HomeMy WebLinkAboutSecurity Barrier Police Training Center&City Attorney Ti - Bid Documents 15 July 2019
SECTION 1115 01
SECURITY BARRIER
PART 1 GENERAL
1.01 DESCRIPTION
A. The security screens shown on the plans and herein specified are the products of Kane Architectural
Innovations, Erie, Pennsylvania. This manufacturer's name and products have been used to establish
the standards of construction and quality of workmanship required for this project. Manufacturers
bidding on this project must be actively engaged in the fabrication of specified items for a minimum of
five(5)years prior to the bid date.
1.02 SUBMITTALS
A. A. Manufacturer shall submit shop drawings,showing details of attachment to surround materials and
elevations showing scope of the project.
B. B. Samples of materials as may be requested without cost to owner: frame sections,wire cloth,
fasteners,corner section,etc.
1.03 WARRANTY
A. The operation of the security screen supplied by Kane Architectural Innovations on the designated
project is warranted for one(1)year against any proven defective material or parts,as called for in the
specifications and approved shop drawings. This warranty does not cover abuse by others.
PART 2 PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS
A. Kane Architectural Innovations, Erie, PA;www.kaneinnovations.com
B. Substitutinos: See Section 0160 00- Product Requirements
2.02 MAIN FRAME
A. The main frame rails shall be of not less than 12-guage- 1 3/16"[30.163mm]x 13/8"[34.925mm]
extruded from 6063-T6 aluminum alloy. All thickness shall be.080-inch. The corners of the main frame
shall be mitered,fitted with an internal corner assembly then welded.
B. Removable barrier back rail,extruded from 6063-T6 aluminum alloy, .030-inch thick, .088 lbs./ft,shall
be attached to the main frame using square drive TEK screws.
C. Level
2.03 TESTING AND PERFORMANCE
2.04 CERTIFICATIONS-PERFORMANCE AND TESTING MUST COMPLY WITH IMPACT TEST,SAG TEST AND
FORCED ENTRY RESISTANCE TEST OF SMA 6001-02. MANUFACTURER MUST SUBMIT THE AAMA NOTICE
OF PRODUCT CERTIFICATION IN COMPLIANCE WITH CFR 200.935 AS"SECURITY SCREEN-HEAVY".
2.05 FINISH
A. The mainframe shall be thoroughly cleaned in a 5-step bonderizing process. An electrostatically applied
thermoplastic, polyester powder coating shall be applied and baked to a hard mar resistant finish.
1. Black
Job Number2170712.00 SECURITY BARRIER
CAG-19-196 11 1501 - 1/2
Police Training Center&City Attorney Ti - Bid Documents 15 July 2019
B. The concealment plates and infill shall be thoroughly cleaned in a 5-step bonderizing process. An
electrostatically applied black,thermoplastic, polyester powder coating(2.5 mil min.thickness)shall be
applied and baked to a hard mar-resistant finish.
2.06 INFILL
A. 12-gauge mill-galvannized steel with 51%open area
2.07 PERFORATED PANEL ATTACHMENT
A. A. The perforated panel shall be retained by a removable concealment plate with square drive TEK
screws.
B. B. Square drive TEK screws shall penetrate the concealment plate, perforated panel and Main Frame
approximately 6"on center.
PART 3 EXECUTION
3.01 INSPECTION
A. Verify that openings fit allowable tolerance,are plumb, level, provide a solid anchoring surface and
comply with approved shop drawings.
3.02 INSTALLATION
A. Install in accordance with approved shop drawings and specifications.
B. Plumb and align faces in a single plane and erect screens square and true,adequately anchored to
structure.
C. After completion of installation,screens shall be adjusted, in working order and cleaned.
END OF SECTION
SECURITY BARRIER Job Number 2170712.00
11 1501 -2/2 CAG-19-196