The URL can be used to link to this page

Home My WebLink AboutAP_WATERFLUX 3070__en_OIML R49-1 R00+R01_100409__ NMI OIML Certificate NO R49-1/2006-NL1-09.01 OIML Member state Project number 812577 The Netherlands Page 1 of 5 OIML CERTIFICATE OF CONFORMITY Issuing authority Name: NMi Certin B.V. Address: Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands Applicant Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Manufacturer of the certified type Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Identification of certified type Type: WATERFLUX Water meter intended for the metering of cold potable water and hot water, model "WATERFLUX", class 1 and 2. Further characteristics: see page 3. TI lit This document is issued under the provision that no liability is in NMI Certin BV accepted and that the applicant shall indemnify third-party Hugo de Grootplein 1,3314 EG Dordrecht liability. C N\, R' PO Box 394,3300 AJ Dordrecht,NL Tf T+31 78 6332332 Reproduction of the complete document is permitted. I IY S I ECTI O bt F+31 78 6332309 The notification of NMi Certin as Issuing Authority can be 7 certin@nmi.nl verified at wvvw.oimi.org.ww R VA ( L 7 L vv .nmi.nl Mi OIML Certificate NO R49-1/2006-NL1-09.01 Project number 812577 Page 2 of 5 This Certificate attests the conformity of the above identified type (represented by the sample or samples identified in the associated Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): R49-1/2006 (E): Metrological and technical requirements R49-2/2006 (E): Test methods R49-3/2006 (E): Test Report format This Certificate relates only to the metrological and technical characteristics of the type of instrument covered by the relevant OIML Recommendation identified above. This Certificate does not bestow any form of legal international approval. The conformity was established by the results of tests and examinations provided in the associated Test Report: - No. R4 1/2006-NL1-09.01 that includes 41 pages and 14 annexes. The Issui g Authority NI-1 NMi Ce i ptember 2009 C. ste n ad Certification Board Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated Test Report is not permitted, although either may be reproduced in full. M1 OIML Certificate NO R49-1/2006-NL1-09.01 Project number 812577 Page 3 of 5 Identification of the certified pattern—continued from page 1 Water meter intended for metering cold potable water and hot water, based on a electromagnetic principle, designed to measure reverse flow, with straight inlet and outlet length, with no flow conditioner and equipped with an electronic calculating/indicating device. Metrological characteristics: Type: WATERFLUX Meter size DN65 DN80 DN80 DN100 DN100 DN125 DN125 DN150 DN750 DN200 Minimum flow rate 0,40 0,63 0,64 1,0 1,0 1,56 1,60 2,50 2,52 3,94 Q1 (m3/h) Transitional flow 0,64 1,00 1,02 1,6 1,6 2,50 2,56 4,00 4,03 6,30 rate Q2(m3/h) Permanent flow rate Q3(m3/h) 100 100 160 160 250 250 400 400 630 630 Overload flow rate 125 125 200 200 312,5 312,5 500 500 787,5 787,5 Q4(m3/h) Nominal diameter 65 80 80 100 100 125 125 150 150 200 (mm) Accuracy Class 1 Maximum admissible pressure 10 (bar) Min/max admissible 0,1/50 temperature(°C) Indicating range(m3)n1 99,999 999,999 9.999,999 Verification scale interval(m3) 0,0001 0,001 0,001 Orientation All positions Environmental class C Power supply Type Battery Ubattery 3,6 M1 OIML Certificate N° R49-1/2006-NL1-09.01 Project number 812577 Page 4 of 5 Meter size DN50 DN50 DN65 DN65 DN80 DN80 DN100 DN100 Minimum flow rate Q1 (m3/h) 0,100 0,158 0,160 0,250 0,25 0,40 0,40 0,63 Transitional flow rate Q2(m3/h) 0,160 0,252 0,25 0,40 0,40 0,64 0,64 1,00 Permanent flow rate Q3(m3/h) 40 63 63 100 100 160 160 250 Overload flow rate Q4(m3/h) 50 78,75 78,80 125 125 200 200 312,5 Nominal diameter(mm) 50 50 65 65 80 80 100 100 Accuracy Class 2 Maximum admissible pressure 10 (bar) Min/max admissible temperature 0,1/50 (°C) Indicating range(m3) 99,999 999,999 Verification scale interval(m3) 0,0001 0,001 Orientation All positions Environmental class C Power supply Battery Type 3,6 Ubattery Mi OIML Certificate NO R49-1/2006-NL1-09.01 Project number 812577 Page 5 of 5 Meter size DN125 DN125 DN150 DN150 DN200 Minimum flow rate Q1 (m3/h) 0,63 1,00 1,00 1,58 1,58 Transitional flow rate Q2(m3/h) 1,00 1,60 1,60 2,52 2,52 Permanent flow rate Q3(m3/h) 250 400 400 630 630 Overload flow rate Q4(m3/h) 312,5 500 500 787,5 787,5 Nominal diameter(mm) 125 125 150 150 200 Accuracy Class 2 Maximum admissible pressure 10 (bar) Min/max admissible temperature 0,1 /50 (°C) Indicating range(m3)�11 999,999 9.999,999 Verification scale interval(m3)[11 0,001 Orientation All positions Environmental class C Power supply Battery Type 3,6 U b.tWy MiC)N OIML Certificate NO R49-1/2006-NL1-10.01 OIML Member state Project number 9200759 The Netherlands Page 1 of 4 OIML CERTIFICATE OF CONFORMITY Issuing authority Name: NMi Certin B.V. Address: Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands Applicant Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Manufacturer of the certified type Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Identification of certified type Type: WATERFLUX Water meter intended for the metering of cold potable water and hot water, model "WATERFLUX", class 1 and 2. Further characteristics: see page 3. Tr lie This document is issued under the provision that no liability is in NMi Certin BV accepted and that the applicant shall indemnify third-party N\s, Hugo de Grootplein 1,3314 EG Dordrecht liability. Re PO Box 394,3300 AJ Dordrecht,NL T+31 78 6332332 Reproduction of the complete document is permitted. TF F+31 78 6332309 The notification of NM INSPECTION bfi Certin as Issuing Authority can be DR Certin@nmi.nl verified atwww.oiml.org. 11 VA T I 17 7 L L www.nmi.nl 0�+ _ Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 2 of 4 This Certificate attests the conformity of the above identified type (represented by the sample or samples identified in the associated Test Report)with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): R49-1/2006 (E): Metrological and technical requirements R49-2/2006 (E): Test methods R49-3/2006 (E): Test Report format This Certificate relates only to the metrological and technical characteristics of the type of instrument covered by the relevant OIML Recommendation identified above. This Certificate does not bestow any form of legal international approval. The conformity was established by the results of tests and examinations provided in the associated Test Report: - No. R49-1/2006-NL1-10.01 that includes 40 pages and 3 annexes. The lssu'!gg Authority NL1 NMi C i , 9 April 2010 C. os eCertification o tBoard Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated Test Report is not permitted, although either may be reproduced in full. Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 3 of 4 Identification of the certified pattern —continued from page 1 Water meter intended for metering cold potable water and hot water, based on a electromagnetic principle, designed to measure reverse flow, with straight inlet and outlet length, with no flow conditioner and equipped with an electronic calculating/indicating device. Metrological characteristics: Type: WATERFLUX Meter size DN250 DN300 Minimum flow rate Q1 (m3/h) 6,25 10 Transitional flow rate Q2 (m3/h) 10 16 Permanent flow rate Q3 (m3/h) 1000 1600 Overload flow rate Q4 (m3/h) 1250 2000 Nominal diameter(mm) 250 300 Accuracy Class 1 Maximum admissible pressure (bar) 10 Min/max admissible temperature (°C) 0,1 /50 Indicating range (m3) 9.999.999 Verification scale interval (m3) 0,001 Orientation All positions Environmental class C Power supply Type Battery Ubattery 3,6 V Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 4 of 4 Meter size DN25 DN40 DN250 DN300 Minimum flow rate Q1 (m3/h) 0,025 0,04 0,063 0,1 2,5 4 Transitional flow rate Q2 (m3/h) 0,04 0,064 0,1 0,16 4 6,4 Permanent flow rate Q3 (m3/h) 10 16 25 40 1000 1600 Overload flow rate Q4 (m3/h) 12,5 20 31,3 50 1250 2000 Nominal diameter(mm) 25 40 250 300 Accuracy Class 2 Maximum admissible pressure (bar) 10/ 16 10 Min/max admissible temperature (°C) 0,1 / 50 Indicating range (m3) 99.999 9.999.999 Verification scale interval (m3) 0,0001 0,001 Orientation All positions Environmental class C Power supply Type Battery Ubattery 3,6 V