HomeMy WebLinkAbout141.1NOTES:
1. RECTANGULAR RAPID FLASH BEACON (RRFB) LIGHT BARS, POLE MOUNTED CABINETS, AND CONTROLLER EQUIPMENT SHALL BE MODEL
SC315-G, BY CARMANAH OR APPROVED EQUAL. SEE MANUFACTURER'S INSTALLATION GUIDE FOR INSTALLATION DETAILS. EACH POLE
SHALL BE EQUIPPED WITH A POLE MOUNTED CABINET. AC POWER SHALL BE USED UNLESS OTHERWISE APPROVED BY CITY.
2. PEDESTRIAN PUSH BUTTON LOCATION AND ORIENTATION SHALL FOLLOW PROWAG ADA GUIDELINES. PEDESTRIAN PUSHBUTTON AND
SIGN ASSEMBLY SHALL BE BY POLARA OR APPROVED EQUAL. PEDESTRIAN PUSH BUTTONS SHALL BE iNX, YELLOW BODY WITH R10-25 (9"
x 12") SIGN. SEE MANUFACTURER'S INSTALLATION GUIDE FOR INSTALLATION DETAILS.
3. SEE STD PLANS 141.2, 141.3, & 141.5 FOR FOUNDATION DETAILS. FOUNDATIONS SHALL BE POURED AGAINST UNDISTURBED EARTH,
SONOTUBES ARE PROHIBITED. ANCHOR BOLTS SHALL BE BY PELCO OR APPROVED EQUAL. ANCHOR BOLTS SHALL BE AP-1095-GLV,
ANCHOR BOLT CAGE WITH HARDWARE, 3/4"-10 x 18" BOLTS, 36" REBAR, 13" BOLT CIRCLE, AND GALVANIZED.
4. WARNING SIGNS SHALL HAVE FLUORESCENT YELLOW-GREEN BACKGROUND WITH BLACK LEGEND, SIGN SIZES SHALL BE PER THE MANUAL
ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
5. SEE STD PLAN 141.4 FOR BASE ASSEMBLY DETAILS. BASE ASSEMBLY, POLE, AND POLE CAP SHALL BE BY PELCO OR APPROVED EQUAL.
POLE BASE SHALL BE PB-5334, 13-3/4" x 13-3/4" x 15" ALUMINUM SQUARE BASE ASSEMBLY, WITH ALUMINUM DOOR, NO LOGO, 1 HEX BOLT,
GROUNDING LUG, 12" MINIMUM TO 14.5" MAXIMUM BOLT CIRCLE, AND PROCESS NO COLOR. POLE SHALL BE PB-5102, 4" 8 NPT SCHEDULE
80, SPUN ALUMINUM, 14' LENGTH, AND PROCESS NO COLOR. POLE CAP SHALL BE PB-5401 ACORN TYPE, ALUMINUM, 4-1/2" O.D. WITH
STAINLESS STEEL FASTENERS.
6. AC POWERED RRFBS SHALL BE EQUIPPED POLE CAPS. SOLAR POWERED RRFBS SHALL OMIT POLE CAPS AND SHALL BE EQUIPPED WITH
POST TOP SOLAR PANEL. SOLAR PANELS SHALL BE SIZED FOR LOCATION AND ORIENTED SOUTH. FOUNDATIONS FOR SOLAR POWERED
RRFBS SHALL BE SIZED TO SUPPORT SOLAR PANEL.
7. ALL POLES, INCLUDING POLES LOCATED IN THE MEDIAN, SHALL BE EQUIPPED WITH W11-2 (S1-1), W16-7p WARNING SIGNS, AND LIGHT BARS
ON BOTH SIDES OF THE POLE, DOUBLE SIDED. HOWEVER, ON ROADS WITH POLES LOCATED IN THE MEDIAN, POLES OUTSIDE OF THE
MEDIAN ISLAND MAY BE EQUIPPED WITH W11-2 (S1-1), W16-7p WARNING SIGNS, AND LIGHT BARS ON ONE SIDE, SINGLE SIDED.
8. SIGNS SHALL BE INSTALLED ON METAL POLE WITH BANDING PER STD PLAN 129.
14
'
-
0
"
SEE NOTE 3
3'
-
6
"
7'
-
0
"
M
I
N
.
C
L
E
A
R
A
N
C
E
PEDESTRIAN PUSH
BUTTON AND SIGN
ASSEMBLY, SEE NOTE 2
14'-0" POLE , SEE NOTE 5
W16-7p (LEFT OR RIGHT)
DOWNWARD DIAGONAL
ARROW PLAQUE, SEE
NOTE 4
W11-2 PEDESTRIAN
SIGN SHOWN. FOR
SCHOOL
CROSSWALKS USE
S1-1 SCHOOL SIGN,
SEE NOTE 4
POLE CAP, SEE
NOTE 5
RECTANGULAR
RAPID FLASHING
BEACON LIGHT BAR
WITH PEDESTRIAN
CONFIRMATION
LIGHT(S), SEE NOTE 1
POLE MOUNTED
CONTROLLER
CABINET, SEE NOTE 1
3"
M
A
X
.
3"
M
A
X
.
W11-501 (12" x 12")
CROSS TRAFFIC MAY
NOT STOP USE CAUTION
WHEN CROSSING SIGN.
MATCH PUSH BUTTON
ORIENTATION.
SEE DETAIL, THIS SHEET
SQUARE BASE ASSEMBLY,
SEE NOTE 5
W11-501
(12" x 12")
PEDESTRIAN SYMBOL HEIGHT - 4" (IN)
BICYCLE SYMBOL HEIGHT - 3" (IN)
LETTERS - 1" C SERIES
LEGEND - BLACK
BACKGROUND - FLUORESCENT
YELLOW-GREEN
Docusign Envelope ID: CAEEA226-F133-431A-9622-23AB6EE84358
4/14/2025 | 4:44 PM PDT