with this approach. Question: • no spec for “material 2” which is clear vinyl for the windows - so.. 8150? Answer: Material shall be 3M™ Scotchcal™ Clear View Graphic Film IJ8150 Question: • composition of the building cladding is not specified- it looks like horizontal wood planking but the photos I can see have a sheen - does that mean plastic/metal? Answer: Existing building cladding is metal. Elevations call out HPC-03 at existing metal cladding. Reference specification section 099600 for High Performance Coatings to be applied prior to Environmental Graphics. Question: • for prints on clear “Material 2” - will they be transparent from inside or do they need white behind the imagery? (this will read stronger from the exterior) Answer: Intent is to read the same color from both sides. Question: • there are a few places where “material 1” and “material 2” continue the same image. – this will result in a different look. Answer: This is a known design intent. Question: Cladding seems to be “lap” siding with channels between the planks – we assume each edge will be trimmed - not tucking the vinyl into the channel? apparently verified by the detail on pg. 5. (see attached for visuals). Answer: For durability and longevity, the exterior vinyl on cladding should be “tucked” into the gaps of the cladding. Our recommendation for installation is: install vinyl as one sheet, trim down the center in large gaps of cladding and fold excess onto visible lips of cladding. See attached “Vinyl Application Diagram” for application of vinyl onto existing metal cladding. 5.5 Date: 5/22/2025 From: Neeley Construction Question: Will the city accept an AIA 310 bid bond in lieu of the one in the bid documents? Answer: No. The Proposal Bid Bond FORM A included in the specifications shall be used. 5.6 Date: 5/29/2025 Page 5 1507 Belmont Avenue . Suite 200 . Seattle . Washington . 98122 . 206.323.9932 From: NCES Concrete Cutting and Drilling Question: I came across this today and am putting some numbers together for the GC’s that are bidding. Is this a certified payroll project, and will there be DBE requirements for this project? Answer: Yes. 6.0 INFORMATION The following item(s) are provided as a matter of information only to all bidders and plan holders and do not modify or become part of the Contract Documents. Item Description Not Used 7.0 ATTACHMENTS The following item(s) are provided as a matter of information only to all bidders and plan holders and do not modify or become part of the Contract Documents. Item Description Size No. of Pages 7.1 BID ADDENDUM 03 8.5” x 11” 5 7.2 Vinyl Application Diagram 8.5” x 11” 1 7.3 Substitution Request forms 8.5” x 11” • Lighting Controls 65 TOTAL 71 END OF ADDENDUM 01 Vinyl Application Diagram Date: May 20, 2025 Sea-Tac Lighting & Controls, LLC 15455 53rd Ave S Tukwila WA 98188 Phone: (206) 575-6865 Fax: Job Name Renton Market and Piazza SEATAC-WWA25-207407 Renton WA Bid Date May 20, 2025 Submittal Date May 20, 2025 Date: May 20, 2025 Page 1/1 Transmittal Sea-Tac Lighting & Controls, LLC 15455 53rd Ave S Tukwila WA 98188 Phone: (206) 575-6865 From: Lee Goggins FF00009 Page 1/1www.seataclighting.com Project Renton Market and Piazza Quote#SEATAC-WWA25-207407 Location Renton WA Contact: ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM: X Drawings X Specifications Other: Prints X Information Plans X Submittals THESE ARE TRANSMITTED FOR: X Prior Approval Resubmittal for Approval Record Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment Type MFG Part MISC MISC SUBSTITUTION REQUEST FORM FUNCTIONAL DEVICES, INC LR21F600 Greengate CWPD-1500 Greengate ESP-P-010-347 Greengate RSP-P-010-347 Greengate TRX-BACNET Greengate TRX-TCPRO2 Greengate W2L-RL-W Greengate WAC2-POE Greengate WAH-C-POE-ID Greengate TSE57-WLX-B Greengate WTA Greengate WWB3-RL-W Greengate WWB5-RL-W Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: SUBSTITUTION REQUEST FORM Notes: Type: MISC SEATAC-WWA25-207407 SUBSTITUTION CSI Form 1.5C REQUEST (During the Bid Period) Substitution Request Number: Project: From: Date: To: A/E Project Number: Contract For: Re: © Copyright 2007, Construction Specifications Institute, 110 South Union Street, Suite 100, Alexandria, VA 22314 Page 1 Form Version: June 2004 CSI Form 1.5C This is not an official CSI Construction Contract Administration (CCA) Form. Please use CSI's official CCA Forms if required by your project needs. Specification Title: Description: Section: Page: Article/Paragraph: Proposed Substitution: Manufacturer: Address: Phone: Trade Name: Model No.: Attached data includes product description, specifications, drawings, photographs, and performance and test data adequate for evaluation of the request; applicable portions of the data are clearly identified. Attached data also includes a description of changes to the Contract Documents that the proposed substitution will require for its proper installation. The Undersigned certifies: • Proposed substitution has been fully investigated and determined to be equal or superior in all respects to specified product. • Same warranty will be furnished for proposed substitution as for specified product. • Same maintenance service and source of replacement parts, as applicable, is available. • Proposed substitution will have no adverse effect on other trades and will not affect or delay progress schedule. • Proposed substitution does not affect dimensions and functional clearances. • Payment will be made for changes to building design, including A/E design, detailing, and construction costs caused by the substitution. Submitted by: Signed by: Firm: Address: Telephone: A/E’s REVIEW AND ACTION Substitution approved - Make submittals in accordance with Specification Section 01 25 00 Substitution Procedures. Substitution approved as noted - Make submittals in accordance with Specification Section 01 25 00 Substitution Procedures. Substitution rejected - Use specified materials. Substitution Request received too late - Use specified materials. Signed by: Date: Supporting Data Attached: Drawings Product Data Samples Tests Reports 1 Penn Herrin Electrical Lighting Controls 26.00.00 All All Please see attached document 15455 53rd Ave South, Tukwila, WA 98188 SeaTac Lighting & Controls (206) 575-6865 Penn Herrin Graham Baba Architects Arup 2233 05/20/2025 SeaTac Lighting & Controls Controls Substitutions Renton Market & Piazza Index Page1/1Submitted On: May 20, 2025 x 5/30/2025 Arup Comments: - No exceptions taken to substitution request from an engineering perspective, but ensure lighting designer has also reviewed substitution request. - Components submitted are wireless, while basis of design calls for wired design. If wireless system is chosen, cost delta should be shared with Owner. Erin Richmond 5/30/2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: LR21F600 Notes: Type: SEATAC-WWA25-207407 0-10V CONTROLLED PHASE ANGLE DIMMER Operating Temperature: Humidity Range: Red LED: Dimensions: Origin: Wires: Approvals: Housing Rating:Max Lighting Load: Min Lighting Load: Dim to off: Selectable Dimming Mode: Selectable Low Dim Threshold: Power Input Ratings: -30 to 122 F 5 to 95% (noncondensing) Power Status 4.00”H x 4.00”W x 1.81”D with 0.50” NPT hub Made of US and non-US parts 16”, 600V rated Class 2 UL Listed, UL916, C-UL, RoHS UL Accepted, NEMA 1 600W @ 120Vac, 1300W @ 277Vac, Incandescent/Halogen Recommended 50% derating for other dimmable lighting loads 1W Yes Yes Yes 10mA @ 120-277 Vac; 60Hz LR21F600 Phase Angle Dimmer, 0-10 Vdc Input, 120-277 Vac Power Input, 600W @ 120 Vac, 1300W @ 277 Vac Rated, Dimming Mode Selectable, NEMA 1 Housing 2024.06.12 SPECIFICATIONS PATENT PENDING TYPICAL APPLICATION Functional Devices, Inc. 101 Commerce Drive Sharpsville, IN 46068 www.functionaldevices.com sales@functionaldevices.com Office: (765) 883-5538 Fax: (765) 883-7505 Toll Free: (800) 888-5538 Blk120-277 Vac Wht Neutral or other phase Prp Dim Signal (+) Control Circuit Pnk Dim Signal (-) Red Dimmed Hot .20” 0.2” .20” .20” .20” 4.00” .44” .56” .44” .56” 2.00” 1.81” 1.00” 4.00” Notes: Switch on unit will change dimming between leading or trailing edge. Requires power cycle. Purple & pink wires are used with both Current Sink 0-10V controllers and Current Source 0-10V controllers. The LR21F600 will automatically detect the controller type. “Low Dim Threshold” set with push button during operation. Pressing and holding the button for one second will log the present 0-10V value and turn off the load when 0-10V signal drops below that value. To reset “Low Dim Threshold”, short together or send 0V to Purple & Pink. Then press and hold the button for 1 second. The above method will set the “Low Dim Threshold” to the minimum value. However, factory default “Low Dim Threshold” is set slightly above this mark. Some lighting fixtures flicker at very low values. For use with 60Hz only. Not for use with Magnetic Low Voltage(MLV) loads. Phase DimmableLighting LoadBlack White Red LR21F600 Purple Pink H N + - 0-10V DimmingController 120-277VacPower Index Page1/1Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: CWPD-1500 Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503096EN page 1 July 2024 Interactive Menu • Order Information page 2 • Additional Resources page 3 • Connected Systems page 5 • Product Warranty Typical Applications Office • Education • Healthcare • Hospitality • Retail Industrial • Manufacturing WaveLinx PRO Ceiling Sensor (CWPD-1500) Wireless Battery-Powered Passive Infrared (PIR) Occupancy Sensor with Photocell for daylight control, 1500 sqft coverage, Ceiling Mount. Product Certification Battery Powered Part 15/ECES-003 IEEE 802.15.4 Device Security Customer Security Occupancy Sensor Daylighting Control • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Product Features Compatibility Overview The PRO Ceiling Occupancy Sensor, CWPD-1500, is a wireless passive infrared (PIR) occupancy sensor with 1500 sqft wide coverage. The device also incorporates a photocell with a range of 1000 Lux. The PRO Ceiling Occupancy Sensor has three tasks: 1) Keeping the lights ON while the room is occupied, 2) Saving energy by keeping the lights OFF while the room is unoccupied, and 3) Saving energy by dimming the lights when the space is adequately lit by natural light, and the room is occupied. Product Features & Benefits • Passive Infrared (PIR) sensor with 1500 sqft coverage – Enables flexible placement of sensor within a space • Daylight sensor with up to 1000 lux range – Increase energy savings by dimming the lights when the space is adequately lit by natural light • Software configurable settings – Adjust the sensor settings (time delay, sensitivity, others) remotely using WaveLinx mobile and web applications • Battery powered with up to 7 years battery life – Eliminates the need to pull additional wire, making installation quick and easy • Three tool-less mounting options (magnetic, surface and electrical box) – Increase labour savings with fast, simple installation and with the ability to reposition the sensor with additional wiring or noticeable markets *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Mobile App PROWaveLinx Index Page1/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: CWPD-1500 Notes: Type: SEATAC-WWA25-207407 PRO Ceiling Sensor PS503096EN page 2 July 2024 Order Information The WaveLinx PRO ceiling sensor is an accessory to the WaveLinx connected lighting (WCL) system and requires a WaveLinx Area Controller (WAC) for full functionality. The wireless ceiling sensor is used to detect occupancy in spaces and can be mapped to other sensors in an area for maximum coverage and control. The wireless ceiling sensor is typically used to control spaces controlled by switchpacks, areas where WaveLinx PRO fixtures are used, or WaveLinx integrated sensors do not provide adequate coverage. Catalog Number Catalog #Description CWPD-1500 WaveLinx PRO Ceiling Sensor (1500 sq ft) Required Accessories All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC2) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector Product Specifications Mechanical Size: Base Diameter: 3.1” (80mm), Height: 1.6” (41mm) Environment: • Operating temperature: +32° - 104° F (0° - 40° C) Standard Range (SR) and Long Range (LR) • Storage temperature: -40°F to 158°F (-40°C to 70°C) • Relative humidity operating: 0% to 95% non-condensing • For indoor use only Mounting: Ceiling Mounting Height: 8 - 12ft (2 - 4m) Color: White Housing: UV stabilized plastic Light Sensor Detector Shields: 0 to 1,000 Lux • Shields included - no opening of sensor required Daylighting Installation: • Daylighting mounting distance from window: 1-2x window height • Ensure that sensor is not looking directly at artificial light • Ensure that sensor is not obstructed • Use appropriate lens masks for directionality Electrical Power supply type: Batteries • 2-AA Alkaline batteries provided • Replaceable and readily accessible • 7 Year life - occupancy only • 6 Year life - occupancy and daylighting Software Specifications • Any number of sensors can be mapped to any number of zones • Each sensor can be assigned to up to 6 open loop daylight sets • Remote configuration for Occupancy/Vacancy, Walk-test functionality without opening covers • Remote Time Delay settings fully configurable • Remote configuration of Occupancy and Unoccupied light levels Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 8dBm Range: 30ft (9m) LOS # of Walls: Range decreases by 50% through each interior wall of standard construction System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • cULus Listed - Energy Management Equipment (UL916) • RoHS Compliant • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Warranty Five year warranty standard *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page2/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: CWPD-1500 Notes: Type: SEATAC-WWA25-207407 PRO Ceiling Sensor PS503096EN page 3 July 2024 Installation * Use either the supplied thumb screw or helical screw to secure the mounting plate to the ceiling tile Slightly rotate the main sensor assembly until it snaps in with the mounting plate Dimensional Details Mounting Height WaveLinx 8' [2.4m] 12' [3.7m]1.0” [25mm] 3.4” [86mm] WaveLinx Ceiling Sensor Index Page3/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: CWPD-1500 Notes: Type: SEATAC-WWA25-207407 PRO Ceiling Sensor PS503096EN page 4 July 2024 Field of View 09ft [2.7m] 11ft [3.4m] 11ft [3.4m] 15ft [4.6m] 15ft [4.6m] 20ft [6m] 20ft [6m] 8ft [2.4m] 20ft [6m] 10ft [3m] 20ft [6m] 10ft [3m] TOP VIEW: SIDE VIEW:Extended Range 0 CL CL 5.6ft [1.7m] 3ft [0.9m] 9ft [2.7m] 5.6ft [1.7m] 3ft [0.9m] Note: The "beam" pattern obtained depends strongly on the detector used with this array. The pattern shown is intended solely as a general guide and is not to scale. WaveLinx Index Page4/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: CWPD-1500 Notes: Type: SEATAC-WWA25-207407 PRO Ceiling Sensor PS503096EN page 5 July 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page5/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: ESP-P-010-347 Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS50368524 page 1 April 2025 Overview The PRO Emergency Switchpack (ESP-P-010-347) is a 120/277/347 VAC powered device with a 20A relay and one continous 0-10V dimming output used to control LED and non LED luminaires as well a plug load. The PRO Emergency Switchpack is powered by the 120/277/347VAC (+/- 10% Single Phase) circuit it is controlling and provides simple 1/2” knockout mounting. The relay is used to turn on/off the fixtures powered by the circuit while the 0-10V output is used to raise and lower the light levels of the luminaires equipped with 0-10V drivers. The emergency switchpack provides the ability to provide wireless control without the need for any additional emergency hardware. The ESP-P-010-347 provides Wireless Emergency capabilities by integration through the WaveLinx PRO Mobile App. Assignment of the Normal Power Sensing (NPS) devices is done through the mobile app. Use in conjunction with any WaveLinx PRO NPS rated device to provide Emergency capabilities without additional wiring or devices. The PRO Dimming Switchpack communicates with other Pro devices over the WaveLinx IEEE 802.15.4 wireless mesh network. Note: A 20A circuit breaker is required in the AC power source circuit where Wavelinx PRO RSP is connected to provide line protection. Product Features & Benefits • Emergency device provides the capability to wirelessly meet UL924 code Output control loads up to 20 amps or 1.5 HP and 0-10V dimming control • Plenum rated design with easy junction box mounting • Universal voltage input (120-347 +/-10% Single Phase) • Fails safe to 100% if communications are lost Interactive Menu • Order Information page 2 • Additional Resources page 3 • Wiring Diagrams page 3 • Connected Systems page 4 • Product Warranty Typical Applications Office • Education • Healthcare • Hospitality • Retail Industrial • Manufacturing WaveLinx PRO Emergency Switchpack (ESP-P-010-347) 120/277/347 VAC Wireless Emergency Switchpack with 20A Relay and one 0-10V Dimming Ouput Product Certification* Product Features Part 15/ICES-003 IEEE 802.15.4 Device Security Customer Security Receptacle Control *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Compatibility WaveLinx Mobile App PRO WaveLinx Index Page1/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: ESP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PS50368524 page 2 April 2025 PRO Emergency Switchpack Product Specifications Mechanical Size: 1.7”H x 2.6”W x 6.1”L (43mm x 66mm x 155mm) Environment: • Operating temperature: 32°F to 104°F (0°C to 40°C) • Storage temperature: 32°F to 158°F (0°C to 70°C) • Relative humidity operating: 10% to 90% RH (non-condensing) • For indoor use only Mounting: Mounts to the side of a 4” (102mm) square box via ½” (13mm) knockout Color: Matte White Housing: Medium impact injection molded housing. ABS resin with 5VA flame rating. Plenum rated for external junction box mounting with Teflon coated leads. Electrical Power: • 120/277/347VAC (+/- 10%) 50/60Hz (Single Phase) Output Information: • 20amp 120/277/347VAC General Purpose (Single Phase) • 16amp 120/277/347VAC electronic ballast (LED load) (Single Phase) • Single class 2 0-10V dimming output (IEC 60929 Annex E) sinks up to 120mA per (40 μA max per circuit leakage to line) • 0-10V output supports up to 60 ballasts/drivers that source up to 2mA each Out-of-the-Box Operation: • Once power is applied, the Emergency Switchpack output will go to ON/100% and remain in Emergency Mode. • •The Emergency Switchpack LED turns ON when the output is ON. Emergency Provisioning To ensure proper Emergency Mode operation: • The Emergency Switchpack must be powered from an emergency lighting circuit and be connected to emergency lighting fixture(s). Fixtures may be ON/OFF or dimmable via 0-10V connection. • The Emergency Switchpack must be provisioned to a zone within a Networked Area • At least one normal power sensing (NPS) device must be provisioned to a zone belonging to the same Networked Area. The NPS device must be connected to a normal power circuit. Up to three NPS devices may be assigned to trigger EM Mode if desired (allows for three phase monitoring if one NPS device is connected to a normal circuit from each electrical phase). Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 10dBm Range: 150ft (46m) LOS typical 50ft (15m) through standard walls when mounted outside junction box # of Walls: 2 interior walls standard construction System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • cULus Listed - Emergency Lighting and Power Equipment (UL924) • cULus Listed - Energy Management Equipment (UL916) • FCC part 15 Sub Part B • Manufactured in an ISO 9001 certified factory • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Warranty Five year warranty standard Order Information The PRO Emergency Switchpack is an integral part of the WaveLinx system. It communicates with the WaveLinx Area Controller and other PRO devices. The PRO Switchpack is used to control luminaires and plug loads. Catalog Number Catalog Number Description ESP-P-010-347 Wireless Emergency Switchpack - 20 amp Note Replaces WSP-UV-010 and WSP-MV-010 Required Accessories All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page2/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: ESP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PS50368524 page 3 April 2025 PRO Emergency Switchpack Mounting Black (Incoming Hot) White (Neutral)Red (Load Out)Purple (0-10V +) Pink (0-10V -)0-10V continuous dimming luminaires 20amp circuit from circuit breaker * Black (Incoming Hot)White (Neutral)Red (Load Out) Purple (0-10V +) Pink (0-10V -) To 20amp split receptacle 20amp circuit from circuit breaker White (Neutral)Switchleg White (Neutral)Switchleg Purple (0-10V +) Gray (0-10V -) 20amp split receptacle Continuous Powered 20amp circuit Controlled Switchleg Neutral Junction Box Junction Box Wireless Relay Switchpackwith 0-10V Control(ESP-P-010-347) Wireless Relay Switchpackwith 0-10V Control(ESP-P-010-347) Wiring example RSP Relay Switchpack RSP Relay Switchpack RSP Relay Switchpack Normal Power Panel RSP Relay Switchpack Generator or Inverter Transfer Switch Emergency Panel Normal Power ESP Emergency Switchpack Dimensional Details 1/2-14 NPT 5.0"[127mm]0.8"[20mm] 1.7"[43mm] 1/2-14 NPT 5.0"[127mm]0.8"[20mm] 2.6"[64.77mm] WaveLinx Index Page3/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: ESP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PS50368524 page 4 April 2025 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2025 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PRO Emergency Switchpack View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page4/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: RSP-P-010-347 Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS50307822 page 1 January 2023 Top Product Features • Output control loads up to 20 amps or 1.5 HP and 0-10V dimming control • Plenum rated design with easy junction box mounting • Universal voltage input (120-347 +/-10% Single Phase) • Fails safe to 70% if communications are lost Interactive Menu • Order Information page 2 • Additional Resources page 3 • Wiring Diagrams page 4 • Connected Systems page 5 • Product Warranty Dimensional Details Typical Applications Office • Education • Healthcare • Hospitality • Retail Industrial • Manufacturing WaveLinx Pro PRO Switchpack 20A relay switchpack with 0-10V control 1/2-14 NPT 5.0"[127mm]0.8"[20mm] 1.7"[43mm] 1/2-14 NPT 5.0"[127mm]0.8"[20mm] 2.6"[64.77mm] Product Certification Product Features • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements • Manufactured in an ISO 9001 certified factory Part 15/ICES-003 IEEE 802.15.4 Device Security Customer Security Receptacle Control Index Page1/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: RSP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PRO Switchpack PS50307822 page 2 January 2023 Product Specifications Key Features • Output control for the following • 0-10V continuous dimmable luminaries • LED loads up to 20A • Receptacle loads up to 20A • Motor loads to 1.5 HP • Plenum rated design with easy junction box mounting • Device identification LED • Universal voltage input (120V-347V) • Designed with safety in mind, at loss of communications with WaveLinx Area Controller, the wireless relay switchpack will turn ON and set dimmer to 70% light level Mechanical Size: 1.7”H x 2.6”W x 6.1”L (43mm x 66mm x 155mm) Environment: • Operating temperature: 32°F to 104°F (0°C to 40°C) • Storage temperature: 32°F to 158°F (0°C to 70°C) • Relative humidity operating: 10% to 90% RH (non-condensing) • For indoor use only Mounting: Mounts to the side of a 4” (102mm) square box via ½” (13mm) knockout Color: Matte White Housing: Medium impact injection molded housing. ABS resin with 5VA flame rating. Plenum rated for external junction box mounting with Teflon coated leads. Electrical Power: • 120-347VAC (+/- 10%) 50/60Hz (Single Phase) Output Information: • 20amp 120-347VAC General Purpose (Single Phase) • 20amp 120-347VAC electronic ballast (LED load) (Single Phase) • Single class 2 0-10V dimming output (IEC 60929 Annex E) sinks up to 120mA per (40 μA max per circuit leakage to line) • 0-10V output supports up to 60 ballasts/drivers that source up to 2mA each Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 10dBm Range: 150ft (46m) LOS typical 50ft (15m) through standard walls when mounted outside junction box # of Walls: 2 interior walls standard construction System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings • cULus Listed - Energy Management Equipment (UL916) • UL924 / C22.2 No. 141 Listed (-EM model only) • FCC part 15 Sub Part B • Manufactured in an ISO 9001 certified factory • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Warranty Five year warranty standard Order Information The PRO switchpack is an integral part of the WaveLinx system. It communicates with the WaveLinx Area Controller and other PRO devices. The PRO Switchpack is used to control luminaires and plug loads. Catalog Number Catalog Number Description RSP-P-010-347 Wireless Universal Voltage Dimming Switchpack - 20 amp Note Replaces WSP-UV-010 and WSP-MV-010 Required Accessories All WaveLinx Pro Devices require to be communicating with a WaveLinx Area Controller (WAC2). Ensure the bill of material includes the necessary number of WaveLinx Area Controller (refer to the WaveLinx Design Guide). Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector WaveLinx Pro Index Page2/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: RSP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PRO Switchpack PS50307822 page 3 January 2023 System Architecture This diagram shows the main components of the WaveLinx Pro connected lighting (WCL) system. The WCL system communicates using wireless mesh technology based on the 802.15.4 standard. A POE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building wireless network. System setup is achieved through a simple mobile application via wireless communication to the system. Area or Room(49 + 1 construction area) Area or Room (49 + 1 construction area) Wi-Fi Signal IEEE 802.15.4 KEY Building LAN WaveLinx PROTouchscreen PoEPower Trellix CoreBACnet/IPPublic (REST) API Third Party system (hardware provided by others)BACnet Router1 (hardware provided by others) Desktop/Laptopwith web browser (hardware provided by user) Note:Performance based on second generation WaveLinx PRO Wireless Area Controller (WAC2) Trellix Core Pro shown in this illustration. Trellix Core hardware can be either Pro, Enterprise or Virtual. 1 BACnet Router only required if Trellix Core and third party BACnet client are on different subnets. Area or Room (49 + 1 construction area) WaveLinx PRO Mobile Appused for system setup and personal control Integrated Ambient Room Based Occupancy Sensor WaveLinx PRO wireless controlled devices (up to 200 devices per WAC2 - 150 devices best practice) - see Note Controlled Receptacle Scene Wallstation120-347V 20A Dimming Switchpacks Integrated Outdoor WaveLinx PROWireless AreaController Overview The WaveLinx Pro Universal Voltage Dimming Switchpack with 0-10V (RSP-P-010-347) control is an integral part of the WaveLinx Pro connected lighting (WCL) system and offers 120-347VAC (+/- 10% Single Phase) 20amp control and continuous 0-10V dimming control of LED and non LED loads. The relay switchpack with 0-10V control also supports 16amp plug load control. The RSP-P-010-347 is powered by the 120-347VAC (+/- 10% Single Phase) circuit it is controlling and provides simple 1/2” knockout mounting. The relay switchpack with 0-10V control operates on a wireless mesh network based on IEEE 802.15.4 standards. Note: A 20A circuit breaker is required in the AC power source circuit where Wavelinx Pro(RSP) is connected to provide line protection. WaveLinx Pro Index Page3/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: RSP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PRO Switchpack PS50307822 page 4 January 2023 Mounting Black (Incoming Hot)White (Neutral)Red (Load Out)Purple (0-10V +) Pink (0-10V -)0-10V continuous dimming luminaires 20amp circuit from circuit breaker * Black (Incoming Hot)White (Neutral)Red (Load Out) Purple (0-10V +) Pink (0-10V -) To 20amp split receptacle 20amp circuit from circuit breaker White (Neutral)Switchleg White (Neutral)Switchleg Purple (0-10V +) Gray (0-10V -) 20amp split receptacle Continuous Powered 20amp circuit Controlled Switchleg Neutral Junction Box Junction Box Wireless Relay Switchpackwith 0-10V Control(RSP-P-010-347) Wireless Relay Switchpackwith 0-10V Control(RSP-P-010-347) WaveLinx Pro Index Page4/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: RSP-P-010-347 Notes: Type: SEATAC-WWA25-207407 PS50307822 page 5 January 2023 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2023 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PRO Switchpack Better Data. Better Decisions. Trellix combined with our WaveLinx Pro connected lighting system is a distributed network of LED lighting fixtures with integrated sensing and beacon technology that captures real-time data; making your facility smarter so you can make smarter decisions. Trellix provides an open IoT platform and infrastructure that connects intelligent sensors leveraging the real-estate of the physical light fixture to solve higher complexity problems in a commercial building to deliver actionable insights through the aggregation of valuable data. 00000 API wired bus 0-10V line voltage Trellix CoreWaveLinx Controller WaveLinx Pro enabled LED Lighting Fixtures Trellix Applications data COLLECTED data CONNECTED data EXCHANGED and stored data INSIGHT Trellix Lighting Trellix Locate Trellix Insights Trellix Admin Info & Tracking Trellix Exchange 3rd party integration WaveLinx Pro gateway for smart building eco-system WaveLinx Wired on-premises enterprise management software Space / Occupancy Environment daylight people space temperaturehumidity Tracking badge asset bracelet Trellix Insights on Trellix Cloud Control Systems • Trellix • WaveLinx Pro wireless WaveLinx Pro Index Page5/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-BACNET Notes: Type: SEATAC-WWA25-207407 Product Features Project Catalog #Type Prepared by Notes Date PS50373223 page 1 January 2024 Interactive Menu • Order Information page 2 • Connected Systems page 3 • Product Warranty Typical Applications Office • Education • Healthcare • Industrial WaveLinx CORE - BACnet Interface Integrate and share lighting data with 3rd party systems and BAS using open protocol standard Overview The CORE BACnet Interface enables the integration between the WaveLinx PRO systems with any BACnet compatible Building Automation System (BAS). BACnet is a data communication protocol for Building Automation and Control Networks developed by the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE). Product Features & Benefits • No additional hardware – Hosted on the WaveLinx CORE the CORE BACnet interface does not require any additional hardware. • IP enabled – The CORE BACnet IP interface simplifies the integration with other BACnet IP enabled Building Automation Systems by leveraging the existing building IT infrastructure. • Eliminates the need for BACnet Routers – The CORE BACnet interface is hosted on the WaveLinx CORE which is an IP device. BACnet routers are typically required when the BACnet IP systems are on two different subnets. To avoid dealing with BACnet Router configuration, you can install the WaveLinx CORE on the same subnet as the BAS system and use your existing router to route the data between the wireless area controllers and the Insight Manager. • Control the lighting system – Allows other sub-systems to change the light levels for their buildings, floor areas, zones and individual devices. • More Insights using lighting data – Allows facility managers to read the value of the individual devices (occupancy sensors and daylight sensors) and individual space outputs (zone light levels, area scenes) from their BAS console. Compatibility COREAdmin COREExchange CORELightingWeb Based PROWaveLinx Index Page1/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-BACNET Notes: Type: SEATAC-WWA25-207407 CORE - BACnet Interface PS50373223 page 2 January 2024 Product Specifications Network Requirements • If managed switch is used then the IT system administrator shall ensure data exchange between the WaveLinx CORE and WaveLinx Area Controllers through the router. Please refer to the WaveLinx PRO Installation and Planning guide for more information with regards to the IT network requirements. Performance Specifications • WaveLinx CORE Pro: 10,000 BACnet objects • WaveLinx CORE Enterprise: 30,000 BACnet objects • WaveLinx CORE Virtual Enterprise: 30,000 BACnet objects Supported BACnet Objects Please refer to the CORE BACnet Protocol Implementation Conformance Statement (PICS) for more information. Warranty Five-year warranty standard Order Information The WaveLinx CORE (Pro, Enterprise, Virtual) platforms are preloaded with CORE Admin and Lighting. The WaveLinx CORE is shipped with a base software license which enables the Lighting application for up to 250 devices. After 250 devices, the customer should purchase CORE Lighting license adders. WaveLinx CORE BACnet/IP requires a dedicated software license. Customers should purchase the appropriate software license adders for any additional features. WaveLinx CORE BACnet Licenses Catalog Number Catalog Number Description TRX-BACNET WaveLinx CORE BACnet license for unlimited devices Notes1. All WaveLinx CORE platforms are shipped with a base software license which enables all the Lighting features for 250 devices except for Occupancy dashboard, API, BACnet and OpenADR.2. WaveLinx CORE Locate application is not available with the base software license. 3. For a system with more than 250 devices, the users must order software license adders for the applications and interfaces that they are planning to use. Please refer to CORE Lighting, CORE Locate, CORE BACnet, CORE Public API, CORE OpenADR datasheets to learn more about the software license catalog numbers.4. Please refer to the WaveLinx CORE datasheet to learn more about the capability of each platform, i.e. WaveLinx CORE Pro (TRX-TCPRO2), WaveLinx CORE Enterprise (TRX-TCENT2) and WaveLinx CORE Virtual Enterprise (TRX-TCVRT2). WaveLinx CORE Commissioning Services The CORE Lighting application includes graphical floor plan and energy dashboard software features. Services to configure these items MUST BE INCLUDED in WaveLinx CORE in lots of 250. Catalog Number Catalog Number Description TRX-CONFIG WaveLinx CORE Energy and Graphical Floorplan Setup Services for 250 devices* Notes1. Devices placement only available for wireless devices A device is an input/output wireless/wired device that is connected to the controller. Wireless All Wireless Devices (integrated sensors, ceiling sensors, outdoor sensors, wall stations, switch packs, receptacles, wireless drivers). Each device counts as one. Notes: WaveLinx PRO Touchscreen is not counted as a device Wired DAC & Field Relay Devices: Each device counts as one. SCMH : 12 devices (A single SCMH counts as 12 devices) SCMR : 0 devices (see below) Notes: As WaveLinx CORE does not support device level monitoring, the device count is limited to output devices only listed above, i.e. wallstations and sensors are not included in the device count. We are not counting the SCMR in the device count. Gateway Controller CORE Admin CORE Lighting CORE Locate CORE Partners Lighting Devices Storage Microservices CORE ExchangeBACnet/IP, APIs & OpenADR services WaveLinx CORE Services CORE Insights CORE Insightson Cloud Data Data Data Data WaveLinx Index Page2/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-BACNET Notes: Type: SEATAC-WWA25-207407 CORE - BACnet Interface Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PS50373223 page 3 January 2024 View WaveLinx Network and IT Guidance Technical Guide Sample System Topology: This diagram shows the main components of the WaveLinx wired and PRO wireless connected lighting system. The WaveLinx PRO wireless system communicates using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The WaveLinx wired system controls the devices using relay, 0-10V, DMX and the WaveLinx wired digital local bus. The WaveLinx wired system connects to the building LAN using the EG2 module. Each WaveLinx wired area controller communicates on the WaveLinx wired network. WaveLinx Area Controllers (WAC) and WaveLinx Ethernet Gateways (EG2) communicate with WaveLinx CORE over the Ethernet network. Please refer to the WaveLinx PRO Wireless Network and IT Guidance Technical Guide and WaveLinx Wired Network and IT Guidance Technical Guide for more information. Note:Performance based on second generation WaveLinx Area Controller (WAC2) WaveLinx AreaController Smartphone with WaveLinx app Up to 300 WaveLinxArea Controllers (WaveLinx CORE Enterprise & Virtual) Touchscreen PRO OccupancyCeiling Sensor WaveLinx PRO controlled devices(up to 200 devices per WAC2 - 150 devices best practice) - see Note Area or Room(49 + 1 construction area) PRO Controlled Receptacle PRO Wallstation WaveLinx PRO enabled Indoor Fixture Touchscreen 2-WIRE 20A Relay 2-WIRE Sensor Powerpack 2-WIRE Occupancy Ceiling Sensor Area or Room 2-WIRE Wallstation 2-WIRE, DALI-enabled, Indoor Fixture 2-WIRE Relay Controlled Fixture WaveLinxWired network WaveLinx wired local bus devices(up to 64 devices per local bus) WaveLinxWired Local Bus 120-347V 20A PRO Dimming Switchpacks WaveLinx PRO enabled Outdoor FixtureWaveLinx PRO enabled Industrial Fixtures Firewall CORE Admin CORE Lighting WaveLinx COREWorkstationwith Web Browser Smart Spaces Apps CORE Locate CORE Insights CORE Insights on the Cloud CORE Exchange Partner Apps 3rd PartySmart BuildingsApps API CORE Exchange Partner Apps Building AutomationSystem BACnet / IP CORE WaveLinx wired AND wireless WaveLinx wired WaveLinx PRO wireless Wa v e L i n x C O R E Connects to WaveLinx CORE (Pro, Enterprise, Virtual) # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Pro 2 / 3000 20 / 3000 # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Enterprise 10 / 32,500*300 / 32,500* # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Virtual Enterprise 10 / 32,500*300 / 32,500* Connecting device EG2-S-NA WAC2-POE CO R E L i g h t i n g Alarms  Events  Operate (floorplan control) Operate - area control  Operate - zone control  Operate - device control  Scheduling  Energy Dashboard  Occupancy Dashboard  CO R E E x c h a n g e BACnet/IP  10,000 objects with WaveLinx CORE Proup to 30,000 with Enterprise/Virtual Public (REST) API  OpenADR  Demand Response  CO R E A d m i n Manage Users  Manage roles  Manage clients  Manage licenses  System settings (backup/restore, network etc) CO R E I n s i g h t s Occupancy Trends and Comparison  Average Occupancy  Occupancy on Floor Plan  Generate and Export Reports to pdf  Hierarchical Navigation  Quick Search  Department Filter  Historical View  Popular Spaces  * For larger number of gateways and devices, please contact Cooper Lighting Solutions Sales representatives. Recommend designing the system at 70-80% of maximum capacity. Specifications based on WAC2-POE. The number of gateways and devices mentioned above are the total for a single system or the combination (Wired + Wireless) that can be used with a server.  = All features  = Subset of features Control Systems • WaveLinx • Greengate WaveLinx Index Page3/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-TCPRO2 Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS50373423 page 1 November 2024 Interactive Menu • Order Information page 2 • Additional Resources page 3 • Connected Systems page 4 • Product Warranty Typical Applications Office • Education • Healthcare • Industrial WaveLinx CORE Pro Hardware platform hosting CORE Applications front back IEC 62443-2 IEC 62443-2 CERTIFICATION Cybersecurity for Network Connectable Products Overview The WaveLinx CORE Pro is an on-premises hardware platform that hosts the WaveLinx Smart Spaces Platform software applications. The WaveLinx CORE Applications provide enterprise-level functionality for the Wavelinx PRO system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 20 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions. Product Features & Benefits • Manage a system with up to 20 WaveLinx Area Controllers / Gateways – Most cost effective on-premises lighting system supervisory solution for small to medium building that supports up to 20 gateways (up to 20 wireless and 2 wired). • Smart Applications – Host WaveLinx CORE Applications, Admin and Lighting, that provide enterprise-level functionality for WaveLinx PRO system users to improve operational savings and maintenance. The applications offers device level management, building level management, user management, security management, alarms and events management and overall system management such as system backup/upgrades. • IEC-62443-2 and UL 2900-1 Certified – Secured data exchange with regards to your spaces (example: energy usage, occupancy status, device status) with third party systems via BACnet/IP and Public API (REST). • Options to meet Trade Agreements Act of 1979 (TAA) requirements CompatibilityProduct Features Compatibility Product Certification • IEC 60950-1• UL 60950-1• EN 60950-1• CAN/CSA-C22.2 No. 60950-1 • RoHS Directive 2011/65/EU• WEEE Directive 2012/19/EU Web Based COREAdmin COREExchange COREInsights CORELighting PRO WaveLinx Index Page1/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-TCPRO2 Notes: Type: SEATAC-WWA25-207407 CORE Pro PS50373423 page 2 November 2024 Order Information The WaveLinx CORE (Pro, Enterprise, Virtual) platforms are preloaded with CORE Admin and Lighting Apps. The WaveLinx CORE is shipped with a base software license which enables the Lighting application for up to 250 devices. After 250 devices, the customer should purchase WaveLinx CORE Lighting App license adders. WaveLinx CORE Insights Apps, BACnet/IP, API and OpenADR require a dedicated software license. Customers should purchase the appropriate WaveLinx CORE optional software licenses for any additional features. Catalog Number Domestic Preferences (1)Catalog Number Description [Blank] =Standard TAA = Trade Agreements Act TRX-TCPRO2 WaveLinx CORE Pro (shipped with WaveLinx Lighting and Admin Apps) Notes Product complies with the Trade Agreements Act of 1979 (TAA), which requires that products be substantially transformed in a designated (TAA-compliant) country. Please refer to DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analyzed under domestic preference requirements. Optional WaveLinx CORE Software Licenses Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number Description TRX-LGT250 WaveLinx CORE Lighting license adder for additional 250 devices TRX-APITRX-API API license for unlimited devices TRX-BACNETTRX-BACNET BACnet license for unlimited devices TRX-OPNADRTRX-OPNADR OpenADR Interface license for unlimited devices per site NotesPlease refer to the respective datasheets to learn about the other features. WaveLinx CORE Commissioning Services The CORE Lighting application includes graphical floor plan and energy dashboard software features. Services to configure these items MUST BE INCLUDED in WaveLinx CORE in lots of 250. Catalog Number Catalog Number Description TRX-CONFIG Commissioning/Setup services for WaveLinx CORE Energy and Graphical Floorplan for 250 devices 1 Notes1. Device placement only available for PRO (wireless), CAT (wired) and WaveLinx Panel devices.. A device is an input/output wireless/wired device that is connected to the controller. PRO Wireless, CAT wired and Panel Devices Each PRO, CAT and Panel device listed counts as one: (integrated sensors, ceiling sensors, outdoor sensors, wall stations, switch packs, receptacles, wireless drivers). Note: WaveLinx PRO Touchscreen and WaveLinx Area Hub are not counted as a device. WaveLinx Wired DAC nd Field Relay Devices: Each device counts as one. SCMH: 12 devices (A single SCMH counts as 12 devices) SCMR: 0 devices (see below) Note: As WaveLinx CORE 9.0 does not support device level monitoring, the device count is limited to output devices only listed above, i.e. wallstations and sensors are not included in the device count. We are not counting the SCMR in the device count. WaveLinx Index Page2/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-TCPRO2 Notes: Type: SEATAC-WWA25-207407 CORE Pro PS50373423 page 3 November 2024 Product Specifications Key Features • Rugged and reliable hardware - WaveLinx CORE Pro is a compact fanless computing device with a rugged enclosure designed for industrial applications. The rugged device can be placed in spaces where silent operation is needed or remote locations where fan failures would go unnoticed and result in system failure. • Performance at the edge - The WaveLinx CORE Pro is based on the Intel® Core™ i5 processor with Intel® Turbo Boost Technology 2.0 which gives extra GHz on demand to maximize performance on processor-intensive tasks. The hardware performance enables local management of a distributed connected lighting system composed of 20 WaveLinx Area Controllers. • IEC-62443-1 and UL2900-1 Certified - Secured data exchange with regards to your spaces (example: energy usage, occupancy status, device status) with third party systems via BACnet/IP and Public API (REST). System Performance Maximum number of gateways/area controllers: 20 Maximum number of nodes supported: 3,000 devices wired or wireless Maximum number of BACnet objects: 10,000 Mechanical Size: 7.5” x 4” x 3” (190mm x 102mm x 76mm) Weight: 3.4 lbs. (1.5 kg) Environment: • Operating temperature: 32°F to 104°F (0°C to 40°C) • Storage temperature: -4°F to 140°F (-20°C to 60°C) • For indoor use only Mounting: Mounting plate provided with the unit Electrical Power Requirements: • 19VDC • 65W AC-DC power adapter with detachable power Hardware Specifications Processor: 13th Gen Intel® Core™ i5 (1.3GHz to 3.8GHz Turbo, 12MB Intel® Smart Cache) Memory: 32GB Peripheral Connectivity: One 2.5Gb LAN (i226V) (back) • 3x USB 3.2 Gen2 Type-A (two front, one back) • 1x USB 2.0 Type-A (back panel) Model: NUC13ANFi5 Product Safety: • IEC 60950-1 • UL 60950-1 • EN 60950-1 • CAN/CSA-C22.2 No. 60950-1 Environmental Regulations: • RoHS Directive 2011/65/EU • WEEE Directive 2012/19/EU Software Specifications Refer to WaveLinx CORE spec sheet to learn about CORE applications Warranty Three year warranty Gateway Controller CORE Admin CORE Lighting CORE Locate CORE Partners Lighting Devices Storage Microservices CORE ExchangeBACnet/IP, APIs & OpenADR services WaveLinx CORE Services CORE Insights CORE Insightson Cloud Data Data Data Data WaveLinx Index Page3/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TRX-TCPRO2 Notes: Type: SEATAC-WWA25-207407 CORE Pro Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PS50373423 page 4 November 2024 View WaveLinx PRO Network and IT Guidance Technical Guide Sample System Topology: This diagram shows the main components of the WaveLinx wired and PRO wireless connected lighting system. The WaveLinx PRO wireless system communicates using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The WaveLinx wired system controls the devices using relay, 0-10V, DMX and the WaveLinx wired digital local bus. The WaveLinx wired system connects to the building LAN using the EG2 module. Each WaveLinx wired area controller communicates on the WaveLinx wired network. WaveLinx Area Controllers (WAC) and WaveLinx Ethernet Gateways (EG2) communicate with WaveLinx CORE over the Ethernet network. Please refer to the WaveLinx PRO Wireless Network and IT Guidance Technical Guide and WaveLinx Wired Network and IT Guidance Technical Guide for more information. Firewall CORE Admin CORE Lighting WaveLinx COREWorkstationwith Web Browser Smart Spaces Apps CORE Locate CORE Insights CORE Insights on the Cloud CORE Exchange Partner Apps 3rd PartySmart BuildingsApps API CORE Exchange Partner Apps Building AutomationSystem BACnet / IP CORE WaveLinx wired AND wireless WaveLinx AreaController Smartphone with WaveLinx app Up to 300 WaveLinxArea Controllers (WaveLinx CORE Enterprise & Virtual) Touchscreen Touchscreen WaveLinxWired network WaveLinxWired Local Bus 2-WIRE 20A Relay 2-WIRE Sensor Powerpack 2-WIRE Occupancy Ceiling Sensor Area or Room 2-WIRE Wallstation 2-WIRE, DALI-enabled, Indoor Fixture 2-WIRE Relay Controlled Fixture WaveLinx wired local bus devices(up to 64 devices per local bus) Note:Performance based on second generation WaveLinx Area Controller (WAC2) PRO OccupancyCeiling Sensor WaveLinx PRO controlled devices(up to 200 devices per WAC2 - 150 devices best practice) - see Note Area or Room(49 + 1 construction area) PRO Controlled Receptacle PRO Wallstation WaveLinx PRO enabled Indoor Fixture 120-347V 20A PRO Dimming Switchpacks WaveLinx PRO enabled Outdoor FixtureWaveLinx PRO enabled Industrial Fixtures Control Systems • WaveLinx • Greengate WaveLinx wired WaveLinx PRO/CAT/Panel Wa v e L i n x C O R E Connects to WaveLinx CORE (Pro, Enterprise, Virtual) # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Pro 2 / 3000 20 / 3000 # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Enterprise 10 / 32,500*300 / 32,500* # of WAC or EG2-S-NA / # of devices per WaveLinx CORE Virtual Enterprise 10 / 32,500*300 / 32,500* Connecting device EG2-S-NA WAC2-POE CO R E L i g h t i n g Alarms  Events  Operate (floorplan control) Operate - area control  Operate - zone control  Operate - device control  Scheduling  Energy Dashboard  Occupancy Dashboard  CO R E E x c h a n g e BACnet/IP  10,000 objects with WaveLinx CORE Proup to 30,000 with Enterprise/Virtual Public (REST) API  OpenADR  Demand Response  CO R E A d m i n Manage Users  Manage roles  Manage clients  Manage licenses  System settings (backup/restore, network etc) CO R E I n s i g h t s Occupancy Trends and Comparison  Average Occupancy  Occupancy on Floor Plan  Generate and Export Reports to pdf  Hierarchical Navigation  Quick Search  Department Filter  Historical View  Popular Spaces  * For larger number of gateways and devices, please contact Cooper Lighting Solutions Sales representatives. Recommend designing the system at 70-80% of maximum capacity. Specifications based on WAC2-POE. The number of gateways and devices mentioned above are the total for a single system or the combination (Wired + Wireless) that can be used with a server.  = All features  = Subset of features WaveLinx Index Page4/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503090EN page 1 July 2024 Overview The PRO W-Series Wallstation is a wireless, 120/277 VAC powered wallstation with configurable buttons including toggle, on/off, raise lower, preset scenes and zone light levels. Each button’s actions are configurable using the WaveLinx Mobile App. Each button has a LED indicator indicating the selected scenes or light level. The PRO W-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. Product Features & Benefits • Configurable button options – Power toggle (on/off), raise/lower, scene and zone light level. • LED Indicator on each button – Indicates the selected scene or light level • 120/277VAC powered (neutral required) – No battery replacement required • Button actions configurable via software – Customize the actions of each button using WaveLinx Mobile Application or WaveLinx CORE Lighting App Interactive Menu • Order Information pages 2 and 3 • Button Options pages 2 and 3 • Additional Resources page 5 • Connected Systems page 7 • Product Warranty Several small and large button configurations available Pre-Programmed and Field Programmable button options Product Certification* Product Features Available in White, Ivory, Gray and Black WaveLinx PRO Wallstation (W-Series) A wireless 120/277VAC powered wallstation with configurable button options including toggle on/off, raise lower and presets scenes and LED indicators on each button Part 15/ICEC-003 • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Compatibility Manual Dimmer IEEE 802.15.4 Device Security Customer Security Manually Switched ON/OFF PROWaveLinxWaveLinx Mobile App Typical Applications Office • Education • Hospitality • Retail • Industrial • Manufacturing Index Page1/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 2 July 2024 Order Information The PRO W-Series wallstation communicates with other PRO devices via the WaveLinx Area Controller. The wallstation is used to provide local and multi-level control in spaces and can be mapped to multiple zones in an area to create customizable light levels from simple control to architectural. Catalog Number Pre-Programmed Wallstations Catalog Number Description Color Options Button Engraving W1L -*WaveLinx Pro, 1 Button large wallstation *=W - White, V - Ivory, G - Gray, B - Black BLANK = Standard Engraving ENGRV = Customer Specified EngravingW1L-RL -*WaveLinx Pro, 1 Button large (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W2L -*WaveLinx Pro, 2 Button large wallstation *=W - White, V - Ivory, G - Gray, B - Black W2L-RL -* WaveLinx Pro, 2 Button large (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W3L -*WaveLinx Pro, 3 Button large wallstation *=W - White, V - Ivory, G - Gray, B - Black W2S -*WaveLinx Pro, 2 Button small wallstation *=W - White, V - Ivory, G - Gray, B - Black W2S-RL -*WaveLinx Pro, 2 Button small (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W4S -*WaveLinx Pro, 4 Button small wallstation *=W - White, V - Ivory, G - Gray, B - Black W4S-RL -*WaveLinx Pro, 4 Button small (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W5S -*WaveLinx Pro, 5 Button small wallstation *=W - White, V - Ivory, G - Gray, B - Black W6S -*WaveLinx Pro, 6 Button small wallstation *=W - White, V - Ivory, G - Gray, B - Black Notes Notes Field Programmable models are standard engraving options that require field programming through the WaveLinx Pro Mobile Application. All WaveLinx Pro Wallstations include standard engraving and color matching screwless single gang wallplates. For custom engraving use the configurator tool within the FlashPro tool. Full LightsFull LightsFull LightsFull LightsFull Lights Full Lights OFF OFF OFF OFF Half LightsHalf LightsHalf LightsHalf LightsHalf Lights ReadReadReadRead Relax Relax Relax Dimmed Full Lights Full LightsFull Lights Full Lights Full LightsOFF OFF Half Lights Half Lights W1L-* (* = W,V,G,B) W1L-RL-* (* = W,V,G,B) W3L-* (* = W,V,G,B) W2L-* (* = W,V,G,B) W2L-RL-* (* = W,V,G,B) W2S-* (* = W,V,G,B) W2S-RL-* (* = W,V,G,B) W4S-* (* = W,V,G,B) W4S-RL-* (* = W,V,G,B) W5S-* (* = W,V,G,B) W6S-* (* = W,V,G,B) Default engraving & light levels Half Lights Full Lights Read Relax Dimmed Night Off Scene 3 = 50% Scene 1 = 100% Scene 2 = 70% Scene 4 = 30% Scene 5 = 10% Scene 6 = 1% Scene 0 = Off ON/OFF Raise/Lower buttons Button programming options via WaveLinx Mobile Application Scene Selection Scene Toggle Zone Toggle Zone Level Raise Lower HR Release No Action Lowers Area light level Raise Area light level Toggles Scene 1 & Scene 0 WaveLinx Index Page2/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 3 July 2024 Catalog Number Field Programmable Wallstations Catalog Number Description Color Options Button Engraving W1L-RL-S1-*WaveLinx Pro, 1 Button large, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black BLANK = Standard Engraving ENGRV = Customer Specified EngravingW2L-RL-S2-*WaveLinx Pro, 2 Button large, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W2S-RL-S2-*WaveLinx Pro, 2 Button small, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W3L-S2-*WaveLinx Pro, 3 Button large, field programmable wallstation *=W - White, V - Ivory, G - Gray, B - Black W4S-S3-*WaveLinx Pro, 4 Button small, field programmable wallstation *=W - White, V - Ivory, G - Gray, B - Black W4S-RL-S4-*WaveLinx Pro, 4 Button small, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W5S-S4-*WaveLinx Pro, 5 Button small, field programmable wallstation *=W - White, V - Ivory, G - Gray, B - Black W5S-S2D-*WaveLinx Pro, 5 Button small, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W6S-S3-*WaveLinx Pro, 6 Button small, field programmable wallstation *=W - White, V - Ivory, G - Gray, B - Black W6S-S3D-*WaveLinx Pro, 6 Button small, field programmable (RAISE/LOWER) wallstation *=W - White, V - Ivory, G - Gray, B - Black W6S-S5-*WaveLinx Pro, 6 Button small, field programmable wallstation *=W - White, V - Ivory, G - Gray, B - Black Notes Notes Field Programmable models are standard engraving options that require field programming through the WaveLinx Pro Mobile Application. All WaveLinx Pro Wallstations include standard engraving and color matching screwless single gang wallplates. For custom engraving use the configurator tool within the FlashPro tool. Scene 2 OFF Scene 1 W3L-S2-* (* = W,V,G,B) W2L-RL-S2-* (* = W,V,G,B) Scene 2 Scene 1 W2S-RL-S2-* (* = W,V,G,B) Scene 2 OFF Scene 1 Scene 3 W4S-S3-* (* = W,V,G,B) Scene 2 Scene 1 Scene 3 Scene 4 W4S-RL-S4-* (* = W,V,G,B) Scene 2 OFF Scene 1 Scene 3 Scene 4 W5S-S4-* (* = W,V,G,B) Scene 2 OFF Scene 1 Raise Lower W5S-S2D-* (* = W,V,G,B) Full Lights OFF Half Lights Scene 1 Scene 2 Scene 3 W6S-S3-* (* = W,V,G,B) Scene 2 OFF Scene 1 Scene 3 Raise Lower W6S-S3D-* (* = W,V,G,B) Scene 2 OFF Scene 1 Scene 3 Scene 4 Scene 5 W6S-S5-* (* = W,V,G,B) These are standard engraving options that require field programming through the WaveLinx Mobile Application. Scene 2 Scene 1Scene 1 W1L-RL-S-1* (* = W,V,G,B) WaveLinx Index Page3/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 4 July 2024 Button Kits Catalog Number Pre-Programmed Button Kit Catalog Number Description Color Options Button Engraving W1L -BTS-*WaveLinx Pro, 1 Button large wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black BLANK = Standard Engraving ENGRV = Customer Specified EngravingW1L-RL -BTS-*WaveLinx Pro, 1 Button large (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W2L -BTS-*WaveLinx Pro, 2 Button large wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W2L-RL -BTS-* WaveLinx Pro, 2 Button large (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W3L -BTS-*WaveLinx Pro, 3 Button large wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W2S -BTS-*WaveLinx Pro, 2 Button small wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W2S-RL -BTS-*WaveLinx Pro, 2 Button small (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W4S -BTS-*WaveLinx Pro, 4 Button small wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W4S-RL -BTS-*WaveLinx Pro, 4 Button small (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W5S -BTS-*WaveLinx Pro, 5 Button small wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W6S -BTS-*WaveLinx Pro, 6 Button small wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black Notes Notes Field Programmable models are standard engraving options that require field programming through the WaveLinx Pro Mobile Application. All WaveLinx Pro Wallstations include standard engraving and color matching screwless single gang wallplates. Buttons Only. Catalog Number Field Programmable Button Kit Catalog Number Description Color Options Button Engraving W1L -RL -S1-BTS-*WaveLinx Pro, 1 Button large, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black BLANK = Standard Engraving ENGRV = Customer Specified Engraving W2L -RL -S2-BTS-*WaveLinx Pro, 2 Button large, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W2S -RL -S2-BTS-*WaveLinx Pro, 2 Button small, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W3L -S2-BTS-*WaveLinx Pro, 3 Button large, field programmable wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W4S -S3-BTS-*WaveLinx Pro, 4 Button small, field programmable wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W4S -RL -S4-BTS-*WaveLinx Pro, 4 Button small, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W5S-S4-BTS-*WaveLinx Pro, 5 Button small, field programmable wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W5S-S2D-BTS-*WaveLinx Pro, 5 Button small, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W6S-S3-BTS-*WaveLinx Pro, 6 Button small, field programmable wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W6S-S3D-BTS-*WaveLinx Pro, 6 Button small, field programmable (RAISE/LOWER) wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black W6S-S5-BTS-*WaveLinx Pro, 6 Button small, field programmable wallstation - BUTTONS ONLY *=W - White, V - Ivory, G - Gray, B - Black Notes Notes Field Programmable models are standard engraving options that require field programming through the WaveLinx Pro Mobile Application. All WaveLinx Pro Wallstations include standard engraving and color matching screwless single gang wallplates. Buttons Only. WaveLinx Index Page4/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 5 July 2024 Product Specifications Mechanical Size: 4.75”H x 3.35”W x 1.85”D (121mm x 83mm x 47mm) Environment: • Operating temperature: 32°F to 113°F (0°C to 45°C) • Storage temperature: 32°F to 167°F ( 0°C to 75°C) • Relative humidity operating: 5% to 95% non-condensing • For indoor use only Mounting: Standard decorator opening Color: White, Ivory, Gray and Black available Electrical Input power: 120-277VAC (neutral wire required) Input current: 20mA (120V), 15mA (277V) Hardware Specifications Status Indicators: • Button LEDs - White (1 per scene button) • LED functionality • Indication of wireless network join request • Indication of wireless network connection • Scene indication of operations Button Configuration: • Large buttons 1-3 • Small buttons 2,4,5,6 Software Specifications • Each button programmable to trigger or toggle Scene or Zone • Default values when joined to an area via WaveLinx Pro Mobile Application • Models available with dominant button 50% light level • Fade rates and scene transitions are programmable Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 7dBm Configuration type: Router, End Point Range: 150ft (50m) LOS through 2 interior walls of standard construction Note - metal faceplates will reduce wireless range System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • cULus Certified • FCC Part 15 • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Warning • This product is not intended to be used in applications involving the use of ammonia-based or VOC cleaners. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • For detailed cleaning guidelines please refer to: Controls Care and Maintenance instructions at the end of this document. Warranty Five year warranty standard Required Accessories All WaveLinx Pro connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC2) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector Download the WaveLinx Pro Mobile Application from either the Google Play or Apple Store® *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page5/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 6 July 2024 Installation Front Cover Inner Plate Main Body Dimensional Details Mounting Height 48” / 1210mm 58” / 1470mm WaveLinx Full Lights OFF Half Lights Full Lights Half Lights Read Relax 3.3"[83mm]3.3"[83mm]1.4"[36mm] 2.8"[72mm] 1.8"[47mm] 4.8"[121mm]4.8"[121mm] Index Page6/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Line Voltage Wallstation PS503090EN page 7 July 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page7/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: W2L-RL-W Notes: Type: SEATAC-WWA25-207407 SA50317022 April 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.comFor service or technical assistance:1-800-553-3879 Canada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172 © 2024 Cooper Lighting SolutionsAll Rights Reserved. Product availability, specifications, and compliances are subject to change without notice. This product is not intended for use in applications involving the use of ammonia-based or VOC cleaners. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. WARNING image for reference only Cooper Lighting SolutionsControls Care & Maintenance Cooper Lighting Solutions has developed recommended guidelines for cleaning our products that will not impact the operation or finish of the product. Recommended cleaning tips: • Never spray any fluids directly into the device. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • Use a damp rag or single-use wipe to avoid excess liquid penetrating the device. • Be sure to wipe up remaining excess liquid after cleaning. • Ensure the cleaning agent used does not have harsh chemicals such as bleach, ammonia, highly alkaline or concentrated acids (such as hydrochloric acid that can be found inhousehold cleaners such as toilet bowl cleaners, bathroom tile and porcelain cleaners) as they could damage the device, causing them to become brittle and discolored. • Cooper Lighting Solutions recommends the use of a mild liquid detergent and water to clean the devices. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however the single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. Recommended cleaning instructions: • Never spray any fluids directly into the device. • Apply the mild liquid detergent to a damp cloth or paper towel. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. • If excess liquid is present, remove by wringing out the cloth or paper towel to avoid liquid penetration into the device. • Clean the Cooper Lighting Solutions device by wiping over the surface with the damp cloth. • Remove an excess liquid remaining on the device with a dry cloth or paper towel. Index Page8/8Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAC2-POE Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503264EN page 1 July 2024 Interactive Menu • Order Information page 2 • Additional Resources page2 • Connected Systems page 3 • Product Warranty Overview The WaveLinx Area Controller (WAC) is the main component of the WaveLinx connected lighting (WCL) system. WaveLinx eliminates the cost and complexity of typical wireless control system commissioning while providing a flexible and reconfigurable topology for on the fly space adjustments. The WaveLinx system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings. The WAC coordinates between the WaveLinx PRO smart and connected Mobile App and various WaveLinx PRO devices to create communications and a building ecosystem that provides out-of-the-box functionality and leverages Cooper Lighting Solutions patent pending automatic code commissioning features. Using standard-based wireless mesh compliant topology the WAC communicates to various WaveLinx PRO standard-based devices to provide area, lighting zone configuration, monitoring, and control. The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response (WaveLinx CORE application required) , lighting, occupancy and daylight settings and scene control. A single WAC can be connected to the building Local Area Network (LAN) to coordinate 49 user-defined and one construction area, or multiple WACs can exist on a building LAN to scale the system to hundreds of areas all accessible for setup, configuration and control through the WaveLinx Mobile App. Product Features & Benefits • Built-in Wi-Fi with WPA2 - Securely and easily program your spaces with any Wi-Fi enabled IOS(r) or Android(r) compatible device using the free WaveLinx app or by any device with a supported web browser. • PRO (802.15.4) radio - Communicates with controls on a floor using Cooper Lighting PRO communication protocol. • Built-in time clock - Supports timeclock event based on both sunrise and sunset or fixed time-of-day. • Ethernet 10/1000/Mbps connection - Remotely access the WaveLinx Area Controller to make programming changes or network multiple WaveLinx Area Controllers together to manage them remotely using WaveLinx CORE. • Plenum rated and ceiling mount kit - Offers installation flexibility by allowing installers mount the WaveLinx Area Controller above or on ceilings, walls, rack. • Power via Power over Ethernet (PoE) with optional PoE injector - Offers installation flexibility by allowing installers to power the WaveLinx Area Controller via a PoE switch or 120VAC using the 120VAC to PoE injector. • Independently IECC 62443-2 cyber security certified - Build trust between manufacturers and end users by having DEKRA, an authorized cybersecurity certification lab, assess and certify the device. Typical Applications Office • Education • Healthcare • Hospitality • Retail Industrial • Manufacturing WaveLinx WaveLinx Area Controller, 2nd Gen (WAC2) Controls and manages communications between WaveLinx PRO wireless, Low-Voltage, network devices and the intuitive mobile application Wi-Fi Signal IEEE 802.15.4 Device Security Customer Security Product Certification* • Complies with the following electromagnetic requirements: FCC part 15 Sub Part B & C EN/IEC 61000-4-4 EN/IEC 61000-4-3 IEC62368-1 (Impulse test) EN/IEC 61000-4-5 UL/IEC 62368-1 EN/IEC 61000-4-2 Product Features Part 15/ICES-0003 IEC 62443-4-1and62443-4-2 CERTIFICATION Product FeaturesProduct Features Compatibility *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. PROWaveLinx COREWaveLinx WaveLinx CORE WaveLinx Mobile App Index Page1/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAC2-POE Notes: Type: SEATAC-WWA25-207407 WaveLinx Area Controller, 2nd Gen PS503264EN page 2 July 2024 Order Information All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC2) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector WAC2-POE WaveLinx Area Controller G2, PoE powered Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Product Specifications Mechanical Size: 4.69” W x 4.80” H x 1.99” D (119mm x 122mm x 50mm) Weight: 0.70 lbs (0.32 kg) with bracket 0.62 lbs (0.28 kg) without bracket Environment: • Operating temperature: 32°F to 122°F (0°C to 50°C) • PoE Injector temperature: 32°F to 122°F (0°C to 50°C) • PoE Injector storage temperature: -13°F to 158°F (-25°C to 70°C) • Storage temperature: -22° F to 185° F (-30°C to 85°C) • Relative humidity operating: 5% to 90% RH (non-condensing) • For indoor use only Mounting: Ceiling, wall or din rail mount options Color: White Electrical Input Connections: • POE 1-/100BaseTx Cat. 5 RJ45 port • PAIR button allows devices to join the network Input Power: • PoE (IEEE 802.3af) Hardware Specifications Status Indicators: • LAN connectivity LED - green • WAN connectivity LED - green • Wi-Fi connectivity LED - blue • BT reserved for future functionality - blue • IEEE 802.15.4 connectivity LED - blue • Power indication LED - blue Software Specifications Programming: • Settings and Configuration stored in non-volatile flash memory • Up to 200 total WCL devices (for best performance, connect up to 150 devices) • 49 user defined areas + 1 construction area • Up to 200 total zones per WAC2 • Up to 100 occupancy sets per WAC2 • Individual luminaire daylight sets (when using integrated sensors) Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 (802.11 wifi used for mobile app connection) Transmitter Power: • IEEE802.15.4: Max 16.2 dBm, Min 14.15 dBm • WiFi: Max 10.39 dBm, Min 9.68 dBm Range: 150ft (50m) LOS through 2 standard construction walls (best practice) Note – consult outdoor sensor spec sheets for guidance when connecting to devices located outdoors System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • UL/IEC 62368-1 (IT Equipment) • UL 2043 (Plenum Mounting) • FCC Part 15/ICES-003 • IEC 62443-4-2 Cybersecurity Certification • DLC QPL Listed • Complies with the following electromagnetic requirements: • FCC part 15 Sub Part B & C • EN/IEC 61000-4-2 • EN/IEC 61000-4-3 • EN/IEC 61000-4-4 • EN/IEC 61000-4-5 • IEC62368-1 (Impulse test) • UL/IEC 62368-1 Warranty Five year warranty standard Dimensional Details 4.69"[119mm] 4.69"[119mm]1.97"[50mm] 4.80"[122mm] WaveLinx Index Page2/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAC2-POE Notes: Type: SEATAC-WWA25-207407 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PS503264EN page 3 July 2024 WaveLinx Area Controller, 2nd Gen View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page3/3Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAH-C-POE-ID Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS50327423 page 1 June 2024 Interactive Menu • Order Information page 2 • Additional Resources page 2 • Wiring Diagrams page 3 • Connected Systems page 4 • Product Warranty Typical Applications Office • Education • Healthcare • Hospitality • Retail WaveLinx Area Hub (WAH-C-POE-ID) Bridging Device for WaveLinx Network Solution Product Certification* • cULus Listed - Emergency Lighting and Power Equipment (UL924) • Meets latest ASHRAE 90.1 - 2019 requirements • Meets latest IECC - 2021 requirements • Meets latest Title 24 - 2019 requirements • Manufactured in an ISO 9001 certified factory Part 15/ECES-003 Zone - AreaOut of the Box Functionality product diagrams Overview The WaveLinx Area Hub (WAH-C-POE-ID) is an IP-to-CAT bridge connecting CAT devices to the WaveLinx Area Controller. This device is an integral component of the communication backbone in the topology of a connected space. The Area Hub has 8 RJ45 ports into which areas of daisy-chained WaveLinx CAT devices can connect. The device acts as a router, allowing data exchange between the CAT devices and the WaveLinx Area Controller. Product Features & Benefits • 8 RJ45 ports for WaveLinx CAT communication bus – Allows up to 8 areas to be connected to the WaveLinx Area Controller with up to 40 devices per port • LED indicators per port – Helps installer to assess the network connection status quickly • Plenum rated – Allows installer to install the device in a plenum space • Remotely upgradeable – Allows installer to upgrade the device over ethernet • PoE powered – Simplifies the design of a connected spaces solution by leveraging the benefits of power over ethernet Product Features CAT Mobile App Compatibility *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. CAT WaveLinx Index Page1/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAH-C-POE-ID Notes: Type: SEATAC-WWA25-207407 PS50327423 page 2 June 2024 Area Hub Order Information Catalog Number Catalog Number Description WAH-C-POE-ID WaveLinx Area Hub Required Accessory The WaveLinx CAT network requires termination of the local CAT bus network on both ends. Catalog Number Catalog Number Description ACC-C-TP-6PK ACC-C Canbus Termination Plug - 6PK Optional Accessories Catalog Number Catalog Number Description GGRJ45-006-G RJ45 cables 6 inches GGRJ45-03-G RJ45 cables 3 feet GGRJ45-10-G RJ45 cables 10 feet GGRJ45-25-G RJ45 cables 25 feet GGRJ45-50-G RJ45 cables 50 feet GGRJ45-100-G RJ45 cables 100 feet GGRJ45-10P-G RJ45 cables 10 feet plenum rated GGRJ45-25P-G RJ45 cables 25 feet plenum rated GGRJ45-50P-G RJ45 cables 50 feet plenum rated GGRJ45-100P-G RJ45 cables 100 feet plenum rated Product Specifications Download the WaveLinx CAT Mobile Application from either the Google Play or Apple Store® Mechanical Size: 4.4” x 8.2” x 1.6” (112mm x 220mm x 39.55mm) Mounting: Extended Chase Nipple Color: Black Environmental: • Operating temperature: 32°F to 122°F (0°C to 50°C) • Storage temperature: 22°F to 185 °F (-30°C to 85°C) • Relative humidity operating: 5 to 95% non-condensing • For indoor use only Electrical Power Input: POE Switch Powered Network connection: • CAT5 Solid Copper 24AWG • T568B pin/pair assignment is recommended for all CAT5 cable Standards/Ratings* • cULus Listed - Energy Management Equipment (UL916) • UL Listed (UL508) • cULus Listed - Emergency Lighting and Power Equipment (UL924) • FCC Part 15, Part B • Manufactured in an ISO 9001 certified factory • Meets latest ASHRAE 90.1 - 2019 requirements • Meets latest IECC - 2021 requirements • Meets latest Title 24 - 2019 requirements • Plenum UL2043 • Chicago Plenum rated Environmental Regulations: • RoHS Warranty Five year warranty standard *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page2/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAH-C-POE-ID Notes: Type: SEATAC-WWA25-207407 PS50327423 page 3 June 2024 Area Hub 2.8”[72mm] 4.4”[112mm] 3.0”[76mm] 8.7”[220mm] 8.2”[207.23mm] 4.7”[118.50mm] 1.6”[39.55mm] 1.1”[27.65mm] .5”[12.50mm] 2X ø 0.2”[5.07mm] Dimensional Details WaveLinx Index Page3/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAH-C-POE-ID Notes: Type: SEATAC-WWA25-207407 PS50327423 page 4 June 2024 Area Hub Wiring Diagram GS308P-100NAS to additional Area Hubs PoE max 1 2 3 4 5 6 7 8 Power WAH-C-POE-ID WAC2-POE 765 83214 1 2 3 4 5 6 7 8 Typical Topology 1 2 3 4 To other WaveLinx CAT devices OR terminator plug To other WaveLinx CAT devices OR terminator plug OCS-C-P*ESP-C RSP-C emergencypower normal power normal power BPI-C WST-C-*CCI-C SIM-CRSP-C OAC-DT-2000-R ContactClosureInput WaveLinx Index Page4/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WAH-C-POE-ID Notes: Type: SEATAC-WWA25-207407 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PS50327423 page 5 June 2024 Area Hub View WaveLinx PRO Network and IT Guidance Technical Guide Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. Control Systems • WaveLinx WaveLinx Index Page5/5Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TSE57-WLX-B Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503092EN page 1 July 2024 Overview The WaveLinx TSE57 touchscreen provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” [14.5cm] touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces. Product Features & Benefits • Light control – Control the lights for a room/open space by allowing users to recall the light scenes/presets defined for the area and to raise/lower the light level for the entire area or the zones defined within an area. • Architectural design – Low profile design with edge to edge glass and high resolution display making the touchscreen look amazing on any wall. The touchscreen’s user interface has been designed to ensure that users can immediately understand how to operate the touchscreen. • Easy installation – The touchscreen easily mounts in a single gang switch box (minimum 1.4" / 35mm depth required) and is powered via PoE (IEEE 802.3af). Once powered, all the installer has to do, is select the WaveLinx Area Controller (WAC) discovered on the network and one of the user defined areas. All the information with regards to the scene names, zone names is automatically imported from the WaveLinx Area Controller . Interactive Menu • Order Information page 2 • Additional Resources page 3 • Wiring Diagrams page 3 • Connected Systems page 4 • Product Warranty Typical Applications Office • Education • Healthcare • Hospitality • Retail WaveLinx Touchscreen (TSE57) Provides an elegant and discreet light control for for spaces controlled by the WaveLinx Area Controller side view Product Certification Product Features Title 47Part 15Class B Manual Dimmer IEEE 802.15.4 Device Security Customer Security Manually Switched ON/OFF • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Compatibility WaveLinx Mobile App PRO WaveLinx CAT WaveLinx Index Page1/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TSE57-WLX-B Notes: Type: SEATAC-WWA25-207407 PRO Touchscreen PS503092EN page 2 July 2024 Order Information The touchscreen is an accessory to the WaveLinx connected lighting (WCL) system and requires a WaveLinx Area Controller (WAC) for full functionality. Catalog Number Catalog Number Description TSE57- WLX-B 5.7" Touchscreen for Wavelinx Required Accessories All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC2) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Product Specifications Mechanical Size: 5.0” x 2.9” x 0.3” (128 x 75 x 8mm) 0.6” (15mm) depth inside wall box Environment: • Operating temperature: 32°F to 104°F (0°C to 40°C) • Storage temperature: 4°F to 158°F (-20°C to 70°C) • Relative humidity: 0 - 90% non-condensing • For indoor use only Mounting: North America: single–gang switchbox (Arlington LV1) Europe: single-gang Ø 65mm outlet switchbox (IEC/EN 60670) UK: single gang electrical box BS 4662, BSEN 60670 Do not mount on metal surface Mounting Height: 48”- 58” (121cm-147cm) above finished floor Color: Black trim Housing: High glass plastic Electrical Input Power: • PoE (IEEE 802.3af) • 4W (typical) / 8W (max) Display: • High performance 5.77” LCD • High definition resolution (1440 x 720) • Projected Capacitive Touch supporting multi-touch and gesture Network: • Gigabit Ethernet controller • RJ-45 Ethernet port connectivity System Performance Capacity: Up to 16 per WAC Standards/Ratings* • cULus Listed - Energy Management Equipment (UL916) • FCC Title 47, Part 15 Class B • CE • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Environmental Regulations: • RoHS Directive 2011/65/EU • WEEE Directive 2012/19/EU Warranty Five year warranty standard *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page2/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TSE57-WLX-B Notes: Type: SEATAC-WWA25-207407 PRO Touchscreen PS503092EN page 3 July 2024 Installation • Connect the Touchscreen to a POE network switch via an ethernet (CAT5 or higher) cable using the RJ45 port on the rear of the touchscreen • The Touchscreen flush mounts in a portrait orientation to a single-gang switch box • Do not mount on metal surface • Use the Settings menu (PIN protected) on the Touchscreen for setup, i.e. associate it to a WaveLinx Area Controller and select one of the areas configured on the selected WaveLinx Area Controller For more information, please refer to the Wavelinx Touchscreen Installation Guide. Wiring Diagrams PoE Network Switch PoE Injector PoE Network Switch DHCP Server (by others) WaveLinx CORE Dynamic IP address Dynamic IP address Static IP address Static IP address Network Installation Stand Alone Installation Dimensional Details Mounting Height LAN + Power over Ethernet 5.0"[128mm]5.0"[128mm] 0.1" [3mm] 0.6"[15mm] 2.9" [75mm] 5.0"[128mm] 2.9" [75mm] 48” / 1210mm 58” / 1470mm WaveLinx Index Page3/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: TSE57-WLX-B Notes: Type: SEATAC-WWA25-207407 PRO Touchscreen PS503092EN page 4 July 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page4/4Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503097EN page 1 July 2024 Octagonal junction box installation Interactive Menu • Order Information page 2 • Additional Resources page 3 • Connected Systems page 7 • Product Warranty Typical Applications Office • Education • Healthcare • Hospitality • Retail Industrial • Manufacturing WaveLinx PRO Tilemount Sensor Kit (WTA) Provides motion sensing, daylight dimming and wireless control for connected 0-10V luminaires that do not support the WaveLinx PRO integrated sensor Tilemount sensor shown above ceilingCeiling tile sensor kit Product Certification* • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirementsPart 15/ICES-003 Product Features IEEE 802.15.4 Device Security Customer Security Daylighting Control Occupancy Sensor Compatibility Overview The WaveLinx Tilemount Sensor Kit is an integral part of the WaveLinx connected lighting (WCL) system and offers 120-277VAC 3 amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the Tilemount Sensor Kit is to provide daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx integrated sensor. The Tilemount Sensor Kit is powered by the 120-277VAC circuit it is controlling and allows simple electrical junction box mounting via ½” knock out or direct connection to the junction box attached to connected luminaire. The WaveLinx Tilemount Sensor Kit operates on a wireless mesh network based on IEEE 802.15.4 standards and is controlled by the WaveLinx Area Controller. Product Features & Benefits • Easily enable 0-10V luminaires to be controlled by WaveLinx PRO • 120-277VAC with 3 amp zero cross relay and 0-10V continuous dimming • 10mA 0-10V sink (refer to driver specifications to calculate quantity supported) • Mounting heights of 8 to 15ft (2.4 to 4.5m) • Provides passive infrared (PIR) motion coverage up to 500 sq-ft (46m2) • Provides closed loop daylighting control of non-integrated luminaires • Control module mounting to junction box or luminaire driver compartment • Sensor installs into 1/2 - 3/4” (12 - 19mm) ceilings or octagonal junction boxes • Hardware capable of Real Time Location Services (RTLS) - CORE Locate license required *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Mobile App PRO WaveLinx Index Page1/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PRO Tilemount Sensor Kit PS503097EN page 2 July 2024 Product Specifications Key Features Kit Contents: • Sensor • Control module • 54” Plenum rated cable • Tile and 4” octagon mounting trim • Easily enable 0-10V luminaires to be controlled by WaveLinx • Provides closed loop daylighting control of non-integrated luminaires • Control module mounting to junction box or luminaire driver compartment • Sensor installs into 1/2 - 3/4” (12 - 19mm) ceilings or octagonal junction boxes • Ceiling white trims that can be painted for custom appearance • Mounting heights of 8 to 15ft (2.4 to 4.5m) • Provides passive infrared (PIR) motion coverage up to 500 sq-ft (46m2) • Hardware capable of Real Time Location Services (RTLS) CORE Locate license required • Energy calculations available through WaveLinx CORE Mechanical Tilemount Sensor Size: 2.8” x 2.8” x 1.2” (70mm x 70mm x 31mm) J-Box Sensor Size: 4.1” x 4.1” x 1.0” (105mm x 105mm x 24mm) Environment: • Operating temperature: -4°F to 131°F (-20°C to 55°C) • Storage temperature: -40°F to 158°F (-40°C to 70°C) • Relative humidity operating: 5% to 95% non-condensing • For indoor use only Mounting Height: 8-15ft (2.4 to 4.5m) Ceiling hole diameter: 2.9” (73mm) Ceiling thickness: 0.5 to 0.75” (12 - 19mm) drop ceiling thickness Color: Matte white (field paintable trim) Housing: UV stabilized plastic Electrical • 120/277VAC incoming and switched power • 10mA 0-10V sink (refer to driver specifications to calculate quantity supported) • 3A LED loads Software Specifications • Any number of sensors can be mapped to any number of zones • Remote configuration of occupancy sensing and closed loop daylighting Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 7dBm Range: 75ft (25m) LOS # of Walls: 2 interior walls standard construction Standards/Ratings* • cULus Listed • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Environmental Regulations: • RoHS Directive 2011/65/EU Warranty • Five year warranty standard Order Information The Tilemount Sensor Kit is an accessory to the WaveLinx connected lighting (WCL) system and requires a WaveLinx Area Controller (WAC) for full functionality. The wireless tilemount sensor kit is used to provide occupancy sensing and closed loop daylighting in spaces and can be mapped to other sensors in an area for maximum coverage and control. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors. Catalog Number Catalog Number Description WTA WaveLinx PRO Tilemount Sensor Kit Required Accessories All WaveLinx connected lighting (WCL) system accessories require at least one WaveLinx Area Controller (WAC) for communications. Ensure the bill of material includes one of the following components. Catalog Number Catalog Number Description WAC2-POE WaveLinx Area Controller G2, PoE powered WAC2-120 WaveLinx Area Controller G2 with 120VAC to PoE Injector Optional Accessories For connection to 120VAC outlets. Catalog Number Catalog Number Description WPOE2-120 120VAC to PoE Injector *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Index Page2/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PRO Tilemount Sensor Kit PS503097EN page 3 July 2024 Dimensional Details Mounting Height ø 4.1"[105mm]2.8"[70mm] Sensor for Tilemountinstallation Sensor for J-Boxinstallation 8' [2.4m] 15' [4.5m] Wiring Diagrams 120/277VAC Black (Hot) White (Neutral) Purple (Dimming) White (Neutral) Blue (Not Switched) Pink (Dimming) Control module(MSP3IVMVDC1EP)0-10VDImming Driver WaveLinx Pro Tilemount Sensor Kit control module (MSP3IVMVDC1EP) (included) 54” Plenum cable (5140-000123-00) (included) 120/277 VAC 3A downlights with 0-10V control WaveLinx Pro Sensor and Mounting Trim (included) Includes switchleg (Blue load out wire) and 0-10V to each fixture controlled ceiling tileceiling tile Tilemount Installation ceiling tile ceiling tile Step 1: Cut 2-7/8” (73mm) to 3” (76mm) diameter hole in ceiling tile. Step 2: Connect plenum cable connectors. Step 3: Snap sensor body into ceiling trim. Step 4: Squeeze trim springs and insert through hole. 3 4 2 1 WaveLinx Index Page3/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PRO Tilemount Sensor Kit PS503097EN page 4 July 2024 J-Box Installation Step 1: Snap sensor body into cover plate. Step 2: Pull plenum sensor cable through junction box knockout. Step 3: Connect plenum cable connectors. Step 4: Secure sensor kit to junction box. 4 2 3 1 Additional Dimensional Details - Tilemount Sensor 1. 2 " [3 1 m m ] ø 3 . 3 " [8 3 m m ] 1.2"[31mm] Additional Dimensional Details - J-Box Sensor 3.5"[89mm] 1.0"[24mm] 0.8"[21mm] ø 4.1"[105mm] WaveLinx Index Page4/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PRO Tilemount Sensor Kit PS503097EN page 5 July 2024 Additional Dimensional Details - Control module 1. 1 " [2 8 m m ] 1.1"[28mm] 1. 6 " [4 0 m m ] 6.3"[159mm] 6.6"[168mm] WaveLinx Index Page5/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PRO Tilemount Sensor Kit PS503097EN page 6 July 2024 Field of View Recomended Mounting Height 8 to 15 ft [2.4 to 4.5m]. TOP VIEW: SIDE VIEW: Notes: (1) The coverage pattern shown above depicts the area below the luminaire where the integrated sensor system can detect occupancy. (2) Spacing between fixtures should not exceed the coverage pattern of the sensor. (3) Mounting height should not exceed coverage shown. (4) Exceeding these spacing/height guidelines will result in reduced integrated sensor performance. Note - coverage pattern not to scale 8 ft [2.4m] CL CL 10 ft [3.0m] 15 ft [4.5m] 15 ft [4.5m] 0 ft [0m] 15 ft [4.5m]15 ft [4.5m] 15 ft [4.5m] 0 ft [0m] 0 ft [0m] 7.5 ft [2.25m] 7.5 ft [2.25m] WaveLinx Index Page6/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WTA Notes: Type: SEATAC-WWA25-207407 PS503097EN page 7 July 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. PRO Tilemount Sensor Kit View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page7/7Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503258EN page 1 December 2024 Overview The PRO Wallstation is an integral part of the WaveLinx connected lighting system and is available in several small and large button configurations in white color. These wallstations are battery-powered and provide wireless control of the lighting in each area. The wallstation mounts to a low-voltage wall box (single or multi-gang) and is suitable for a standard or decorator wallplate (not included). Each wallstation is fully configurable to provide local and multi-level control in each area. Each button is configured to control a lighting scene for an area and can be modified using the WaveLinx Mobile Application. The wallstation is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default operations, but is fully configurable from the WaveLinx Mobile Application. Two wallstation configurations also include scene raise / lower buttons to further adjust the light levels. Product Features & Benefits • Standard settings, multi-scene selection, raise/lower, on/off toggle for an area • Suitable for standard single or multi-gang NEMA wall box • Utilizes two (2) CR123A alkaline batteries for simple new or retrofit installations • Clean, elegant and simple control • 5 Color options available • Configurable through the WaveLinx Mobile Application Interactive Menu • Order Information page 2 • Button Options page 2 • Additional Resources page 3 • Product Warranty WaveLinx PRO Battery-Powered Wallstation (WWB-Series) and colored wallstations (WST series) Multi-scene dimming battery-powered wallstation which provides customized light level for each area Product Certification* Product Features Part 15/ICEC-003 • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Typical Applications Office • Education • Hospitality • Retail • Industrial • Manufacturing Manual Dimmer IEEE 802.15.4 Device Security Customer Security Battery Powered Manually Switched ON/OFF *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Compatibility Small and large button configurations available Suitable for use with standard and Decora wallplates (not included) WaveLinx Mobile App PRO WaveLinx Colors available W White V Ivory B Black R Red G Gray A Light Almond Index Page1/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 2 December 2024 Order Information All WaveLinx PRO control devices require at least one WaveLinx Area Controller for communications. Please ensure that you order a WaveLinx Area Controller (CATNO: WAC2-POE) for the product to work or connect the wallstations to an existing WaveLinx Area Controller. Important Note: The WaveLinx wallstation only works with version 12+ of the 2nd generation WaveLinx Area Controller (WAC2-POE). It does not work with the 1st generation WaveLinx Area Controller (WAC-POE). SAMPLE ORDER NUMBER: WST-P-3D-R-BP (Wavelinx PRO, 3 Button Dimming, Red, Battery Powered) Catalog Number Standard Wallstation Configurations Catalog Number Description WWB1-W WaveLinx PRO Battery-powered Wallstation, 1 Button, White WWB3-W WaveLinx PRO Battery-powered Wallstation, 3 Button, White WWB3-RL-W WaveLinx PRO Battery-powered Wallstation, 3 Button Raise / Lower, White WWB5-RL-W WaveLinx PRO Battery-powered Wallstation, 5 Button Raise / Lower, White Notes Notes WaveLinx mobile application required to customize programming for each button.Suitable for use with standard decorator wall plates (not included). Complete wallstation - buttons are not field replaceable. Custom Engraved Wallstation Configurations Catalog Number Description WWB1-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 1 Button, White, Custom Engraved WWB3-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 3 Button, White, Custom Engraved WWB3-RL-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 3 Button Raise / Lower, White, Custom Engraved WWB5-RL-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 5 Button Raise / Lower, White, Custom Engraved Notes Notes WaveLinx mobile application required to customize programming for each button.Suitable for use with standard decorator wall plates (not included). For custom engraving use the configurator tool within the FlashPro Program (CUST-ENGRV). Complete wallstation - buttons are not field replaceable. Colored Wallstation Configurations Product System Type Button Configuration Color Power Supply Custom Engraving WST = Wallstation P = PRO 1 = 1 Button 3 = 3 Button 3D = 3 Button Dimming 5D = 5 Button Dimming V = Ivory G = Gray A = Light Almond B = Black R = Red BP = Battery Powered ENGRV = Custom Engraved Notes Notes WaveLinx mobile application required to customize programming for each button. Suitable for use with standard and Decora wallplates (not included). Buttons are not field replaceable.For configuring Custom Engraved wall stations, please use Configurable Spec Sheet Additional Accessories Wallplates are not included with Wallstations. Please order separately. Catalog Number Catalog Number Description PJS26W 1 Gang Screwless Faceplate, White PJS262W 2 Gang Screwless Faceplate, White PJS263W 3 Gang Screwless Faceplate, White PJS264W 4 Gang Screwless Faceplate, White PJS265W 5 Gang Screwless Faceplate, White *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Colors available W White V Ivory B Black R Red G Gray A Light Almond Index Page2/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 3 December 2024 Product Specifications Mechanical Size: 4.2”H x 1.8”W x 1.5”D (107mm x 45mm x 39mm) Environment: • Operating temperature: 32°F to 113°F (0°C to 45°C) • Storage temperature: 32°F to 167°F ( 0°C to 75°C) • Relative humidity operating: 5% to 95% non-condensing • For indoor use only Mounting: Standard single or multi-gang NEMA wall box, and compatible with a decorator wall plate (not included) Colors: White, Ivory, Gray, Light Almond, Black and Red Electrical Power supply type: Utilizes two (2) CR123A alkaline batteries (included) Hardware Specifications Status Indicators: • Single indicator LED • LED functionality (active for 3 seconds after action) • Indication of wireless network join request • Indication of wireless network connection • Scene indication of operations Button Configuration: • 1 Button • 3 Button • 3 Button with Raise / Lower • 5 Button with Raise / Lower Software Specifications • Each button programmable to trigger or toggle Scene or Zone • Default values when joined to an area via WaveLinx Mobile application • Models available with dominant button 50% light level • Fade rates and scene transitions are programmable Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 7dBm Configuration type: Router, End Point Range: 100ft (30m) LOS through 2 interior walls of standard construction Note: Use of metallic wall plates is not recommended as they may interfere with the wireless signals System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • FCC Part 15, Subpart B & C • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements • NEMA WD-7 and NEMA 4 compliant • CA Title 20 and Prop 65 compliant • RoHS Warning • This product is not intended to be used in applications involving the use of ammonia-based or VOC cleaners. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • For detailed cleaning guidelines please refer to: Controls Care and Maintenance instructions at the end of this document. Warranty Five year warranty standard WWB1-W Raise / Lower / OFF buttons Button programming options via WaveLinxMobile Application Scene Selection Zone Level Raise Level Lower Level Toggle Scene or Zone Level No Action Raise Area light level Lowers Area light level Turns all lights in area ON / OFF Default engraving & light levels Button 1 Scene 3 = 50% Button 2 Scene 1 = 100% Button 3 Scene 2 = 70% Button 4 Scene 4 = 30% Raise press* Increase 1% (per press) hold* Increase 15% (per sec) Lower press* Decrease 1% (per press) hold* Decrease 15% (per sec) Power* Toggle Scene 3 (50%) & Scene 0 (Off) * - affects last button press (OR last selected) command within the area Standard button engraving for each wallstation 1 2 1 2 1 2 3 4 WWB3-W WWB3-RL-W WWB5-RL-W *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Download the WaveLinx Mobile Application from either the Google Play or Apple Store® WaveLinx Index Page3/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 4 December 2024 Installation Wall plate not included Dimensional Details Mounting Height 48” / 1210mm 58” / 1470mm 1.3"[32mm]1.8"[45mm] 1.5"[36mm] 4.2"[107mm]4.2"[107mm] 1 2 WaveLinx Index Page4/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 5 December 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page5/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB3-RL-W Notes: Type: SEATAC-WWA25-207407 SA50317022 April 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.comFor service or technical assistance:1-800-553-3879 Canada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172 © 2024 Cooper Lighting SolutionsAll Rights Reserved. Product availability, specifications, and compliances are subject to change without notice. This product is not intended for use in applications involving the use of ammonia-based or VOC cleaners. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. WARNING image for reference only Cooper Lighting SolutionsControls Care & Maintenance Cooper Lighting Solutions has developed recommended guidelines for cleaning our products that will not impact the operation or finish of the product. Recommended cleaning tips: • Never spray any fluids directly into the device. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • Use a damp rag or single-use wipe to avoid excess liquid penetrating the device. • Be sure to wipe up remaining excess liquid after cleaning. • Ensure the cleaning agent used does not have harsh chemicals such as bleach, ammonia, highly alkaline or concentrated acids (such as hydrochloric acid that can be found inhousehold cleaners such as toilet bowl cleaners, bathroom tile and porcelain cleaners) as they could damage the device, causing them to become brittle and discolored. • Cooper Lighting Solutions recommends the use of a mild liquid detergent and water to clean the devices. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however the single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. Recommended cleaning instructions: • Never spray any fluids directly into the device. • Apply the mild liquid detergent to a damp cloth or paper towel. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. • If excess liquid is present, remove by wringing out the cloth or paper towel to avoid liquid penetration into the device. • Clean the Cooper Lighting Solutions device by wiping over the surface with the damp cloth. • Remove an excess liquid remaining on the device with a dry cloth or paper towel. Index Page6/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 Project Catalog #Type Prepared by Notes Date PS503258EN page 1 December 2024 Overview The PRO Wallstation is an integral part of the WaveLinx connected lighting system and is available in several small and large button configurations in white color. These wallstations are battery-powered and provide wireless control of the lighting in each area. The wallstation mounts to a low-voltage wall box (single or multi-gang) and is suitable for a standard or decorator wallplate (not included). Each wallstation is fully configurable to provide local and multi-level control in each area. Each button is configured to control a lighting scene for an area and can be modified using the WaveLinx Mobile Application. The wallstation is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default operations, but is fully configurable from the WaveLinx Mobile Application. Two wallstation configurations also include scene raise / lower buttons to further adjust the light levels. Product Features & Benefits • Standard settings, multi-scene selection, raise/lower, on/off toggle for an area • Suitable for standard single or multi-gang NEMA wall box • Utilizes two (2) CR123A alkaline batteries for simple new or retrofit installations • Clean, elegant and simple control • 5 Color options available • Configurable through the WaveLinx Mobile Application Interactive Menu • Order Information page 2 • Button Options page 2 • Additional Resources page 3 • Product Warranty WaveLinx PRO Battery-Powered Wallstation (WWB-Series) and colored wallstations (WST series) Multi-scene dimming battery-powered wallstation which provides customized light level for each area Product Certification* Product Features Part 15/ICEC-003 • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements Typical Applications Office • Education • Hospitality • Retail • Industrial • Manufacturing Manual Dimmer IEEE 802.15.4 Device Security Customer Security Battery Powered Manually Switched ON/OFF *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Compatibility Small and large button configurations available Suitable for use with standard and Decora wallplates (not included) WaveLinx Mobile App PRO WaveLinx Colors available W White V Ivory B Black R Red G Gray A Light Almond Index Page1/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 2 December 2024 Order Information All WaveLinx PRO control devices require at least one WaveLinx Area Controller for communications. Please ensure that you order a WaveLinx Area Controller (CATNO: WAC2-POE) for the product to work or connect the wallstations to an existing WaveLinx Area Controller. Important Note: The WaveLinx wallstation only works with version 12+ of the 2nd generation WaveLinx Area Controller (WAC2-POE). It does not work with the 1st generation WaveLinx Area Controller (WAC-POE). SAMPLE ORDER NUMBER: WST-P-3D-R-BP (Wavelinx PRO, 3 Button Dimming, Red, Battery Powered) Catalog Number Standard Wallstation Configurations Catalog Number Description WWB1-W WaveLinx PRO Battery-powered Wallstation, 1 Button, White WWB3-W WaveLinx PRO Battery-powered Wallstation, 3 Button, White WWB3-RL-W WaveLinx PRO Battery-powered Wallstation, 3 Button Raise / Lower, White WWB5-RL-W WaveLinx PRO Battery-powered Wallstation, 5 Button Raise / Lower, White Notes Notes WaveLinx mobile application required to customize programming for each button.Suitable for use with standard decorator wall plates (not included). Complete wallstation - buttons are not field replaceable. Custom Engraved Wallstation Configurations Catalog Number Description WWB1-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 1 Button, White, Custom Engraved WWB3-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 3 Button, White, Custom Engraved WWB3-RL-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 3 Button Raise / Lower, White, Custom Engraved WWB5-RL-W-ENGRV WaveLinx PRO Battery-powered Wallstation, 5 Button Raise / Lower, White, Custom Engraved Notes Notes WaveLinx mobile application required to customize programming for each button.Suitable for use with standard decorator wall plates (not included). For custom engraving use the configurator tool within the FlashPro Program (CUST-ENGRV). Complete wallstation - buttons are not field replaceable. Colored Wallstation Configurations Product System Type Button Configuration Color Power Supply Custom Engraving WST = Wallstation P = PRO 1 = 1 Button 3 = 3 Button 3D = 3 Button Dimming 5D = 5 Button Dimming V = Ivory G = Gray A = Light Almond B = Black R = Red BP = Battery Powered ENGRV = Custom Engraved Notes Notes WaveLinx mobile application required to customize programming for each button. Suitable for use with standard and Decora wallplates (not included). Buttons are not field replaceable.For configuring Custom Engraved wall stations, please use Configurable Spec Sheet Additional Accessories Wallplates are not included with Wallstations. Please order separately. Catalog Number Catalog Number Description PJS26W 1 Gang Screwless Faceplate, White PJS262W 2 Gang Screwless Faceplate, White PJS263W 3 Gang Screwless Faceplate, White PJS264W 4 Gang Screwless Faceplate, White PJS265W 5 Gang Screwless Faceplate, White *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. WaveLinx Colors available W White V Ivory B Black R Red G Gray A Light Almond Index Page2/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 3 December 2024 Product Specifications Mechanical Size: 4.2”H x 1.8”W x 1.5”D (107mm x 45mm x 39mm) Environment: • Operating temperature: 32°F to 113°F (0°C to 45°C) • Storage temperature: 32°F to 167°F ( 0°C to 75°C) • Relative humidity operating: 5% to 95% non-condensing • For indoor use only Mounting: Standard single or multi-gang NEMA wall box, and compatible with a decorator wall plate (not included) Colors: White, Ivory, Gray, Light Almond, Black and Red Electrical Power supply type: Utilizes two (2) CR123A alkaline batteries (included) Hardware Specifications Status Indicators: • Single indicator LED • LED functionality (active for 3 seconds after action) • Indication of wireless network join request • Indication of wireless network connection • Scene indication of operations Button Configuration: • 1 Button • 3 Button • 3 Button with Raise / Lower • 5 Button with Raise / Lower Software Specifications • Each button programmable to trigger or toggle Scene or Zone • Default values when joined to an area via WaveLinx Mobile application • Models available with dominant button 50% light level • Fade rates and scene transitions are programmable Wireless Specifications Radio: 2.4GHz Standard: IEEE 802.15.4 Transmitter Power: + 7dBm Configuration type: Router, End Point Range: 100ft (30m) LOS through 2 interior walls of standard construction Note: Use of metallic wall plates is not recommended as they may interfere with the wireless signals System Performance Maximum number of Devices: 200 per WaveLinx Area Controller (best practice 150 devices) Standards/Ratings* • FCC Part 15, Subpart B & C • Meets latest ASHRAE Standard 90.1 requirements • Meets latest IECC requirements • Meets latest CEC Title 24 requirements • NEMA WD-7 and NEMA 4 compliant • CA Title 20 and Prop 65 compliant • RoHS Warning • This product is not intended to be used in applications involving the use of ammonia-based or VOC cleaners. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • For detailed cleaning guidelines please refer to: Controls Care and Maintenance instructions at the end of this document. Warranty Five year warranty standard WWB1-W Raise / Lower / OFF buttons Button programming options via WaveLinxMobile Application Scene Selection Zone Level Raise Level Lower Level Toggle Scene or Zone Level No Action Raise Area light level Lowers Area light level Turns all lights in area ON / OFF Default engraving & light levels Button 1 Scene 3 = 50% Button 2 Scene 1 = 100% Button 3 Scene 2 = 70% Button 4 Scene 4 = 30% Raise press* Increase 1% (per press) hold* Increase 15% (per sec) Lower press* Decrease 1% (per press) hold* Decrease 15% (per sec) Power* Toggle Scene 3 (50%) & Scene 0 (Off) * - affects last button press (OR last selected) command within the area Standard button engraving for each wallstation 1 2 1 2 1 2 3 4 WWB3-W WWB3-RL-W WWB5-RL-W *T24 and RoHS are self-tested by Cooper Lighting Solutions. Not a third party certification. Download the WaveLinx Mobile Application from either the Google Play or Apple Store® WaveLinx Index Page3/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 4 December 2024 Installation Wall plate not included Dimensional Details Mounting Height 48” / 1210mm 58” / 1470mm 1.3"[32mm]1.8"[45mm] 1.5"[36mm] 4.2"[107mm]4.2"[107mm] 1 2 WaveLinx Index Page4/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 PRO Battery-Powered Wallstation PS503258EN page 5 December 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com © 2024 Cooper Lighting SolutionsAll Rights Reserved. Specifications and dimensions subject to change without notice. View WaveLinx Network and IT Guidance Technical Guide Control Systems • WaveLinx Touchscreen Firewall PRO WaveLinx CAT WaveLinx 1 2 3 4 COREWaveLinx Wired & Wireless Same set of tools and features Ceiling SensorRelay Switchpack Controlled Receptacle RTLS Tag Integrated Outdoor Fixtures Integrated Ambient Fixtures Wallstation (AC or Battery) WirelessWired Tilemount Sensor Relay Switchpack with Contact Closure Input Integrated Industrial Fixtures Area Hub KEY Ethernet (IEEE 802.3) WaveLinx CAT (CAT5) Bluetooth (IEEE 802.15.1) WaveLinx PRO (IEEE 802.15.4) WiFi (IEEE 802.11) Ceiling Sensor Contact Closure or Sensor Interface Wallstation Dimming Switchpack or Emergency Switchpack BACnet Router PoE Power Building Automation System Area Controller Access Point WaveLinx Mobile App Smart Spaces Apps CORE Insights on Cloud CORE Pro on-prem enterprise management software CORE Admin CORE Lighting CORE Locate CORE Insights Networked Relay Panel System Diagram: This diagram shows the main components of the WaveLinx connected lighting system with CAT and PRO devices. The PRO devices communicate using wireless mesh technology based on the IEEE 802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network. The CAT devices communicate over the category 5 based communication bus and control the light fixtures using a relay (on/off) and 0-10V output (dim/raise). WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the Ethernet network. WaveLinx Index Page5/6Submitted On: May 20, 2025 Submitted by Sea-Tac Lighting & Controls, LLC Job Name: Renton Market and Piazza Catalog Number: WWB5-RL-W Notes: Type: SEATAC-WWA25-207407 SA50317022 April 2024 Cooper Lighting Solutions1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.comFor service or technical assistance:1-800-553-3879 Canada Sales 5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172 © 2024 Cooper Lighting SolutionsAll Rights Reserved. Product availability, specifications, and compliances are subject to change without notice. This product is not intended for use in applications involving the use of ammonia-based or VOC cleaners. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. WARNING image for reference only Cooper Lighting SolutionsControls Care & Maintenance Cooper Lighting Solutions has developed recommended guidelines for cleaning our products that will not impact the operation or finish of the product. Recommended cleaning tips: • Never spray any fluids directly into the device. • Use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace. • Use a damp rag or single-use wipe to avoid excess liquid penetrating the device. • Be sure to wipe up remaining excess liquid after cleaning. • Ensure the cleaning agent used does not have harsh chemicals such as bleach, ammonia, highly alkaline or concentrated acids (such as hydrochloric acid that can be found inhousehold cleaners such as toilet bowl cleaners, bathroom tile and porcelain cleaners) as they could damage the device, causing them to become brittle and discolored. • Cooper Lighting Solutions recommends the use of a mild liquid detergent and water to clean the devices. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however the single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. Recommended cleaning instructions: • Never spray any fluids directly into the device. • Apply the mild liquid detergent to a damp cloth or paper towel. Single use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however single-use wipes cannot contain bleach, ammonia, highly alkaline or concentrated acids. • If excess liquid is present, remove by wringing out the cloth or paper towel to avoid liquid penetration into the device. • Clean the Cooper Lighting Solutions device by wiping over the surface with the damp cloth. • Remove an excess liquid remaining on the device with a dry cloth or paper towel. Index Page6/6Submitted On: May 20, 2025