HomeMy WebLinkAboutAP_OPTIFLUX 2100-OPTIFLUX 4100_C_en_IECEx_110824__ a IECEx Certificate
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rule-,and dotaO.of the II:Ux Schmmn visit www.lecex.win
Certificate No,: IECEx KEM 09.0073X Issuo No.:1 Certificate history:
Issuo No 1 (2011-8-24)
Status: Currant Issue No.0(2010.1-18)
Date of Issue: 2011-08.24 Pape 1 of 4
Applicant: Krohne Altometer
Kerkeplaal 12
3313 1 C Dordrecht
The Netherlands
Eloctncal Apparatus: Compact Electromagnetic Flowrneter,Typo OPTIFLUX 2100 C and typo OPTII LUX 4100
C
Optional accessory
Type of Protection' d,a,mb,la,tD
Marking: Ex u In mb IIC T4
Ex doIa nib IICT4
Ex tD A21 IP64 T120"C
Approved for Issue on behalf of the IECEx C.G.van Es
Curtificntion Body:
Position, Certibc 1 1 rnager
Signature:
(for printed version)
Date: l
1 This certificate and schadule may only be reproduced in full.
2.This certificate Is not transferable and remains the property of the lssulng body.
3.The Stntun,and authnnticlty of this certificate may be verified by visiting the Official IECEx Wnhnrtn.
Certificate Issued by.
DEKRA Cortiflcation B.V.
Utio(hlseweg 310
6912 AR Arnhem I, D E K RA
1 ha Netherlands
All tasting,Innpoctlon,auditing and certification activities of the
former KEMA Quality are an Intogrnl part of the DEKRA
Certification Group.
a� IECEx Certificate
of Conformity
Certificalo No.: IF CFx KI-M 09 0073X
Date of Issue: 2011-08-24 ls!aw No.: 1
of•3
ManufaChiror. Krohne Altometer
Kerkeplaat 12
3313 t C Dordrecht
The Netherlands
Manufacturing location(%);
Krohne Alternator
Kerkeplaat 12
3313 LC Dordrecht
The Netherlands
This certificate Is Issued as verification that n sample(s),representative of production,was assessed and tested and
found to comply with the IEC Standard list below and that the manufacturer's quality system,relating to the Ex products
covered by this certificate,was assessed and found to comply with the IECEx Quality system requirements.This
certificate Is granted subject to the conditions ns sot out In IECEx Scheme Rules, IECEx 02 and Operationul Documents
as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it xpecifiod in tho schoditle of this certificate and the Identified
documents,was found to comply with the following standards:
IEC 60079-0 ; 2004 ElRctrir:al apparatus for oxplosive gas atmospheres-Part 0: General requirements
IEC 60079.1 : 2007-04 Explosive alinosphures-Part 1:Equipmont protection by flnmaproof onclosurns"d"
Edition G
IEC 60079-11 : 2006 Fxplosivo atmospheres-Part 11: Equipment protection by intrinsic safety"i"
Edition:6
IEC 60079-18 : 2004 Electrical apparatus for explo%ive gns nlmosphores-Part 18:Construction,test and
Edition:7 o marking of type of protection encapsulation'm'alectrical apparatus
IEC 60079-7 : 2006.07 Explosive atmospheres-Part 7:Equipment protection by increwwd safely"o"
Lditiun.4
IEC 61241-0 : 2004 Electrical apparatus for use In the presence of combustible dust-Part 0: General
F(Iilion: 1 requirements
IEC 61241.1 : 2004 Electrical apparatus for use in the presence of combustible dust-Part 1: Protection by
Edition: 1 onclosures"C'
This Certiticatu does not indicate compliance with electricnl snfoty and portormanco roquiromonts other than those
expressly included in the Standards listed above.
TEST&ASSESSMENT REPORTS:
A snmploO of tho oqulpmont listed has successfully met the examination and lust roquirurnunts as rucordud in
Test Report:
NL/KEM/ExTR09.0060100 N LIKE WExTR09.0069/01
Quality Assossmont Reoort
NI/KFM/QAR09.0012/01
ovi
IECEx Certificate
of Conformity
Certificate No.: IECEx KEM 09.0073X
Data of Issue: 2011.08.24 Issue No.: 1
Page 3 of 4
Schedule
EQUIPMENT:
Epuipn,ord and sysfums covorod by this corflllcato are as follows
The Compact Electromagnetic Flowmeter,Type OPTIFLUX 2100 C and Typo OPTIFLUX 4100 C is used for measuring,
counlin0 and dirsplayying the linaar flow of an electrically conductive liquid.
The flowmeter consists of an aluminiurn signal converter housing containing the electronics and a steel primary head.
Sun Annex 1 for furthar dotails,
CONDITIONS OF CERTIFICATION: YES as shown bolow:
-The relation between arnbwnl trmpurrlure and maximum process temperature shall be taken born the table.
-The property class of the special fasteners of the Ex d primary heads shall be at least A'-70
- For details of the flameproof Joint between the Ex d primary head and the cubic fnadthrough the mnnufnclurer shall he
contacted.
IECEx Certificate
of Conformity
Certificato No IECEx KEM O9.0073X
Date of Issue: 2011.08.24 ISSUo No.: 1
Page 4 of 4
DETAILS OF CERTIFICATE CHANGES(for issucs 1 and abovo):
Increase of the maxirnum umbient temperature to+65 T,
The relation butwuon arrmbiont tompornturn and maximum process temperature is shown in the following table:
Max.process tnmporaturo Tp
Tu .40"C Ta sDG°C
120"C 56°C
Annexe: IECEx Kl:M 09 0013X, 1-Annnxl.pdf
DEKRA
Annex 1 to Certificate of Conformity IECEx KEM 09.0073X, issue 1
Description
The Compact Electromagnetic Flowmeter, Type OPTIFLUX 2100 C and Type OPTIFLUX 4100 C is used
for measuring, counting and displaying the linear flow of an electrically conductive liquid.
The flowmeter consists of an aluminium signal converter housing containing the electronics and a stool
primary head.
The signal converter housing with electronics Is In typo of protection increased safety "e", encapsulation
"mb"and intrinsic safety"I".
The type of protection for the various sizes of the Integral primary heads Is as follows:
DN10 - DN20: encapsulation "mb"(field coils)and Increased safety"a"(field coil wiring)or
DN25- DN150: flameproof enclosures "d"(field coils and field coil wiring)or
DN200 - DN3000: Increased safety"e"(field coils and field coil wiring).
The electrodes are in type of protection intrinsic safety"I".
Ambient temperature range: -20 "C to +55 "C.
The relation between ambient temperature and maximum process temperature is shown in the following
table:
Max. process temperature Tp
Ta 540 "C Ta 555°C
120 °C 55 "C
The degree of protection of the apparatus enclosure is at least IP64 according to IEC 60529.
Electrical data
Power supply ...................................... U„ ■ 100 -230 Vac, +10 % / -15 %, 8 VA rosp.
(terminals L, N or L+, L-) U„ = 24 Vdc, +30 %/-25 %, 4 W
U„ 0 24 Vac, +10 % /-15 %, 8 VA
U„, ■ 253 V
Current output ..................................... U„ 5 32 Vdc, passive or active, 4 .20 mA, HART
(terminals A+, A. A-) U„, = 253 V
Status/Pulse/ Frequency output ....... U„ S 32 Vdc, 1 -.50 mA
(terminals C+, C. D+, D. S) U„, = 253 V
Display and electrode circuit ................. in typo of protection intrinsic safety Ex la IIC
(Internal circuit)
The Intrinsically safe electrode circuit and the Intrinsically safe display circuit are galvanically connected
with each other and with the non-intrinsically safe field coil circuit, These three circuits are Infallibly
galvanically Isolated from all other non-intrinsically safe circuits to a peak value of the nominal voltage of
375 V.
Page I of I
Form 124
Version 1(2011.02)
DRKRA Comincation B V. Uircchtecweµ 310,6812 AR Arnhem P.U.Box 3185,6802 ED Aialicrn Y'hc Netherlands
1'+31 26 3 56 20 00 F f 31 20 3 52 58 00 wwwAckra-certtllcauon.com Registered Arrnhcm 09085396