The URL can be used to link to this page

Home My WebLink AboutTSI #7 GroundingPE Appr'l Code Date Project Engineer Distribution State Materials Engineer Distrubution Contractor General File Signing Inpsection Region Operations Engineer Other __________________________________ Fabrication Inspection M/S 47365 Revised 03/2018 Region Materials State Materials Lab DOT Form 350-071 10. Approval Withheld: 11. Miscellaneous Acceptance Criteria. Remarks: 5. Acceptance Criteria: Only 'Approved for Shipment' or 'WSDOT Inspected' or 'Fabrication Approved Decal' material shall be used. 6. Acceptance Criteria: Submit Materials Certificate of Origin to Project Engineer. 7. Acceptance Criteria: Request Transmitted to State Materials Laboratory for Approval Action. 8. Source Approved: ______________________________________________________________________________________ 9. Approval Withheld: Submit samples for preliminary evaluation. Approval Action Codes for use by Project Engineer and state Materials Laboratory 1. Acceptance Criteria: Acceptance based upon 'Satisfactory' Test Report for samples of materials to be incorporated into project. 2. Acceptance Criteria: Submit Mfg. Cert of Compliance for 'Acceptance' prior to use of material 3. Acceptance Criteria: Catalog Cuts for 'Acceptance' prior to use of material. Catalog Cut Approved Yes No 4. Acceptance Criteria: Submit Shop Drawings for 'Approval' prior to fabrication of mateiral. Project Engineer/Representative Date State Materials Engineer 1 Ground Clamp NSI Industries - Huntersville, NC 8-20.3(9) 1 Ground Rod Clamps Blackburn/T&B - Memphis, TN 8-20.3(9) 1 Ground Clamp Dottie - Commerce, CA 8-20.3(9) 1 Ground Rod Clamps Erico - Solon, OH 8-20.3(9) 1 Ground Rod Southern Grounding - Chattanooga, TN 8-20.3(9) 1 Ground Rod Box H2 Precast - East Wenatchee, WA 9-29.2(1) 1 Ground Rod Erico - Solon, OH 8-20.3(9) This shall be completed prior to submittal. If this form is not complete at time of submittal it may be returned for information that was omitted. For WSDOT Use Only RAM # Bid Item No. Material or Manufacturer's Product/Type Name and Location of Fabricator, Manufacturer or Pit Number Specification Reference Hdqtr. Appr'l Code Hazen High School Pedestrian SignalsContractor Subcontractor Sare Electric Transportation Systems Inc TSI #7 2/19/2026 Section / Title of Project County TSI #7 Request for Approval of Material Contract Number FA Number SR Date Washington State Department of Transportation ∅1'-0" ~ ∅9" ∅8" 1'-0" ~ ∅13 1/2" OD NOTES: 1.DRAWING NOT TO SCALE 2.DIMENSIONS ARE APPROXIMATE G ROUND ROD ∅9" ROUGHENED SURFACE EMBOSSED TEXT THICKNESS: 1 1/2" THK TYPICAL GROUND ROD BOX BASE DIMENSIONS SCALE: NTS CONCRETE LID PLAN SCALE: NTS CONCRETE LID ∅5/8" HOLE H² Pre-Cast Inc. 3835 N Clemons East Wenatchee, WA 98802 Phone: (509) 884-6644 Fax: (509) 884-4567 © 2021 H² Pre-Cast Inc. GROUND ROD BOX WITH CONCRETE LID Washington State Department of Transportation January 23, 2026 Qualified Product List Contractor Product Information Contract No: Date: 1/23/2026 Contractor: Chinn Construction Sub Contractor: TSI Bid Item: 1 Manufacturer: Erico International Corporation - Solon, OH Product Name: Eritech Ground Rods: 611205, 611300 and 615880, 615883, 615800, 615803, 615812, 615815 Standard Spec : 8-20.3(9), Electrical - Ground Rods and Hardware Product Description : Copper-clad grouund rod: 1/2-inch diameter - 10-foot; 5/8-inch diameter - 8-foot to 15-foot Product Restriction : Acceptance Code : 3102 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. If the Contract contains a Buy America clause, the PEO is responsible for acquiring a Certificate of Material Origin from the Contractor. Note 'Restrictions' when present. Last Updated : Apr 25, 2014 To be completed by the field inspector: Quantity: _________ Verified By: _________ Date: _________ 1/23/2026 Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=2002176&product_origin=QPL&location_id=2436&Std_spec_minor=8-20.3(9)&Product…1/1 Copper-Bonded Ground Rod, Pointed – 613400 • 99.9% pure electrolytic copper coating• Molecular bond to nickel-sealed high strength steel core• Rods have a high carbon steel core and tip that provide superior strength when driving• Copper coating will not crack when bent or tear when driven• Minimum copper coating of 10 mils on rods listed to UL ® 467• nVent ERICO name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered end• UL logo and control number where applicable stamped on each rod for easy inspection after installation L Ø Part Number 613400 Material Copper-Bonded Steel Tensile Strength 80,000 psi Min Ground Rod Diameter, Nominal 3/4" Ground Rod Diameter, Actual (Ø)0.681" Length (L)10' Plating Thickness 10 mil Unit Weight 12.6 lb UPC Label No Complies With IEC® EN 62561-2ANSI®/NEMA® GR1 Certifications CSA 46866cULusQualifoudreRUS Part Number 613400 Standard Packaging Quantity 5 pc UPC 78285630617 EAN-13 8711893093636 For rods to be listed to UL® 467, they must be at least 8' (2.43 m) in length. IEC® EN 62561-2 supercedes EN 50164-2. Additional lengths available. ANSI is a registered trademark of American National Standards Institute. CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association. IEC is aregistered trademark of the International Electrotechnical Commission. NEMA is a registered service mark of National Electrical Manufacturers Association. UL, UR, cUL, cUR, cULusand cURus are registered certification marks of UL LLC. WARNINGnVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and fromyour nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause productmalfunction, property damage, serious bodily injury and death and/or void your warranty. © 2020 nVent All rights reservednVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice. Ground Rod Clamp, Rod to Conductor, Bronze • For use with copper-bonded ground rods• Parts that are UL Listed are suitable for direct burial in earth or concrete Ø TQ Material: Silicon Bronze Part Number Ground RodDiameter, Nominal Ground RodDiameter, ActualØ Conductor Size Wrench Size Certifications Torque: 150 – 300 in lb CP38 3/8"0.38"#10 Solid - #2 Stranded,6 mm² Solid - 25 mm² Stranded 3/8"cULus CP58 1/2" – 5/8"0.50" – 0.56"#10 Solid - #2 Stranded,6 mm² Solid - 25 mm² Stranded 1/2"CSA, cULus CP34 1/2" – 3/4"0.50" – 0.68"#10 Solid - 1/0 Stranded,6 mm² Solid - 50 mm² Stranded 1/2"CSA, cULus Torque: 150 – 450 in lb HDC12 1/2"0.50"#10 Solid - #2 Stranded,6 mm² Solid - 25 mm² Stranded 1/2"CSA, cULus HDC58R 5/8"0.56"#8 Solid - 1/0 Stranded,10 mm² Solid - 50 mm² Stranded 1/2"CSA, cULus HDC58 5/8"0.56"#8 Solid - 1/0 Stranded,10 mm² Solid - 50 mm² Stranded 9/16"CSA, cULus HDC34 3/4"0.68"#8 Solid - 1/0 Stranded,10 mm² Solid - 50 mm² Stranded 9/16"CSA, cULus HDC34SP 3/4"0.68"#8 Solid - 3/0 Stranded,10 mm² Solid - 70 mm² Stranded 9/16"CSA HDC1 1"1.00"#8 Solid - 4/0 Stranded,10 mm² Solid - 95 mm² Stranded 9/16"cULus CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association. UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC. WARNINGPentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com andfrom your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may causeproduct malfunction, property damage, serious bodily injury and death and/or void your warranty. © 2016 Pentair All rights reservedPentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates.All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice. Washington State Department of Transportation January 23, 2026 Qualified Product List Contractor Product Information Contract No: Date: 1/23/2026 Contractor: Chinn Construction Sub Contractor: TSI Bid Item: 1 Manufacturer: Southern Grounding Products (South Atlantic LLC) - Chattanooga, TN Product Name: C1210 and C588 rods and G-5 and WB58H Standard Spec : 8-20.3(9), Electrical - Ground Rods and Hardware Product Description : Copper-clad grouund rod: 1/2-inch diameter - 10-foot; 5/8-inch diameter - 8- foot; and ground rod clamp Product Restriction : Acceptance Code : 3102 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. If the Contract contains a Buy America clause, the PEO is responsible for acquiring a Certificate of Material Origin from the Contractor. Note 'Restrictions' when present. Last Updated : Sep 13, 2010 To be completed by the field inspector: Quantity: _________ Verified By: _________ Date: _________ 1/23/2026 Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=2009019&product_origin=QPL&location_id=2452&Std_spec_minor=8-20.3(9)&Product…1/1 Meet the following industry standards: • ANSI/UL 467 • ANS1/NEMA GR1-2017 • CSA C22.2 • Rural Utilities Service—RUS • Steel—cold drawn ASTM-A-1080 •SAE 1018-1035 carbon steel •Tensile strength 80,000-100,000 PSI • ANSI C33.8 •Steel Rockwell Hardness—B80 (minimum) • Copper coating is a minimum of .010 inches, meeting or exceeding UL, CSA and ANSI specifications forcorrosion protection. • Company name, part number, UL and/or CSA logo and control number are located within 12” of the chamfered end of each rod. • Pointed and sectional copper-bonded ground rods in popular diameters and lengths are stocked nationwide: 1/2”, 5/8”, 3/4”, and 1” diameters; 6’, 8’, and 10’ lengths. • Copper is molecularly bonded to a steel core through an electrolytic process to create a permanent bond. *Rural Utilities Services accepted (RUS) – 15 mil average, 13 mil minimum copper coating Toll-free: 855.327.8063 • Local: 423.698.4199 • Fax: 423.826.3525 e-mail: sgrounding@southatlanticllc.com www.southerngroundingproducts.com Me e t s A N S I / U L 4 6 7 a n d A N S 1 / N E M A G R 1 - 2 0 1 7 POINTED RODS CATALOG NUMBER SECTIONAL RODS NOMINAL DIAMETER IN INCHES ACTUAL DIAMETER ± .005 LENGTH THREAD UNC IN INCHES LENGTH IN INCHES WEIGHT IN POUNDS DIMENSIONS SUB / MASTER BUNDLES PACKAGED 9/16” 1 1/16” 5/8” 9/16” 1 1/16” 5/8” 1 3/16” 3/4” 1 1/8” 1” 11/8” 5 / 100 5 / 50 5 / 50 - / 25 SOUTHERN GROUNDING A PRODUCT OF SOUTH ATLANTIC, LLC Copper-Bonded Ground Rods 6’ 5’ 6’ 8’ 10’ 8’ 8’ 10’ 10’ 12’ 8’ 8’ 10’ 10’ 10’ 4.22 lbs. 4.27 lbs. 5.12 lbs. 5.62 lbs. 7.03 lbs. 6.83 lbs. 6.83 lbs. 8.54 lbs. 8.54 lbs. 10.30 lbs. 10.00 lbs. 10.00 lbs. 12.50 lbs. 12.50 lbs. 22.51 lbs. 1/2” .500 5/8” .560 1/2” .500 5/8” .560 3/4” .678” 1” .912” C126 C585 C586 CS586 C128 C1210 C588 CS588 C58813* C5810 CS5810 C581013* C5812 C348 CS348 C34813* C3410 CS3410 C341013* C110 CS110 Washington State Department of Transportation January 23, 2026 Qualified Product List Contractor Product Information Contract No: Date: 1/23/2026 Contractor: Chinn Construction Sub Contractor: TSI Bid Item: 1 Manufacturer: Blackburn (a Thomas & Betts Company) - Guadalupe, -- Product Name: Ground Rod Clamp: Models JAB-12H, JAB-58H Standard Spec : 8-20.3(9), Electrical - Ground Rods and Hardware Product Description : Bronze ground rod clamp Product Restriction : Acceptance Code : 3101 Code Description : Visually verify the product delivered to the job site is the product that was originally submitted by the Contractor and approved from the QPL. Note 'Restrictions' when present. Last Updated : Sep 13, 2010 To be completed by the field inspector: Quantity: _________ Verified By: _________ Date: _________ 1/23/2026 Qualified Product List https://wsdot.wa.gov/biz/mats/QPL/QPLPrint.cfm?Product_no=1993449&product_origin=QPL&location_id=71&Std_spec_minor=8-20.3(9)&Product_n…1/1 1 / 3 LH Dottie Submittal https://lhdottie.com/ Table Of Contents 1/2''-1'' Bronze Bare Ground Clamp (Direct Burial)2 Product Specification Sheet 2 Technical Sheet 3 BID ITEM # SPEC # 8-20.3(9) 2 / 3 1/2''-1'' Bronze Bare Ground Clamp (Direct Burial) https://lhdottie.com/ Product Specifications 1/2''-1'' Bronze Bare Ground Clamp (Direct Burial) Part Number DB25 Category Number 5560 UPC 781002675006 Bare Ground Clamps are used to connect bare copper wire to rebar, ground rod, steel water pipe and copper water tubing for grounding. They are manufactured from highly conductive copper alloy. Physical Characteristics Type Ground Clamp Style Bare Set Screw (in)1/4''-20 x 1-1/2'' Pipe Size (in)1/2'' - 1'' Copper Rod Size 1/2'' - 1'' Rebar Size #4 - #8 Size 1/2'' - 1'' Material Bronze Conductor Material Copper Screw Material Silicon Bronze Packaging Details Standard Qty 25 Master Qty 250 Price Per 100 Package Length 3.80 Package Width 5.60 Package Height 5.00 Net Weight 0.1866 Package Weight 4.67 Performance Data Torque Rating 50 lb/in Applications Connects Bare Copper Wire to Galvanized Steel Water Pipe or Copper Tubing and Rebar for Grounding and Bonding Special Features Suitable for Direct Burial Environmental Conditions Corrosive, Wet, Acidic Certifications RoHS Compliant No Industry Standard UL & CSA Listed L.H. Dottie Co. Commerce, CA 323-725-1000 www.lhdottie.com BID ITEM # SPEC # 8-20.3(9) 3 / 3 1/2''-1'' Bronze Bare Ground Clamp (Direct Burial) https://lhdottie.com/ Performance Data PN#Pipe Range Wire Range Rebar Range Copper Rod Range Screw Material DB25 1/2” - 1”#10 - #2 1/2” - 1”1/2” - 1”Bronze “Building a Better Brand” | L.H. Dottie Co. | Commerce, CA | 323-725-1000 | www.lhdottie.com PRODUCT SPECIFICATIONS Bare Ground Clamps Bare ground clamps are used to connect bare copper wire to rebar, ground rod, steel water pipe and copper water tubing for grounding. They are manufactured from highly conductive copper alloy. Select modes are suitable for direct burial. Features: • UL listed • Suitable for direct burial in earth and concrete • Approved for rebar 4-8 Product Image BID ITEM # SPEC # 8-20.3(9) Heavy Duty Bronze Ground Clamp, 1/2" to 1" Pipe, 1" Rebar, Burial Heavy Duty Bronze Ground Clamp, 1/2" to 1" Pipe, 1" Rebar, Burial #G-1-SDBR NSI grounding and bonding products rise to the occasion in a wide variety of indoor and outdoor environments with excellent material quality and flexible designs. These cast bronze ground clamps offer a convenient and reliable solution for grounding electrical infrastructure in direct burial applications. Grips onto pipes or rebar tightly by using the 304 stainless steel screws to tighten the clamp and holds ground wire in place with a simple set-screw design. Additionally, NSI grounding clamps feature flexible sizing to meet a wider range of needs on the jobsite. NSI products are designed to meet or exceed UL 467 requirements for grounding and bonding, delivering exceptional performance in demanding environments. Choose the brand that professionals trust for reliable, affordable grounding and bonding in the field—choose NSI. Download Heavy Duty Bronze Ground Clamp, 1/2? to 1? Pipe, 1? Rebar, Burial Product Information GTIN 662381005335 UPC 662381005335 EAN 662381005335 UNSPSC 39121613 Origin Country IN Ul Standard UL467 Assortment Copper Ground Clamps Application Ground Product Documents NSI_GroundingFam_GRB_ProdSheet_DIGITAL.pdf 13235 Reese Boulevard West Huntersville, NC 28078 800.321.5847 techteam@nsiindustries.com BID ITEM # SPEC # 8-20.3(9)