The URL can be used to link to this page

Home My WebLink AboutMFP20002670.pdfDEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT Major Franchise Permit: MFP20002670 IVR Number: 20002670 Permit Information Permit Name: Puget Sound Energy - Electric Address/Location:06/24/2020Application Date:0423059062Parcel Number: 1421 UNION AVE NE Permit Type:08/14/2020Issue Date:Franchise Permit Work Class:08/16/2021Expiration Date:Major Utility Job Number: 101117857Franchise Type:Electric Description: Puget Sound Energy Electric NE 11TH ST & UNION AVE NE Replace/install distribution poles and install OH/UG switches/reclosers to create a distribution automation scheme for increased reliability. REVISION: Replace P03. See attached plan. RESTORATION PER CITY OF RENTON STANDARDS Contacts Name Address PhoneTypeBilling Corrie Rydberg Puget Sound Energy 6905 S 228TH St KENT, WA 98032 C: (253) 905-5031ApplicantX Carli Bunkelman PSE/POTELCO - Billing 6905 S 228th St Kent, WA 98032 B: (253) 437-6708Contact NGUYEN KHOA D+KIM-ANH 330 QUINCY AVE NE RENTON , WA 98059 Owner General Conditions & Signature Permission is hereby given for the work described on this permit according to the conditions hereon and according to the approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton. Ÿ This permit and plans must be posted at the job site at all times.Ÿ I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to Renton Trench Restoration and Street Overlay Requirements. Ÿ Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY work in the Right of Way. Ÿ Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010) (Olympic Pipeline at 206.510.0575) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission pipeline company prior to performing any construction or excavation activities. This requirement to consult with the transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122. Ÿ (Date)(Signature) Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES DEPARTMENT OF PUBLIC WORKS Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 1 of 2 | Published: 1ϭ/Ϯϱ/2019 Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380 Website: rentonwa.gov TRAFFIC CONTROL PLAN (TCP) APPLICATION Published: 1ϭ/Ϯϱ/2019 TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION FOR REVIEW/APPROVAL NO LATER THAN FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK. The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a TCP and obtain City of Renton's approval of that plan when construction, repair, or maintenance work is to be conducted within the city's right-of-way. TO THE APPLICANT: Submit the TCP application form and required submittal documents to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name]” or the above address. The following items, electronic copies preferred, are all required for submittal of the TCP Application: 1.܆ A copy of the Traffic Control Plan (TCP) Application form. 2.܆ A copy of the required TCP layout, preferred 11” X 17” paper size format, which shall: ܆ Include map(s) showing the location of the project and work area. ܆ Be legible lettering and clear, contrasting, symbols of viewing or printing. ܆ Must indicate street names, and north arrow and scale. ܆ All signs and detour routes shall conform to the MUTCD, WSDOT TCPs, and the Washington State Traffic Control Flagger Certification handbook, by the Evergreen Safety Council. ܆ Types of plans required: ܆ Work hour plan – show all mobility impacts during construction hours. ܆ Non-work plan - show all mobility impacts after work hours when limited or no work is happening in the right-of-way (ROW), if applicable. ܆ Changing construction phases – show construction sequence and each construction phase change even if the traffic control is not modified, if applicable. ܆ Pedestrian access/detour plan, if applicable. Project Name: ______________________________________________ Permit #: _____________________ Project Address: ____________________________________________________________________________ Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________ Description of Work, Work Schedule, Equipment Used: _____________________________________________ ___________________________________________________________________________________________ ___________________________________________________________________________________________ Construction Company: ________________________________________ Phone/Cell: (_____) _____-________ Applicant Name: _________________________________ Email: ______________________________________ Business Address: _________________________________ City/State: __________________ Zip: __________ Approved By: _______________________________________________ Date: ________________________ Transportation Operations Engineering Scott Warlick CED 8/14/2020 Monday - Friday 8:00AM - 3:00PM MFP20002670 Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 2 of 2 | Published: 1ϭ/Ϯϱ/2019 APPLICANT AGREES TO ALL THE FOLLOWING: x TCP must be approved prior to commencing the work, and all permit conditions shall be met. x Existing pedestrian access shall be maintained. The work on pedestrian facilities shall be limited to one corner at a time, with the least possible inconvenience or delay to pedestrians. x Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery road conditions during work and non-work hours. x The start of Work Time begins when any street or travel lane is fully/partially closed or impacts the follow of traffic. This includes set up within the traveled way or immediately adjacent to the roadway. x Emergency services (253-852-2121) shall be notified twenty-four (24) hours before any street or lane closures. x Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public transit, to be affected by a temporary lane or road closure. x TCP for all street and/or lane closures shall be implemented and performed in compliance with the Manual on Uniform Traffic Control Devices (MUTCD) and/or State of Washington Department of Transportation (WSDOT) and all traffic regulations of the City of Renton and Revised Code of Washington (RCW). x Any lane or street closures not in conformance with the approved traffic control plan and/or without notification of emergency services may result in receiving a citation for violation of RCW 47.36.200 Signs or Flaggers at thoroughfare work sites and RCW 9A.36.050 Reckless Endangerment, and other applicable State and City codes. x Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all costs of defense and attorney’s fees incurred in defending against same, arising from and related to implementation of the approved traffic control plans including claims arising from towing of private vehicles and the acts of the Applicant’s agents and employees. x The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable attorney’s fees and litigation costs incurred resulting from such claim. x In the event any claim or suit is brought against the City within the scope of this Agreement, Applicant will pay for legal counsel chosen by the City to defend against same. x Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or pedestrian safety or travel. x Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council. x Approved Temporary TCP must be at the work site during work hours. x Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or walkway is impeded to safely redirect pedestrians around a work zone. x Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous place on the vehicle or equipment. In the case of Temporary No Parking Zones, all the following apply in addition to previous: x Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for vacate parking or curb lane usage. x Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block seventy-two (72) hours in advance of effective date and time. x The cover sheet of this TCP form must be attached to each Temporary No Parking Sign on the project site. x Temporary traffic control devices must be removed immediately when work is done or no construction activities are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555 NE 2nd Street; 425-430-7423). _______________________________ _______________________________ _______________________ Applicant’s Signature Print Name Date NE 11TH ST NE 10TH PLTACOMA AVE NE NE 11TH ST P01A P01 2020 2020 2020 151515151616 17171515 15151414UNION AVE NENE 11T H S T NE 10TH ST NE 10TH CT BUSSTOP BUSSTOP M6-2RIGHTKEEPR4-7BRIGHT KEEP R4-7B ROAD WORKAHEAD W20-1RIGHT SHOULDER CLOSED W21-5aRW1-4L200'200'200'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1 100'ROADWORKAHEADW20-1 100'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1W1-4R200'200'ROADWORKAHEADW20-1 100'R9-11SIDEWALK CLOSED AHEAD DETOUR M4-9bS/W CLOSED R9-9S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADPLACE SIGNS BOTH SIDES OF WORK AREA FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 000 0000 NO PARKINGNO-PAR K FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARKRESIDENT(S) WILL BE INFORMED OF TEMPORARY DRIVEWAY CLOSURE EMERGENCY VEHICLES WILL BE ALLOWED TO PASS WORK ZONE. N PSE PUGETSOUNDENERGY JOB#101117857 Union Ave NE & NE 11th St, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 1 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 LEGEND 28" TRAFFIC CONE SIGN LOCATION TRAFFIC FLOW POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. MFP20002670 NE 11TH ST NE 10TH PLTACOMA AVE NE P01A 2020 2020 151515151616 17171515 15151414UNION AVE NEUNION AVE NENE 11TH ST NE 10TH ST NE 10TH CT BUSSTOP BUS STOP BUSSTOP M6-2RIGHTKEEPR4-7BRIGHT KEEP R4-7B ROADWORK AHEAD W20-1RIGHTSHOULDERCLOSED W21-5aRW1-4L200'200'200'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1 100'ROADWORKAHEADW20-1 100'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1W1-4R200'200'ROADWORKAHEADW20-1 100'S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADR007-L R9-11SIDEWALK CLOSED AHEAD DETOUR M4-9bS/W CLOSED R9-9PLACE SIGNS BOTH SIDES OF WORK AREA FROMTOTOW AWAY AREAPHONE 888-9999 INFRASOURCE LLC 0 00 00 0000 0 NO PARKINGNO-PAR K FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PA R K N PSE PUGETSOUNDENERGY JOB#101117857 Union Ave NE & NE 11th St, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 2 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 LEGEND 28" TRAFFIC CONE SIGN LOCATION TRAFFIC FLOW POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. MFP20002670 UNION AVE NENE 14TH PL P02 UNION AVE NE141314 141314 121212111113111114122121 1010RIGHTKEEPR4-7BRIGHT KEEP R4-7BROADWORKAHEADW20-1RIGHTSHOULDERCLOSEDW21-5aRW1-4L200'200'200'ROAD WORK AHEAD W20-1W1-4R200'200'ROADWORKAHEADW20-1100' PLACE SIGNS BOTH SIDES OF WORK AREA FROMTOTOW AWAY AREAPHONE 888 -9999INFRASOURCE LLC 000 0 0000 00 NO PARKINGNO-PARK FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARKRESIDENT(S) WILL BE INFORMED OF TEMPORARY DRIVEWAY CLOSURE EMERGENCY VEHICLES WILL BE ALLOWED TO PASS WORK ZONE.M6-2ROADWORKAHEADW20-1350'ROADWORKAHEADW2 0 - 1 350 ' D E T O U R M4-9bR9-11SID E W A L K CL O S E D AH E A D S/WCLOSEDR9-9S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADNE S U N S E T S T N PSE PUGETSOUNDENERGY JOB#101117857 Union Ave NE & NE 11th St, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 3 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 LEGEND 28" TRAFFIC CONE SIGN LOCATION TRAFFIC FLOW POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. MFP20002670 FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARK UNION AVE NENE 24TH ST P03 NE 23RD PL PRIVATE DRIVE 20201515 17171515 12 12 1218 132ND AVE SEM6-2RIGHT KEEP R4-7BRIGHTKEEPR4-7BROADWORK AHEAD RD-WK-AHDW1-4R200'200'ROADWORKAHEADW20-1RIGHTSHOULDERCLOSEDW21-5aRW1-4L200'200'200'S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADDETOURM4-9bS/W CLOSEDR9-9R9-11SIDEWALK CLOSED AHEAD ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1 100'X'X'PLACE W20-1 SIGNS ON ALL ADJACENT STREETS WITHIN FEET OF WORK AREA ROAD WORK AHEAD W20-1ROADWORKAHEADW20-1N PSE PUGETSOUNDENERGY JOB#101117857 Union Ave NE & NE 11th St, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 4 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 LEGEND 28" TRAFFIC CONE SIGN LOCATION TRAFFIC FLOW POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. MFP20002670 NE 12TH STP04UNION AVE NE1313BUSSTOPBUSSTOP 1413141515BUSSTOPBUSSTOPNE 11TH PL STOP FLAGGER STOP FLAGGER ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4200'200'ROADWORKAHEADW20-1 W20-4ONE LANEROADAHEAD200'200'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'W20-7A100'RESIDENT(S) WILL BE INFORMED OFTEMPORARY DRIVEWAY CLOSUREEMERGENCY VEHICLES WILL BEALLOWED TO PASS WORK ZONE.MOVE BUS STOP 150' WEST. NOTIFYKING COUNTY METRO CONTACTEDAT 206-477-1150 FIVE DAYS INADVANCE OF SCHEDULED DATE.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857Union Ave NE & NE 12th Stl, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 5 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONELEGENDTRAFFIC FLOWSIGN LOCATIONFLAGGERSTOPPOLEWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 NE 7TH ST NE 7TH STMONROE AVE NENE 7TH STP051212 212117171717MONROE AVE NE BUS STOPBUSSTOP MONROE AVE NENE 7TH ST 11 11 11 10varNE 7TH STKIRKLAND AV NE161616161616 BUSSTOPBUSSTOPSTOP FLAGGERSTOPFLAGGER W20-7ARO A D WO R K AH E A D W20-1W20-4ON E L A N E RO A D AHE A D100'100'100'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'ROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4100'100'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4100'100'FLAGGERS WILL ASSISTPEDESTRIAN AROUNDWORK ZONER9-11SIDE W A L K CLOS E D AHEA D DE T O U RM4-9bS/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADMOVE BUS STOP 150' WEST. NOTIFYKING COUNTY METRO CONTACTEDAT 206-477-1150 FIVE DAYS INADVANCE OF SCHEDULED DATE.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#1011178573116 NE 7th St, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 6 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONELEGENDTRAFFIC FLOWSIGN LOCATIONFLAGGERSTOPPOLEWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 P06 KIRKLAND AVE NEKIRKLAND AVE NENE 9TH ST NE 10TH S T 1616 1818 17171717 1515STOP FLAGGER STOP FLAGGER W20-7AROAD WORK AHEAD W20-1W20-4ONE LANE ROADAHEAD100'100'100'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4100'100'ROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4 100'100'ROADWORKAHEADW20-1 100' RESIDENT(S) WILL BE INFORMED OF TEMPORARY DRIVEWAY CLOSURE EMERGENCY VEHICLES WILL BE ALLOWED TO PASS WORK ZONE. FLAGGERS WILL ASSIST PEDESTRIAN AROUND WORK ZONE R9-11SIDEWALKCLOSEDAHEADS/W CLOSEDR9-9S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADN PSE PUGETSOUNDENERGY JOB#101117857 912 Kirkland Ave NE, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 7 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. 28" TRAFFIC CONE LEGEND TRAFFIC FLOW SIGN LOCATION FLAGGER STOP POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY MFP20002670 NE 11TH PL P07101010101818 5 13 11 10LYNNWOOD AVE NENE 12TH ST 17171616 STOP FLAGGER STOP FLAGGER STOP FLAGGER W20-7AROAD WORK AHEAD W20-1W20-4ONE LANEROADAHEAD 100'100'100'W20-7 A ROA DWORK A H E AD W20- 1 B E PR E P A R ED TOST O P W3-4100'100'100'ROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4 100'100'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4100'100'W20-7A100'PLACE SIGNS BOTH SIDES OF WORK AREA FROMTOTOW AWAY AREAPHONE 888-9999 INFRASOURCE LLC 000 00000 00 NO PARKINGNO-PARK FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PA R K FLAGGERS WILL ASSIST PEDESTRIAN AROUND WORK ZONES/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADS/W CLOSED R9-9R9-11SIDEWALK CLOSED AHEAD N PSE PUGETSOUNDENERGY JOB#101117857 912 Kirkland Ave NE, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 8 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. 28" TRAFFIC CONE LEGEND TRAFFIC FLOW SIGN LOCATION FLAGGER STOP POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY MFP20002670 NE 7TH STINDEX PL NEP08NE 7TH ST1616STOP FLAGGER STOP FLAGGER W20-7AROAD WORK AHEAD W20-1W20-4ONE LAN E ROAD AHEAD 100'100'100'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'W20-7AROADWORKAHEAD W20-1 BEPREPAREDTOSTOPW3-4100'100'100'S/W CLOSEDR9-9S/WCLOSEDR9-9R9-11SIDEWA L K CLOSED AHEADR9-11SIDEWALKCLOSEDAHEADPLACE SIGNSBOTH SIDES OFWORK AREAFROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARKFROM TO TOW AWAY AREA PHONE 888-9999 INFRASOURCE LLC 000 0000000 NO PARKING NO-PARK FLAGGERS WILL ASSISTPEDESTRIAN AROUNDWORK ZONERESIDENT(S) WILL BE INFORMED OFTEMPORARY DRIVEWAY CLOSUREEMERGENCY VEHICLES WILL BEALLOWED TO PASS WORK ZONE.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857NE 7th St & Index Pl NE, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 9 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONELEGENDTRAFFIC FLOWSIGN LOCATIONFLAGGERSTOPPOLEWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 FROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARKP09 NE 4TH ST JEFFERSON AVE NEIN D E X A V E N E NE 4TH S T NE 3RD ST JEF F E R S O N A V E N E1818131317 17 17 17 2222BUSSTOP 20 1212 1 1 1 1 1 1 1 0 1 0 1011111111STOP FLAGGER STOP FLAGGERS/WCLOSEDR9-9DETOURM4-9bS/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADW20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'W2 0 - 7 AROADWORKAHEADW2 0 - 1 BEPREPAREDTOSTOPW3 - 4 100' 100' 100 ' W20-7AROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4 100'100'100'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100' 1 0 0 ' 100'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4350' 350' R O A D W O R K A H E A D W20-1 B E P R E P A R E D T O ST O P W3-4350'350'RESIDENT(S) WILL BE INFORMED OF TEMPORARY DRIVEWAY CLOSURE EMERGENCY VEHICLES WILL BE ALLOWED TO PASS WORK ZONE. FLAGGERS WILL ASSIST PEDESTRIAN AROUND WORK ZONE N PSE PUGETSOUNDENERGY JOB#101117857 NE 4th st & Jefferson Ave NE, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 10 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. 28" TRAFFIC CONE LEGEND TRAFFIC FLOW SIGN LOCATION FLAGGER STOP POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY MFP20002670 NE 4TH STNE 4TH STOLYMPIA AVE NEP10P10BP10A10 10 10 1010 10 10 1010 10 11 10 10ONLY10 10 11 10 10ONLYMONROE AVE NENE 4TH STBUSSTOP1616ARRW-BRD ROADWORKAHEADW20-1350'350'350'RIGHT LANECLOSEDAHEADW20-5RW4-2LROADWORKAHEADW20-1350'ROADWORKAHEADW20-1 350' ROAD WORKAHEAD W20-1350'S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADDETOURM4-9bS/WCLOSEDR9-9R9-11SIDEWALK CLOSED AHEAD DETOURM4-9bPLACE PDETOUR SIGNS AT CROSSWALK/INTERSECTION EAST/SOUTH OF QUEEN AVE NE &NE 4TH ST.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857NE 4th St & Olympia Ave NE, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 11 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONETRAFFIC FLOWSIGN LOCATIONLEGENDPOLECHEVRONARROW BOARDWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 NE 4TH STNE 4TH STOLYMPIA AVE NEP10P10B10 10 10 1010 10 10 1010 10 11 10 10ONLY10 10 11 10 10ONLYMONROE AVE NENE 4TH ST1616ARRW-BRD S/WCLOSEDR9-9S/WCLOSEDR9-9ROADWORKAHEADW20-1350'RIGHT LANECLOSEDAHEADW20-5RW4-2L350'350'ROADWORKAHEADW20-1350'ROADWORKAHEADW20-1 350'ROADWORKAHEADW20-1100' ROAD WORKAHEAD W20-1350'R9-11SIDEWALKCLOSEDAHEADDETOURM4-9bS/W CLOSEDR9-9R9-11SIDEWALK CLOSED AHEAD DETOURM4-9bPLACE PDETOUR SIGNS AT CROSSWALK/INTERSECTION EAST/SOUTH OF QUEEN AVE NE &NE 4TH ST.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857NE 4th St & Olympia Ave NE, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 12 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONETRAFFIC FLOWSIGN LOCATIONLEGENDPOLECHEVRONARROW BOARDWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 P11 SUNSET BLVD NENE 9TH CT N E 9 TH S TABERDEEN AVE NE12121111 1111 1212 1118 STOP FLAGGER STOP FLAGGER STOP FLAGGERW20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD100'100'100'W20-7AROAD WORK AHEAD W20-1BEPREPA R E D TOSTOP W3-4200'200'200'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-410 0 ' 100 'W20-7AROADWORKAHEADW20-1W20-4ONE LANEROADAHEAD200'200'200'W20-7A FROM TO TOW AWAY AREA PHONE 888-9999 INFRASOURCE LLC 000 0000000 NO PARKING NO-PARK N PSE PUGETSOUNDENERGY JOB#101117857 Aberdeen Ave NE & Sunset Blvd NE, Renton, WA 98056 6/4/2020 safaa.alneema@pse.com (425) 398-6077 SHEET 13 of 15 Puget Sound Energy Traffic Control Supervisor: Stephen R Gadke Card No. 010741 Exp.5/31/2021 stephen.gadke@pse.com (425) 424-6431 TEMPORARY TRAFFIC CONTROL PLAN CHANNELIZATION DEVICE SPACING MPH 55/70 35/45 25/30 TAPER 40 30 20 TANGENT 80 60 40 55 + 60/65 45/55 35/40 30 25 SIGN SPACING "X" 800 500' 350' 200' 100' MINIMUM TAPER LENGTH=L (FT.) LANE WIDTH 10 11 12 20 70 75 80 25 105 115 125 30 150 165 180 35 205 225 245 40 270 295 320 45 475 495 540 POSTED SPEED (MPH) 50 500 550 600 55 550 605 660 60 - 660 720 65 - - 780 70 - - 840 Notes: 1. All signs and spacing to conform to the MUTCD and City of Renton standards. 2. All sidewalks, driveways, exits and egresses shall be completely clear unless otherwise indicated. 3. Channelizing devices are 28" traffic cones. Use traffic drums (barrels) with steady burning Type C lights on all State State Routes and Hwys. 4. Sign size can be a minimum of 36" x 36" and shall not obstruct pedestrian access. 5. Crew is required to leave a minimum of 11' for traveling lane width. 6. Alert affected residents and businesses. 7. Work to take place between 9 a.m. and 4 p.m unless otherwise specified. All work for arterials and major roadways will be from 9 a.m. to 3 p.m. 28" TRAFFIC CONE LEGEND TRAFFIC FLOW SIGN LOCATION FLAGGER STOP POLE WORK VEHICLE/ FLASHING LIGHTS RIGHT OF WAY MFP20002670 SW110 10 10 10 10 10 10 10 10111111111011111111NE S UN SET B L VD NE SUNSE T B LV D1717 10 10 10 1010 10 10 10 161610 10 10 1017171818NE 12TH STKIRKLAND AVE NEKIRKLAND AVE NENE 12TH STJEFFERSON AVE NEHARRINGTON PL NE ARRW-BRD ROADWORK AHEAD W20-1100'100'100'RIGHT LANECLOSEDAHEAD W20-5RW4-2LROADWORKAHEADW20-135 0 'ROADWORKAHEADW 2 0 - 1 350 'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1100'ROADWORKAHEADW20-1 100' S/W CLOSED R9-9DETOUR M4-9bR9-11SIDEWALK CLOSED AHEAD S/WCLOSEDR9-9R9-11SIDEWALKCLOSEDAHEADDETOURM4-9bPLACE PDETOUR SIGNS ATCROSSWALK/ INTERSECTION EAST,/NORTH OF HARRINGTON AVE NE &NE 12TH ST.NPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857NE 4th St & Olympia Ave NE, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 14 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONETRAFFIC FLOWSIGN LOCATIONLEGENDPOLECHEVRONARROW BOARDWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 1111111616 NE 7TH STSUNSET BLVD NE 111111131312121414 ABERDEEN AVE NE NE 6TH PL P12STOP FLAGGERSTOP FLAGGER W20-7AROAD WORK AHEAD W20-1W20-4ONE LANE ROADAHEAD100'100'100'ROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4100'100'ROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4100'100'W20-7AROADWORKAHEADW20-1BEPREPAREDTOSTOPW3-4200' 200'200' W20-7AROADWORKAHEADW20-1 BEPREPAREDTOSTOPW3-4 200' 200'200'PLACE SIGNSBOTH SIDES OFWORK AREAFROMTOTOW AWAY AREAPHONE 888-9999INFRASOURCE LLC 000 0000000NO PARKINGNO-PARK FROM TO TOW AWAY AREA PHONE 888-9999 INFRASOURCE LLC 000 0000000 NO PARKING NO-PARKRESIDENT(S) WILL BE INFORMED OFTEMPORARY DRIVEWAY CLOSUREEMERGENCY VEHICLES WILL BEALLOWED TO PASS WORK ZONE.DETOURM4-9bS/WCLOSEDR9-9S/W CLOSEDR9-9FLAGGERS WILL ASSISTPEDESTRIAN AROUNDWORK ZONENPuget Sound EnergyTraffic Control Supervisor:Stephen R GadkeCard No. 010741Exp.5/31/2021stephen.gadke@pse.com(425) 424-6431TEMPORARY TRAFFIC CONTROL PLANPSEPUGETSOUNDENERGYJOB#101117857NE 4th St & Olympia Ave NE, Renton, WA 980566/4/2020safaa.alneema@pse.com(425) 398-6077SHEET 15 of 15CHANNELIZATIONDEVICE SPACINGMPH55/7035/4525/30TAPER403020TANGENT80604055 +60/6545/5535/403025SIGN SPACING"X"800500'350'200'100'MINIMUM TAPER LENGTH=L (FT.)LANEWIDTH101112207075802510511512530150165180352052252454027029532045475495540POSTED SPEED (MPH)505005506005555060566060-66072065--78070--840Notes:1. All signs and spacing to conform to theMUTCD and City of Renton standards.2. All sidewalks, driveways, exits and egressesshall be completely clear unless otherwise indicated.3. Channelizing devices are 28" traffic cones.Use traffic drums (barrels) with steady burningType C lights on all State State Routes and Hwys.4. Sign size can be a minimum of 36" x 36" andshall not obstruct pedestrian access.5. Crew is required to leave a minimum of 11' fortraveling lane width.6. Alert affected residents and businesses.7. Work to take place between 9 a.m. and 4 p.munless otherwise specified. All work for arterialsand major roadways will be from 9 a.m. to 3 p.m.28" TRAFFIC CONELEGENDTRAFFIC FLOWSIGN LOCATIONFLAGGERSTOPPOLEWORK VEHICLE/FLASHING LIGHTSRIGHT OF WAYMFP20002670 P03* *** ** * ** * ** P02 P01 P04P07 SW1 P06 P05 P08 P10P09 P11 *P12 N Vicinity Map 101117857-R3ARE TO BE INSTALLED, CROSS SECTION DETAILS OF THE TYPICAL EROSION STRUCTURES, & SPECIAL REQUIREMENTS FOR WORK IN SENSITIVE AREAS.) EROSION & SEDIMENT CONTROL REQUIREMENTS NOTES DETAILING WHERE EROSION OR SEDIMENT CONTROL STRUCTURES (LOCAL JURISDICTIONS MAY HAVE ADDITIONAL REQUIREMENTS INCLUDING 0150.3200 TECHNIQUES FOR TEMPORARY EROSION & SEDIMENT CONTROL EROSION & SEDIMENT CONTROL SHALL BE PER PSE STANDARD PRACTICE & ANY ADDITIONAL LOCAL JURISDICTION REQUIREMENTS. FOREMAN (CHECK BOX WHEN COMPLETED) PSE Equipment LOCKED/SECURED & Work Area left in CLEAN/SAFE Condition. Grid, Cable, and Switch numbers INSTALLED & VERIFIED. Field Changes RED-LINED on As-built. Indicate correct FUSE SIZE on As-built & VERIFY proper PHASE. Foreman's Signature _______________________________________________ Print Name ___________________________________ Date ______________ Material VERIFIED and CHANGES noted on Paperwork. Total PRIMARY Cable noted on As-built. Company ID#'s RECORDED in correct location on As-built. Deviations noted on the As-built and their reason. I certify that the work performed meets PSE's standards and procedures and that all quality requirements are met. No No No Yes Yes Yes "Flagging Required" "Outages Required" "Locates Required" 101117857 PRE-14 DA SWITCHES Owner / Developer Contact Info officeATTN: N/A N/A N/A COLIN O'BRIEN 425.457.5377PHONE CABLE TV 11475544 101117857 N/A 593204224 N/A 108... PROJECT PHASE PWR NOTIF#ORDER# Superior Removal OH Expense LEGEND CONDUIT RISER OVERHEAD TRANSFORMER JUNCTION VAULT/JUNCTION BOX NEW CONDUCTOR AND OR TRENCH LINE DISCONNECT - FUSED PULL VAULT OR SPLICE VAULT EXISTING POLE DOWN GUY DISCONNECT - UNFUSED NEW POLE PADMOUNT TRANSFORMER SECONDARY HANDHOLE EXISTING CONDUCTOR TO BE REMOVED OR ABANDONED STREET LIGHT TOTAL UNDERGROUND TRANSFORMER ENERGY CUSTOMER DEMAND POINT OR OR OR OVERHEAD JUMPER CONNECTION THIS SKETCH NOT TO BE RELIED UPON FOR EXACT LOCATION OF EXISTING FACILITIES CALL 811 TWO BUSINESS DAYS BEFORE YOU DIG For contacts below dial 1-888-CALL PSE (225-5773) RECLOSER GOOGLE MAPS UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 1 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A GENERAL SPECIFICATIONS Project Information: Project Name: 2405E053 DA EGT-12 Notification Number: 11428792 WBS # Distribution Electric -E-Distribution Automation - Dist: R.10009.12.03.01 for 2019 CAPITAL: $ 1,115,833 R.10009.12.03.05 for 2019 OMRC: $ 45,767 System Planner and phone number: Bill Foster (425) 456-2750 Conceptual Estimate: CAP: $ 1,161K Required In-Service Date: 2019 Location- City/County: Bellevue /KING Is this a multi year project or revision to previous scope (Y/N):N Project Justification: This project is to improve the performance of President Park circuit 14 which has 5 outages in the 2013 -2017 study period (4 are Non-Storm) with the other proposed Circuits having a total 7 outages (6 non-storm). Project Summary: This project is to improve the performance of President Park circuit 14 which has 5 circuit outages between 2013 and 2017. A Distribution Automation scheme is proposed dividing the circuit into 2 Zones with an additional 2 zones to the north. Zone 1 will be between PRE PCB-14 and X11162# Zone 2 will be between X11162# and X355 (NO with HIG-13) Additional zones north of X188 and north of X11161 will be upgraded to SCADA but not part of DA. Zone 3 will be between PRE PCB-11 and X676 Zone 4 will be between X676, X77904, X1929 (NO with HIG-16), and X363 (NO with PRE-12) Zone 5 will be between X77904 and X569 (NO with HIG-13) Zone 6 will be between PRE PCB-12 and X1928# Zone 7 will be between X1928# and X363 (NO with PRE-11) Zone 8 will be between HIG PCB-16 and REC #1# Zone 9 will be between REC #1# and X678 Zone 10 will be between X678 and X1929 (NO with PRE-11) Zone 11 will be between HIG PCB-13 and U1925 Zone 12 will be between U1925 and X569 (NO with PRE-11), X355 (NO with PRE-14) Design Detail: This project will install 10 new SCADA Reclosers, change out recloser controllers to SCADA at 1 location and replace a PMH-9 pad mount switch to SCADA unit to help isolate problem area. The Project team will evaluate and defined how each substation breaker will be handled to allow this automation to occur. On President Park 14 (PRE-14): In the area of X11162, located on transmission pole 17\2, grid 318564-167127 Replace the GOPI with a new Recloser and Controller. While this location works fine for this DA scheme Planning believes pole 318535-167128 might be a location with better location for parking. If this location is preferred planning would encourage keeping the same switch number for this location since it circuit functionally is the same. At X0188 located on pole grid 318711-167123, replace the existing controller if necessary with a new unit that has SCADA capability. NOTE this location (and X11161 will not be part of this Distribution Automation scheme but will provide an additional segment of protection when settings are coordinated. At X11161 located on pole grid 319027-167130, replace the GOPI with a new Recloser and Controller and extend TPX from pole grid# 319006-167130. NOTE this location (and X0188 will not be part of this Distribution Automation scheme but will provide an additional segment of protection when settings are coordinated. At X355 located on grid 318639-167103 (Normal Open between PRE-14 & HIG-13), replace the GOPI with a new Recloser and Controller and use TPX from the 25 kVA transformer at grid# 318635-167126. On President Park 11 (PRE-11): At X0676 located at grid 318352-166830, Replace whatever is necessary to make this Recloser & Controller SCADA enabled. At X77904 located on grid 318464-166801, replace the GOPI with a new Recloser and Controller and use TPX from the 50 kVA transformer at grid# 318449-166801. At X569 located on grid 318626-166846(Normal Open between PRE-11 & HIG-13), replace the GOPI with a new Recloser and Controller and install TPX from the 37.5 kVA transformer at grid# 318613-166827. At X1929 located on grid 318320-166761(Normal Open between PRE-11 & HIG-16), replace the GOPI with a new Recloser and Controller and use TPX from the 100 kVA transformer at grid# 318326-166782. At X363 located on grid 318128-166766 (Normal Open between PRE-11 & PRE-12), replace the GOPI with a new Recloser and Controller and use TPX from the 25 kVA transformer at grid# 318142-166770. On President Park 12 (PRE-12): In the area of X1928, located on grid 318113-166892 replace the GOPI with a new Recloser and Controller. While this location works fine for this DA scheme Planning believes pole 318113-166910 might be a better location for parking. It might may make sense to replace pole this to the east for good extended access. If this location is preferred planning would encourage keeping the same switch number for this location since it circuit functionally is the same. On Highlands 16 (HIG-16): Install REC #1 in the area of south of grid 318495-166472 Install a new pole, with a new Recloser and Controller. Intercept and use TPX from the 25 kVA transformer at grid# 318495-166472. Communication with the City of Renton should be made prior to permitting to discuss the value of this Distribution Automation project to the community and this location. On Highlands 13 (HIG-13): At U1925 grid# 318650-166771, replace PME-9 with a pad mount SCADA VISTA 422. Install a 507 vault with a non-skid lid for a 25 kVA transformer near Jbox 318649-166771 and connect with a C phase 1/0 cable. Trench conduit and TPX to provide a 120V power to switch LVE. Infrastructure Impacts: List units added by this project Reclosers: 12 SCADA units Switches: 1 pad mount SCADA 422 units Construction Criteria: Engineers are to review ownership of all poles they are planning to replace early in the process so that ample time can be provided in notifying foreign pole owners. Replace or add poles as needed with poles of sufficient class, height and condition to accommodate the reconductor. Any 40' pole requiring replacement will be replaced with minimum 45' pole where possible. If a pole is replaced, transfer existing equipment to new pole where possible and where existing condition is in good condition. Fuse all unfused laterals and request switch numbers for all non-numbered devices. Coordinate tree trimming/mowing and access construction as required. Replace all double bushing, leaking, and rusting transformers. Ensure that all grasshopper fuses are replaced with appropriately sized fuses. Replace all Open-wire secondary with triplex. Remove all secondary cross arms and splice all services to the poles. Install grid number boards on all PSE poles where they're missing. Install new OH switches and/or switch number boards at all lateral fuse locations where missing and required by PSE standards. Install stirrups as required within the replacement area. Replace all brown glass insulators. Provide for tree trimming as required. Replace all trip-o-link cutouts with link-break type. Regarding the entire project: Provide planner with preliminary work sketch prior to permitting and a final work sketch when project is released to POTELCO. Please notify Planner when the project is scheduled, then complete. Keep Planner notified of correspondence with ROW. General -All work is to be completed per PSE Standards & Practices. Copies of all PSE Standards are available upon request. -Work sites shall be kept clear of debris and all construction materials; equipment and packing shall be removed daily. -Return all unused and removed poles, transformers and hardware to PSE, storeroom. All copper shall be coiled and returned the day it is removed from the poles. Remove all unused pins and insulators. -Return all streetlights, area lights and floodlights to Sumner yard. Preconstruction - Notify appropriate city, County or DOT authorities 48 to 72 hours, or as required by permitting agency, in advance of starting work in Right-of-way involving a Permit. - All system switching shall be approved by System Operations (425-882-4652) a minimum of 48 hours in advance. - Notify customers of all outages 48 hours in advance. Work Drawings & Documents - Field design changes shall be approved by PSE Project Manager or Engineer. - Mark all field changes, equipment ID numbers and Underground cable information in red on Foreman's copy of worksketch. - Return one Foreman's copy of worksketch to Project Manager at completion of job. - When permits are required, a copy shall be available on work site at all times. Safety - Refer to PSE standards 6275.3000 and 6275.6000 for system ground requirements. - Refer to PSE standards 6275.9050 for personal protective grounding requirements. - Refer to PSE standards 6275.9150 for vehicle grounding and barricading requirements. - Proper line clearances shall be taken at the beginning, and released at the end, of each work day, or as otherwise instructed by the System Operator. - Provide signs, barricades, and traffic control in conformance with permit regulations. - Utilize flagging and other vehicle traffic control as necessary and in conformance with local traffic regulations. - Maintain traffic flow as required by permitting agency. Erosion & Sediment Control - Refer to PSE standards 0150.3200 for minimum requirements. - Comply with all requirements of permitting agency. - Installed erosion & sediment devices shall be maintained until vegetation has been re-established or disturbed soil has been otherwise permanently stabilized. Joint Facilities - Coordinate with Communication Companies for transfers. TOP VIEW FLOWING DITCH or BODY OD WATER SLOPE Secure bottom of fence with gravel bags Place straw mulch on disturbed areaExcavated or Augered Hole Pole SLOPE Install silt fence around pole excavation UTILITY POLE EROSION CONTROL DETAIL Not to scale Adjacent to flowing ditches or bodies of water E-Mail: Cell Phone: Project Manager Contact Information: Manager:NICK COULSON 425.495.0982 nick.coulson@pse.com U-MAPS & 1/4 SECTIONS 2305E010 NW 03-23-05 2305E011 SW 03-23-05 2305E013 NE 04-23-05 2305E015 SW 04-23-05 2305E016 SE 04-23-05 2305E029 NE 08-23-05 2305E033 NE 09-23-05 2305E034 NW 09-23-05 2305E035 SW 09-23-05 2305E036 SE 09-23-05 2305E038 NW 10-23-05 2305E061 NE 16-23-05 2305E062 NW 16-23-05 2305E032 SE 8-23-05 OH MAPS UG MAPS 2305E040 2305E088 OVERHEAD CONSTRUCTION Poles & Structures -Poles are to be installed or relocated as staked. Unless otherwise noted, all pole location measurements are from the center of the pole. -All new poles set shall be the class indicated on the sketch, or better. Do not set a lower class pole than specified. -Install ground plate assembly on all new poles. Install Switch Ground Assembly per standard specification 6014.1000 at new gang operated switch locations. -Install grid numbers on all new and existing poles as shown on sketch. -Straighten existing poles as indicated or as necessary. -Treat all field-drilled poles with copper napthenate wood preservative. -Remove old poles after communication companies have transferred off and return to PSE storeroom. Fill and crown pole holes and restore area similar to adjacent landscaping. Conductors & Equipment -Transfer all overhead and underground primary, secondary and service conductors and guys to new poles set, unless otherwise indicated on this sketch. -Transfer existing transformers to new poles unless otherwise indicated on this sketch. -Use stirrups to connect all overhead and underground primary taps, and all transformers. Install at all sites being worked within the scope of the project where they are currently missing. -Use 397 AAC and Ampact connectors for all bare conductor feeder jumpers and 600 amp switch jumpers. Install tree wire conductor for jumpers on all poles that are double deadended with tree wire. -Apply grit inhibitor on all Ampact, stirrup, and dead-end connections. -Connect primary taps and transformers to same phase as existing unless otherwise shown on the drawing. -All neutral connections to be made with solid compression connectors. Connect all pole grounds to common neutral. -Use Load-interrupter cutouts (with arc shields) on all primary overhead and underground taps with fused protection above 40T. -Install Wildlife Protectors on all transformers. HIG-13,-16 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW 3.4.2020 D.N.90% REVIEW 1.6.2021 D.N.CONSTRUCTION DOCUMENTS MFP20002670 * *** * * * ** * * * *101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 2 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A OVERHEAD CIRCUIT - BEFORE SCALE: N.T.S. P03 P02 P04 P01 HIG-13,-16 P10 P09 P08 P05 P06 P07 SW1 P11 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P12 3.4.2020 D.N.90% REVIEW MFP20002670 R X188DA RX11161DA R X355DA NO R X0676DA R X77904DARX569DA R X1929DA NO RX363DA R X1928DA R X82214DAS U1925DA X11162DAR X678DA R 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 3 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A OVERHEAD CIRCUIT - AFTER SCALE: N.T.S. SW1 P04 P01 HIG-13,-16 P02 P07 P06 P05 P08 P09 P10 P03 P11 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW 3.4.2020 D.N.90% REVIEW MFP20002670 PRE 14 P01ABCN 318535-167128 T17\3 318549-16712725kVA 120/240v25TUNK P01A 318564-167127T17/2X11162 318532-167123 336.4MCMACSR336.4MCMACSRABCNSHUFFLETON-PRESIDENT PARK1101 4100 4103 4101 X11162 DA 318535-167128 P01B 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 4 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P01 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P01A (318564-167127) EX. 65' CL 1, 1960 POLE TO BE REMAIN REMOVE EXISTING GANG OPERATED SWITCH, SW #X11162 2-24R x 2 -TRANSFER SW # X11162 TO RECLOSER ON POLE P01 PROVIDE JUMPER CONNECTION TO CONTINUE CIRCUIT -INSTALL (3) INSULATORS ON PRIMARY ARMS PER STD 6015.1000 (INDCSA) -INSTALL #4/0 JUMPER CABLES (MID 8454500) -INSTALL (3) #4/0 WEDGES (MID 2368200) P01B (31859-167129) FOR REFERENCE ONLY P01 (318535-167128) EX. 85' CL H1, 2019 POLE TO REMAIN INST 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH #X11162 DA BUILD GROUND BUS UNDER CUTOUT ARM SIMILAR TO STD 6043.1020 FIG 5 -INSTALL (2) 4" RIGID CLEVIS (INDNRC) -INSTALL "C" CONNECTORS (MID 2162700) -INSTALL #4/0 SD BARE CU JUMPERS FROM NEUTRAL TO BUS (MID 8595700) -INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P01B ON CIRCUIT PRE-14 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P01B Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P01 318535-167128 15.5kV Viper Recloser Not To Scale 9946807 3.4.2020 D.N.90% REVIEW MFP20002670 PRE 14 P02 X188 DA318711-167123X188R 318708-167123 318725-16712337.5kVA 120/240v25TUNK 4/0ACSR4/0ACSR1415 1421 1433 1409 P02A AØADG351 ABCN ABC ABCN AØ43634 BØ43635 CØ43636 40T X1466 318705-16712875kVA 120/240v TR2 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 5 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P02 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: TR2 (318705-167128) FOR REFERENCE ONLY P02A (318708-167123) FOR REFERENCE ONLY P02 (318711-167123) EX. 45' CL UNK, 1973 POLE TO REMAIN REMOVE EXISTING SEL351R RECLOSER CONTROLLER 2-24R INST SEL651RA RECLOSER CONTROLLER (MID 9999667) PER STD 6023.1020 2-24N RE-ASSIGN SWITCH # X188 DA RECLOSER IS POWERED WITH TRIPLEX SOURCED FROM TR2 ON CIRCUIT PRE-14 RECLOSER IS ORIENTED WITH SOURCE TERMINALS FACING POLE P02A 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW 3.4.2020 D.N.90% REVIEW Site: Grid #: Controller Company ID#: Controller Material ID#: Foreman to redline the following information kV Rating: CONTROLLER REMOVED 12kV P02 318711-167123 Site: Grid #: Controller Company ID#: Controller Material ID#: Foreman to redline the following information kV Rating: CONTROLLER INSTALLED 12kV 9999667 P02 318711-167123 MFP20002670 PRE 14 P03 NW 03-23-05(2305E010)SE 04-23-05(2305E013)P03A AØAFS975 BØAFS976 CØAFS977 CRP10 319027-167130X11161X11161 DA 319006-167130100TX3578 319014-167134 BØ25304 ABCN4/0ACSRABCN to GRID 319041-167131319041-167131100TUNK 4/0ACSR2401 2407 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 6 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P03 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P03A (319006-167130) FOR REFERENCE ONLY P03 (319027-167130) EX. 50' CL 3, 2010 POLE TO BE REPLACED REMOVE EXISTING GANG OPERATED SWITCH, SW#X11161 2-24R x 2 INSTALL 50 FOOT CLASS H1 OR BETTER POLE PER STD 6010.1000 (PD50H1) 2-23 -INSTALL 1 FEET (SE) AWAY FROM EXISTING POLE INSTALL 600A G&W VOLTAGE SENSOR IN-LINE WINGARM RECLOSER (MID 9946808) PER STD 6023.1030 (REC15VGWWI) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH# X11161 DA BUILD GROUND BUS UNDER CUTOUT ARM SIMILAR TO STD 6043.1020 FIG 5 -INSTALL (2) 4" RIGID CLEVIS (INDNRC) -INSTALL "C" CONNECTORS (MID 2162700) -INSTALL #4/0 SD BARE CU JUMPERS FROM NEUTRAL TO BUS (MID 8595700) -INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P03A ON CIRCUIT PRE-14 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P03A Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946808 9999667 600 A TERMINAL POLE (GROUND BUS EXAMPLE) 6043.1020, Fig. 5 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P03 319027-167130 15.5kV RECLOSER 800 A FOR WINGARM Not To Scale 9946808 3.4.2020 D.N.90% REVIEW POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P03 319027-167130 50 H1 POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P03 319027-167130 50 3 2010 MFP20002670 PRE 14P04 HIG 13 NO 318638-167121 318639-167103X355 318639-167091 25kVA 120/240v ABC 336.4MCMACSR 40184010 0 ABCCBA336.4MCMACSR INSTALL 4" HMA ASPHALT PER CITY OF RENTON STANDARDS TO CREATE 30'x4'x4" DEEP PULL OFF AREA P04 NO 318639-167110X355 DA 318640-167126 318635-167126T16/6X25kVA 120/240v P04 70'101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 7 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P04 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P04A (318638-167121) FOR REFERENCE ONLY P04 (318639-167103) EX. 45' CL UNK, 1960 POLE TO BE REPLACED REMOVE EXISTING N.O. GANG OPERATED SWITCH, SW #X355 2-24R x 2 INSTALL 50 FOOT CLASS H1 OR BETTER POLE PER STD 6010.1000 (PD50H1) 2-23 -INSTALL 70 FEET (E) AWAY FROM EXISTING POLE -RENAME POLE 318639-167110 INST 9' 3PH DBL DE ASSY PER STD 6033.1046 (DDE3315) INSTALL N.O. 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH #X355 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P04A ON CIRCUIT PRE-14 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P04A INST OVERHEAD BRIDLE SVC PER STD 6024.1000 (BSTPX) -INSTALL TO SVC ADRESS 4010 NE 12TH ST RENTON 98056 INST 10" SINGLE HELIX ANCHOR EAST L=15' PER STD 6012.1000 (ANDH1) INST 3/8" PRI DOWN GUY EAST L=15' PER STD 6013.0100 (GYD3SA) INST 3/8" NEU DOWN GUY EAST L=15' PER STD 6013.0100 (GYD3SAN) TRANSFER NEUTRAL TRANSFER OH SVC COMM TO TRANSFER COMM RISER INSTALL GRID # TOP EXISTING POLE 1' ABOVE COMMUNICATIONS REMOVE EXISITNG POLE AFTER ALL COMMUNICATIONS HAVE TRANSFERRED 2-129 POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P04 318639-167110 50 H1 POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P04 318639-167103 45 UNK 1960 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P04 318639-167110 3.4.2020 D.N.90% REVIEW MFP20002670 PRE 11 P05 318351-16682310kVA 120/240v 318352-166830X0676RHLWS X0676 DA 318363-16684965TUNK 318355-166843 336.4MC M A C S R 336.4MCMACSR 3000 32043116 3110 756 P05A 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 8 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P05 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P05A (318363-166849) FOR REFERENCE ONLY P05 (318352-166830) EX. 50' CL H1, 2016 POLE TO REMAIN REMOVE EXISTING SEL351R RECLOSER CONTROLLER 2-24R INST SEL651RA RECLOSER CONTROLLER (MID 9999667) PER STD 6023.1020 2-24N RE-ASSIGN SWITCH #X0676 DA RECLOSER IS POWERED WITH TRIPLEX SOURCED FROM P05A ON CIRCUIT PRE-11 RECLOSER IS ORIENTED WITH SOURCE TERMINALS FACING POLE P05A 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW 3.4.2020 D.N.90% REVIEW Site: Grid #: Controller Company ID#: Controller Material ID#: Foreman to redline the following information kV Rating: CONTROLLER REMOVED 12kV P05 318352-166830 Site: Grid #: Controller Company ID#: Controller Material ID#: Foreman to redline the following information kV Rating: CONTROLLER INSTALLED 12kV 9999667 P05 318352-166830 MFP20002670 PRE 11 P06 318464-166801X77904X77904 DA 912 908 ABC 336.4MCMACSR318449-16680150kVA 120/240v to 318479-166802101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 9 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P06 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P06A (318449-166801) FOR REFERENCE ONLY P06 (318464-166801) EX. 45' CL 1, 2007 POLE TO REMAIN REMOVE EXISTING GANG OPERATED SWITCH, SW #X77904 2-24R x 2 -NAME IN FIELD IS INCORRECTLY LABELED CK00444 INSTALL 600A G&W VOLTAGE SENSOR IN-LINE RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWTI) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH #X77904 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P06A ON CIRCUIT PRE-11 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P06A BUILD GROUND BUS UNDER CUTOUT ARM SIMILAR TO STD 6043.1020 FIG 5 -INSTALL (2) 4" RIGID CLEVIS (INDNRC) -INSTALL "C" CONNECTORS (MID 2162700) -INSTALL #4/0 SD BARE CU JUMPERS FROM NEUTRAL TO BUS (MID 8595700) REMOVE EXISITNG POLE STUB 2-129 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P06 318464-166801 3.4.2020 D.N.90% REVIEW MFP20002670 HIG 13 P07 PRE 11 X569 DA 318626-166846 X569NO 318644-166846 318611-166846 ABC336.4MCMACSR336.4MCMACSR3233 P07A 318613-166827 37.5kVA 120/240v CBAN336.4MCMACSR ASPLUNDH TO PROVIDE VEGETATION MANAGEMENT 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 10 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P07 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P07A (318611-166846) EX. 45' CL UNK, 2011 POLE TO REMAIN FOR REFERENCE ONLY P07 (318626-166846) ASPLUDH TO PROVIDE VEGETATION MANAGEMENT EX. 45' CL UNK, 1973 POLE TO BE REPLACED REMOVE EXISTING GANG OPERATED SWITCH, SW #X569 2-24R x 2 INSTALL 50 FOOT CLASS H1 OR BETTER POLE PER STD 6010.1000 (PD50H1) 2-23 -NEW POLE TO BE PLACED IN EXISTING POLE HOLE (CUT & KICK) INST 9' 3PH DBL DE ASSY PER STD 6033.1046 (DDE3315) -ROLL NEUTRAL DOWN TO COMMON POSITION INSTALL 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH #X569 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P07A ON CIRCUIT PRE-11 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P07A TRANSFER NEUTRAL TRANSFER OH SVC COMM TO TRANSFER COMM RISER INSTALL GRID # POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P07 318626-166846 50 H1 POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P07 318626-166846 45 UNK 1973 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P07 318626-166846 3.4.2020 D.N.90% REVIEW MFP20002670 PRE 11 P08 HIG 16 NO 318320-166761X1929X1929 DA 318317-166744 318326-166782 25kVA 120/240v 100kVA 120/240v 336.4MCMA C S R 2905 2913 666 3019CBAN336.4MC M A C S R ABCN2 2 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 11 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P08 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P08A (318326-166782) FOR REFERENCE ONLY P08 (318320-166761) EX. 40' CL 1, 1980 POLE TO BE REPLACED REMOVE EXISTING GANG OPERATED SWITCH, SW#X1929 2-24R x 2 INST 50 FOOT CLASS H1 POLE PER STD 6010.1000 (PD50H1) 2-23 -INSTALL 2 INCHES (NE) AWAY FROM EXISTING POLE INSTALL THREE-PHASE DOUBLE DEADEND WINGARM FRAMING PER STD 6033.4026 (DDW313) -ROLL NEUTRAL DOWN TO COMMON POSITION INSTALL N.O. 600A G&W VOLTAGE SENSOR WINGARM RECLOSER (MID 9946808) PER STD 6023.1030 (REC15VGWW) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH# X1929 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P08A ON CIRCUIT PRE-11 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P08A REPLACE EXISTING PRI & NEU DOWN GUYS TO EXISTING ANCHOR -INST 3/8" PRI DOWN GUY PER STD 6013.0100 (GYD3SA) -INST 3/8" NEU DOWN GUY PER STD 6013.0100 (GYD3SAN) TRANSFER NEUTRAL TRANSFER OH SVC COMM TO TRANSFER INSTALL GRID # TOP EXISTING POLE 1' ABOVE COMMUNICATIONS REMOVE EXISITNG POLE AFTER ALL COMMUNICATIONS HAVE TRANSFERRED 2-129 POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P08 318320-166761 50 H1 POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P08 318320-166761 40 1 1980 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946808 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P08 318320-166761 3.4.2020 D.N.90% REVIEW MFP20002670 PRE 11 P09 PRE 12 X363 DA318128-166766X363NO 318142-16677025kVA 120/240v 318114-166767T54397.5MCMAACABC 409 2920 443 397.5MCMAACCBAP09A 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 12 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P09 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: P09A (318142-166770) FOR REFERENCE ONLY P09 (318128-166766) EX. 45' CL 2, 2007 POLE TO REMAIN REMOVE EXISTING N.O. GANG OPERATED SWITCH, SW#X363 2-24R x 2 LOWER EXISTING NEUTRAL TO 10'-7” FROM TOP OF POLE INSTALL N.O. 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH#363 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P09A ON CIRCUIT PRE-11 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P09A Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P09 318128-166766 3.4.2020 D.N.90% REVIEW MFP20002670 P10A PRE 12 P10B NE 16-23-05 (2305E061) SE 09-23-05 (2305E036) P10 37.5kVA 120/240v X1928 DA PRE 12 318112-166973T4825kVA 120/240v318113-166940T47100TX2843 318113-16692437.5kVA 120/240v 318113-166910T45 318113-166892X1928 ABCNSHUFFLETON-PRESIDENT PARK 0 318107-166948 3401 #4ACSR3401 P10C P10D 50kVA 120/240v TPX L=315'101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 13 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P10 SCALE: 1"=30' HIG-13,-16 P10A (318113-166892) EX. 45' CL UNK, 1984 POLE TO REMAIN REMOVE EXISTING GANG OPERATED SWITCH 2-24R x 2 -TRANSFER SW#X1928 TO RECLOSER ON POLE P10 PROVIDE JUMPER CONNECTION TO CONTINUE CIRCUIT -INSTALL (6) INSULATORS ON PRIMARY ARMS PER STD 6015.1000 (INDCSA) -INSTALL #4/0 JUMPER CABLES (MID 8454500) -INSTALL (6) #4/0 WEDGES (MID 2368200) P10B (318113-166910) EX. 95' CL H1, 2010 POLE TO REMAIN INSTALL 37.5KVA TRANSFORMER PER STD 6025.1000 (TRFPXF) 2-24X -TAP A PHASE P10 (318113-166924) EX. 50' CL UNK, 1965 POLE TO BE REPLACED REMOVE EXISITNG 37.5KVA TRANSFORMER 2-24R INSTALL 50 FOOT CLASS 1 OR BETTER POLE PER STD 6010.1000 (PD501) 2-23 -NEW POLE TO BE PLACED IN EXISTING POLE HOLE (CUT & KICK) INST 9' 3PH DBL DE ASSY PER STD 6033.1046 (DDE3315) INSTALL 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH #X1928 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P10B ON CIRCUIT PRE-12 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P10B TRANSFER NEUTRAL TRANSFER OH SVC COMM TO TRANSFER INSTALL GRID # P10C (318113-166940) EX.80' CL UNK, 1984 POLE TO REMAIN FOR REFERENCE ONLY P10D (318112-166973) EX.80' CL UNK, 1984 POLE TO REMAIN REMOVE EXISITNG 25KVA TRANSFORMER 2-24R INSTALL 50KVA TRANSFORMER PER STD 6025.1000 (TRFRXF) 2-24X -TAP A PHASE P10C - P10D INSTALL #1/0 OH TRIPLEX, L= 315'2-20A -SOURCED FROM P10D SPLICE TRIPLEX TO EXISTING (S) P10B - P10 REMOVE EXISTING TRIPLEX 2-20A P10- P10C REMOVE EXISTING TRIPLEX 2-20A POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P10 318113-166924 50 1 POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P10 318113-166924 50 UNK 1984 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW Removed at site: Grid Number: kVA Rating: Foreman to redline the following information TRANSFORMER REMOVAL Company ID#: Primary phase connected to: Tested Secondary Voltage P10 318133-166924 37.5kVA Installed at site: Grid Number: kVA Rating: TRANSFORMER INSTALLATION (OH) Company ID#: Primary phase connected to: Tested Secondary Voltage Material ID#: Foreman to redline the following information 37.5kVA 120/240v 6211300 P10B 318113-166910 P10 318113-166924 3.4.2020 D.N.90% REVIEW Installed at site: Grid Number: kVA Rating: TRANSFORMER INSTALLATION (OH) Company ID#: Primary phase connected to: Tested Secondary Voltage Material ID#: Foreman to redline the following information 50kVA 120/240v 6211350 P10D 318112-166973 Removed at site: Grid Number: kVA Rating: Foreman to redline the following information TRANSFORMER REMOVAL Company ID#: Primary phase connected to: Tested Secondary Voltage P10D 318112-166973 25kVA MFP20002670 P11 HIG 16 P11A X82214 DA 318495-166472 318491 166472 75kVA 120/240v25TX9235 318508-166483 ???? 318525-166475 318478-166472100TUNK BØACC924 964 318484-16646675kVA 120/240v 336.4MCMACSR336.4MCMACSR45'101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 14 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A P11 SCALE: 1"=30' HIG-13,-16 SITE SPECIFIC NOTES: P11A (318495-166472) FOR REFERENCE ONLY P11 (318491-166472) INST 45 FOOT CLASS H1 OR BETTER POLE PER STD 6010.1000 (PD45H1) 2-23 -INSTALL 45 FEET (S) AWAY FROM EXISTING POLE P11A INST 9' STD ARM 3PH TAN ASSY PER STD 6033.1012 (TAN313) INSTALL 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -ASSIGN SWITCH #X82214 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD P11A ON CIRCUIT HIG-16 ORIENT RECLOSER WITH SOURCE TERMINALS FACING POLE P11A INSTALL GRID # POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P11 318491-166472 45 H1 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P11 318491-166472 3.4.2020 D.N.90% REVIEW MFP20002670 P12 X678 DA HIG 16 318383-166442 336.4MCMACSR 336.4MCMA C S R 318377-166462 X678 318374-166481 37.5kVA 120/240v 25T UNK 678 2029 2033 700 2028 2102 2106 2105 2101 CBAB CBACBAABC318373-166448CBA336.4MCMACSR101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/20201 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 15 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A HIG-13,-16 SITE SPECIFIC NOTES: P12 (318377-166462) EX. 45' CL 4, 1959 POLE TO BE REPLACED REMOVE EXISTING GANG OPERATED SWITCH, SW#X678 2-24R x 2 INSTALL 50 FOOT CLASS H1 OR BETTER POLE PER STD 6010.1000 (PD50H1) 2-23 -INSTALL 1 FOOT (N) AWAY FROM EXISTING POLE INST 9' 3PH DBL DE ASSY PER STD 6033.1046 (DDE3315) INSTALL 600A G&W VOLTAGE SENSOR RECLOSER (MID 9946807) PER STD 6023.1020 (REC15VGWT) 2-24N x 2 -INSTALL SEL-651RA CONTROLLER (MID 9999667) -INSTALL CONTROL CABLES (MID 9996186) -INSTALL VOLTAGE SENSING CABLE (MID 9999670) -RE-ASSIGN SWITCH#X678 DA INSTALL TAP FOR RECLOSER TRANSFORMER ON THE SOURCE SIDE OF THE DEADEND -TAP STREET SIDE PHASE OF CONDUCTOR TOWARD THE WEST ON CIRCUIT HIG-16 ORIENT RECLOSER WITH SOURCE TERMINALS FACING THE WEST TRANSFER NEUTRAL TRANSFER OH SVC TRANSFER OH STREET LIGHT #SLAP1861 INSTALL GRID # POLE TABLE (NEW) Site # Pole Data Grid #Height Class Year Remarks / Location Ref. P12 318377-166462 50 H1 Site: Grid #: Recloser Company ID#: Controller Company ID#: Recloser Material ID#: Controller Material ID#: Foreman to redline the following information kV Rating: RECLOSER INSTALLED 12kV 9946807 9999667 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW P12 SCALE: 1"=20' POLE RETIREMENT TABLE TEMP TRANSFERS ST. LIGHT TRANSFERS SITE # POLE DATA POLE TEL TV FIBER TRAN RMVD ID NUMBER GRID #HEIGHT CLASS YEAR TOPPED RMVD P12 318377-166462 45 3 1959 P12 318377-166462 3.4.2020 D.N.90% REVIEW MFP20002670 HIG 13 SW1 318650-166771U1925U1925 DA 318649-166771 AØEHG000 BØEHG001 CØEHG002 AØ32128 BØ32129 CØ32130 AØACT561 BØACT562 CØACT563 AØACA997 AØACA994 BØACA995 CØACA996 AØ13982 BØ13983 CØ13984 AØACT564 BØACT565 CØACT566 1209 10' x 10' ACCESS EASEMENT V01A V01B 318649-166772 V01 AØ13982 BØ13983 CØ13984 AØEHG000 BØEHG001 CØEHG002 AØ32128 BØ32129 CØ32130 SW1 AØ13982 BØ13983 CØ13984 AØEHG000 BØEHG001 CØEHG002 AØ32128 BØ32129 CØ32130 V01A V01B V01 U1925 DA 318649-166772 318649-166771 101117857-R3UTILITIES CONTACT PHONE# COUNTY 1/4 SEC U-MAP NO (POWER) OP MAP Emer Sect Gas Wk Ctr POWER WK CTR PLAT MAP JOINT FACILITIES ARRANGEMENTS DRAWN BY CHECKED BY APPROVED BY FOREMAN #1 FOREMAN #2 MAPPING INCIDENT MAOP Gas Order Elect Order SCALE PAGE ENGR - POWER ENGR - GAS FUNCTION PROJECT MGR PERMITREAL ESTATE/EASEMENT 2 1 REV# 3 DATE DESCRIPTIONBY CONTACT PHONE NO DATE OH CKT MAP CIRCUIT NOUG CKT MAP N.COULSON 425.495.0982 D. NESKOW 206.979.6335 N/A N/A N/A D.NESKOW 206.979.6335 1/4/2021 RW 113757 RENTON/KING PRE-14 RENTON DA SWITCHES E-OH SYS. REL. Upgrades - Reclosers - Dist. RENTON, WA 98059 N/A N/A N/A 101117857 AS NOTED 16 OF 16 KING N/A N/A QCSOKE .N/A N/A ...PRE-11,-12,-14 COMCAST N/A 800-934-6489 CENTURY LINK N/A 800-778-9140 N/A N/A N/A N/A N/A N/A SW1 SCALE: 1"=20' HIG-13,-16 SITE SPECIFIC NOTES: V01 (EXISTING VAULT) SW1 (NEW) - U1925 (318650-166771) REMOVE EXISTING S&C PME-9 SWITCH REMOVE EXISTING 5x9 PME-9 LID INSTALL 5x9 54"x60" VAULT LID (MID 7656904 or 9998665 DEPENDING ON LEGACY MANUF. UTILITY VAULT or HANSON PRECAST) INSTALL NEW SCADA PADMOUNT VISTA 422 SWITCH MID 9998778 POWER NEW VISTA SWITCH WITH 120v FROM V01B RE-USE SW #U1925 & RENAME TO U1925DA ORIENT SWITCH PER DETAIL "1" V01A (EXISTING VAULT) (318649-166771) V01B - (318649-166772) INSTALL SINGLE PHASE LOOP FEED ANTI-SKID TOTAL UNDERGROUND TRANSFORMER PER STD 6045.7000 (TUT1SLA) INTERCEPT EXISTING 200A CABLE 32128-A SW1 UNDERGROUND CIRCUIT MAP (BEFORE) SCALE: N.T.S. 10.2.2019 D.N.SYSTEM PROTECTION/60% REVIEW DETAIL 2: S&C VISTA 422 PADMOUNT SWITCH (220172-167948) U406DA (PROPOSED) NOT TO SCALE 3 2 1 3 2 1 1 2 3 3 2 1 S&C TYPE PME-9 INTERNAL WORLD NOT TO SCALE PADMOUNT SWITCH U1925 (EXISTING) EHG002-C EHG001-B EHG000-A 13982-A 13983-B 13984-C ACT564-A ACT565-B ACT566-C ACT563-C ACT562-B ACT561-A SECONDARY CABLE & CONDUIT TABLE LOCATION CABLE Assumed Lot Corner CONDUIT VOLTAGE DROP VOLTAGE FLICKER ASBUILT INFORMATION SIZE LENGTH Design (ft) SIZE LENGTH Design (ft) BENDS Foreman - Complete FROM TO (1/0,4/0,350)to Meter(ft)(in)90°45°22°11°(Percent)(Percent)Actual Amount Installed (Conduit & Cable) V01B V01A 1/0 Triplex 20'2(2)10'1 V01A V01 1/0 Triplex 20'2(2)10'1 Vault & Equipment Table Site Grid Number Vault Size & Cover Type & Size Equipment In Vault Primary Bushings Transformer ID Numbers (Company ID) ASBUILT INFORMATION Foreman-Complete LB (600A)DC (200A) V01 318650 166771 EXISTING Matid:-- SW1 318650 166771 5x9 54"x60" LID Matid: 7656904/9998665 PADMOUNT VISTA 422 SWITCH Matid: 9998778 -- V01A 318649 166771 EXISTING Matid:-- V01B 318649 166772 Total UG Transformer Matid: TUT1SLA PADMOUNT VISTA 422 SWITCH Matid: 9998778 WAY 4 WAY 3 WAY 2 WAY 1 SCADACONTROLLERTERMINATION SIDE OPERATIONSIDE EHG000-AEHG001-BEHG002-C13982-A13983-B 13984-CACT564-AACT565-BACT566-C72" 15.5" 60"ACT561-AACT562-BACT563-C71" SW1 UNDERGROUND CIRCUIT MAP (AFTER) SCALE: N.T.S. 3.4.2020 D.N.90% REVIEW MFP20002670 Puget Sound Energy 355 110th Ave NE Bellevue, WA 98004 6/18/2020 City of Renton Community and Economic Development Administrator 1055 S Grady Way Renton, WA 98057 Subject: Variance to Renton Code 4-6-090 Utility Lines – Underground Installation To whom it may concern, The purpose of this letter is to apply for a variance to install a new distribution pole and overhead recloser (switch) within the city of Renton ROW. This new distribution pole and recloser will be part of an automation scheme that will increase reliability to the electric customers within the city limits by automatically switching and re-routing power during an outage. The proposed location of the new pole can be referenced on the attached construction drawings as P11 on page 14, approximately 175’ north of the intersection of Sunset Blvd NE and Aberdeen Ave NE. PSE is requesting to install a new pole and overhead switch at this location for the following reasons: • The general area of this pole provides a relative balance in circuit customer count for the distribution automation scheme. It divides the Highland’s Circuit-16 customer count into 3 equal switching zones which is optimum for an automation scheme • The proposed location of the pole provides adequate space to keep PSE’s crews safe to pull over and engage in ongoing maintenance and operation with minimal impact to transportation flows. PSE’s crews will be parking next to the pole multiple times a year and would prefer an area that is safe to work • New reclosers require their own poles to adequately function properly and be maintained. There are no existing poles between NE 12th St and NE 7th St that do not already have equipment and/or hardware on them that wouldn’t require extensive extra work to allow the scheme to function properly. Along with this request, and as mentioned during our pre-app meeting on February 19th, PSE will comply with any future requests from the city of Renton to underground this new pole and adjacent spans if a new development were to arise on the lot to the East (or for any other reason requiring the undergrounding of the pole and adjacent spans). We at Puget Sound Energy look forward to your ruling in this matter. If you have any further questions or concerns, please feel free to contact me at 425-495-0982. Respectfully, Nick Coulson, Project Manager 425-495-0982 Nick.coulson@pse.com MFP20002670