HomeMy WebLinkAbout320.3CAUTION VALVE BOX SHOULD NOT REST ON
PIPE. LATER COMPACTION IN AREA OF VALVE BOX
COULD CAUSE THE BREAKAGE OF THE SERVICE.
9" MIN.
12" MAX.
O
NO U
n
CRUSHED ROCK BASE
TO SUPPORT VAULT.
1-1/2" AND 2" WATER SERVICE DETAIL
MATERIAL LIST FOR 2" SERVICE WITH METER LOCATED IN RIGHT—OF—WAY BEHIND SIDEWALK
FRIM
PRIVATE PLUMBING
SHALL CONNECT
HERE
2" BRASS PLUG
(THREADED)
BY PASS NOT ALLOWED
FOR IRRIGATION METERS
VMrIPTx QUICK JOINT
1. 2" tapped tee on new water meter.
2. 4" long X 2" brass nipple with threaded ends (MIPT). A — A
3. 2" resilient seat valve with threaded ends, square operating nut and valve nut extension if DRILL 2" DIA. HOLE FOR
required (see standard detail 330.1). TOUCHREAD DEVICE
4. Two piece cast iron valve box. Standard 8" top section with regular base section, length to
fit, "lug" type cover.
5. 2" brass bushing (MIPT x FIPT) 2 each 2" brass or bronze nipples 6" length, threaded ends 2
each 2"-90° brass or bronze elbows (FIPT x FIPT)
6. 2" (MIPT) x compression fitting, Ford C84-66 or equal.
7. 2" soft copper type K or brass nipples, length to fit.
8. 2" threaded brass 90' ell.
9. 2" Customsetter with by—pass Ford VBH 86-128-11-77 (17-3/16") or McDonald brass
3OB715WDFF775, with flanged angle ball valve and padlock wings on inlet, and angle check valve
outlet, ball valve on bypass with padlock wings. Customsetter shall have vertical inlet and outlet.
10. Rigid meter spreader to be supplied and installed in meter setter by contractor.
11. Water meter shall be supplied and installed by City of Renton upon payment of all related water
meter fee and satisfactory pressure and purity tests.
12. 17"x30" equal to Mid—States Plastics, Inc. BCF Series MSBCF 1730-18 with 2" thick Ductile iron
damond plate cover 18"x31" equal to Mid—States Plastics, Inc. MSCBC-1730—R with 2" drilled hole
for touchread pit lid, and meter read lid.
13. 2" coupling (compression x FIPT) with 2" plug (MIPT), Ford C-14-66 or equal. The property
owner is responsible for any necessary adaptation or extension of water service.
MATERIAL LIST FOR 1-1/2" SERVICE WITH METER LOCATED IN RIGHT—Of—WAY BEHIND SIDEWALK
1. 2" tapped tee on new water main
2. 4" long X 2" brass nipple with threaded ends (MIPT).
3. 2" resilient seat valve with threaded ends, square operating nut and valve nut extension if required
(see standard detail 330.1).
4. Two piece cast iron valve box. Standard 8" top section with regular base section, length to fit,
"lug" type cover.
5. 2" X 1-1/2" hex brass bushing (MIPT x FIPT), 2 each 1-1/2" brass or bronze nipples 6" length
(threaded ends), 2 each 1-1/2"— 90' brass or bronze elbows (FIPT x FIPT)
6. 1-1/2" (MIPT) x compression fitting, Ford C84-66 or equal.
7. 1-1/2" soft copper type K or brass nipples, length to fit.
B. 1-1/2" pack—joint 90° ell, for Ford L44-77 or equal.
9. 1-1/2" Customsetter with by—pass Ford VBH 66-12B x 13-3/16" or McDonald brass, with flanged
angle ball valve and padlock wings on inlet, and angle check valve outlet, ball valve on bypass with
padlock wings. Customsetter shall have vertical inlet and outlet.
10. Rigid meter spreader to be supplied and installed in meter setter by contractor.
11. Water meter shall be supplied and installed by City of Renton upon payment of all related water
meter fee and satisfactory pressure and purity tests.
12. 17"x30" equal to Mid—States Plastics, Inc. BCF Series MSBCF 1730-18 with 2" thick Ductile iron
damond plate cover 18"x31" equal to Mid—States Plastics, Inc. MSCBC-1730—R with 2" drilled hole
for touchread pit lid and meter read lid.
13. 1-1/2" coupling (compression x FIPT) with 1-1/2" plug (MIPT), Ford C-14-66 or equal. The
property owner is responsible for any necessary adaptation or extension of water service.
NOTE:
ALL METER BOXES INSTALLED IN CONCRETE OR PAVED
DRIVEWAYS SHALL BE CAST—IRON EQUAL TO OLYMPIC
FOUNDARY.
EXPANSION JOINTS MUST BE INSTALLED 12" MINIMUM ON BOTH
SIDES OF METER BOX.
TYPICAL RIB
2-1/2" MIN. FROM NEAREST
AND FRONT EDGE OF PIT LID
ZY
+ e� �+ PUBLIC WORKS 2 AND 1 12" WATER SERVICE LOCATED STD. PLAN — 320.3
�O DEPARTMENT IN RIGHT OF WAY BEHIND SIDEWALK
�N,yp FEBRUARY 2010