The URL can be used to link to this page

Home My WebLink AboutEx04_Architectural_ElevationsA7.0 Exterior Elevations Renton, WA 98057 425-271-0082 (office) 425-988-0112 (fax) www.cwdesigninc.com P.O. Box 476 Project No: Drawn By: Date: WRITTEN DIMENSIONS ON THESE DRAWINGS SHALLHAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND SITE CONDITIONS FOR THIS PROJECT, PRIOR TO THE CONSTRUCTION PHASE. IT IS THE CONTRACTORS RESPONSIBILITY TO REPORT ANY/ALL DISCREPANCIES TO THE DESIGNER AT THE TIME THEY ARE IDENTIFIED. CW DESIGN, INC MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND/OR CONDITIONS SHOWN ON THESE DRAWINGS. ANY SUCH VARIATION(S) SHALL BE RESOLVED PRIOR TO PROCEEDING WITH ANY WORK,OR THE CONTRACTOR SHALL ACCEPT FULL RESPONSIBILTY FOR COST TO RECTIFY SAME. IN THE EVENT ANY LIABILITY IS IMPOSED ON CW DESIGN, INC, OUR LIABILITY TO YOU AND/OR ANY THIRD PARTY SHALL NOT EXCEED THE FEE PAID TO CW DESIGN, INC, FOR THE DRAWINGS PRODUCED FOR THIS PROJECT. ANY UNAUTHORIZEDALTERATIONS OF THESE DRAWINGS BY THE CONTRACTOR AND/OR THIRD PARTY SHALL HOLD CW DESIGN, INC. HARMLESS FROM ANY AND ALL CLAIMS. Copyright 2019 CW Design, IncC Status: Scale: Sheet Name: No.Remarks Date - Submittal Set WJB 1 2 3 4 5 6 7 8 9 SapphireHomes-TalbotTownhomesLots13-14-15(Bldg'F')Renton,WA19041 July 16, 2021 Submittal Set 12/27/20 City Comments 04/27/21 Mod Request 07/16/21 -- -- -- -- -- -- -- 1/4"=1'-0" NORTH ELEVATION EXTERIOR ELEVATION NOTES CAULK ALL EXTERIOR JOINTS AND PENETRATIONS BUILDINGS SHALL HAVE APPROVED ADDRESS NUMBERS, BUILDING NUMBERS OR APPROVED BUILDING IDENTIFICATION PLACED IN A POSITION THAT IS PLAINLY LEGIBLE AND VISIBLE FROM THE STREET OR ROAD FRONTING THE PROPERTY. THESE NUMBERS SHALL CONTRAST WITH THEIR BACKGROUND. ADDRESS NUMBERS SHALL BE A MINIMUM OF 4 INCHES HIGH WITH A MINIMUM STROKE WIDTH OF 1/2 INCH. WHERE ACCESS IS BY MEANS OF A PRIVATE ROAD AND THE BUILDING ADDRESS CANNOT BE VIEWED FROM THE PUBLIC WAY, A MONUMENT, POLE OR OTHER SIGN OR MEANS SHALL BE USED TO IDENTIFY THE STRUCTURE (IRC SECTION R319.1) SURFACE DRAINAGE SHALL BE DIVERTED TO AN APPROVED POINT OF COLLECTION SO AS TO NOT CREATE A HAZARD. LOTS SHALL BE GRADED SO AS TO DRAIN SURFACE WATER AWAY FROM FOUNDATION WALLS. THE GRADE AWAY FROM FOUNDATION WALLS SHALL FALL A MINIMUM OF 6 INCHES WITHIN THE FIRST 10 FEET. WHERE LOT LINES, WALLS, SLOPES OR OTHER PHYSICAL BARRIERS PROHIBIT 6 INCHES OF FALL WITHIN 10 FEET, DRAINS OR SWALES SHALL BE CONSTRUCTED TO ENSURE DRAINAGE AWAY FROM THE STRUCTURE. IMPERVIOUS SURFACES WITHIN 10 FEET OF THE BUILDING FOUNDATION SHALL BE SLOPED A MINIMUM OF 2 PERCENT AWAY FROM THE BUILDING (IRC SECTION R401.3) APPROVED CORROSION-RESISTANT FLASHING SHALL BE APPLIED SHINGLE-FASHION IN SUCH A MANNER TO PREVENT ENTRY OF WATER INTO WALL CAVITY OR PENETRATION OF WATER TO THE BUILDING STRUCTURAL FRAMING COMPONENTS. THE FLASHING SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH. APPROVED CORROSION-RESISTANT FLASHINGS SHALL BE INSTALLED AT ALL OF THE FOLLOWING LOCATIONS: 1) EXTERIOR WINDOW AND DOOR OPENINGS. FLASHING AT EXTERIOR WINDOW AND DOOR OPENINGS SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH OR TO THE WATER-RESISTIVE BARRIER FOR SUBSEQUENT DRAINAGE. 2) AT THE INTERSECTION OF CHIMNEYS OR OTHER MASONRY CONSTRUCTION WITH FRAME OR STUCCO WALLS, WITH PROJECTING LIPS ON BOTH SIDES UNDER STUCCO COPINGS. 3) UNDER AND AT THE ENDS OF MASONRY, WOOD OR METAL COPINGS AND SILLS. 4) CONTINUOUSLY ABOVE ALL PROJECTING WOOD TRIM. 5) WHERE EXTERIOR PORCHES, DECKS OR STAIRS ATTACH TO A WALL OR FLOOR ASSEMBLY OF WOOD-FRAME CONSTRUCTION. 6) AT WALL AND ROOF INTERSECTIONS. 7) AT BUILT-IN GUTTERS (IRC SECTION R703.8) WEST ELEVATION EXHIBIT 4 RECEIVED Clark Close 07/16/2021 PLANNING DIVISION DocuSign Envelope ID: 573794A8-A312-4F54-AA97-AAAAB681975E A7.1 Exterior Elevations Renton, WA 98057 425-271-0082 (office) 425-988-0112 (fax) www.cwdesigninc.com P.O. Box 476 Project No: Drawn By: Date: WRITTEN DIMENSIONS ON THESE DRAWINGS SHALLHAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND SITE CONDITIONS FOR THIS PROJECT, PRIOR TO THE CONSTRUCTION PHASE. IT IS THE CONTRACTORS RESPONSIBILITY TO REPORT ANY/ALL DISCREPANCIES TO THE DESIGNER AT THE TIME THEY ARE IDENTIFIED. CW DESIGN, INC MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND/OR CONDITIONS SHOWN ON THESE DRAWINGS. ANY SUCH VARIATION(S) SHALL BE RESOLVED PRIOR TO PROCEEDING WITH ANY WORK,OR THE CONTRACTOR SHALL ACCEPT FULL RESPONSIBILTY FOR COST TO RECTIFY SAME. IN THE EVENT ANY LIABILITY IS IMPOSED ON CW DESIGN, INC, OUR LIABILITY TO YOU AND/OR ANY THIRD PARTY SHALL NOT EXCEED THE FEE PAID TO CW DESIGN, INC, FOR THE DRAWINGS PRODUCED FOR THIS PROJECT. ANY UNAUTHORIZEDALTERATIONS OF THESE DRAWINGS BY THE CONTRACTOR AND/OR THIRD PARTY SHALL HOLD CW DESIGN, INC. HARMLESS FROM ANY AND ALL CLAIMS. Copyright 2019 CW Design, IncC Status: Scale: Sheet Name: No.Remarks Date - Submittal Set WJB 1 2 3 4 5 6 7 8 9 SapphireHomes-TalbotTownhomesLots13-14-15(Bldg'F')Renton,WA19041 Apr 27, 2021 Submittal Set 12/27/20 City Comments 04/27/21 -- -- -- -- -- -- -- -- 1/4"=1'-0" SOUTH ELEVATION EXTERIOR ELEVATION NOTES CAULK ALL EXTERIOR JOINTS AND PENETRATIONS BUILDINGS SHALL HAVE APPROVED ADDRESS NUMBERS, BUILDING NUMBERS OR APPROVED BUILDING IDENTIFICATION PLACED IN A POSITION THAT IS PLAINLY LEGIBLE AND VISIBLE FROM THE STREET OR ROAD FRONTING THE PROPERTY. THESE NUMBERS SHALL CONTRAST WITH THEIR BACKGROUND. ADDRESS NUMBERS SHALL BE A MINIMUM OF 4 INCHES HIGH WITH A MINIMUM STROKE WIDTH OF 1/2 INCH. WHERE ACCESS IS BY MEANS OF A PRIVATE ROAD AND THE BUILDING ADDRESS CANNOT BE VIEWED FROM THE PUBLIC WAY, A MONUMENT, POLE OR OTHER SIGN OR MEANS SHALL BE USED TO IDENTIFY THE STRUCTURE (IRC SECTION R319.1) SURFACE DRAINAGE SHALL BE DIVERTED TO AN APPROVED POINT OF COLLECTION SO AS TO NOT CREATE A HAZARD. LOTS SHALL BE GRADED SO AS TO DRAIN SURFACE WATER AWAY FROM FOUNDATION WALLS. THE GRADE AWAY FROM FOUNDATION WALLS SHALL FALL A MINIMUM OF 6 INCHES WITHIN THE FIRST 10 FEET. WHERE LOT LINES, WALLS, SLOPES OR OTHER PHYSICAL BARRIERS PROHIBIT 6 INCHES OF FALL WITHIN 10 FEET, DRAINS OR SWALES SHALL BE CONSTRUCTED TO ENSURE DRAINAGE AWAY FROM THE STRUCTURE. IMPERVIOUS SURFACES WITHIN 10 FEET OF THE BUILDING FOUNDATION SHALL BE SLOPED A MINIMUM OF 2 PERCENT AWAY FROM THE BUILDING (IRC SECTION R401.3) APPROVED CORROSION-RESISTANT FLASHING SHALL BE APPLIED SHINGLE-FASHION IN SUCH A MANNER TO PREVENT ENTRY OF WATER INTO WALL CAVITY OR PENETRATION OF WATER TO THE BUILDING STRUCTURAL FRAMING COMPONENTS. THE FLASHING SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH. APPROVED CORROSION-RESISTANT FLASHINGS SHALL BE INSTALLED AT ALL OF THE FOLLOWING LOCATIONS: 1) EXTERIOR WINDOW AND DOOR OPENINGS. FLASHING AT EXTERIOR WINDOW AND DOOR OPENINGS SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH OR TO THE WATER-RESISTIVE BARRIER FOR SUBSEQUENT DRAINAGE. 2) AT THE INTERSECTION OF CHIMNEYS OR OTHER MASONRY CONSTRUCTION WITH FRAME OR STUCCO WALLS, WITH PROJECTING LIPS ON BOTH SIDES UNDER STUCCO COPINGS. 3) UNDER AND AT THE ENDS OF MASONRY, WOOD OR METAL COPINGS AND SILLS. 4) CONTINUOUSLY ABOVE ALL PROJECTING WOOD TRIM. 5) WHERE EXTERIOR PORCHES, DECKS OR STAIRS ATTACH TO A WALL OR FLOOR ASSEMBLY OF WOOD-FRAME CONSTRUCTION. 6) AT WALL AND ROOF INTERSECTIONS. 7) AT BUILT-IN GUTTERS (IRC SECTION R703.8) EAST ELEVATION DocuSign Envelope ID: 573794A8-A312-4F54-AA97-AAAAB681975E A7.0 Exterior Elevations Renton, WA 98057 425-271-0082 (office) 425-988-0112 (fax) www.cwdesigninc.com P.O. Box 476 Project No: Drawn By: Date: WRITTEN DIMENSIONS ON THESE DRAWINGS SHALLHAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND SITE CONDITIONS FOR THIS PROJECT, PRIOR TO THE CONSTRUCTION PHASE. IT IS THE CONTRACTORS RESPONSIBILITY TO REPORT ANY/ALL DISCREPANCIES TO THE DESIGNER AT THE TIME THEY ARE IDENTIFIED. CW DESIGN, INC MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND/OR CONDITIONS SHOWN ON THESE DRAWINGS. ANY SUCH VARIATION(S) SHALL BE RESOLVED PRIOR TO PROCEEDING WITH ANY WORK,OR THE CONTRACTOR SHALL ACCEPT FULL RESPONSIBILTY FOR COST TO RECTIFY SAME. IN THE EVENT ANY LIABILITY IS IMPOSED ON CW DESIGN, INC, OUR LIABILITY TO YOU AND/OR ANY THIRD PARTY SHALL NOT EXCEED THE FEE PAID TO CW DESIGN, INC, FOR THE DRAWINGS PRODUCED FOR THIS PROJECT. ANY UNAUTHORIZEDALTERATIONS OF THESE DRAWINGS BY THE CONTRACTOR AND/OR THIRD PARTY SHALL HOLD CW DESIGN, INC. HARMLESS FROM ANY AND ALL CLAIMS. Copyright 2019 CW Design, IncC Status: Scale: Sheet Name: No.Remarks Date - Submittal Set WJB 1 2 3 4 5 6 7 8 9 SapphireHomes-TalbotTownhomesLots16-17-18(Bldg'G')Renton,WA19042 Apr 20, 2021 Submittal Set 12/27/20 City Comments 04/20/21 -- -- -- -- -- -- -- -- 1/4"=1'-0" SOUTH ELEVATION EXTERIOR ELEVATION NOTES CAULK ALL EXTERIOR JOINTS AND PENETRATIONS BUILDINGS SHALL HAVE APPROVED ADDRESS NUMBERS, BUILDING NUMBERS OR APPROVED BUILDING IDENTIFICATION PLACED IN A POSITION THAT IS PLAINLY LEGIBLE AND VISIBLE FROM THE STREET OR ROAD FRONTING THE PROPERTY. THESE NUMBERS SHALL CONTRAST WITH THEIR BACKGROUND. ADDRESS NUMBERS SHALL BE A MINIMUM OF 4 INCHES HIGH WITH A MINIMUM STROKE WIDTH OF 1/2 INCH. WHERE ACCESS IS BY MEANS OF A PRIVATE ROAD AND THE BUILDING ADDRESS CANNOT BE VIEWED FROM THE PUBLIC WAY, A MONUMENT, POLE OR OTHER SIGN OR MEANS SHALL BE USED TO IDENTIFY THE STRUCTURE (IRC SECTION R319.1) SURFACE DRAINAGE SHALL BE DIVERTED TO AN APPROVED POINT OF COLLECTION SO AS TO NOT CREATE A HAZARD. LOTS SHALL BE GRADED SO AS TO DRAIN SURFACE WATER AWAY FROM FOUNDATION WALLS. THE GRADE AWAY FROM FOUNDATION WALLS SHALL FALL A MINIMUM OF 6 INCHES WITHIN THE FIRST 10 FEET. WHERE LOT LINES, WALLS, SLOPES OR OTHER PHYSICAL BARRIERS PROHIBIT 6 INCHES OF FALL WITHIN 10 FEET, DRAINS OR SWALES SHALL BE CONSTRUCTED TO ENSURE DRAINAGE AWAY FROM THE STRUCTURE. IMPERVIOUS SURFACES WITHIN 10 FEET OF THE BUILDING FOUNDATION SHALL BE SLOPED A MINIMUM OF 2 PERCENT AWAY FROM THE BUILDING (IRC SECTION R401.3) APPROVED CORROSION-RESISTANT FLASHING SHALL BE APPLIED SHINGLE-FASHION IN SUCH A MANNER TO PREVENT ENTRY OF WATER INTO WALL CAVITY OR PENETRATION OF WATER TO THE BUILDING STRUCTURAL FRAMING COMPONENTS. THE FLASHING SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH. APPROVED CORROSION-RESISTANT FLASHINGS SHALL BE INSTALLED AT ALL OF THE FOLLOWING LOCATIONS: 1) EXTERIOR WINDOW AND DOOR OPENINGS. FLASHING AT EXTERIOR WINDOW AND DOOR OPENINGS SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH OR TO THE WATER-RESISTIVE BARRIER FOR SUBSEQUENT DRAINAGE. 2) AT THE INTERSECTION OF CHIMNEYS OR OTHER MASONRY CONSTRUCTION WITH FRAME OR STUCCO WALLS, WITH PROJECTING LIPS ON BOTH SIDES UNDER STUCCO COPINGS. 3) UNDER AND AT THE ENDS OF MASONRY, WOOD OR METAL COPINGS AND SILLS. 4) CONTINUOUSLY ABOVE ALL PROJECTING WOOD TRIM. 5) WHERE EXTERIOR PORCHES, DECKS OR STAIRS ATTACH TO A WALL OR FLOOR ASSEMBLY OF WOOD-FRAME CONSTRUCTION. 6) AT WALL AND ROOF INTERSECTIONS. 7) AT BUILT-IN GUTTERS (IRC SECTION R703.8) WEST ELEVATION DocuSign Envelope ID: 573794A8-A312-4F54-AA97-AAAAB681975E A7.1 Exterior Elevations Renton, WA 98057 425-271-0082 (office) 425-988-0112 (fax) www.cwdesigninc.com P.O. Box 476 Project No: Drawn By: Date: WRITTEN DIMENSIONS ON THESE DRAWINGS SHALLHAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTOR SHALL VERIFY ALL DIMENSIONS AND SITE CONDITIONS FOR THIS PROJECT, PRIOR TO THE CONSTRUCTION PHASE. IT IS THE CONTRACTORS RESPONSIBILITY TO REPORT ANY/ALL DISCREPANCIES TO THE DESIGNER AT THE TIME THEY ARE IDENTIFIED. CW DESIGN, INC MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND/OR CONDITIONS SHOWN ON THESE DRAWINGS. ANY SUCH VARIATION(S) SHALL BE RESOLVED PRIOR TO PROCEEDING WITH ANY WORK,OR THE CONTRACTOR SHALL ACCEPT FULL RESPONSIBILTY FOR COST TO RECTIFY SAME. IN THE EVENT ANY LIABILITY IS IMPOSED ON CW DESIGN, INC, OUR LIABILITY TO YOU AND/OR ANY THIRD PARTY SHALL NOT EXCEED THE FEE PAID TO CW DESIGN, INC, FOR THE DRAWINGS PRODUCED FOR THIS PROJECT. ANY UNAUTHORIZEDALTERATIONS OF THESE DRAWINGS BY THE CONTRACTOR AND/OR THIRD PARTY SHALL HOLD CW DESIGN, INC. HARMLESS FROM ANY AND ALL CLAIMS. Copyright 2019 CW Design, IncC Status: Scale: Sheet Name: No.Remarks Date - Submittal Set WJB 1 2 3 4 5 6 7 8 9 SapphireHomes-TalbotTownhomesLots16-17-18(Bldg'G')Renton,WA19042 Apr 20, 2021 Submittal Set 12/27/20 City Comments 04/20/21 -- -- -- -- -- -- -- -- 1/4"=1'-0" NORTH ELEVATION EXTERIOR ELEVATION NOTES CAULK ALL EXTERIOR JOINTS AND PENETRATIONS BUILDINGS SHALL HAVE APPROVED ADDRESS NUMBERS, BUILDING NUMBERS OR APPROVED BUILDING IDENTIFICATION PLACED IN A POSITION THAT IS PLAINLY LEGIBLE AND VISIBLE FROM THE STREET OR ROAD FRONTING THE PROPERTY. THESE NUMBERS SHALL CONTRAST WITH THEIR BACKGROUND. ADDRESS NUMBERS SHALL BE A MINIMUM OF 4 INCHES HIGH WITH A MINIMUM STROKE WIDTH OF 1/2 INCH. WHERE ACCESS IS BY MEANS OF A PRIVATE ROAD AND THE BUILDING ADDRESS CANNOT BE VIEWED FROM THE PUBLIC WAY, A MONUMENT, POLE OR OTHER SIGN OR MEANS SHALL BE USED TO IDENTIFY THE STRUCTURE (IRC SECTION R319.1) SURFACE DRAINAGE SHALL BE DIVERTED TO AN APPROVED POINT OF COLLECTION SO AS TO NOT CREATE A HAZARD. LOTS SHALL BE GRADED SO AS TO DRAIN SURFACE WATER AWAY FROM FOUNDATION WALLS. THE GRADE AWAY FROM FOUNDATION WALLS SHALL FALL A MINIMUM OF 6 INCHES WITHIN THE FIRST 10 FEET. WHERE LOT LINES, WALLS, SLOPES OR OTHER PHYSICAL BARRIERS PROHIBIT 6 INCHES OF FALL WITHIN 10 FEET, DRAINS OR SWALES SHALL BE CONSTRUCTED TO ENSURE DRAINAGE AWAY FROM THE STRUCTURE. IMPERVIOUS SURFACES WITHIN 10 FEET OF THE BUILDING FOUNDATION SHALL BE SLOPED A MINIMUM OF 2 PERCENT AWAY FROM THE BUILDING (IRC SECTION R401.3) APPROVED CORROSION-RESISTANT FLASHING SHALL BE APPLIED SHINGLE-FASHION IN SUCH A MANNER TO PREVENT ENTRY OF WATER INTO WALL CAVITY OR PENETRATION OF WATER TO THE BUILDING STRUCTURAL FRAMING COMPONENTS. THE FLASHING SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH. APPROVED CORROSION-RESISTANT FLASHINGS SHALL BE INSTALLED AT ALL OF THE FOLLOWING LOCATIONS: 1) EXTERIOR WINDOW AND DOOR OPENINGS. FLASHING AT EXTERIOR WINDOW AND DOOR OPENINGS SHALL EXTEND TO THE SURFACE OF THE EXTERIOR WALL FINISH OR TO THE WATER-RESISTIVE BARRIER FOR SUBSEQUENT DRAINAGE. 2) AT THE INTERSECTION OF CHIMNEYS OR OTHER MASONRY CONSTRUCTION WITH FRAME OR STUCCO WALLS, WITH PROJECTING LIPS ON BOTH SIDES UNDER STUCCO COPINGS. 3) UNDER AND AT THE ENDS OF MASONRY, WOOD OR METAL COPINGS AND SILLS. 4) CONTINUOUSLY ABOVE ALL PROJECTING WOOD TRIM. 5) WHERE EXTERIOR PORCHES, DECKS OR STAIRS ATTACH TO A WALL OR FLOOR ASSEMBLY OF WOOD-FRAME CONSTRUCTION. 6) AT WALL AND ROOF INTERSECTIONS. 7) AT BUILT-IN GUTTERS (IRC SECTION R703.8) EAST ELEVATION DocuSign Envelope ID: 573794A8-A312-4F54-AA97-AAAAB681975E