Loading...
HomeMy WebLinkAboutAP_WATERFLUX 3070__en_OIML R49_100409__ MiC)N OIML Certificate NO R49-1/2006-NL1-10.01 OIML Member state Project number 9200759 The Netherlands Page 1 of 4 OIML CERTIFICATE OF CONFORMITY Issuing authority Name: NMi Certin B.V. Address: Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands Applicant Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Manufacturer of the certified type Name: KROHNE Altometer Address: Kerkeplaat 12 3313 LC Dordrecht The Netherlands Identification of certified type Type: WATERFLUX Water meter intended for the metering of cold potable water and hot water, model "WATERFLUX", class 1 and 2. Further characteristics: see page 3. Tr lie This document is issued under the provision that no liability is in NMi Certin BV accepted and that the applicant shall indemnify third-party N\s, Hugo de Grootplein 1,3314 EG Dordrecht liability. Re PO Box 394,3300 AJ Dordrecht,NL T+31 78 6332332 Reproduction of the complete document is permitted. TF F+31 78 6332309 The notification of NM INSPECTION bfi Certin as Issuing Authority can be DR Certin@nmi.nl verified atwww.oiml.org. 11 VA T I 17 7 L L www.nmi.nl 0�+ _ Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 2 of 4 This Certificate attests the conformity of the above identified type (represented by the sample or samples identified in the associated Test Report)with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): R49-1/2006 (E): Metrological and technical requirements R49-2/2006 (E): Test methods R49-3/2006 (E): Test Report format This Certificate relates only to the metrological and technical characteristics of the type of instrument covered by the relevant OIML Recommendation identified above. This Certificate does not bestow any form of legal international approval. The conformity was established by the results of tests and examinations provided in the associated Test Report: - No. R49-1/2006-NL1-10.01 that includes 40 pages and 3 annexes. The lssu'!gg Authority NL1 NMi C i , 9 April 2010 C. os eCertification o tBoard Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated Test Report is not permitted, although either may be reproduced in full. Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 3 of 4 Identification of the certified pattern —continued from page 1 Water meter intended for metering cold potable water and hot water, based on a electromagnetic principle, designed to measure reverse flow, with straight inlet and outlet length, with no flow conditioner and equipped with an electronic calculating/indicating device. Metrological characteristics: Type: WATERFLUX Meter size DN250 DN300 Minimum flow rate Q1 (m3/h) 6,25 10 Transitional flow rate Q2 (m3/h) 10 16 Permanent flow rate Q3 (m3/h) 1000 1600 Overload flow rate Q4 (m3/h) 1250 2000 Nominal diameter(mm) 250 300 Accuracy Class 1 Maximum admissible pressure (bar) 10 Min/max admissible temperature (°C) 0,1 /50 Indicating range (m3) 9.999.999 Verification scale interval (m3) 0,001 Orientation All positions Environmental class C Power supply Type Battery Ubattery 3,6 V Mi OIML Certificate NO R49-1/2006-NL1-10.01 Project number 9200759 Page 4 of 4 Meter size DN25 DN40 DN250 DN300 Minimum flow rate Q1 (m3/h) 0,025 0,04 0,063 0,1 2,5 4 Transitional flow rate Q2 (m3/h) 0,04 0,064 0,1 0,16 4 6,4 Permanent flow rate Q3 (m3/h) 10 16 25 40 1000 1600 Overload flow rate Q4 (m3/h) 12,5 20 31,3 50 1250 2000 Nominal diameter(mm) 25 40 250 300 Accuracy Class 2 Maximum admissible pressure (bar) 10/ 16 10 Min/max admissible temperature (°C) 0,1 / 50 Indicating range (m3) 99.999 9.999.999 Verification scale interval (m3) 0,0001 0,001 Orientation All positions Environmental class C Power supply Type Battery Ubattery 3,6 V