HomeMy WebLinkAboutAP_OPTIFLUX 6000__en_3A_111231__ Initially Issued: 7/18/2002 Authorization No.: 1203
This Is To Certify That
KROHNE Altometer
PO Box 110, 3300 AC Dordrecht, THE NETHERLANDS
Is hereby authorized to continue to apply the 3-A Symbol to the models of equipment,
conforming to 3-A Sanitary Standards for:
Flow Meters,Number: 28-04, set forth below:
Model Designations: OPTIFLUX 6000 Series in sizes: 1/10" (DN 2.5), 1/8"(DN 4),
1/4" (DN 6), 3/8" (DN 10), 1/2" (DN 15), 1" (DN 25), 1-1/2" (DN 40), 2" (DN 50),
2-1/2" (DN 65), 3" (DN 80), 4" (DN 100), 5" (DN 125), and 6" (DN 150).
Valid through: December 31, 2011
Executive Director, 3-A Sanitary Standards, Inc.
The issuance of this authorization for the use of the 3-A Symbol is based upon the
voluntary certification, by the applicant for it, that the equipment listed above complies
fully with the 3-A Sanitary Standards designated. Legal responsibility for compliance is
solely that of the holder of this Certificate of Authorization, and 3-A Sanitary Standards,
Inc. does not warrant that the holder of an authorization at all times complies with the
provisions of the said 3-A Sanitary Standards. This in no way affects the responsibility
of 3-A Sanitary Standards, Inc. to take appropriate action in such cases in which evidence
of nonconformance has been established.
Next TPV Inspection/Report due: July 2014