HomeMy WebLinkAboutA_Civil Construction Permit Application_180314_v1.pdfDEPARTMENT OF COMMUNITY
AND ECONOMIC DEVELOPMENT
Page 1 of 5 |Published://201
Planning Division | 1055 South Grady Way, 6th
CIVIL CONSTRUCTION PERMIT
1. Fill out Civil Construction Permit Application form and
2. Schedule an Intake Meeting with the assigned City Development Engineer.
d at the First Intake meeting:
Civil Construction Permit Application
, Complete TIR, and all supporting reports and studies
(.xlsx format)
easement and/or rightofway dedication documents (note: not applicable to
out)
the City has accepted the submitted materials for review
as
.
screen meeting prior to preparing the required
City Development
City Development Engineer. Please
the application screening.
CIVIL CONSTRUCTION PERMIT
Project Costs for
The
It
and transportation facilities, both on
Enter estimated costs in items (A
(A)Water
(B)
(C)
(D)
Page 4 of 5 |Published://201
“Construction Plan Drafting Standards” as required per RMC 48120.
All Plans Required Unless Waived by City Staff
Cover Sheet
Sheet Index (If not on the Cover Sheet)
Existing Conditions/Topography Plan
Horizontal Control Plan
Site Plan
Temporary Erosion and Sediment Control Plan
Grading Plan (may be combined with Temporary Erosion and Sediment Control Plan or
Storm Drainage Plan)
Conceptual Structural/Retaining Wall and/or Detention Vault Plans Associated with
Civil Improvements
Composite Utility Plan
Road/Paving/Storm Drainage Plan and Profiles (Large Projects May Require Separate
Street Improvement and Storm Drainage Plans)
Wastewater and Water Utility Plan and Profiles(Large Projects May Require Separate
Wastewater and Water Plans)
Plumbing Plan [Commercial/Industrial] – For informational purposes only
City Standard Details (Organized by Private vs. Public)
Street Lighting Plan and Details
Traffic Signals Plan and Details
Signing and Channelization Plan and Details
Landscaping Plan and Details
Tree Retention/Land Clearing (Tree Inventory)Plan
Wetland or Stream Mitigation Plan
Miscellaneous Plans (Structural, Architectural, etc.)
ete report in accordance with the current Surface Water Design
pplicant is responsible for compliance with all
Page 5 of 5 |Published://201
d Maps
, Low Impact Development (LID), and Water Quality Facility Analysis and Design
– Topographical map with listed site information
drology (Part B) – Data/narrative for developed site conditions
– Summarize flow control and OnSite BMPs
– Illustrative sketch and documentation
– Illustrative sketch and documentation
plains Analysis, etc.)
DOE Permit with WAR #, etc.)