HomeMy WebLinkAboutT-26926BI
HOT DIPPED GALVANIZED
STEEL SPACERS, INSTALL
AND SIZE AS REQUIRED -
ATTACHMENT DOLT
PENETRATION LENGTH
4114" NBN. QYP.)
lPl co-w®
ITYPJ
A \ \\ NUMBER OF CLAMPS SHALL BE DETERMINED
BY NUMBER OF CONDUITS TO BE ATTACHED
W16' DIA 2 -19" LENGTH BOLT N TO UNISTRUT TYPE CHANNEL SUPPORT.
T SEE PLANS FOR CONDUIT ROUTING,
AND LOCK WASHER 'se• SHg4
AND NIR.(TYP.} A
.UNISTRUT TYPE CHANNEL SUPPORT DETAIL
NOT TO SCALE
/--LOWIT 0IA 2- 1N-LENGTH BOLT
WAS
CK HER UM
STRAP FOR CONDUIT
W" DIA 1 -VT LENGTH BOLT
r1 '
DETAIL A
(TYP)
zTmT'D
tc - 1 7624
HOT DIPPED GALVANIZED
STEEL SPACERS INSTALL
AND SIZE AS REQUIRED.
1-405 Coeruly Design- Suiidons
-i ;'- 0�
�`LEASEO POR CONSTF GTION
WIT DIA2 -11C ENGTH BOLT
MTH LOOK WASHER, FLAT
HASHER, AND NUT.(TYP.)
RIGID GALVANIZED STEEL CONDUIT
RIGID GALVANIZED STEEL
CONDUIT
N9MINSI
CONDUIT DIAMfIER
TRIry.
GALVANIZED STEEL STRAP
OUTSIDE INSIDE
4
4.U0 1 &050
GALVANIZED STEEL STRAP
NOTES:
MOUNTING HARDWARE DETAILS ARE FRONDED FOR ILLUSTRATIVE PURPOSES
t.
ONLY. THE :CONTRACTOR MAY PROPOSE GEOMETRIC ATTACHMENT. MOOIFICATIONS.
'SUBJECT TO APPROVAL BY THE ENGINEER.
DRILLING THROUGH REINFORCING.. STEEL IS NOT ALLOWED. IF STEEL IS HIT
MILE DRIWNG,THE LOCATION SHALL BE MOVED AND THE ABANDONED. HOLE
SHALL BE DRY PACKED WITH SANDICEMENT GROUT. THERE SHALL BE A: MINIMUM T
EDGE DISTANCE TO THE CENTERUNE OF ANCHOR HOLES IN CONCRETE. MOUNT
THE UNISTRUT TYPE SUPPORT USING AN APPROVED RESIN BONDED ANCHOR SYSTEM,
INSTALLED PER MANUFACTURERS RECOMMENDATION IN DRY CONDITIONS
RESIN BONDED ANCHORS SHALL BE STAINLESS STEEL AND SHALL BE A MINIMUM
OF 311WDIA UNLESS THE PLANS REQUIRE LARGER ANCHORS. (EXPANSION ANCHORS
ARE NOT ALLOWED)
.1.405
TS0.0 -26
r
TO SIR 169
A
STAGE WIDENING
p<
Washington State
Transportation
AND SR 515 INTERCHANGE
_
4-7
:Department of
" 2mtl
STRUCTURE MOUNTING DETAILS 2 OF 2
423