HomeMy WebLinkAboutT-2053011 -1/2" CONDUIT FROM CABINET TO J -BOX -
W/ 2 -Ic p8, 1 -Ic #;10 BARE CONDUCTOR
LIGHTING CONTACTOR AND CONTROL CABINET
PER CITY OF RENTON STANDARD DETAILS
INSTALL TYPE I -A JUNCTION BOX PER
CITY OF RENTON STANDARD DETAILS
COORDINATE ELECTRICAL CONNECTION W/
PUGET POWER USE 3 #6 AWG U.S.E.
VERIFY SVC CONNECTION W/ PUGET POWER
7D r3lGET Pd...ta - -.
Scu 2CE O- ,= pwEe?_
4
2 +0 —
I
i
I�
l�
Im
w
to
I
3�895C _ — — — — -
LciM•vEi >.. E 2.0.1✓
6' S/W ALON PROP LINE-. -
nli J m rf»7 149 %To O/W
30' ROW
— — — _ -- -- — — NEW 1/2 T_71-T
T — —
— —
3 +00 4=00
30' ROW ( ,
I
STA 2 +25 22' LT
STREET LIGHT FIXTURE "L -1"
W 3'WX7'L CONCRETE PAD
W/ JUNCTION BOX PER CITY TYPICAL
DETAIL
240 VAC - 150WATT M -C -III PATTERN
LUMINAIRE PER CITY STANDARDS
USE 35' HIGH DAVIT POLE W/ 8' ARM LENGTH
FOR HIGH PRESSURE SODIUM VAPOR G.E. FIXTURE
STREET LIGHTING GENERAL NOTES
1. THE CONTRACTOR SHALL SUBMIT A REQUEST FOR MATERIALS APPROVAL
TO THE CITY OF RENTON PRIOR TO CONSTRUCTION.
2. AS -BUILT DRAWINGS WILL BE REQUIRED ON COMPLETION OF ALL PROJECTS.
3. THE CONTRACTOR SHALL NOTIFY ALL UTILITIES REGARDING THE
FACILITIES LOCATED WITHIN THE PROJECT LIMITS 48 HOURS PRIOR
TO GRADING AROUND OR UNERGORUD CROSSING OF UTILITIES.
4. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ANY DAMAGE TO THE
EXISTING UTILITIES. THE CONTRACTOR SHALL NOTIFY THE CITY IMMEDIATELY
UPON DAMAGE.
5. THE CONTRACTOR SHALL BE RESPONSIBLE TO INSTALL POLE I.D.
NUMBERS AS DIRECTED BY THE TRAFFIC ENGINEER. .
6. THE CONTRACTOR SHALL VERIFY THE LOCATION OF THE PUGET POWER SERVICE POINT.
7. THE LIGHT STANDARDS, JUNCTION BOXES, AND OTHER FIXTURES SHALL BE INSTALLED IN ACCORDANCE
WITH THE DETAILS HEREIN.
8. A PHOTOCELL SHALL BE INSTALLED ON LIGHT FIXTURE L -1.
9. NO HANDHOLES, POLES, OR JUNCTION BOXES SHALL BE LOCATED WITHIN THE SIDEWALK.
10. ALL MATERIALS AND WORKMANSHIP SHALL CONFORM TO THE STANDARDS AND SPECIFICATIONS
OF THE CITY OF RENTON AND THE 1991 STANDARD SPECIFICATIONS FOR ROAD, BRIDGE,
AND MUNICIPAL CONSTRUCTION 3Y WSDOT AND APWA, WASHINGTON STATE CHAPTER.
IT IS THE RESPONSIBILITY OF T. :E CONTRACTOR TO OBTAIN COPIES
OF THESE DOCUMENTS. IN THE CASE OF CONFLICTS, THE STANDARDS
AND SPECIFICATIONS OF THE CITY OF RENTON SHALL BE USED.
TRU -4/ -2053
BENCHMARK: CITY OF RENTON
SOUTHWEST CORNER OF CONC.
VAULT, CHISELED CROSS -
ELEVATION = 19.39
11. CONDUCTOR TYPE FOR LIGHTING CIRCUIT: USE -XLP;
CONDUCTOR TYPE FOR PHOTO CELL CIRCUIT: THHN
12. PROVIDE MINIMUM 8 TO 10 FEET CLEARANCE FROM LIGHT STANDARD
TO OVERHEAD POWER LINES. COORDINATE RELOCATION OF OVERHEAD POWER
WITH PUGET SOUND POWER AS REQUIRED.
13. ALL STREET LIGHTING CONDUIT SHALL HAVE A MINIMUM OF 24 INCHES COVER.
The
ykels Engineering Group Inc.
Consulting Engineers —Civil, Municipal, Subdivisions rN1.
P.O. Box 133 Kent, W'A 98035 -0133 (206) 631 -6598
alas
RECOMMENDED
APPROVAL
wa
7
FOR �
BY
T-
T i9
FS GIS�cFE
s %ONAL E
EXPlBES �iyi93
I CITY OF
RENTON