The URL can be used to link to this page

Home My WebLink AboutAP_OPTIFLUX 2000__en_NSF PP liner___ 0 NSF International 04/28/2008 MR. JAN DEN UIL KROHNE ALTOMETER P.O. BOX 110 3300 AC, DORDRECHT THE NETHERLANDS Subject: Revised Authorized Registered Formulation for Standard 61 Enclosed is a copy of your revised Authorized Registered Formulation. This complete formulation (original copy with blue watermark) must be retained and on file at the identified plant location for review by an NSF Field Representative, conducting the annual/follow-up audits. Please forward the Authorized Registered Formulation to the appropriate plant. Each product is identified by Document Control Code (DCC number) located in the upper left hand corner of the each page. All previous and now outdated Authorized Registered Formulations for your products are to be destroyed and replaced with the enclosed revisions. The NSF audit of your plant, including materials/process verification and product sampling, will be guided by this formulation. Failure to maintain this information at the plant may require special follow-up audits or result in removal of products from Listing. Only those specific material/ingredients and use levels indicated in the Authorized Registered Formulation are authorized for use in the Certified Product. To obtain authorization for an alternate supplier (or other modification) please contact your Certification Project Manager at 1-800-NSF-MARK to request the appropriate forms. For customers outside the USA, please use 1-734-769-8010 and ask for your Certification Project Manager. As a reminder, you are not permitted to make any formulation changes to NSF Certified products without prior written approval from NSF. If you have any questions about the Authorized Registered Formulation, please contact your Certification Project Manager indicated below. Enclosure: Authorized Registered Formulation Certification Project Manager: SARAH WAGSCHAL, swagschal@nsf.org Plant: OK811 DCC: PM06331 789 N. Dixboro Road,Ann Arbor, Michigan 48105-9723 USA 1-800-NSF-MARK 734-769-8010 www.ns£org DCC: PM06331 Date:04/28/2008 NSF/ANSI Standard 61 - Drinking Water System Components- Health Effects Authorized Registered Formulation This product may require additional evaluation or testing prior to authorization for Listing.Only products included in NSF's Official Listing are NSF Certified and authorized to bear an NSF Certification Mark. Reason For Revision: Project#9024408-TR01:Updated trade names,size ranges and format,and updated notes. Customer Name: KROHNE ALTOMETER Facility Location: THE NETHERLANDS Customer Number: OK810 Facility At: DORDRECHT,THE NETHERLANDS Facility Number: OK811 Trade Name(s) Function(s) Size Optiflux 2000 F+IFC 010W Water Meters DN25-DN150/ 1 -6in Optiflux 2000 F+IFC 070 F Water Meters DN50-DN150/ 2-6in Optiflux 2000 F+IFC 100 W Water Meters DN25-DN150/ 1 -6in Optiflux 2000 F+IFC 300 F Water Meters DN25-DN150/ 1 -6in Optiflux 2000 F+IFC 300 R Water Meters DN25-DN150/ 1 -6in Optiflux 2000 F+IFC 300 W Water Meters DN25-DN150/ 1 -6in Optiflux 2010 C Water Meters DN25-DN150/ 1 -6in Optiflux 2070 C Water Meters DN50-DN150/ 2-6in Optiflux 2100 C Water Meters DN25-DN150/ 1 -6in Optiflux 2300 C Water Meters DN25-DN150/ 1 -6in Listing Notes Certified product contains Hastelloy C-22, Hastelloy C-4 or Stainless Steel 1.4571 electrodes and a polypropylene liner. Category: MECH,SECTION 8-MECHANICAL DEVICES Material Type: Multiple Water Contact Materials(MLTPL) Temperature: Cold(73 F/23 C) Auditor Notes For metal alloy components indicated on the wetted parts list as supplied by Any Supplier only,alternate suppliers are acceptable if a metallurgical analysis specific for the alloy is available for review from each source.The auditor is required to verify that copies of metal certification statements are kept on file and the standard alloy designation from each supplier matches that noted on the wetted parts list. Please complete a sample disclosure form and send to NSF International's confidential and secure fax at 734-827-7728. Include a photocopy of the Authorized Registered Formulation designating the components used to make the sample submitted for testing(circle or underline the alternate used). Sample Notes Please collect(10)DN 80 Optiflux meters of any model. Samples maybe submitted without the converter. Miscellaneous Note Bracketing Justification: There are two models of Optiflux,a compact version(C)and a field version(F).The compact version has the digital converter housing directly 1 DCC: PM06331 Date:04/28/2008 mounted on the sensor.The field version has a separate digital converter housing mounted at a certain distance from the sensor.The actual wetted parts of both meters are identical in size and composition. 2 Original E E;fi;L!meiits,bear a fight bkie NSF FVJP- ii, DCC: PM06331 Date: 04/28/2008 Wetted Parts List Customer Name: KROHNE ALTOMETER Facility Location: THE NETHERLANDS Customer Number: OK810 Facility At: DORDRECHT,THE NETHERLANDS Facility Number: OK811 Part Trade Name Supplier Formulator Footnotes DCC Date of Acceptance PULYPHOPYLENE R 67727 HASTELLOY C4 ANY SUPPLIER IA10807 03/25/2008 HASTELLOY C-22 ANY SUPPLIER IA09075 03/25/2008 1.4571 STAINLESS STEEL ANY SUPPLIER IA10618 03/25/2008 Notes Definitions of Terminology used in this Document: Trade name:The name given to the ingredient,material or assembly by the company that makes the product. Supplier: The name of the company that provides an ingredient, material or assembly directly to the company that makes the product covered by this registration. The supplier could be a formulator,distributor,fabricator,molder,extruder,mixer,manufacturer or assembler. Formulator: The name of the company that prepares a material according to a formula.The formulator and the supplier could be the same company. This field may be blank as this information is only reported when the information is not confidential. In plant assemblies, compounding and mixing: Components of assemblies, materials (formulated or compounded) or ingredients which are manufactured at this facility are included on subsequent pages of this document. THIS IS THE LAST PAGE OF THIS DOCUMENT 3