The URL can be used to link to this page

Home My WebLink AboutTSI #4 PVC Conduit State Department of Transportation I I I I I I I Request for Approval of Material Contract Number FA Number SR Date Section / Title of Project County Contractor Subcontractor This form shall be completed prior to submittal. If this form is not complete at time of submittal it may be returned for information that was omitted. PE Use Bid Item and Sub-Item No. Material Type, Product Name & Model Number Name and Location of Fabricator, Manufacturer or Pit Number Specification Reference For WSDOT Use Only RAM # Unifier Submittal # PE/QPL Code Hdqtr./QPL Code HQ Use Project Engineer/Representative Date State Materials Engineer/Representative Date Acceptance Action Codes for use by Project Engineer and State Materials Laboratory 1. Acceptance Criteria: Acceptance based upon “Satisfactory” Test Report for samples of materials to be incorporated into project. 2. Acceptance Criteria: Mfg. Cert. of Compliance for ‘Acceptance’ prior to use of material. 3. Acceptance Criteria: Catalog Cuts for ‘Acceptance’ prior to use of material. Catalog Cut Approved Yes No 4. Acceptance Criteria: Submit Shop Drawings for ‘Approval’ prior to fabrication of material. 5. Acceptance Criteria: Only ‘Approved for Shipment’, ‘WSDOT Inspected’ or ‘Fabrication Approved Decal’ material shall be used. 6. Acceptance Criteria: Submit Certificate of Materials Origin to Project Engineer Office. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. 8. Source Approved: 9. Approval Withheld: Submit samples for preliminary evaluation. 10. Approval Withheld: 11. Miscellaneous Acceptance Criteria. Remarks (PE): Remarks (HQ): DOT Form 350-071 Revised 07/2023 Project Engineer Distribution Contractor Region Operations Engineer Fabrication Inspection Region Materials State Materials Lab - MS 47365 CANTEX INC. | 301 Commerce Street, Suite 2700, Fort Worth, TX 76102 | 817.215.7000 | www.cantexinc.com Nonmetallic PVC Schedule 80 Conduit Nonmetallic PVC Schedule 80 Conduit Belled End - 10’ Lengths CANTEX Schedule 80 PVC Conduit is designed for underground or aboveground applications that are at risk of physical damage. •Nonmetallic PVC material which is corrosion, rust & sunlight resistant •ETL listed •Conforms to UL651 and NEMA TC-2 •Rated for use with 90-degree C conductors •Made in USA •Sunlight Resistant •10’ Lengths •20’ Lengths available (See note below) Part No.Size Feet per Pack T Min OD ID Min E B D Nom L Min A53AE12 1/2 6,000 .147 .840 .502 .852 .836 1.500 120 A53AG12 3/4 4,400 .154 1.050 .698 1.064 1.046 1.750 120 A53BA12 1 3,600 .179 1.315 .910 1.330 1.310 2.000 120 A53BC12 1-1/4 3,300 .191 1.660 1.227 1.677 1.655 2.250 120 A53BE12 1-1/2 2,250 .200 1.900 1.446 1.918 1.894 2.500 120 A53CA12 2 1,400 .218 2.375 1.881 2.393 2.369 3.000 120 A53CE12 2-1/2 930 .276 2.875 2.250 2.890 2.868 3.250 120 A53DA12 3 880 .300 3.500 2.820 3.515 3.492 3.750 120 A53DE12 3-1/2*630 .318 4.000 3.486 4.015 3.992 4.000 120 A53EA12 4 570 .337 4.500 3.737 4.515 4.491 4.500 120 A53FA12 5 380 .375 5.563 4.713 5.593 5.553 5.500 120 A53GA12 6 260 .432 6.625 5.646 6.658 6.614 6.125 120 Dimensions are nominal PVC Schedule 80 Conduit Belled End-20’ Lengths CANTEX Schedule 80 Conduit is available in 20’ lengths with the exception of the ½ and 3/4 inch trade sizes. The measurements for each trade size listed above are the same with the exception of the length (L) which is 240 inches. The following is a list of the product numbers for each 20” conduit trade size: A53BA42 is the 1” trade size; A53BC42 is the 1 1/4 “ trade size; A53BE42 is the 1 1/2’ trade size; A53CA42 is the 2” trade size; A53CE42 is the 2 ½” trade size; A53DA42 is the 3” trade size; and A53EA42 is the 4” trade size. Nonmetallic PVC Schedule 40 & 80 Conduit BID ITEMS #34 SPEC#9-29.1(4)B CANTEX INC. | 301 Commerce Street, Suite 2700, Fort Worth, TX 76102 | 817.215.7000 | www.cantexinc.com Schedule 80 Standard Radius Elbows - Bell End Schedule 80 Standard Radius 90° Elbow - Bell End Schedule 80 Standard Radius 45° Elbow - Bell End CANTEX 90-Degree Bell End Schedule 80 Standard Radius Elbows are used to change the direction of a conduit run by 90 degrees. •Schedule 80 Extra Heavy Wall Nonmetallic PVC construction for strength and durability •For indoor or outdoor use•Suitable for aboveground or buried •Bell end for easy instal- lation •ETL Listed •Made in USA Part Number Trade Size Carton Qty.“R”“O”“H’“S” MIN “B” MIN “L” 5221056 1-1/4 30 7.250 7.250 7.250 2.000 1.500 11.375 5221057 1-1/2 30 8.250 8.250 8.250 2.000 2.000 13.000 5221058 2 15 9.500 9.500 9.500 2.000 2.000 15.000 5221059 2-1/2 18 10.500 10.500 10.500 3.000 2.250 16.500 5221060 3 14 13.000 13.000 13.000 3.125 2.500 20.375 5221061 4 10 16.000 16.000 16.000 3.375 3.250 25.125 5221062 5 30*24.000 24.000 24.000 3.625 4.250 37.625 5221117 6 25*30.000 30.000 30.000 3.750 5.000 47.125 * Pallet Quantity Dimensions are nominal Conforms to UL651 and NEMA TC3 Material is Rigid PVC Bend Tolerance is ±2° Part Number Trade Size Carton Qty.“R”“O”“H’“S” MIN “B” MIN “L” 5221006 1-1/4 25 7.250 2.125 5.125 2.000 1.500 5.688 5221007 1-1/2 20 8.250 2.438 5.813 2.000 2.000 6.500 5221008 2 10 9.500 2.813 6.750 2.000 2.000 7.500 5221009 2-1/2 20 10.500 3.063 7.438 3.000 2.250 8.250 5221010 3 8 13.000 3.813 9.188 3.500 2.500 10.188 5221011 4 20 16.000 4.688 11.188 3.375 3.250 12.563 5221012 5 30*24.000 7.000 17.000 3.625 4.250 18.875 5221013 6 25*30.000 8.875 21.250 3.750 5.000 23.563 * Pallet Quantity Dimensions are nominal CANTEX 45-Degree Bell End Schedule 80 Standard Radius Elbows are used to change the direction of a conduit run by 45 degrees. Conforms to UL651 and NEMA TC3 Material is Rigid PVC Bend Tolerance is ±2° •Schedule 80 Extra Heavy Wall Nonmetallic PVC con- struction for strength and durability •For indoor or outdoor use•Suitable for aboveground or buried •Bell end for easy installation •ETL Listed •Made in USA BID ITEM#34 SPEC#9-29.1(4)B CANTEX INC. | 301 Commerce Street, Suite 2700, Fort Worth, TX 76102 | 817.215.7000 | www.cantexinc.com Schedule 40 Center Stop Coupling Standard UL Schedule 40 Center Stop Coupling Schedule 40 Standard Center Stop Couplings are used to join lengths of conduit pipe together with two solvent weld socket ends. •For use with Schedule 40 and Schedule 80 conduit •Center stop to help determine proper depth of connection •For use aboveground and underground and non-conduc- tive and sunlight resistant •Meets NEMA TC-3 Standards •UL and CSA listed •Made in USA Part Number Trade Size Carton Qty.“W’“L”“ID”“D” 6141623 1/2 200 1.063 1.500 .875 .625 6141624 3/4 125 1.313 1.563 1.063 .625 6141625 1 70 1.625 2.000 1.313 1.000 6141626 1-1/4 40 2.000 2.125 1.688 1.000 6141627 1-1/2 30 2.250 2.375 1.938 1.063 6141628 2 40 2.688 2.600 2.375 1.192 6141629 2-1/2 20 3.250 3.500 2.875 1.750 6141630 3 40 4.000 3.875 3.500 1.188 6141631 3-1/2 30 4.1250 4.000 4.000 1.938 6141632 4 20 5.000 4.188 4.500 2.000 6141633 5 10 6.125 5.375 5.625 2.500 6141634 6 8 7.250 5.000 6.625 2.250 * 6141635D 8 1 9. 313 13.000 8.625 5.000 * Not UL Listed Dimensions are nominal SINGLE SOURCE FOR PVC ELECTRICAL CANTEX offers an all-inclusive line of Schedule 40 & Schedule 80 PVC electrical fittings and accessories. With several decades of experience manufacturing PVC fittings and accessories, you can trust CANTEX to provide quality products. All of our PVC fittings are easy-to-install and offer non-conductivity, high impact, tensile strength, industry certifications, and resistance to a wide range of chemicals, acids, and salt. Our schedule 40 & 80 fittings and accessories connect seamlessly with other standard schedule 40 & 80 products making it easy to convert entire electrical infrastructures to PVC. See our full line of PVC electrical products at www.cantexinc.com. BID ITEM#34 SPEC#9-29.1(4)B CANTEX INC. | 301 Commerce Street, Suite 2700, Fort Worth, TX 76102 | 817.215.7000 | www.cantexinc.com End Bell PVC End Bell SINGLE SOURCE FOR PVC ELECTRICAL CANTEX offers an all-inclusive line of Schedule 40 & Schedule 80 PVC electrical fittings and accessories. With several decades of experience manufacturing PVC fittings and accessories, you can trust CANTEX to provide quality products. All of our PVC fittings are easy-to-install and offer non-conductivity, high impact, tensile strength, industry certifications, and resistance to a wide range of chemicals, acids, and salt. Our schedule 40 & 80 fittings and accessories connect seamlessly with other standard schedule 40 & 80 products making it easy to convert entire electrical infrastructures to PVC. See our full line of PVC electrical products at www.cantexinc.com. Part Number Trade Size Carton Qty.“L”“ID”“OD” 5144003 1/2 100 1.000 .625 1.250 5144004 3/4 100 1.000 .875 1.500 5144005 1 50 1.250 1.063 1.750 5144006 1-1/4 50 1.313 1.375 2.125 5144007 1-1/2 50 1.563 1625 2.500 5144008 2 40 1.563 2.063 2.813 5144009 2-1/2 30 1.875 2.500 3.375 5144010 3 50 2.063 3.000 4.125 5144011 3-1/2 50 2.250 3.500 4.625 5144012 4 50 2.375 4.000 5.125 5144013 5 25 2.438 5.063 6.375 5144014 6 15 2.875 6.063 7.375 End Bells are used in concrete vault walls to provide a smooth, safe entrance to the conduit outside. Protects wiring which is being pulled through the vault wall. * 8 inch trade size is not UL or CSA Listed Dimensions are nominal •For use with Schedule 40 and Schedule 80 conduit•Protects wiring which is being pulled through concretevault walls•Easy installation•Meets NEMA TC-9 Standards•UL and CSA listed•Made in USA BID ITEM#34 SPEC#9-29.1(4)B www.atkore.com *UL 651 does not include 8” ATCE-SPEC-6711-2402 Trade Size Dimensions (in) Average OD Minimum Average ID Minimum Wall Thickness, T Bell Entrance A Bell Bottom B Bell Length C 1/2 0.840 0.502 0.147 0.852 0.836 1.75 3/4 1.050 0.698 0.154 1.064 1.046 2.25 1 1.315 0.910 0.179 1.330 1.310 2.25 11/4 1.660 1.227 0.191 1.677 1.655 2.25 11/2 1.900 1.446 0.200 1.918 1.894 2.75 2 2.375 1.881 0.218 2.393 2.369 4.00 21/2 2.875 2.250 0.276 2.890 2.868 4.00 3 3.500 2.820 0.300 3.515 3.492 4.00 31/2 4.000 3.280 0.318 4.015 3.992 4.00 4 4.500 3.737 0.337 4.515 4.491 5.00 5 5.563 4.713 0.375 5.593 5.553 5.75 6 6.625 5.646 0.432 6.658 6.614 6.50 8*8.625 7.455 0.500 8.670 8.610 6.50 Trade Size 10-foot Length 20-foot Length Approximate Weight per 100’ (lbs)Part Number Crate Quantity (ft) Part Number Crate Quantity (ft) 1/2 8005010 6,000 8005020 12,000 21 3/4 8007510 4,400 8007520 8,800 28 1 8010010 3,600 8010020 7,200 41 11/4 8012510 3,300 8012520 6,600 57 11/2 8015010 2,250 8015020 4,500 73 2 8020010 1,400 8020020 2,800 100 21/2 8025010 930 8025020 1,860 153 3 8030010 880 8030020 1,760 205 31/2 8035010 630 8035020 1,260 250 4 8040010 570 8040020 1,140 312 5 8050010 380 8050020 760 433 6 8060010 260 8060020 520 595 8*8080010 140 8080020 280 904 •Conforms to UL 651 and NEMA TC 2 •Sunlight resistant per UL 651 •Listed for 90º C conductors or cable •Product manufactured with one integral solvent-weld bell standard per length BID ITEM#34 PVC Rigid Schedule 80 Conduit SPEC#9-29.1(4)B www.alliedeg.us ATCE-SPEC-5015-1909 Conforms to NEMA TC-3 Trade Size Bell EntranceA Bell BottomB Bell LengthC Tangent Length D1/2 0.852 0.836 1.250 1.7503/4 1.064 1.046 1.250 1.75011.330 1.310 1.625 2.1251-1/4 1.677 1.655 1.750 2.250 1-1/2 1.918 1.894 2.250 2.250 2 2.393 2.369 2.250 2.250 2-1/2 2.890 2.868 2.750 3.250 3 3.515 3.492 2.875 3.375 3-1/2 4.015 3.992 3.000 3.500 4 4.515 4.491 3.500 3.625 5 5.593 5.553 4.375 4.625 6 6.658 6.614 5.250 5.500 8 8.670 8.610 6.250 6.500 Dimensions are nominal (inches) and are subject to normal manufacturing tolerances Not all Radii/Angles are available in every size - consult sales catalog for details Available with Standard or Special (18", 24", 36", 48", 60") Radius Available in both Bell-End and Plain-End versions. Bell dimensions do not apply to Plain End Elbows 6" & below tested and certified by ETL Intertek to UL651 •Dimensions are nominal (inches) and are subject to normal manufacturing tolerances •Not all radii/angles are available in every size – consult sales catalog for details •Available with standard or special (18", 24", 36", 48", 60") radius •Available in both Bell-End and Plain-End versions. Bell dimensions do not apply to Plain End Elbows • 6" and below tested and certified by ETL Intertek to UL651. UL 651 does not include 8" •Conforms to NEMA TC-3 Trade Size(in)Bell Entrance A Bell BottomB Bell Length C Target LengthD 1/2 0.852 0.836 1.250 1.750 3/4 1.064 1.046 1.250 1.750 1 1.330 1.310 1.625 2.125 11/4 1.677 1.655 1.750 2.250 11/2 1.918 1.894 2.250 2.250 2 2.393 2.369 2.250 2.250 21/2 2.890 2.868 2.750 3.250 3 3.515 3.492 2.875 3.375 31/2 4.015 3.992 3.000 3.500 4 4.515 4.491 3.500 3.625 5 5.593 5.553 4.375 4.625 6 6.658 6.614 5.250 5.500 8 8.670 8.610 6.250 6.500 Conforms to NEMA TC-3 Trade Size Bell Entrance A Bell Bottom B Bell Length C Tangent Length D 1/2 0.852 0.836 1.250 1.750 3/4 1.064 1.046 1.250 1.750 1 1.330 1.310 1.625 2.125 1-1/4 1.677 1.655 1.750 2.250 1-1/2 1.918 1.894 2.250 2.250 2 2.393 2.369 2.250 2.250 2-1/2 2.890 2.868 2.750 3.250 3 3.515 3.492 2.875 3.375 3-1/2 4.015 3.992 3.000 3.500 4 4.515 4.491 3.500 3.625 5 5.593 5.553 4.375 4.625 6 6.658 6.614 5.250 5.500 8 8.670 8.610 6.250 6.500 Dimensions are nominal (inches) and are subject to normal manufacturing tolerances Not all Radii/Angles are available in every size - consult sales catalog for details Available with Standard or Special (18", 24", 36", 48", 60") Radius Available in both Bell-End and Plain-End versions. Bell dimensions do not apply to Plain End Elbows 6" & below tested and certified by ETL Intertek to UL651 BID ITEM# 34 Elbows Schedule 40 and Schedule 80 SPEC#9-29.1(4)B www.atkore.com •Listed to UL 651 •Conforms to NEMA TC 3 •Injection molded with center stop *8 inch products are not included in UL 651 or NEMA TC 3 ATCE-SPEC-6708-2402 Trade Size Part Number Average Dimensions (in)Package Quantity Length (L) Socket Depth (D) Socket ID ½CP05 1.51 0.72 0.85 200 ¾CP07 1.58 0.75 1.06 125 1 CP10 1.89 0.91 1.33 70 1¼CP12 2.03 0.97 1.68 40 1½CP15 2.42 1.15 1.92 30 2 CP20 2.45 1.17 2.39 40 2½CP25 3.76 1.80 2.89 20 3 CP30 3.97 1.91 3.52 40 3½CP35 4.23 2.02 4.02 30 4 CP40 4.22 2.03 4.52 20 5 CP50 4.08 1.97 5.59 10 6 CP60 6.43 3.00 6.69 8 8*CP80 8.34 4.02 8.65 1 BID ITEM# 34 PVC Molded Couplings SPEC#9-29.1(4)B www.atkore.com ATCE-SPEC-6707-2402 Trade Size Part Number Average Dimensions (in) Package QuantityLength (L)Socket ID Flared End ID (A) 1/2 MEB05 1.00 0.85 0.63 100 3/4 MEB07 1.00 1.06 0.88 100 1 MEB10 1.20 1.33 0.95 50 11/4 MEB12 1.24 1.68 1.32 50 11/2 MEB15 1.36 1.92 1.64 50 2 MEB20 1.55 2.39 2.12 40 21/2 MEB25 1.89 2.89 2.58 30 3 MEB30 1.93 3.52 3.12 50 31/2 MEB35 2.11 4.02 3.62 50 4 MEB40 2.18 4.52 4.10 50 5 MEB50 2.39 5.59 5.11 25 6 MEB60 2.57 6.69 6.12 15 8 MEB80 6.00 8.67 8.12 1 •Suitable for use with Schedule 40 or Schedule 80 conduit •Also compatible with EB or DB duct BID ITEM# 34 PVC Molded End Bells SPEC#9-29.1(4)B Solvent Cement & Primer for Conduit & Fittings Part Number Size Carton Qty. 7210601 1/2 Pint 24 7210602 Pint 12 7210603 Quart 12 Part Number Size Carton Qty. 7210501 1/2 Pint 24 7210502 Pint 12 7210503 Quart 12 Low Voc Conduit Cement No. 99 - Gray Low Voc Conduit All Weather Cement Part Number Size Carton Qty. 7211303 Quart 12 Part Number Size Carton Qty. 7210411 1/2 Pint 24 7210412 Pint 12 7210413 Quart 12 CANTEX PVC cements and primers are for use on rigid PVC Electrical conduit and fittings. We recommend the use of CANTEX PVC cements and primers with CANTEX PVC products since they are especially formulated for use with our products. DO NOT USE FOR WATER, SEWER OR DWV INSTALLATIONS. ENT NO. 50 Low Voc Cement Solvent Cement for EZ-FLEX ENT Part Number Size Carton Qty. 7210402 Pint 12 7210403 Quart 12 Pipe Size 1/2”3/4”1”1-1/4”1-1/2”2”2-1/2”3”4”5”6” Cement 1/2 1/2 1/2 1 1 1 1-1/2 1-1/2 2 2-1/2 4 Primer 1/2 1/2 1/2 1 1 1 1-1/2 1-1/2 2 2-1/2 4 ESTIMATED SOLVENT REQUIREMENT PER 1,000 FEET IN QUARTS One weld per 20 feet Conduit Primer No. 10 Operating temperature range is -15˚F to 110˚F. Operating temperature range is 50˚F to 100˚F. CANTEX INC. | 301 Commerce Street, Suite 2700, Fort Worth, TX 76102 | 817.215.7000 | www.cantexinc.com Low Voc Conduit Cement No. 99 BID ITEM#34 SPEC#9-29.1(4)B PLASTI-WELD™ 403 SERIES MEDIUM GRAY PVC SOLVENT CEMENT Page 1 of 2 TECHNICAL SPECIFICATION: Plasti-Weld 403 Series Medium Gray PVC Solvent Cement is recommended for solvent welding all schedules and classes of PVC pipe and fittings up to 6” with interference fit. Medium Gray PVC Solvent Cement can be used for potable water, sewer and drain, waste and vent systems. This product is compliant with California South Coast Air Quality Management District (SCAQMD) Rule 1168 and Ozone Transport Commission (OTC) regulations for Volatile Organic Compound emission levels. Note: This product is not for use in a system using or being tested by compressed air or gases. PHYSICAL/CHEMICAL PROPERTIES Appearance Gray Liquid Viscosity minimum 500 cps @ 73° F ± 2° F Density 7.74 ± 0.2 lbs/gallon Lap Shear Strength (minimum per ASTM Standards) 2 hours 250 psi 16 hours 500 psi 72 hours 900 psi Set Up Time 30° F to 50° F 5 – 6 minutes 50° F to 70° F 3 – 4 minutes 70° F to 90° F 1 – 2 minutes Shelf Life 3 years from manufacture date Maximum VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/L INGREDIENTS (CAS Number) Acetone (67-64-1) Amorphous Silica (112945-52-5) Cyclohexanone (108-94-4) Gray Colorant (N/A) Methyl Ethyl Ketone (78-93-3) PVC Resin (9002-86-2) Tetrahydrofuran (109-99-9) LISTINGS NSF Standard 61 IAPMO Listed for PW, DWV, SEWER Meets ASTM Standard D 2564 PRODUCT NUMBER SIZE PACK CARTON WEIGHT 40366S 4 fl. oz. 24 9 lbs. 40356S 8 fl. oz 24 16 lbs. 40346S 16 fl. oz. 24 27 lbs. 40336S 32 fl. oz. 12 26 lbs. 40324 Gallon 6 52 lbs. 1/2010 PLASTI-WELD™ 403 SERIES MEDIUM GRAY PVC SOLVENT CEMENT Page 2 of 2 PRECAUTIONS Read all information carefully before using this product. DANGER: EXTREMELY FLAMMABLE. VAPORS MAY CAUSE FLASH FIRES. MAY IRRITATE EYES AND SKIN. VAPOR HARMFUL. MAY IRRITATE RESPIRATORY TRACT AND CAUSE CENTRAL NERVOUS SYSTEM DEPRESSION. HARMFUL OR FATAL IF SWALLOWED. May cause irritation to eyes, skin, and nose, throat, and respiratory tract. May cause coughing, sore throat, difficulty breathing, headache, dizziness, nausea. Long term repeated overexposures to solvents may cause damage to the brain, nervous system, reproductive system, respiratory system, mucous membranes, liver, and kidneys. KEEP OUT OF REACH OF CHILDREN. FIRST AID: If swallowed, DO NOT INDUCE VOMITING. Drink water and call a doctor or poison control center immediately. This product may be aspirated into the lungs and cause chemical pneumonitis, a potentially fatal condition. If contact with eyes, flush with water for 15 minutes and seek medical attention if irritation persists. If contact with skin, flush with water and then use baby oil or hand cleaner to remove residue. If inhaled and ill feelings develop, get fresh air and obtain medical attention if ill feelings persist. FOR EMERGENCY FIRST AID INSTRUCTIONS CALL 1-877-740-5015. FIRE: Use dry chemical, foam, or carbon dioxide extinguisher. Water spray may be applied to reduce potential vapors or for cooling. Burning liquid extinguished with water will float and may re-ignite on surface of water. SPILLS: Remove all sources of ignition and ventilate area. Personnel cleaning up the spill should wear appropriate personal protective equipment, including respirators if vapor concentrations are high. Soak up spill with absorbent material. Put absorbent material in covered, labeled metal containers. Dispose of in accordance with local regulations. A fire or explosion may result if dry granular calcium hypochlorite is used to disinfect plastic piping systems and is exposed to organic vapors found in solvent cements, cleaners or primers. Do not disinfect piping system with dry granules. Do not store dry granular calcium hypochlorite near solvent cements, cleaners or primers. DO NOT REUSE EMPTY CONTAINER. KEEP OUT OF REACH OF CHILDREN. Refer to material safety data sheet for more information. 1/2010 DIRECTIONS FOR USE Read all directions carefully before using this product. • Do not breathe vapors. Use only in well ventilated area. If forced air ventilation is used, be sure it does not cause a fire hazard from solvent vapors. If adequate ventilation cannot be provided, wear a NIOSH-approved respirator for organic solvents. • Do not use or store near heat, sparks, or flames. Do not smoke, eat or drink when using. Do not take internally. Vapors may accumulate in low places and may ignite explosively. • Store and use at temperatures between 40ºF and 110ºF. At temperatures outside of this range, special care must be taken to prepare good joints and prevent exposures to solvents. • Stir or shake before using; if jelly-like, don’t use. Keep container closed when not in use. • Avoid eye and skin contact - wear safety glasses with side shields and wear rubber gloves. • Do not thin. 1.Square pipe ends and remove all burrs and dirt. 2.Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If the pipe bottoms, it should be snug. 3.Use a suitable applicator at least 1/2 the size of the pipe diameter. For larger size pipe systems use a natural bristle brush or roller. 4.Clean pipe and fitting with a listed primer. 5.Apply liberal coat of cement to pipe to the depth of the socket; leave no uncoated surface. 6.Apply a thin coat of cement to inside of fitting; avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe. 7.Assemble parts QUICKLY. Cement must be fluid. If cement surface has dried, recoat both parts. 8.Push pipe FULLY into fitting using a 1/4 turning motion until pipe bottoms. 9.Hold pipe and fitting together for 30 seconds to prevent pipe push-out – longer at low temperatures. Wipe off excess. 10.Allow 15 minutes for good handling strength and 2 hours cure time at temperatures above 60ºF before hydrostatic pressure testing up to 180 psi. Longer cure times may be required at temperatures below 60ºF or with pipe diameters over 3”. DO NOT TEST WITH AIR. This product is not for use with caustic or acidic chemical solutions. Consult Technical Department for more information. Before purchase and use of a product, review the product application and be certain the product, installation and use will be in compliance with any applicable codes and regulations.