HomeMy WebLinkAboutPreload Requirements
rentonwa.gov/permitcenter | permittech@rentonwa.gov | 425-430-7215 2/13/2024 Page 1 of 2
CITY OF RENTON Ι PERMIT CENTER
SUBMITTAL REQUIREMENTS PRELOAD/
SITE PREP
MULTIFAMILY, INDUSTRIAL, AND COMMERCIAL PRELOAD/SITE PREPARATION ASSOCIATED
WITH NEW CONSTRUCTION
HOW TO APPLY
No paper documents are accepted at the City of Renton Permit Center. Your application and the required documents
must be submitted using a secure file share link provided by CED Permit staff.
When you are ready to submit your completed and signed application, email: permittech@rentonwa.gov with the fol-
lowing information:
• Application Type
• Address of Proposed Work
• Project Name
A secure file share link will be created for you to upload your application and plans/documents. Submittals will be
reviewed for completeness by Permit Staff within 5 business days of your submittal.
WHAT NEEDS TO BE SUBMITTED
1. Civil Plans– prepared by a licensed civil engineer
2. TESCP (temporary erosion and sedimentation control plan)
3. Site Plan
4. Floor Plans (include allowable area calculation)
5. Geotechnical Report—required and provisions for Special Inspection.
6. Include one copy of a Fill Source Statement certified by a professional engineer licensed in the State of Washing-
ton on appropriate City form (one copy) if:
• The property is located in Zone 1 of the Aquifer Protection Area (APA) and the volume of imported fill with
exceed 50 cubic yards; or
• The property is located in Zone 2 of the Aquifer Protection Area (APA) and the volume of imported fill will
exceed 100 cubic yards.
Refer to form entitled “Fill Source Statement” for more information. Contact the Development Services
Division to determine if your project site is located in the APA.
7. An Environmental Impact Checklist may be required - contact the Development Services Division at (425) 430-
7200 for further information.
8. A Special Inspection Authorization Form.
THE PLANS SHALL CLEARLY SHOW THE FOLLOWING (ALL ITEMS WILL BE CHECKED BEFORE ACCEPTANCE.)
Civil Plans:
• Site grading for preload, proposed and existing contours and elevations of site (to include at least 15' of adjacent
properties).
• Dimensions of all property lines and abutting streets.
rentonwa.gov/permitcenter | permittech@rentonwa.gov | 425-430-7215 2/13/2024 Page 2 of 2
SUBMITTAL REQUIREMENTS PRELOAD/SITE PREP
• Location of natural drainage systems, wetlands, or other natural features.
Site Plan:
• Scale and north arrow.
• Location, identification, and dimensions of all buildings, property lines, streets, alleys, and easements.
• The full name of the project.
• The name, address, and telephone number of owner and agent(s).
• The area, in square feet or acres, of the project site.
• The existing zoning of the project site.
• The proposed use of the building(s) - if a multi-family dwelling, indicate number of units.
• The IBC designation of occupancy group.
• The IBC type of construction of proposed building(s).
• The area of each building in square feet. Allowable area calculation.