Loading...
HomeMy WebLinkAboutQS_OPTIPROBE__en__110117_7312252100_R01 t A0965f�� _mmW OPTIPROBE Quick Start The low-cost flow indicator ©KROHNE 01/2011-7312252100-QS OPTIPROBE R01 en KROHNE CONTENTS OPTIPROBE 1 Safety instructions 3 2 Installation 4 2.1 Notes on installation ........................................................................................................4 2.2 Scope of delivery...............................................................................................................4 2.3 Nameplate ........................................................................................................................ 5 2.4 Installation conditions......................................................................................................6 2.4.1 Inlet and outlet........................................................................................................................6 2.4.2 Mounting position....................................................................................................................6 2.4.3 T-section .................................................................................................................................7 2.4.4 Vibration..................................................................................................................................7 2.4.5 Magnetic field..........................................................................................................................8 2.4.6 Bends ......................................................................................................................................8 2.4.7 Open discharge .......................................................................................................................9 2.4.8 Control valve ...........................................................................................................................9 2.4.9 Pump.......................................................................................................................................9 2.4.10 Temperatures ..................................................................................................................... 10 3 Electrical connections 11 3.1 Safety instructions.......................................................................................................... 11 3.2 Connection diagram ....................................................................................................... 11 4 Notes 13 2 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en SAFETY INSTRUCTIONS 0 Warnings and symbols used QDANGER! This information refers to the immediate danger when working with electricity. DANGER! These warnings must be observed without fail. Even partial disregard of this warning can lead to serious health problems and even death. There is also the risk of seriously damaging the device or parts of the operator's plant. WARNardi A! Disregarding this safety warning, even if only in part,poses the risk of serious health problems. There is also the risk of damaging the device or parts of the operator's plant. CAUTION! Q° Disregarding these instructions can result in damage to the device or to parts of the operator's plant. a /NFORMA T/ON! These instructions contain important information for the handling of the device. HANDLING • This symbol designates all instructions for actions to be carried out by the operator in the specified sequence. RESULT This symbol refers to all important consequences of the previous actions. Safety instructions for the operator CAUTION! Installation, assembly, start-up and maintenance may only be performed by appropriately Q trained personnel. The regional occupational health and safety directives must always be observed. ® LEGAL NOTICE! The responsibility as to the suitability and intended use of this device rests solely with the user. The supplier assumes no responsibility in the event of improper use by the customer. Improper installation and operation may lead to loss of warranty. In addition, the "Terms and Conditions of Sale"apply which form the basis of the purchase contract. a /NFORMA T/ON! • Further information can be found on the supplied CD-ROM in the manual, on the data sheet, in special manuals, certificates and on the manufacturer's website. • Ifyou need to return the device to the manufacturer or supplier,please fill out the form contained on the CD-ROM and send it with the device. Unfortunately, the manufacturer cannot repair or inspect the device without the completed form. 01/2011 -7312252100-QS OPTIPROBE R01 en www.krohne.com 3 p INSTALLATION 2.1 Notes on installation a /NFORMA T/ON! Inspect the cartons carefully for damage or signs of rough handling. Report damage to the carrier and to the local office of the manufacturer. a /NFORMA T/ON! iCheck the packing list to check if you received completely all that you ordered. a /NFORMA T/ON! Look at the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate. 2.2 Scope of delivery The OPTIPROBE is available in two models. You receive the ordered version. (7 O 02 1� Model A,for fixed mounting with welded-on flange. 2� Model B,for mounting with variable insertion lengths. 4 www.krohne.com 01/2011 -7312252100-QS OPTIPROBE R01 en • � = INSTALLATION 77 o ® o 1Q OPTIPROBE,model A or B © Quick Start 03 Factory calibration certificate 2.3 Nameplate /NFORMA T/ON! Look at the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate. KR O H N E NIL 3313 LC Dordrecht 02 SIN:A1062874 (\ F\ Mfd.:2010 in the Netherlands O GKL:7.3317 f field-f line 16 Wetted Matrls:POM HC4 IP66 167 1� Name and address of the manufacturer. ® Type designation of the flowmeter and CE sign. (3 Calibration data. 01/2011-7312252100-QS OPTIPROBE R01 en www.krohne.com 5 INSTALLATION OPTIPROBE 2.4 Installation conditions 2.4.1 Inlet and outlet 10 Figure 2-1:Recommended inlet and outlet sections 1Q >_10 DN © >_5DN 2.4.2 Mounting position OO 40 —► O Figure 2-2:Mounting position 11) Flow profile must be fully developped. ® Welding instructions:the electrodes must point to the side of the pipeline! (3 Insert the OPTIPROBE perpendicular. 4� Insertion length>_25mm. © DN>_80mm. 6 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en INSTALLATION p A CAUTION! The OPTIPROBEis a sensor which measures flow speed atone point in the pipe. In case the flow speed has to be converted into a volume,please note that the measured value depends on the used diameter and the insertion length, because the OPTIPROBE decreases the inner surface of the pipe at the measuring section. The corrected GKl value for any other installation condition can be calculated as: 30 * insertion GKl = GKIcaL * (1 - Z 0.79 * DN All measures in mm GKI,,,is GKl on nameplate 2.4.3 T-section i 10 Figure 2-3:Distance after T-sections 1� >_30 DN 2.4.4 Vibration Figure 2-4:Avoid vibrations 01/2011 -7312252100-OS OPTIPROBE R01 en www.krohne.com 7 INSTALLATION OPTIPROBE 2.4.5 Magnetic field Figure 2-5:Avoid magnetic fields 2.4.6 Bends Figure 2-6:Installation in bending pipes Figure 2-7:Installation in bending pipes 8 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en INSTALLATION 2.4.7 Open discharge Figure 2-8:Installation before an open discharge 2.4.8 Control valve r t Figure 2-9:Installation before control valve 2.4.9 Pump 17 Figure 2-10:Installation after pump 01/2011-7312252100-QS OPTIPROBE R01 en www.krohne.com 9 INSTALLATION 2.4.10 Temperatures 10 1� Process temperature © Ambient temperature A CAUTION! Protect the device from direct sunlight. Temperature range [°c] [OF] min. max. min. max. Process temperature 0 100 32 212 Ambient temperature -30 55 -22 131 10 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en ■ ELECTRICAL CONNECTIONS p 3.1 Safety instructions DANGER! Allllwork on the electrical connections may only be carried out with the power disconnected. Take + note of the voltage data on the nameplate! QOA Observe Obseerve the national regulations for electrical installations! WARNING! without fail the local occupational health and safety regulations.Any work done on the ' electrical components of the measuring device may only be carried out by properly trained specialists. a /NFORMA T/ON! Look at the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate. 3.2 Connection diagram • The outer shield of the signal cable in the signal converter housing is connected via the strain relief terminal. • Bending radius of signal and field current cable: >_ 50 mm/2". • The following illustration is schematic. The positions of the electrical connection terminals may vary depending on the type of converter. 01/2011 -7312252100-OS OPTIPROBE R01 en www.krohne.com 11 p ELECTRICAL CONNECTIONS 4 �40�3O� 3 2 20 1 9 8 7 O (10) (60) O O O 02 03 <= O O L3L2 1 Figure 3-1:Connection diagram 1Q Electrical terminal compartment in housing of the signal converter for signal and field current cable. © Signal cable (3 Field current cable C 4Q Connection box for measuring sensor © Functional ground FE 12 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en NOTES A 01/2011-7312252100-QS OPTIPROBE R01 en www.krohne.com 13 NOTES OPTIPROBE 14 www.krohne.com 01/2011-7312252100-QS OPTIPROBE R01 en NOTES A 01/2011-7312252100-QS OPTIPROBE R01 en www.krohne.com 15 r� r . rti,y • •• M• • • •• AW to ri KROHNE product overview • Electromagnetic flowmeters • Variable area flowmeters • Ultrasonic flowmeters • Mass flowmeters • Vortex flowmeters • Flow controllers L 3 • Level meters m • Temperature meters a v • Pressure meters • Analysis products • Measuring systems for the oil and gas industry 0 w • Measuring systems for sea-going tankers m 0 a a 0 0 Head Office KROHNE Messtechnik GmbH N N Ludwig-Krohne-Str. 5 D-47058 Duisburg (Germany) 0 Tel.:+49 (0)203 301 0 0 Fax:+49 (0)203 301 10389 Z infofdkrohne.de & The current list of all KROHNE contacts and addresses can be found at: KROHNE Y o www.krohne.com