Loading...
HomeMy WebLinkAboutC_PRE20000160_Hardy Short Plat_Meeting Summary_200620_v1PREAPPLICATION MEETING FOR Hardy Short Plat PRE 20-000160 CITY OF RENTON Department of Community & Economic Development Planning Division July 30, 2020 Contact Information: Planner: Jill Ding, 425.430.6598, jding@rentonwa.gov Public Works Plan Reviewer: Nathan Janders, 425-430-7382, njanders@rentonwa.gov Fire Prevention Reviewer: Corey Thomas, 425.276.9582, cthomas@RentonRFA.org Building Department Reviewer: Craig Burnell, 425.430.7290 Please retain this packet throughout the course of your project as a reference. Consider giving copies of it to any engineers, architects, and contractors who work on the project. You will need to submit a copy of this packet when you apply for land use and/or environmental permits. Pre-screening: When you have the project application ready for submittal, call and schedule an appointment with the project manager to have it pre-screened before formal submittal. The pre-application meeting is informal and non-binding. The comments provided on the proposal are based on the codes and policies in effect at the time of review. The applicant is cautioned that the development regulations are regularly amended and the proposal will be formally reviewed under the regulations in effect at the time of project submittal. The information contained in this summary is subject to modification and/or concurrence by official decision-makers (e.g., Hearing Examiner, Planning Director, Development Services Director, Department of Community & Economic Development Administrator, Public Works Administrator and City Council). M E M O R A N D U M DATE: July 14, 2020 TO: Jill Ding, Senior Planner FROM: Corey Thomas, Lead Plans Review Inspector SUBJECT: Hardy Short Plat 1. The fire flow requirement for a single family home is 1,000 gpm minimum for dwellings up to 3,600 square feet (including garage and basements). If the dwelling exceeds 3,600 square feet, a minimum of 1,500 gpm fire flow would be required. A minimum of one fire hydrant is required within 300-feet of the proposed buildings and two hydrants if the fire flow goes up to 1,500 gpm. There is one existing fire hydrant within 300 feet of all of the proposed new lots. Water is provided by King County Water District 90, a water availability certificate will be required. 2. The fire impact fees are currently applicable at the rate of $829.77 per single family unit. This fee is paid at building permit issuance. Credit will be granted for any existing homes that are removed or retained. 3. Fire department apparatus access roadways are required to be a minimum of 20-feet wide fully paved, with 25-feet inside and 45-feet outside turning radius. Fire access roadways shall be constructed to support a 30-ton vehicle with 75-psi point loading. Access is required within 150-feet of all points on the buildings. DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT M E M O R A N D U M DATE: July 27, 2020 TO: Jill Ding, Senior Planner FROM: Nathan Janders, Civil Plan Reviewer SUBJECT: Hardy Short Plat 857 Field Ave NE PRE 20-000160 NOTE: The applicant is cautioned that information contained in this summary is preliminary and non- binding and may be subject to modification and/or concurrence by official City decision-makers. Review comments may also need to be revised based on site planning and other design changes required by City staff or made by the applicant. I have completed a preliminary review for the above-referenced proposal located at parcel 1437650040. The following comments are based on the pre-application submittal made to the City of Renton by the applicant. WATER 1. Water service is provided by King County Water District 90. 2. Applicant shall obtain a water availability certificate from the District and provide it with the civil construction permit submittal. 3. Review of the water plans will be conducted by King County Water District 90 and the Renton Regional Fire Authority. 4. Plans approved by King County Water District 90 shall be routed to the City for final review prior to permit issuance. SEWER 1. The project is within the City of Renton’s sanitary sewer service area. 2. There is an existing 8-inch gravity wastewater main located in Field Ave NE, southeast of the site (see record drawing S-371301). 3. A minimum 8-inch sewer main extension will be required to extend from the existing 8-inch main in Field Ave NE to the northernmost property line. Sewer main extensions shall be in accordance with RMC 4-6-060. 4. Individual sewer stubs from the new sewer main and individual side sewers are required for each lot. All new sewer stubs shall conform to the standards in RMC 4-6-060 and City of Renton Standard Details. a. The side sewer for the proposed lot 2 may be extended through the shared driveway and connected directly to the sewer main in Field Ave NE. 5. The site is served by a private on-site septic system. The septic system(s) shall be abandoned in accordance with King County Department of Health regulations and Renton Municipal Code. 6. A conceptual utility plan will be required as part of the land use application for the subject development. 7. The development is subject to a wastewater system development charge (SDC) fee. SDC fee for sewer is based on the size of the new domestic water to serve the project. Current fees can be found in the 2020 Development Fees Document on the City’s website. Fees will be charged based on the rate at the time of construction permit issuance. a. SDC fee for sewer is based on the size of the new domestic water to serve the project. The current sewer fee for a 1-inch meter is $3,400.00 per meter and a 1-1/2 inch meter is $17,000.00. b. Final determination of applicable fees will be made after the water meter size has been determined. 8. The East Renton Interceptor Special Assessment District (SAD) is applicable on the project. The SAD has reached it’s maximum assessment and is $316.80 per lot. Fees are due at the time of construction permit issuance. SURFACE WATER 1. There are no existing drainage features on site. The site is generally sloped from the east to the west. 2. There is an existing public stormwater main on the west side of Field Ave NE (see record drawing R-265604). 3. Drainage plans and a drainage report complying with the adopted 2017 Renton Surface Water Design Manual will be required. Refer to Figure 1.1.2.A Flow Chart of the 2017 Renton Surface Water Design Manual (RSWDM) to determine what type of drainage review is required for this site. The site falls within the City’s Flow Control Duration Standard Matching Forested Site Conditions. The site falls within the Lower Cedar River drainage basin. 4. If the new plus replaced pollution generating impervious surface exceeds 5,000 SF, the applicant will be required to provide basic water quality treatment. Any proposed detention and/or water quality vault shall be designed in accordance with the RSWDM that is current at the time of civil construction permit application. Separate structural plans will be required to be submitted for review and approval under a separate building permit for the detention and/or water quality vault. 5. Appropriate on-site BMPs satisfying Core Requirement #9 will be required to help mitigate the new runoff created by this development to the maximum extent feasible. On-site BMPs shall be evaluated in order of preference by feasibility as described in Section C.1.3 of the 2017 RSWDM. On-site BMP facilities shall be designed according to the requirements in Section C.2 of the 2017 RSWDM. A preliminary drainage plan, including the application of on-site BMPs, shall be included with the land use application, as applicable to the project. The final drainage plan and drainage report must be submitted with the utility construction permit application. 6. A geotechnical soils report for the site is required per the 2017 Renton Surface Water Design Manual Section C.1.3. Information on the water table and soil permeability (measured infiltration rates), with recommendations of appropriate on-site BMPs per Core Requirement #9 and Appendix C shall be included in the report. The report should also include information concerning the soils, geology, drainage patterns and vegetation present shall be presented in order to evaluate the drainage, erosion control and slope stability for site development of the proposed plat. The applicant must demonstrate the development will not result in soil erosion and sedimentation, landslide, slippage, or excess surface water runoff. 7. Erosion control measures to meet the City requirements shall be provided. 8. The current Surface Water Standard Plans shall be used in all drainage plan submittals. The current City of Renton Standard Details is available online on the City of Renton website. 9. The development is subject to surface water system development charge (SDC) fees. Fees will be charged based on the rate at the time of construction permit issuance. a. The current SDC fee is $0.76 per square foot of new impervious surface but not less than $1,900. b. The current SDC fee for a single family residence is $1,900 per lot. c. The developer will receive a credit for the existing home on the lot. TRANSPORTATION 1. Per City code 4-6-060 frontage improvements are required for new construction in excess of $150,000. The proposed project fronts Field Ave NE along the east property line. Field Avenue NE is classified as a Residential Access street with an existing ROW of approximately 60-feet. Per RMC 4-6-060, the minimum right of way width for a Residential Access street is 53-feet that includes a 26-foot paved road (13 feet from centerline), a 0.5-foot curb, an 8-foot planting strip, a 5 foot sidewalk, street trees and storm drainage improvements. In order to retain the existing curbline, dedication of approximately 3 feet will be required. 2. Shared driveways are allowed for access up to 4 lots provided at least one of the four lots abuts a public right-of-way with at least fifty lenear feet of frontage and the subject lots are not created by a subdivision of ten or more lots. Refer to the shared driveway requirements as outlined in RMC 4-6-060J. Shared driveways shall be within a tract; the width of the tract and paved surface shall be a minimum of sixteen feet; the fire department may require the tract and paved surface to be up to twenty feet wide. If a shared driveway abuts properties that arenot part of the subdivision, an eight foot wide landscaped strip shall be provided between the shared driveway and neighboring properties. 3. Refer to City code 4-4-080 regarding driveway regulations. a. A minimum separation of 5 feet is required between driveway and the property line. b. Maximum driveway slopes shall not exceed 15%. Driveways exceeding 8% shall provide slotted drains. c. The maximum width of single loaded garage driveway shall not exceed nine feet (9') and double-loaded garage driveway shall not exceed sixteen feet (16'). 4. Street lighting is not required along all public street frontages for projects with less than four lots. 5. Paving and trench restoration within the City of Renton right of way shall comply with the City’s Restoration and Overlay requirements. 6. The development is subject to transportation impact fees. Fees will be charged based on the rate at the time of construction permit issuance. a. The 2020 transportation impact fee is $7,820.42 per single family home. b. The developer will receive a credit for the existing home if demoed. GENERAL COMMENTS 1. All existing and proposed utility lines (i.e. electrical, phone, and cable services, etc.) along property frontage or within the site must be underground. The construction of these franchise utilities must be inspected and approved by a City of Renton inspector. 2. Adequate separation between utilities as well as other features shall be provided in accordance with code requirements. a. 7-ft minimum horizontal and 1-ft vertical separation between storm and other utilities is required with the exception of water lines which require 10-ft horizontal and 1.5-ft vertical. b. The stormwater line should be minimum 5 feet away from any other structure or wall or building. c. Trench of any utility should not be in the zone of influence of the retaining wall or of the building. 3. All civil construction permits for utility and street improvements will require separate plan submittals. All utility plans shall confirm to the Renton Drafting Standards. A licensed Civil Engineer shall prepare the civil plans. Please visit the Development Engineering Forms page for the most up-to-date plan submittal requirements: https://rentonwa.gov/cms/One.aspx?portalId=7922741&pageId=9687014. 4. A landscaping plan shall be included with the civil plan submittal. Each plan shall be on separate sheets. 5. A demo permit is required for the demolition of the existing building(s). The demo permit shall be acquired through the building department. 6. Fees quoted in this document reflect the fees applicable in the year 2019 only and will be assessed based on the fee that is current at the time of the permit application or issuance, as applicable to the permit type. Please visit www.rentonwa.gov for the current development fee schedule. K:\Preapps\2018\PRE18000664_NE 1st St Short Plat DEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT M E M O R A N D U M DATE: July 30, 2020 TO: Pre-Application File No. 20-000160 FROM: Jill Ding, Senior Planner SUBJECT: Hardy Short Plat 857 Field Ave NE General: We have completed a preliminary review of the pre-application for the above-referenced development proposal. The following comments on development and permitting issues are based on the pre-application submittals made to the City of Renton by the applicant and the codes in effect on the date of review . The applicant is cautioned that information contained in this summary may be subject to modification and/or concurrence by official decision-makers (e.g., Hearing Examiner, Community & Economic Development Administrator, Public Works Administrator, and City Council). Review comments may also need to be revised based on site planning and other design changes required by City staff or made by the applicant. The applicant is encouraged to review all applicable sections of the Renton Municipal Code. The Development Regulations are available online at https://www.codepublishing.com/WA/Renton/. Project Proposal: The applicant is proposing to subdivide an existing parcel into two lots. The subject property is located at 857 Field Ave NE (parcel no. 1437650040) to the south of the intersection of Field Ave NE and NE 9th St. The project site totals 15,130 square feet (0.35 acres) in area and is currently developed with a single-family home, which is proposed to be retained. The site has a Comprehensive Plan Land Use of Designation of Residential Medium Density and a zoning designation of Residential-8 (R-8). The proposed lot sizes are 6,800 SF for Lot 1 and 8,330 SF for Lot 2. Access to both lots is proposed via a shared driveway off of Field Ave NE. COR maps did not indicate the presence of any critical areas on the site. Current Use: The project site is currently developed with a single-family home, which is proposed to be retained. Zoning/Density Requirements: The subject property is located within the R-8 zoning classification. The density range allowed in the R-8 zone is a minimum of 4.0 to a maximum of 8.0 dwelling units per one net acre. The Residential Medium Density Land Use designation is intended to create opportunities for new single family residential neighborhoods and to facilitate high-quality infill development that promotes reinvestment in existing single family neighborhoods. Detached single family residential dwelling units are permitted uses within the R-8 zoning designation. The area of public and private streets (including driveway tracts and private access easements) and critical areas would be deducted from the gross site area to determine the “net” site area prior to calculating density. Using the gross area of 15,131 square feet, a 2-lot proposal arrives at a gross density of 5.41 du/ac (2 lots / 0.35 acres = 5.41 du/ac), which is within the permitted density range; however, the area of the shared driveway tract and any public right-of-way dedication would need to be deducted to calculate net density. Calculations for minimum or maximum density which result in a fraction that is one-half (0.50) or greater shall be rounded up to the nearest Hardy Short Plat Page 2 of 5 July 30, 2020 whole number. Those density calculations resulting in a fraction that is less than one-half (0.50) shall be rounded down to the nearest whole number. A Density Worksheet would be required at the time of formal short plat application. The applicant would be required to demonstrate compliance with the net density requirements of the zone at the time of formal application. Development Standards: The project would be subject to RMC 4-2-110A, “Development Standards for Single Family Zoning Designations” effective at the time of complete application (noted as “R-8 standards” herein) Minimum Lot Size, Width and Depth – The minimum lot size permitted in the R-8 zone is 5,000 square feet for parcels being subdivided. Minimum lot width is 50 feet for interior lots and 60 feet for corner lots; minimum lot depth is 80 feet. Please note that for short plats of parcels smaller than one acre, one parcel may be allowed to be smaller than the required minimum lot size, if all other parcels meet the required minimum lot size standard of the zone. In the R-8 zone, one parcel may be allowed to be four thousand five hundred (4,500) square feet. As proposed, all lots appear to meet the requirements for the R-8 zone. It is the applicant’s responsibility to demonstrate compliance with the minimum lot size, width and depth criteria of the zone at the time of formal application. Building Standards – The R-8 standards allow a maximum building coverage of 50% of the lot area. The maximum impervious coverage in the R-8 zone is 65%. The maximum wall plate height is restricted to 24 feet, and the buildings shall be not more than two stories. Roofs with a pitch equal to or greater than 4:12 may project an additional six (6) vertical feet from the maximum wall plate height; common rooftop features, such as chimneys, may project an additional four (4) vertical feet from the roof surface. Non-exempt vertical projections (e.g., decks, railings, etc.) shall not extend above the maximum wall plate height unless the projection is stepped back one- and-a-half (1.5) horizontal feet from each façade for each one (1) vertical foot above the maximum wall plate height. Detached accessory structures must remain below a height of 15 feet. The gross floor area must be less than that of the primary structure. Accessory structures are also included in building lot coverage calculations. Compliance with the building standards for the existing home on proposed Lot 1 would be required to be demonstrated at the time of formal land use application. Compliance with the building standards for the new single-family residence would be required to be demonstrated at the time of building permit review. Setbacks – Setbacks are the minimum required distance between the building footprint and the property line. The required setbacks for the R-8 zone are: Front yard: 20 feet for the primary structure; Rear yard: 20 feet; Side yards: 5 feet; and Secondary Front yard: 15 feet. Corner lots required to have a front yard and a secondary front yard are relieved of the requirement to have a rear yard; in place of a rear yard setback, the side yard setback of the zone shall apply. Please note that lots with frontage on both a public street and a driveway are classified as corner lots and therefore are subject to corner lot yard standards. Compliance with the setbacks for existing structures shall be demonstrated at the time of preliminary short plat application submittal. Compliance with the setbacks for the proposed new single-family home will be verified at the time of building permit review. Access/Driveways/Parking: Access to proposed Lots 1 and 2 is proposed via a shared driveway off of Field Ave NE. Shared driveways may be allowed for access to four (4) or fewer residential lots, provided: a. At least one of the four (4) lots abuts a public right-of-way and the street frontage of the lot is equal to or greater than the lot width requirement of the zone; b. The subject lots are not created by a subdivision of ten (10) or more lots; c. A public street is not anticipated by the City of Renton to be necessary for existing or future traffic and/or pedestrian circulation through the short subdivision or to serve adjacent property; Hardy Short Plat Page 3 of 5 July 30, 2020 d. The shared driveway would not adversely affect future circulation to neighboring properties; e. The shared driveway is no more than three hundred feet (300') in length; and f. The shared driveway poses no safety risk and provides sufficient access for emergency vehicles and personnel. Shared driveways shall be within a tract; the width of the tract and paved surface shall be a minimum of sixteen feet (16'); the Fire Department may require the tract and paved surface to be up to twenty feet (20') wide. If a shared driveway abuts properties that are not part of the subdivision, an eight foot (8') wi de landscaped strip shall be provided between the shared driveway and neighboring properties. The landscape strip shall be within a tract and planted with a mixture of trees, shrubs, and groundcover. The shared driveway may be required to include a turnaround per subsection H of RMC 4-6-060. The maximum grade for the shared driveway shall not exceed fifteen percent (15%), except for within approved hillside subdivisions.The maximum driveway slopes cannot exceed 15%. If the grade exceeds 15%, a variance is required. The maximum width of single loaded garage driveways shall not exceed 9 feet and double loaded garage driveways shall not exceed 16 feet. Compliance with driveway standards would be verified at the time of building permit review. Each lot is required to accommodate off street parking for a minimum of two vehicles. Compliance with the shared driveway and access standards would be verified at the time of formal land use application. Compliance with driveway and parking standards would be verified at the time of building permit review. Fences/Walls: If the applicant intends to install any fences or retaining walls as part of this project, the location must be designated on the landscape plan or grading plan. A fence and/or wall detail should also be included on the plan. A retaining wall that is 4 feet or taller, as measured by the vertical distance from the bottom of the footing to the finish grade at the top of the wall requires a building permit. A fence shall not be constructed on top of a retaining wall unless the total combined height of the retaining wall and the fence does not exceed the allowed height of a standalone fence. For more information about fences and retaining walls refer to RMC 4-4- 040. Landscaping: With the exception of critical areas, all pervious area shall have landscape treatment. Landscaping may include hardscape such as decorative paving, rock outcroppings, fountains, plant containers, etc. Ten feet (10') of on-site landscaping is required along all public street frontages. Where there is insufficient right-of-way space or no public frontage, street trees are required in the front yard subject to approval of the Administrator. A minimum of two (2) trees are to be located in the front yard prior to final inspection. A conceptual landscape plan shall be provided with the formal land use application as prepared by a registered Landscape Architect or other certified professional. Significant Tree Retention: If significant trees are proposed to be removed, a tree inventory and a tree retention plan along with a tree retention worksheet shall be provided with the formal land use application. The tree retention plan must show preservation of at least 30 percent (30%) of significant trees, and indicate how proposed building footprints would be sited to accommodate preservation of significant trees that would be retained. The Administrator may authorize the planting of replacement trees on the site if it can be demonstrated to the Administrator's satisfaction that an insufficient number of trees can be retained. In addition to retaining 30% of existing significant trees, the lot would be required to provide a minimum tree density of 2 trees per 5,000 square feet of lot area onsite. Significant trees shall be retained in the following priority order: Hardy Short Plat Page 4 of 5 July 30, 2020 Priority One: Landmark trees; significant trees that form a continuous canopy; significant trees on slopes greater than twenty percent (20%); Significant trees adjacent to critical areas and their associated buffers; and Significant trees over sixty feet (60') in height or greater than eighteen inches (18") caliper. Priority Two: Healthy tree groupings whose associated undergrowth can be preserved; Other significant native evergreen or deciduous trees; and Other significant non- native trees. Priority Three: Alders and cottonwoods shall be retained when all other trees have been evaluated for retention and are not able to be retained, unless the alders and/ or cottonwoods are used as part of an approved enhancement project within a critical area or its buffer. The Administrator may require independent review of any land use application that involves tree removal and land clearing at the City's discretion. If staff determines that the trees cannot be retained, replacement trees, with at least a 2-inch caliper or an evergreen at least 6 feet tall, shall be planted at a rate of 12 caliper inches of new trees to replace each protected tree removed. A formal tree retention plan prepared by an arborist or landscape architect would be reviewed at the time of the formal land use application if any trees are proposed for removal. Residential Design and Open Space Standards: All single family residences would be subject to the Residential Design Standards for the R-8 zone, outlined in RMC 4-2-115. Residential Design Review occurs as part of the Building Permit Review. Critical Areas: According to COR Maps, no critical areas are mapped on the project site. It is the applicant’s responsibility to ascertain whether any additional critical areas or environmental concerns are present on the site during site development or building construction. Environmental Review: Except when located in sensitive areas (such as wetland or protected slopes) or lands covered by water, short plats of 9 or fewer residential lots are categorically exempt from Environmental (SEPA) Review. Permit Requirements: The proposal would require administrative short plat approval. The application would be reviewed within an estimated time frame of six to eight weeks. The 2020 administrative short plat application fee is $5,544.00 ($5,280.00 each plus a 5% Technology Surcharge Fee). Each modification request is $262.50 ($250.00 each plus a 5% Technology Surcharge Fee). All fees are subject to change. Detailed information regarding the land use application submittal can be found on the City’s new website by clicking “Land Use Applications” on the Community & Economic Development page, then “All Forms (A to Z).” The City now requires electronic plan submittal for all applications. Once Preliminary Short Plat approval is obtained, the applicant must complete the required improvements and dedications, as well as satisfy any conditions of the preliminary approval before submitting for Final Short Plat review. Once final approval is received, the plat may be recorded. The newly created lots may only be sold after the plat has been recorded. In addition to the required land use permits, separate construction and building permits would be required. Public Notice: A minimum of one Public Information Sign is required for a Short Plat application. The applicant is responsible for the procurement, installation and maintenance of the sign. Detailed information regarding the land use application submittal requirements is provided on the City of Renton website (www.rentonwa.gov). Fees: In addition to the applicable building and construction fees, impact fees would be required. Such fees would apply to all projects and would be calculated at the time of building permit application and payable prior to building permit issuance. The 2020 impact fees are as follows:  A Transportation Impact Fee based on $7,820.42 per each new detached dwelling unit. Hardy Short Plat Page 5 of 5 July 30, 2020  A Parks Impact Fee based on $3,945.70 per each new detached dwelling unit.  A Fire Impact fee of $829.77 per each new detached dwelling unit.  Renton School District Impact Fee is $6,862.00 per each new detached dwelling unit (plus an additional 5% service fee). A handout listing Renton’s development-related fees is available on the City of Renton website for your review. Note: When the formal application materials are complete, the applicant is strongly encouraged to have one copy of the application materials pre-screened at the 6th floor front counter prior to submitting the complete application package. Please contact Jill Ding, Senior Planner at jding@rentonwa.gov. Expiration: Upon approval, the Short Plat is valid for five years with a possible one year extension (RMC 4-7-070M). It is the responsibility of the owner to monitor the expiration date.