HomeMy WebLinkAboutAP_KROHNE__en_PED_110430__ to 's
y
eg1 s er
EC CERTIFICATE OF CONFORMITY
In accordance with the requirements of the Pressure Equipment
Directive 97/23/EC and the Pressure Equipment Regulations 1999,
UK Statutory Instrument 1999 No. 2001 and SI 2002 No. 1267
This is to certify that the Quality Management System of:
KROH N E Altometer
Dordrecht, The Netherlands
production facility of
KROHNE AG
Basel, Switzerland
has been assessed against the requirements of Annex III, Module H of the Pressure
Equipment Directive 97/23/EC, and Schedule 4, Module H of the Pressure Equipment
Regulations 1999 and conforms to the requirements for the products shown below:
Design and manufacture of electromagnetic
and ultrasonic flowmeters.
Approval is subject to the continued maintenance of the quality system in accordance
with the requirements of the above Directive and Regulations.
Authorisation is hereby given to use the LRV Notified Body Identification Number in
accordance with the requirements of the specified Directive and Regulations in relation
to the products as identified above.
Certificate No: 0038/PED/RQA/659300
Original Approval: 1 May 2002
Current Certificate: 23 April 2010
Certificate Expiry: 30 April 2011
LRV Notified Body Number 0038
J.A.C. van Rijn on behalf of Lloyd's Regi r Verification
Lloyd's Register Verification Limited,71 Fenchurch Street London EC3M 4B
Lloyd's Register,its affiliates and subsidiaries and their respectve officers,employees or agents are,individually and collectively,referred to in this clause as the'Lloyd's Register
Group'.The Lloyd's Register Group assumes no responsibility and shall not be liable to any person for any loss,damage or expense caused by reliance on the information or
advice in this document or howsoever provided,unless that person has signed a contract with the relevant Lloyd's Register Group entity for the provision of this information or
advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
A.5.13.8