HomeMy WebLinkAboutFS-1.110'-0" MAX.
END OR CORNER (BRACE) POST
TENSION WIRE PULL POST
TENSION WIRE
HOG RINGS (TYP.) -
SPACED @ 24" (IN) MAX.
10'-0" MAX.
END OR CORNER (BRACE) POST
TENSION WIRE
CONCRETE POST
BASE (TYP.)
PULL POST
POST AND RAIL SPECIFICATIONS
PIPE ROLL FORMED
POST NOM. SIZE
(SCH. 40) SECTION WEIGHT
I.D. (lb/ft)
END, CORNER, OR PULL POST 2 1/2" DIAM. 8 5.10
LINE OR BRACE POST 2" DIAM. 0 1.85
FILE NAME S:\Desi n R P& S\4-Standards\2-Pian Sheet Libra
TIME 8:34:47 AM
DATE 511312015
PLOTTED BY FletcCo
DESIGNED BY
ENTERED BY
CHECKED BY
PROJ.ENGR.
REGIONAL ADM. REVISION
TENSION WIRE
LINE POST -SPACED
@ 10'(Fn MAX.
TENSION WIRE
1 000'-0" MAX.
TYPE 3
500'-0" MAX.
10'-0" MAX. (TYP.)
KNUCKLED
(TYP.)
SELVAGE
10'-0" MAX. (TYP.)
LINE POST -SPACED
10' (FT) MAX.
FABRIC LOOP -
2 SIDES
I-I (!)
• iii OI
-' (.)
"""o:: III ~
DATE
3 1/2"
BY
TYPE 4
CONTRACT NO.
n [C
FENCE LINE
LOCATION NO.
KNUCKLED
(TYP.)
P.E. STAMP BOX
DATE
PULL POST -SPACED
@ 1000' <Fn MAX.
HOG RINGS (TYP.) -
SPACED @ 24" (IN) MAX.
NOTES
1. ALL CONCRETE POST BASES SHALL BE 10" (IN)
MINIMUM DIAMETER.
TENSION WIRE
2. ALONG THE TOP AND BOTTOM, USING HOG
RINGS, FASTEN THE CHAIN LINK FENCE FABRIC
TO THE TENSION WIRE WITHIN THE LIMITS
CHAIN LINK
FENCE FABRIC
CONCRETE POST
BASE (TYP.)
OF THE FIRST FULL FABRIC WEAVE.
3. DETAILS ARE ILLUSTRATIVE AND SHALL NOT
LIMIT HARDWARE DESIGN OR POST
SELECTION OF ANY PARTICULAR TYPE.
TIE WIRES (TYP.) -
SPACED @ 14" (IN) MAX.
HOG RINGS (TYP.) -
SPACED @ 24" (IN) MAX.
TENSION BAND -
SPACED 15" (IN) MAX.
TENSION
BAR
TENSION WIRE BRACE POST
DATE
P.E. STAMP BOX
CHAIN LINK
FENCE FABRIC
Washington State
METHOD OF FASTENING
STRETCHER BAR TO POST
Department of Transportation t---------------------1
CHAIN LINK FENCE WITH EYE BOLTS
Plot 1
PLAN REF NO
FS-1.1
SHEET
1
OF
2
SHEETS
FILE NAME
TIME
DATE
PLOTTED BY
DESIGNED BY
ENTERED BY
CHECKED BY
PROJ.ENGR.
REGIONAL ADM.
EYE BOLT
TENSION BAND
END OR CORNER (BRACE) POST
DETAIL 0
TENSION WIRE
TIE WIRE -SPACED
@ 14" (IN) MAX. (TYP.)
HOG RING -SPACED
@ 24" (IN) MAX.
' :v
BRACE POST
DETAIL 0
S:\Desi n R P& S\4-Standards\2-Pian Sheet Libra
8:35:00 AM
511312015
FletcCo
REVISION DATE
TENSION WIRE
TENSION WIRE
TURNBUCKLE
EYE BOLT
CONTRACT NO.
BY
EYE NUT
TENSION BAND (TYP.)
EYE NUT
TENSION BAND (TYP.)
LOCATION NO.
DATE
P.E. STAMP BOX
BOLT
TURNBUCKLE
TENSION BAR (TYP.)
PULL POST (AT END OR CORNER)
DETAIL 0
PULL POST (WITHIN RUN)
DETAIL 0
TURNBUCKLE
TENSION BAR (TYP.)
Washington State
Department of Transportation
DATE
P.E. STAMP BOX
TENSION WIRE
Plot2
PLAN REF NO
FS-1.1
SHEET
2
OF
CHAIN LINK FENCE WITH EYE BOLTS 2
SHEETS