HomeMy WebLinkAboutEx_07_PSCAA_Notice_of_ConstructionNotice of Construction (NOC)
Worksheet
Applicant: Aero-Plastics, Inc.
Project Location: 833 Houser Way North, Renton WA 98057
Applicant Name and Phone: Mike Brown, (425) 770-3309
NAICS: 326199, 336413
A. DESCRIPTION
For the Order of Approval: This is for new construction of spray booth operation in existing building.
Operation will be used for the spray coating of plastic products currently produced by the company. The
following equipment will be installed to minimize air emissions.
A: Qty 1-Global Finishing Solutions environmentally controlled enclosure Model # ENCG-381148-NDT-
FRFRFR-OHT-SP ENLCOSURE, 38'Wx11'Hx48'L, with electric direct fired air make up unit controlling
temperature and humidity providing 13,600 cubic feet per minute of makeup air. To replace the
discharged air from below listed item B open faced spray booths. No VOC emissions. See manufacturing
drawing page 22 of 25.
B: Located within above enclosure, Qty 2-Global Finishing Solutions open face spray booths Model #
DFOCG-080808-NSB-2L-SP, each with an exhaust flow rate of 6,400 cubic feet per minute from one
exhaust stack each and an estimated enclosure volume of 512 cubic feet each. See open face booth 1 and
2-NOC application supplemental forms and engineering drawing page 5 of 25.
C: Qty 1-Global Finishing Solutions fully enclosed semi down draft spray booth and drying enclosure
Model # LESMG-120820-PSB-FR-IHD-CUF-SP SEMI-DOWNDRAFT, with an exhaust flow rate of 9,600 cubic
feet per minute from one exhaust stack and an estimated enclosure volume of 1,824 cubic feet. Semi
down draft booth is self contained with dedicated natural gas direct fired air make up unit providing 9,600
cubic feet per minute of makeup air. See semi downdraft spray booth-NOC application supplemental
form and engineering drawing page 5 of 25.
D: Qty 1 Global Finishing Solutions paint mixing room Model # IMRG-151008-N-SP with exhaust flow of
949 cubic feet per minute, and estimated volume of 1,200 cubic feet per minute. No VOC emission. See
manufacturing drawing page 7 of 25.
E. Qty 2 Global Finishing Solutions Model # BLOTG-110812-PSB-FR-SP low temp batch ovens with
estimated volume of 966 cubic feet each and 500 cubic feet per minute from one exhaust stack each. Used
to accelerate evaporation only. No VOC emission. See manufacturing drawing page 18 of 25.
Exhibit 7
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
2
Facility:
Above described equipment will be installed within the existing structure located at 833 Houser
Way North Renton, WA 98057.
Legal Description of Property: COMM AT SW COR OF NE 1/4 TH S 89-28-19 E 391.9 FT TO WLY LN
OF HOUSER WAY N TH N 18-01-34 W 967.58 FT TO TPOB TH CONTG N 18-01-34 W 268 FT TH S
71-58-26 W 233.5 FT TH S 18-01-34 E 268 FT TH N 71-58-26 E 233.5 FT TO TPOB
The facility will operate 16 hours/day, 5 days/week, 50 weeks per year for a total of 4,000 hours
per year. The estimated installation date is November 1, 2022.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
3
-Equipment will be used for the spray coating of primers and enamels to aerospace and other
industry manufactured parts/components.
-HVLP spray gun systems will be used to apply all coatings. Manual cleaning operations will be
used to clean spray guns and other accessory equipment within enclosed space of mixing
room (Pg. 1, Item D)
-Used solvents and cleaning agents will be captured and stored in closed containers and
disposed of through Safety Clean or similar company.
-The estimated total usage of primers, topcoats, catalyst/curing solution, reducers/thinners,
enamels, and other VOC containing material is 750 gallons per year.
Individual estimated usage for each known VOC can be found table I: Usage and Emission
Estimates, and in SDS and Product Information for materials to be used.
Materials:
ANNUAL ESTIMATED USAGE FOR HAP-VOC EMMISSIONS:
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
4
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Puget Sound Clean Air Agency
1904 Third Avenue, Suite 105 | Seattle, WA 98101-3317
Phone 206-343-8800 | 206-343-7522 Fax
Form No. 50-150 | CJC | 02/18 Page 1 of 18
ENVIRONMENTAL CHECKLIST
Because of the State Environmental Policy Act, the action for which you are filing a Notice of Construction and
Application for Approval to this Agency requires the completion of an environmental checklist.
BUT: If you can answer “yes” to either of the following statements with respect to the action being proposed, the
attached checklist need not be completed:
1.I have obtained a State, City, or County Permit and filled out an environmental checklist.
Yes No
If yes, complete the following:
State, City or County Department: _____________________________________________
Date the checklist was completed: _____________________________________________
Attach a copy of the checklist
2.An environmental checklist or assessment has previously been filled out for another agency.
Yes No
If yes, complete the following:
Agency: ________________________________________________________________
Date the checklist was completed: __________________________________________
Attach a copy of the checklist
If your answers are NO to both of the above statements, you must complete the attached environmental
checklist.
Prepared by:
Signature ________________________________________________________________
Name ________________________________________________________________
Position ________________________________________________________________
Agency/Organization ________________________________________________________________
Date Submitted ________________________________________________________________
Mike Brown
CEO
Aero-Plastics, Inc.
10/11/21
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 2 of 18
Date: ___________________________________________
Proponent: Puget Sound Clean Air Agency__________________
Project, Brief Title: ___________________________________________
Purpose of Checklist: Governmental agencies use this checklist to help determine whether the environmental impacts of your proposal
are significant. This information is also helpful to determine if available avoidance, minimization or compensatory
mitigation measures will address the probable significant impacts or if an environmental impact statement will be
prepared to further analyze the proposal.
Instructions for Applicants: This environmental checklist asks you to describe some basic information about your proposal. Please answer
each question accurately and carefully, to the best of your knowledge. You may need to consult with an
agency specialist or private consultant for some questions. You may use “not applicable” or "does not apply"
only when you can explain why it does not apply and not when the answer is unknown. You may also attach or
incorporate by reference additional studies reports. Complete and accurate answers to these questions often
avoid delays with the SEPA process as well as later in the decision-making process.
The checklist questions apply to all parts of your proposal, even if you plan to do them over a period of time or
on different parcels of land. Attach any additional information that will help describe your proposal or its
environmental effects. The agency to which you submit this checklist may ask you to explain your answers or
provide additional information reasonably related to determining if there may be significant adverse impact.
Instructions for Lead Agencies: Please adjust the format of this template as needed. Additional information may be necessary to evaluate the
existing environment, all interrelated aspects of the proposal and an analysis of adverse impacts. The checklist is
considered the first but not necessarily the only source of information needed to make an adequate threshold
determination. Once a threshold determination is made, the lead agency is responsible for the completeness and
accuracy of the checklist and other supporting documents.
Use of Checklist for Nonproject Proposals: For nonproject proposals (such as ordinances, regulations, plans and programs), complete the applicable parts of
Sections A, B, and C plus section D: Supplemental Sheet for Nonproject Actions.
Please completely answer all questions that apply and note that the words "project," "applicant," and "property
or site" should be read as "proposal," "proponent," and "affected geographic area," respectively. The lead agency
may exclude (for non-projects) questions in Section B: Environmental Elements that do not contribute
meaningfully to the analysis of the proposal.
10/11/21
Paint Booth Installation
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 3 of 18
A. BACKGROUND
1.Name of proposed project, if applicable:
2.Name of Applicant
3.Applicant Address City State Zip
Applicant Phone Applicant Email
Contact Person Title
Company/Firm
4.Date Checklist Prepared 5.Agency Requesting Checklist
6.Proposed timing or schedule (including phasing, if applicable).
7.Do you have any plans for future additions, expansion, or further activity related to or connected with this
proposal? Yes No. If yes, explain.
8.List any environmental information you know about that has been prepared, or will be prepared, directly
related to this proposal.
9.Do you know whether applications are pending for governmental approvals of other proposals directly
affecting the property covered by your proposal? Yes No. If yes, explain.
10.List any government approvals or permits that will be needed for your proposal, if known.
Paint booth installation
Aero-Plastics, Inc.
903 Houser Way North Renton WA 98057
425-770-3309 mikeb@aero-plastics.com
Mike Brown CEO
Aero-Plastics, Inc.
10/11/21 PSCAA
To be started and completed in 2022.
PSCAA
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 4 of 18
12
11.
Paint operation consisting of one fully enclosed spray booth, two open face spray booths , two drying/curing
enclosures, one self contained prep booth and one self contained paint mixing room. fully enclosed spray
booth has dedicated air make up and heating unit, two open faced spray booths to be located in one enclosed
space which is environmentally controlled for temperature and humidity by one dedicated air make up unit.
The proposed project will take place at 833 Houser Way North, Renton WA, 98057
COMM AT SW COR OF NE 1/4 TH S 89-28-19 E 391.9 FT TO WLY LN OF HOUSER WAY N TH N
18-01-34 W 967.58 FT TO TPOB TH CONTG N 18-01-34 W 268 FT TH S 71-58-26 W 233.5 FT TH S
18-01-34 E 268 FT TH N 71-58-26 E 233.5 FT TO TPOB
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 5 of 18
B.ENVIRONMENTAL ELEMENTS
1.EARTH
a.General description of the site:
flat rolling hilly steep slopes mountains
other _______________________________________________
b.What is the steepest slope on the site (approximate percent slope)?
c.What general types of soils are found on the site (for example, clay, sand, gravel, peat, muck)? If you
know the classification of agricultural soils, specify them, and note any agricultural land of long-term
commercial significance and whether the proposal results in removing any of these soils.
d.Are there surface indications or history of unstable soils in the immediate vicinity? Yes No.
If yes, describe.
e.Describe the purpose, type, total area, and approximate quantities and total affected area of any filling,
excavation, and grading proposed. Indicate source of fill.
f.Could erosion occur as a result of clearing, construction, or use? Yes No. If yes, generally describe.
g.About what percent of the site will be covered with impervious surfaces after project construction (for
example, asphalt or buildings)?
h.Proposed measures to reduce or control erosion, or other impacts to the earth, if any:
No removal or addition of soils. Operation being added to existing building that has existing concrete floor.
NA
NA
NA
NA
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 6 of 18
2.AIR
a.What types of emissions to the air would result from the proposal (i.e., dust, automobile, odors, industrial
wood smoke, greenhouse gases) during construction, operation, and maintenance when the project is
completed? If any, generally describe and give approximate quantities, if known.
b. Are there any off-site sources of emissions or odor that may affect your proposal? Ye X No
If yes, generally describe.
c.Proposed measures to reduce or control emissions or other impacts to air, if any:
3.WATER
a. Surface
1.Is there any surface water body on or in the immediate vicinity of the site (including year-round and
seasonal streams, saltwater, lakes, ponds, wetlands) ? Yes x No. If yes, describe type and provide
names. If appropriate, state what stream or river it flows into.
2.Will the project require any work over, in, or adjacent to (within 200 feet) the described waters?
Yes No. If yes, please describe and attach available plans.
3.Estimate the amount of fill and dredge material that would be placed in or removed from surface
water or wetlands and indicate the area of the site that would be affected. Indicate the source of fill
material.
4.Will the proposal require surface water withdrawals or diversions? Yes No.
Give general description, purpose, and approximate quantities if known.
5.Does the proposal lie within a 100-year floodplain? Yes No. If yes, note location on the site
plan.
No surface water bodies on premise.
No
NA
No
No
X
-Process will create VOC emissions from paint spray booth operations. See accompanied NOC for
spray booth operations
-Global Finishing spray booth filter systems to be installed on all equipment
emitting VOC's. See accompanying NOC for spray booth operations.
X
No
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 7 of 18
6.Does the proposal involve any discharges of waste materials to surface waters? Yes No. If yes,
describe the type of waste and anticipated volume of discharge.
b.Ground Water
1.Will groundwater be withdrawn from a well for drinking water or other purposes? Yes No.
If yes, give a general description of the well, proposed uses and approximate quantities withdrawn
from the well.
Will water be discharged to groundwater? Yes No. If yes, give general description, purpose,
and approximate quantities, if known.
2.Describe waste material that will be discharged into the ground from septic tanks or other sources, if
any (for example: domestic sewage; industrial, containing the following chemicals...; agricultural; etc.).
Describe the general size of the systems, the number of such systems, the number of houses to be
served (if applicable), or the number of animals or humans the system(s) are expected to serve.
c.Water Runoff (including storm water)
1.Describe the source of runoff (including storm water) and method of collection and disposal, if any
(include quantities, if known). Where will this water flow? Will this water flow into other waters?
Yes No. If yes, describe.
2.Could waste material enter ground or surface waters? Yes No. If yes, generally describe.
3.Does the proposal alter or otherwise affect drainage patterns in the vicinity of the site? Yes No.
If yes, describe.
d.Proposed measures to reduce or control surface, ground, and runoff water, and drainage pattern impacts,
impacts, if any:
No
No
NA
NA: Existing building
No
No
NA
No
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 8 of 18
4.PLANTS
a.Check the types of vegetation found on the site:
Deciduous Trees: Alder Maple Aspen other (specify):
Evergreen Trees: Fir Cedar Pine other (specify):
Shrubs
Grass
Pasture
Crop or Grain
Orchards, Vineyards, or other permanent crops
Other types of Vegetation (specify):
Wet Soil Plants: Cattail Buttercup other (specify):
Bulrush Skunk Cabbage
Water Plants: Water Lily Eelgrass Milfoil other (specify):
b.What kind and amount of vegetation will be removed or altered?
c.List threatened or endangered species known to be on or near the site.
d.Proposed landscaping, use of native plants, or other measures to preserve or enhance vegetation on the
site, if any:
e.List all noxious weeds and invasive species known to be on or near the site.
None
None
Planted beds/boxes in front of building entrance
NA
None. current site consists of concrete and asphalt
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 9 of 18
5.ANIMALS
a.Indicate birds and other animals that have been observed on or near the site or are known to be on or
near the site.
Birds: Hawk Heron other (specify):
Eagle Songbirds
Mammals: Deer Bear other (specify):
Elk Beaver
Fish: Bass Salmon Trout
Hearing Shellfish other (specify):
b.List any threatened or endangered species known to be on or near the site.
c.Is the site part of a migration route? Yes No. If yes, explain.
d.Proposed measures to preserve or enhance wildlife, if any:
e.List any invasive animal species known to be on or near the site.
6.ENERGY AND NATURAL RESOURCES
a.What kinds of energy (electric, natural gas, oil, woodstove, solar) will be used to meet the completed
project’s energy needs? Describe whether it will be used for heating, manufacturing, etc.
b.Would your project affect the potential use of solar energy by adjacent properties? Yes No.
If yes, generally describe.
c.What kinds of energy conservation features are included in the plans of this proposal? List other
proposed measures to reduce or control energy impacts, if any:
None known
None known
NA
NA
Electricity and Natural Gas will be used for manufacturing purposes.
No
Latest energy efficient machinery, batch work to control usage times, machinery switched to
only turn on when there is demand.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 10 of 18
7.ENVIRONMENTAL HEALTH
a.Are there any environmental health hazards, including exposure to toxic chemicals, risk of fire and
explosion, spill, or hazardous waste that could occur as a result of this proposal?
2.Describe any known or possible contamination at the site from present or past uses.
3.Describe existing hazardous chemicals/conditions that might affect project development and design.
This includes underground hazardous liquid and gas transmission pipelines located within the project
area and in the vicinity.
4.Describe any toxic or hazardous chemicals that might be stored, used, or produced during the
project's development or construction, or at any time during the operating life of the project.
5.Describe special emergency services that might be required.
6.Proposed measures to reduce or control environmental health hazards, if any:
b.Noise
1.What types of noise exist in the area that may affect your project (for example, traffic, equipment,
operation, other)?
2.What types and levels of noise would be created by or associated with the project on a short-term or
a long-term basis (for example, traffic, construction, operation, other)? Indicate what hours noise
would come from the site.
3.Proposed measures to reduce or control noise impacts, if any:
NA
Noise will occur inside existing building during construction and operation. Expectation
of under 70Db.
Contained within existing structure. All equipment being installed will be within OSHA limits.
Yes, Paint spray booth operation hazards that will be mitigated with proper use of ventilation,
fresh air systems for painters, spill hazard when mixing paint that will be mitigated with
properly installed mixing room containing curb surrounding structure.
None Known
Paints, reducers, solvents and cleaners related to paint coating operations will be stored in a
Global Finishing installed mixing room rated for 300 gallon capacity.
Fire and/or First Aid
Containing paint coating operation materials in specified mixing room and use of
proper ventilation to control VOC output, and fresh air system for painters within booth
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 11 of 18
8.LAND AND SHORELINE USE
a.What is the current use of the site and adjacent properties? Will the proposal affect current land uses on
nearby or adjacent properties? Yes No. If yes, describe.
b.Has the project site been used as working farmlands or working forest lands? Yes No. If yes,
describe. How much agricultural or forest land of long-term commercial significance will be converted to
other uses as a result of the proposal, if any? If resource lands have not been designated, how many acres
in farmland or forest land tax status will be converted to nonfarm or nonforest use?
1.Will the proposal affect or be affected by surrounding working farm or forest land normal business
operations, such as oversize equipment access, the application of pesticides, tilling, and harvesting?
Yes No. If yes, how?
c.Describe any structures on the site.
d.Will any structures be demolished? Yes No. If yes, what?
e.What is the current zoning classification of the site?
f.What is the current comprehensive plan designation of the site?
g.If applicable, what is the current shoreline master program designation of the site?
h.Has any part of the site been classified as a critical area by the city or community? Yes No.
If yes, specify.
i.Approximately how many people would reside or work in the completed project?
No affect on adjacent properties.
No
NO
NA
NO
Heavy Industrial
Plan designation does not apply for this site.
There is no shoreline master mapped to this site.
No
5
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 12 of 18
j.Approximately how many people would the completed project displace?
k.Proposed measures to avoid or reduce displacement impacts, if any:
l.Proposed measures to ensure the proposal is compatible with existing and projected land uses and plans,
if any:
m.Proposed measures to ensure the proposal is compatible with nearby agricultural and forest lands of long-
term commercial significance, if any:
9.HOUSING
a.Approximately how many units would be provided, if any? Indicate whether high- middle- or low-income
housing.
b.Approximately how many units, if any, would be eliminated? Indicate whether high- middle- or low-
income housing.
c.Proposed measures to reduce or control housing impacts, if any:
10.AESTHETICS
a.What is the tallest height of any proposed structure(s), not including antennas; what is the principal
exterior building material(s) proposed?
b.What views in the immediate vicinity would be altered or obstructed?
c.Proposed measures to reduce or control aesthetic impacts, if any:
None
NA
NA
NA
NA
NA
NA
None
NA
Current building is concrete construction
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 13 of 18
11.LIGHT AND GLARE
a.What type of light or glare will the proposal produce? What time of day would it mainly occur?
b.Could light or glare from the finished project be a safety hazard or interfere with views?
c.What existing off-site sources of light or glare may affect your proposal?
d.Proposed measures to reduce or control light and glare impacts, if any:
12.RECREATION
a.What designated and informal recreational opportunities are in the immediate vicinity?
b.Would the proposed project displace any existing recreational uses? Yes No. If yes, describe.
c.Proposed measures to reduce or control impacts on recreation, including recreational opportunities to be
provided by the project or applicant, if any:
13.HISTORIC AND CULTURAL PRESERVATION
a.Are there any buildings, structures, or sites, located on or near the site that are over 45 years old listed in
or eligible for listing in national, state, or local preservation registers located on or near the site?
Yes No. If yes, specifically describe.
b.Are there any landmarks, features, or other evidence of Indian or historic use or occupation? This may
include human burials or old cemeteries. Are there any material evidence, artifacts, or areas of cultural
importance on or near the site? Please list any professional studies conducted at the site to identify such
resources.
None
NA
NA
NA
NA
No
NA
No
None known
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 14 of 18
c.Describe the methods used to assess the potential impacts to cultural and historic resources on or near
the project site. Examples include consultation with tribes and the department of archeology and historic
preservation, archaeological surveys, historic maps, GIS data, etc.
d.Proposed measures to avoid, minimize, or compensate for loss, changes to, and disturbance to resources.
Please include plans for the above and any permits that may be required.
14.TRANSPORTATION
a.Identify public streets and highways serving the site or affected geographic area and describe proposed
access to the existing street system. Show on-site plans, if any.
b.Is site or affected geographic area currently served by public transit? Yes No. If yes, generally
describe. If not, what is the approximate distance to the nearest transit stop?
c.How many parking spaces would the completed project or non-project proposal have? How many would
the project or proposal eliminate?
d.Will the proposal require any new or improvements to existing roads, streets, pedestrian, bicycle or state
transportation facilities, not including driveways? Yes No. If yes, generally describe (indicate
whether public or private).
e.Will the project use (or occur in the immediate vicinity of) water, rail, or air transportation?
Yes No. If yes, generally describe.
f.How many vehicular trips per day would be generated by the completed project or proposal? If known,
indicate when peak volumes would occur and what percentage of the volume would be trucks (such as
commercial and nonpassenger vehicles). What data or transportation models were used to make these
estimates?
NA
NA
Site is accessed via Houser Way North. Site is an existing building so no impact.
No. Approximately 2 blocks to transit location.
NA. Existing building
No
No
No additional vehicular trips beyond current
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 15 of 18
g.Will the proposal interfere with, affect or be affected by the movement of agricultural and forest products
on roads or streets in the area? Yes No. If yes, generally describe.
h.Proposed measures to reduce or control transportation impacts, if any:
15.PUBLIC SERVICES
a.Would the project result in an increased need for public services (for example, fire protection, police
protection, public transit, health care, schools, other)? Yes No. If yes, generally describe.
b.Proposed measures to reduce or control direct impacts on public services, if any:
16.UTILITIES
a.Indicate utilities currently available at the site:
X Electricity X Natural gas X Water X Refuse Service
X Telephone X Sanitary Sewer Septic System Other (specify):
b.Describe the utilities that are proposed for the project, the utility providing the service, and the general
construction activities on the site or in the immediate vicinity that might be needed.
No
NA
No
NA
Proposed project will use existing utilities already available at the site including electricity,
water, natural gas and sewer.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 16 of 18
C. SIGNATURE
The above answers are true and complete to the best of my knowledge. I understand that the lead agency is
relying on them to make its decision.
Signature
Name
Position
Agency/Organization
Date Submitted
Mike Brown
CEO
Aero-Plastics, Inc
12-1-2021
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 17 of 18
D. SUPPLEMENTAL SHEET FOR NON-PROJECT ACTIONS
(Do not use this sheet for project actions)
Because these questions are very general, it may be helpful to read them in conjunction with the list of the
elements of the environment in section B of this checklist.
When answering these questions, be aware of how the extent the proposal, or the types of activities likely to
result from the proposal, would affect the item at a greater intensity or at a faster rate than if the proposal were
not implemented. Respond briefly and in general terms.
1. How would the proposal be likely to increase discharge to water; emissions to air; production, storage, or release
of toxic or hazardous substance; or production of noise?
Proposed measures to avoid or reduce such increases are:
2. How would the proposal be likely to affect plants, animals, fish, or marine life?
Proposed measures to protect or conserve plants, animals, fish, or marine life are:
3. How would the proposal be likely to deplete energy or natural resources?
Proposed measures to protect or conserve energy and natural resources are:
4. How would the proposal be likely to use or affect environmentally sensitive areas or areas designated (or eligible
or under study) for governmental protection; such as parks, wilderness, wild and scenic rivers, threatened or
endangered species habitat, historic or cultural sites, wetlands, floodplains, or prime farmlands?
Proposed measures to protect such resources or to avoid or reduce impacts are:
5. How would the proposal be likely to affect land and shoreline use, including whether it would allow or encourage
land or shoreline uses incompatible with existing plans?
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ENVIRONMENTAL CHECKLIST
Form No. 50-150 | CJC | 02/18 Page 18 of 18
Proposed measures to avoid or reduce shoreline and land use impacts are:
6. How would the proposal be likely to increase demands on transportation or public services and utilities?
Proposed measures to reduce or respond to such demand(s) are:
7. Identify, if possible, whether the proposal may conflict with local, state, or federal laws or requirements for the
protection of the environment.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
5
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 1 of 2
Form 50-114 | 03/20
NOC APPLICATION SUPPLEMENTAL FORM
Spray Coating Operations
This application is for activities or equipment that is:
☐New (including existing, unpermitted equipment)
☐Physical or operational modification of existing equipment
☐Relocation of existing equipment
This application is for activities or equipment that is:
☐Aerospace
☐Wood furniture
☐Motor vehicles
☐Other, please describe: ____________________________________________________________________
Hours of operation per day: ___________________ Hours of operation per year: ___________________
Spray Coating area is:
☐Spray booth/room
☐Outdoor spray area, describe enclosure: __________________________________________________
☐Prep area
☐Other, please describe: ____________________________________________________________________
Design Specifications
Volume of enclosure (cubic feet): ___________________________
Exhaust flow rate (cfm): ________________________
Make: ______________________________________ Model: ________________________________________
Exhaust System Overspray Control
☐Dry filter system:
Dry filter make: ___________________________ Dry filter model: ________________________________
Manometer or differential pressure gauge installed: ☐ Yes ☐ No
☐Water wash system:
Water flow rate (feet/minute): _______________________________
Flow meter installed: ☐ Yes ☐ No
Note: Spray coating operations for motor vehicles may
instead qualify for the General Order of Approval - Automotive
Refinishing Operations Spray Booths.
www.pscleanair.gov/AutobodyGeneralOrder
16 4000
512
6400
Global Finishing Solutions DFOCG-080808-NSB-2L-SP
Global Finishing Solutions FIL-EPP-2020-W
NA
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Spray Coating Operations
Page 2 of 2
Form 50-114 | 03/20
Spray Gun Parameters
Type of spray equipment:
☐Air-assisted airless
☐Airless; specify viscosity of coatings: ___________________________________
☐Electrostatic
☐High volume low pressure (HVLP)
☐Low volume low pressure (LVLP)
☐Other, please describe: ____________________________________________________________________
Stack Parameters
☐Stack information is specified on NOC Application Supplemental Form for proposed control device
☐Stack information specified below:
Stack damper/rain guard:
☐None ☐ Hexagonal ☐ Stack within stack ☐ Butterfly ☐ Inverted Cone
☐Other (specify): _____________________________
Stack diameter (inches): _______________ Stack height above ground (feet): _________________
Building Dimensions of project location:
Building Height (highest point of roof) (feet): ______________
Building Width (feet): _____________ Building Length (feet) _____________
Required Attachments
1.Table (Excel file preferred) containing proposed annual usage (gallons/year) of each coating, solvents
and other VOC containing materials. Coatings, solvents, and VOC containing materials must be
identified with manufacturer, name, product ID, and VOC content (lb/gal)
2.Safety Data Sheets (SDS) for each coating to be applied.
3.Environmental Data Sheets (EDS), Product Data Sheets (PDS), or SDS which show the VOC content
(lb/gal) of each coatings and solvents to be applied or used during surface preparation and surface
coating
24"32'
26'
189.8'169.9'
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 1 of 2
Form 50-114 | 03/20
NOC APPLICATION SUPPLEMENTAL FORM
Spray Coating Operations
This application is for activities or equipment that is:
☐New (including existing, unpermitted equipment)
☐Physical or operational modification of existing equipment
☐Relocation of existing equipment
This application is for activities or equipment that is:
☐Aerospace
☐Wood furniture
☐Motor vehicles
☐Other, please describe: ____________________________________________________________________
Hours of operation per day: ___________________ Hours of operation per year: ___________________
Spray Coating area is:
☐Spray booth/room
☐Outdoor spray area, describe enclosure: __________________________________________________
☐Prep area
☐Other, please describe: ____________________________________________________________________
Design Specifications
Volume of enclosure (cubic feet): ___________________________
Exhaust flow rate (cfm): ________________________
Make: ______________________________________ Model: ________________________________________
Exhaust System Overspray Control
☐Dry filter system:
Dry filter make: ___________________________ Dry filter model: ________________________________
Manometer or differential pressure gauge installed: ☐ Yes ☐ No
☐Water wash system:
Water flow rate (feet/minute): _______________________________
Flow meter installed: ☐ Yes ☐ No
Note: Spray coating operations for motor vehicles may
instead qualify for the General Order of Approval - Automotive
Refinishing Operations Spray Booths.
www.pscleanair.gov/AutobodyGeneralOrder
16 4000
512
6400
Global Finishing Solutions DFOCG-080808-NSB-2L-SP
Global Finishing Solutions FIL-EPP-2020-W
NA
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Spray Coating Operations
Page 2 of 2
Form 50-114 | 03/20
Spray Gun Parameters
Type of spray equipment:
☐Air-assisted airless
☐Airless; specify viscosity of coatings: ___________________________________
☐Electrostatic
☐High volume low pressure (HVLP)
☐Low volume low pressure (LVLP)
☐Other, please describe: ____________________________________________________________________
Stack Parameters
☐Stack information is specified on NOC Application Supplemental Form for proposed control device
☐Stack information specified below:
Stack damper/rain guard:
☐None ☐ Hexagonal ☐ Stack within stack ☐ Butterfly ☐ Inverted Cone
☐Other (specify): _____________________________
Stack diameter (inches): _______________ Stack height above ground (feet): _________________
Building Dimensions of project location:
Building Height (highest point of roof) (feet): ______________
Building Width (feet): _____________ Building Length (feet) _____________
Required Attachments
1.Table (Excel file preferred) containing proposed annual usage (gallons/year) of each coating, solvents
and other VOC containing materials. Coatings, solvents, and VOC containing materials must be
identified with manufacturer, name, product ID, and VOC content (lb/gal)
2.Safety Data Sheets (SDS) for each coating to be applied.
3.Environmental Data Sheets (EDS), Product Data Sheets (PDS), or SDS which show the VOC content
(lb/gal) of each coatings and solvents to be applied or used during surface preparation and surface
coating
24"32'
26'
189.8'169.9'
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 1 of 2
Form 50-114 | 03/20
NOC APPLICATION SUPPLEMENTAL FORM
Spray Coating Operations
This application is for activities or equipment that is:
☐New (including existing, unpermitted equipment)
☐Physical or operational modification of existing equipment
☐Relocation of existing equipment
This application is for activities or equipment that is:
☐Aerospace
☐Wood furniture
☐Motor vehicles
☐Other, please describe: ____________________________________________________________________
Hours of operation per day: ___________________ Hours of operation per year: ___________________
Spray Coating area is:
☐Spray booth/room
☐Outdoor spray area, describe enclosure: __________________________________________________
☐Prep area
☐Other, please describe: ____________________________________________________________________
Design Specifications
Volume of enclosure (cubic feet): ___________________________
Exhaust flow rate (cfm): ________________________
Make: ______________________________________ Model: ________________________________________
Exhaust System Overspray Control
☐Dry filter system:
Dry filter make: ___________________________ Dry filter model: ________________________________
Manometer or differential pressure gauge installed: ☐ Yes ☐ No
☐Water wash system:
Water flow rate (feet/minute): _______________________________
Flow meter installed: ☐ Yes ☐ No
Note: Spray coating operations for motor vehicles may
instead qualify for the General Order of Approval - Automotive
Refinishing Operations Spray Booths.
www.pscleanair.gov/AutobodyGeneralOrder
16 4000
512
6400
Global Finishing Solutions DFOCG-080808-NSB-2L-SP
Global Finishing Solutions FIL-EPP-2020-W
NA
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Spray Coating Operations
Page 2 of 2
Form 50-114 | 03/20
Spray Gun Parameters
Type of spray equipment:
☐ Air-assisted airless
☐ Airless; specify viscosity of coatings: ___________________________________
☐ Electrostatic
☐ High volume low pressure (HVLP)
☐ Low volume low pressure (LVLP)
☐ Other, please describe: ____________________________________________________________________
Stack Parameters
☐ Stack information is specified on NOC Application Supplemental Form for proposed control device
☐ Stack information specified below:
Stack damper/rain guard:
☐ None ☐ Hexagonal ☐ Stack within stack ☐ Butterfly ☐ Inverted Cone
☐ Other (specify): _____________________________
Stack diameter (inches): _______________ Stack height above ground (feet): _________________
Building Dimensions of project location:
Building Height (highest point of roof) (feet): ______________
Building Width (feet): _____________ Building Length (feet) _____________
Required Attachments
1. Table (Excel file preferred) containing proposed annual usage (gallons/year) of each coating, solvents
and other VOC containing materials. Coatings, solvents, and VOC containing materials must be
identified with manufacturer, name, product ID, and VOC content (lb/gal)
2. Safety Data Sheets (SDS) for each coating to be applied.
3. Environmental Data Sheets (EDS), Product Data Sheets (PDS), or SDS which show the VOC content
(lb/gal) of each coatings and solvents to be applied or used during surface preparation and surface
coating
24"32'
26'
189.8'169.9'
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
product 6W60-GRE18892
information WATERBASE GRAY 2-COMPONENT
POLYURETHANE PRIMER
Cardinal's 6W60-GRE18892 catalyzed with 6WHP at low VOC is a waterbase aliphatic
two-component polyurethane primer. This material is formulated with improved opacity
properties. 6W00 series is formulated to meet strict air quality regulations, while
maintaining the application and performance benefits of a conventional polyurethane
coating.
TYPICAL USES: BENEFITS:
Primer for decorative and protective
use on plastic
Electronic enclosures
Medical equipment
Low VOC
Excellent chemical and solvent
resistance
RoHS / WEEE Compliant
CURED FILM PROPERTIES:
Testing conducted on 6W60-GRE18892 semi-gloss gray catalyzed with 6WHP-L2524 at
2.0 mils DFT (Dry Film Thickness) over 20 gauge Bonderite 1000® test panels, cured
30 minutes at 180°F and air dried 14 days.
TEST METHOD PARAMETERS RESULT
Hardness ASTM D3363 Pencil H - 2H
Humidity ASTM D2247 250 hrs No effect
Solvent
Resistance
ASTM D4752
MEK 50 rubs
IPA 100 rubs
No effect
No effect
Chemical &
Stain
Resistance
ASTM D1308
30 min. spot
A: No effect
B: Slight
dulling
C: Moderate
effect
D: Discolored
& softened
A – IPA, hydrogen peroxide, cavicide, 409®, toluene,
hydrochloric acid, textile spirits, amyl acetate,
trichloroethylene, methanol, ethylene dichloride, lacquer
thinner, Xylene, Ethanol.
B – Acetone, MEK.
C – 50% sulfuric acid, 2.5N sodium hydroxide
FOR INDUST RIAL USE ONL Y
NOT FOR RESIDENT IAL USE
TYPE: Polyurethane.
COMPONENTS: Two.
COLOR: Gray.
GLOSS: Flat.
COVERAGE: At 1.0 mil DFT, 65% transfer efficiency(TE)
Mixed paint, 1.0 lbs/gal: 430 ft2/gal.
Calculation: 1604 ft2/gal x % volume solids x TE ÷ DFT
VOC MIXED: 224 grams/liter (2.0 lbs/gal)
excluding exempt
123 grams/liter (1.0 lbs/gal)
Including exempt
See mix ratio table below.
VOLUME SOLIDS:
6W60-GRE18892…………. 34%
6WHP-L2524 …………… 69%
Mixed to 1.0 lbs/gal ……. 41%
FLASH POINT: > 212 °F TCC
SHELF LIFE: 6 months from date of manufacture in
factory sealed container.
APPLICATION: After preparing the surface, thoroughly mix
component 1 before adding catalyst. Mix only the
amount of material needed. The base to catalyst
proportion must be measured accurately, by volume
only, to obtain optimum film properties. Mix paint and
catalyst thoroughly before adding water for
sprayability. Be aware of spray-able pot life. Brushing,
rolling and dipping are not recommended.
MIX RATIOS: Two components must be mixed properly to
obtain coating performance.
Parts are PRIMER
by volume FLAT
6W60-GRE18892
6WHP-L2524 catalyst
4
1
VISCOSITY: 45‖-55‖ #3 Zahn range.
SPRAY-able Pot Life: 2 hrs. at 1.0 lbs. VOC/gal
RECOMMENDED DFT: 1.5 – 2.5 mils (depending on color)
CURE: Air Dry Force Dry *
Tack free 2 hrs. 1 hr at 120° F
Dry to handle 24 hrs. 30 min at 140° F
Dry hard 72 hrs. 15 min at 180° F
(At 1.5 mils dry film thickness, 78° F, 50% RH)
* Some Air quality regulations require a maximum temp.
of 194° F to qualify as an ―air dry‖ system which generally
have higher VOC limits than baking systems.
SURFACE PREPARATION AND PRIMING: The most important steps in a successful coating
process are cleaning, pretreatment and priming. The following is a brief outline of
some basics for unpainted substrates. It is not intended to be all-inclusive. For more
information on your particular application contact Cardinal.
Cleaning the substrate: All surfaces to be coated, must be free of dirt, grease, oil,
oxidation, mill scale, and all other contaminants. The surface must be thoroughly dry
before painting. Air quality regulations have limited the allowable emissions from
cleaning operations.
Plastic — All mold release agents should be completed removed. Cardinal’s 6W60
series two component Polyurethane primer is compatible with a variety of plastics,
however, since there are numerous formulations of plastics, a trail sample should
be painted and tested prior to production.
(Continued on page 2)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
6W60-GRE18892 Page 2
IMPORTANT: Warranty and Disclaimer — The performance characteristics of these products vary according to product application, operating conditions, materials appli ed to or with and use. Since
these factors can affect results, we strongly recommend that you make your own test to determine to y our satisfaction whether the product is of acceptable quality, has not been affected by storage or
transport and is suitable for your particular purpose under your own operation conditions prior to using any product in full scale production. Seller warrants the products to be free from defects in materials
and workmanship. SUCH WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. No representative of ours has authority to waive or change this provision, which applies to all sales of these products.
TOPCOAT SELECTION:
PRODUCT NO. DESCRIPTION FUNCTION
6200- 2K Polyurethane Excellent chemical resistance
6W00- W/B 2K Primer Gray Good performance
TROUBLE SHOOTING:
PROBLEM CAUSE REMEDY
Blisters, pin
holes or
solvent pop
In air line:
Water contamination.
Entrapped air.
Entrapped solvent
Eliminate water – Check air lines. Use fresh
catalyst. Use urethane grade thinners.
Increase atomization, decrease film build.
Craters Contaminated ambient air,
e.g., silicone mist, dust.
Locate and eliminate source of contamination.
Fish-eyes Substrate contamination. Clean and prepare substrate.
Not drying Alcohol in reducer.
Wrong catalyst ratio.
Double check mix ratio.
Poor
adhesion
Improper surface
preparation.
See surface preparation section.
Gloss
variation
Variation in application, cure
schedule, catalyst ratio,
humidity.
Consistent gloss depends upon consistent
process.
PRODUCT IDENTIFICATION
6 W 6 0 – G R E 1 8 8 9 2 (example)
Color number
Gloss: 4 = semi gloss 40°
Smooth finish
Product type
APPLICATION EQUIPMENT: Most air quality regulations
require the paint application transfer efficiency to be
65% or better. This generally means using
electrostatic or high volume low pressure (HVLP)
spray guns. Otherwise, conventional pressure feed,
airless or air assisted airless spray equipment can be
used. Air supply lines need water and oil traps.
EQUIPMENT CLEAN-UP: Water clean up should be done as
soon as possible keeping in mind the pot life of the
mixed paint. Avoid leaving catalyzed paint in the
lines. Air quality regulations have limited the allowable
emissions from cleaning operations.
PRODUCT LIMITATIONS:
Catalyst reacts with water. Air supply should be dry.
Containers should be kept tightly closed. Use urethane
grade thinners only.
Alcohols and glycols interfere with curing chemistry and
should be avoided. They can be found in some lacquer
thinners and certain synthetic reducers.
Optimum film properties are dependent upon proper
mixing of paint and catalyst.
SAFETY: Refer to the product’s Material Safety Data
Sheet (MSDS) for complete safety information.
Contains organic solvents. Use with adequate
ventilation. Do not breathe vapors or spray mists. If
component TLVs are exceeded, a NIOSH approved air
supplied respirator is advised. See MSDS for TLV
information.
Contents are FLAMMABLE. Keep from heat, sparks or
open flame.
Allergic reactions are possible. Avoid use by persons
with respiratory problems.
Avoid contact with eyes, skin, and clothing. Wash
thoroughly after handling.
FIRST AID:
Eye contact: flush immediately with plenty of water
for at least 15 min. and get medical attention.
Skin contact: wash thoroughly with soap and water
for 5 minutes.
If swallowed, do not induce vomiting and get medical
attention immediately.
G12TL
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 1 of 15
SAFETY DATA SHEET
6W60-GRE18892-FR HIGH HIDE GRAY
WATERBORNE 2K POLYURETHANE
1. PRODUCT AND COMPANY IDENTIFICATION
MANUFACTURER
Cardinal Industrial Finishes
1329 Potrero Ave
S. El Monte, CA,
626 444-9274
24 HR. EMERGENCY TELEPHONE NUMBER
CHEMTREC (US Transportation): (800)424-9300
CHEMTREC (International : 1(202)483-7616
Transportation)
WEB: WWW.CARDINALPAINT.COM
2. HAZARDS IDENTIFICATION
PICTOGRAMS
SIGNAL WORD : WARNING
HAZARD STATEMENTS :
H302+H332 Harmful if inhaled or swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure.
PRECAUTIONARY STATEMENTS :
P264 Wash thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER/doctor.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P403 Store in a well-ventilated place.
S36 Wear suitable protective clothing.
S37 Wear suitable gloves.
R40 Limited evidence of a carcinogenic effect.
P501 Dispose of in accordance with Local, Regional, State, Federal, and International Regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name Weight % CAS Number
DATE ISSUED : 7/5/2019
SDS REF. No: 6W60-GRE18892-FR
PRODUCT NAME: 6W60-GRE18892-FR HIGH HIDE GRAY WATERBORNE 2K POLYURETHANE
PRODUCT CODE: 6W60-GRE18892-FR
PRODUCT USE: Industrial Waterborne Paint
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 2 of 15
Titanium Dioxide 35% - 40% 13463-67-7
Ethylene glycol mono butyl ether 1% - 5% 111-76-2
Amorphous Silica 1% - 5% 7631-86-9
Aluminum 1% - 5% 7429-90-5
4. FIRST AID MEASURES
Description of first aid measures.
EYES CONTACT : EYE CONTACT: Moderate irritation, tearing or blurred vision.
SKIN CONTACT : SKIN CONTACT: Moderate irritation possible from prolonged exposure; defatting and dermatitis.
INGESTION : INGESTION: Can cause gastrointestinal irritation, headache, dizziness, nausea and weakness.
INHALATION : INHALATION: May cause nasal irritation, headache, dizziness, nausea, weakness or vomiting. Loss of
consciousness.
Most important symptoms and effects, both acute and delayed. Symptoms/injuries: Eye irritation
Symptoms/injuries after inhalation: May cause drowsiness or dizziness.
Symptoms/injuries after eye contact: Cause serious eye irritation.
Symptoms/injuries after ingestion: Ingestion may cause nausea, vomiting and diarrhea.
Indication of any immediate medical attention and special treatment needed.
If medical advise is needed, have product container or label on hand.
5. FIRE FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA : Foam, alcohol foam, CO2, dry chemical, water fog.
FIRE FIGHTING PROCEDURE : Firefighting instructions: Use water spray or fog for cooling exposed containers. Exercise
caution when fighting any chemical fire. Prevent fire-fighting water from entering the environment.
Protection during firefighting: Firefighters should wear full protective gear. Do not enter fire area without proper protecti ve
equipment, including self-contained breathing apparatus with full face piece operated in pressure demand or other positive
pressure modes.
UNUSUAL FIRE AND EXPLOSION HAZARD : Fire hazard: Highly flammable/liquid or vapor.
Explosive hazard: May form flammable/explosive vapor-air mixture.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES :
General measures: Remove ignition sources. Use special care to avoid static electric charges. No smoking.
FOR NON-EMERGENCY PERSONNEL :
For non-Emergency procedures: Evacuate unnecessary personnel.
FOR EMERGENCY RESPONDERS :
Equip cleanup crew with proper protection. Avoid breathing fume, vapors.
ENVIRONMENTAL PRECAUTIONS :
Prevent entry to sewers and public waters.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEAN UP :
Collect damaged aerosols and use absorbent and/or inert material, then place in suitable container.
7. HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING : Additional hazards when processed: Handle empty containers with care because
residual vapors are flammable.
Precautions for safe handling: Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when you are leaving work. Provide good ventilation in process area to prevent formation of vapor. No
smoking. Use only non-sparking tools. Use outdoors or in a well ventilated area. Avoid breathing fume, vapors.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 3 of 15
Hygiene measures: Wash Skin thoroughly after handling.
CONDITIONS FOR SAFE STORAGE, INCLUDING INCOMPATIBILITIES : Storage conditions: Store in a dry, cool and
well-ventilated place away from: Heat sources. Direct sunlight.
Incompatible products: Strong bases. Strong acids.
Incompatible materials: Source of ignition. Direct sunlight. Heat Sources.
8. EXPOSURE CONTROLS\PERSONAL PROTECTION
Aliphatic Solvent(64742-47-8)
USA OSHA OSHA OEL (TLV) TWA Table Z-1 500 ppm, 2,000 mg/m3
USA ACGIH ACGIH (TLV) TWA 200 mg/m3
USA OSHA OSHA OEL Table Z-1 5 mg/m3
USA NIOSH NIOSH REL (TWA) 5 mg/m3
USA NIOSH NIOSH REL (ST) 10 mg/m3
Aluminum(7429-90-5)
USA OSHA USA OSHA (TWA) Table Z-1 5 mg/m3
USA ACGIH USA ACGIH (TLV) TWA 1 mg/m3
USA NIOSH USA NIOSH (REL)TWA 10 mg/m3
Cumene(98-82-8)
USA ACGIH ACGIH (TLV) TWA 50 ppm
USA OSHA OSHA (TWA) Table Z-1 50 ppm, 245 mg/m3
USA NIOSH NIOSH (TWA) REL 50 ppm, 245 mg/m3
Dipropylene Glycol Methyl Ether(34590-94-8)
USA ACGIH ACGIH TLV TWA 100 ppm
USA ACGIH ACGIH TLV STEL 150 ppm
USA OSHA OSHA Table Z-1 TWA 1000 ppm , 600 mg/m3
USA NIOSH NIOSH TWA 100 ppm , 600 mg/m3
USA NIOSH NIOSH ST 150 ppm , 900 mg/m3
Ethylene glycol mono butyl ether(111-76-2)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA NIOSH NIOSH REL (ppm) 5 ppm
USA OSHA OSHA TABLE Z-1 TWA (mg/m3) 50 ppm, 240 mg/m3
USA OSHA OSHA PO TWA (ppm) 25 ppm
Isobutyl Alcohol(78-83-1)
USA OSHA OSHA PEL 100 ppm, 300 mg/m3
USA ACGIH ACGIH TWA 50 ppm
Naphtha, petroleum, hydrodesulfurized heavy(64742-82-1)
USA OSHA OSHA (OEL) TWA Table Z-1 500 ppm, 2,000 mg/m3
Phenylethane(100-41-4)
USA ACGIH ACGIH TWA 20 ppm
USA ACGIH ACGIH STEL 125 ppm
USA NIOSH NIOSH REL 100 ppm, 435 mg/m3
USA NIOSH NIOSH REL (ST) 125 ppm, 545 mg/m3
USA OSHA OSHA TWA (Table Z-1) 100 ppm, 435 mg/m3
USA OSHA OSHA STEL 125 ppm, 545 mg/m3
Pseudocumene(95-63-6)
USA NIOSH NIOSH (TWA) REL 25 ppm, 125 mg/m3
Titanium Dioxide(13463-67-7)
PEL (Permissible Exposure Limit) OSHA TWA 15 mg/m3
TLV ACGIH TWA 10 mg/m3
Xylene(1330-20-7)
USA ACGIH ACGIH TWA 100 ppm
USA ACGIH ACGIH STEL 150 ppm
USA OSHA OSHA TWA (Table Z-1) 100 PPM, 435 mg/m3
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION : If TLV of the product or any component is exceeded, a NIOSH approved Air Supplied
Respirator is advised in absence of environmental control. OSHA Regulations also permit other NIOSH Respirators under
specified conditions. (See your Safety Equipment Supplier) Engineering or administrative controls should be implemented
to reduce exposure.
HAND PROTECTION REMARKS : The suitability for a specific workplace should be discussed with the producers of the
protective gloves.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 4 of 15
EYES PROTECTION : Do not get in eyes. Solvent resistant safety eyewear with splash guards or side shields is
recommended.
SKIN AND BODY PROTECTION : Prevent repeated or prolonged skin contact with GB Protective Handcream, wear
impervious clothing and chemical resistant boots.
WORK HYGIENIC PRACTICES: Remove and wash soiled clothing before reuse. Wash hands with soap and water after
handling paint, before eating, using the rest room or smoking.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state : Liquid
Color : Gray
Odor : Characteristic. Sweet. Mint like.
Odor threshold : No data available.
Ph : N/A – See Technical Data Sheet
Evaporation rate : Slower Than Ether
Melting point : -94.7 C (-138.46 F)
Freezing point : No data available.
Boiling point : 226.0 deg F TO 334.0 deg F
Flash point : Above 212 deg F
Lower explosion limit : 0.6
Upper explosion limit : 14.0
Vapor pressure : 185 mm Hg
Vapor density : Heavier than air
Relative density : No data available.
Density : 12.1579
Solubility : No data available.
Partion coefficient: n-
octanol/water
: No data available.
Autoignition temperature : No data available.
Decomposition temperature : No data available.
10. STABILITY AND REACTIVITY
REACTIVITY : No dangerous reaction known under conditions of normal use.
CHEMICAL STABILITY : Stable.
CONDITIONS TO AVOID : Extremely high temperatures, poor ventilation and excessive aging.
INCOMPATIBLE MATERIALS : Avoid contact with strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS: Hazardous decomposition may produce carbon dioxide and/or carbon
monoxide.
11. TOXICOLOGICAL INFORMATION
Aliphatic Solvent(64742-47-8)
Acute toxicity No data available.
Acute Inhalation
toxicity
No data available.
Acute Dermal toxicity No data available.
Skin
corrosion/irritation
Skin - Rabbit Result: No skin irritation - 4 h
Serious eye
damage/eye irritation
Eyes - Rabbit Result: No eye irritation
Respiratory or skin
sensitization
Draize Test - Guinea pig Result: Does not cause skin sensitization.
Germ cell mutagenicity Reverse mutation assay S. typhimurium Result: negative
Carcinogenicity IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (Distillates (petroleum),
hydrotrated light, kerosene - unspecified) NTP: No component of this product present at levels
greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ No data available.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 5 of 15
toxicity - single
exposure
Specific target organ
toxicity - repeated
exposure
No data available.
Aspiration hazard No data available.
Additional Information RTECS: Not available Prolonged or repeated exposure to skin causes defatting and dermatitis.,
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Aluminum(7429-90-5)
Acute Toxicity No data available.
Acute Toxicity -
Inhalation
No data available.
Acute Toxicity -
Dermal
No data available.
Skin Corrision/irritation No data available.
Serious eye
damage/eye irritation
No data available.
Respiratory or skin
sensitisation
No data available.
Germ cell mutagenicity No data available.
Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified
as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal
to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ
toxicity - single
exposure
No data available.
Specific target organ
toxicity - repeated
exposure
No data available.
Aspiration hazard No data available.
Additional Information RTECS: BD0330000 To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated.
Cumene(98-82-8)
LD50 Oral - Rat - Acute
toxicity
2,260 mg/kg,
Inhalation: No data available.
Dermal No data available.
Skin
corrosion/irritation
Skin - Rabbit Result: No skin irritation. (OECD Test Guideline 404)
Serious eye
damage/eye irritation
Eyes - Rabbit Result: No skin irritation. (OECD Test Guideline 405)
Respiratory or skin
sensitization
Guinea pig - Result: No skin irritation. (OECD Test Guideline 406)
Germ cell mutagenicity invitro assay, S. typhimurium, Result: negative
Carcinogenicity Carcinogenicity IARC: 2B - Group 2B: Possibly carcinogenic to humans (Cumene) ACGIH: No
component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at
levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified
as a carcinogen or potential carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ
toxicity - single
exposure
No data available.
Specific target organ
toxicity - repeated
exposure
No data available.
Aspiration hazard No data available.
Additional Information RTECS: GR8575000
Dipropylene Glycol Methyl Ether(34590-94-8)
LD50 Oral (RAT) 5,152 mg/kg
Inhalation No Data Available
Dermal No Data Available
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 6 of 15
Skin Corrosion /
Irritation Serious eye
damage / eye irritation
(EYES , RABBIT)
24 h
Respiratory or skin
sensitisation
No Data Available
Germ Cell Mutagenicity No Data Available
Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified
as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal
to 0.1% is identified as a carcinogen or potential carcinogen by NTP. OSHA: No component of
this product present at levels greater than or equal to 0.1% is identified as a carcinogen or
potential carcinogen by OSHA.
Reproductive Toxicity No Data Available
Specific target organ
toxicity - Single
Exposure
No Data Available
Specific target organ
toxicity - Repeated
Exposure
No Data Available
Aspiration Hazard No Data Available
Additional Information RTECS: JM 1575000 TO the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated. Stomach , Irregularities , Based on Human
evidence. Stomach , Irregularities , Based on Human evidence.
Dipropylene Glycol n-Butyl Ether(29911-28-2)
LD50 Oral - Rat - Acute
Toxicity
4,000 mg/kg - rat - Inhalation: No data available.
LD50 Dermal - Rat > 2,000 mg/kg, No data available.
Skin
corrosion/irritation
Skin - rabbit
Serious eye
damage/eye irritation
Eyes - rabbit Eyes - rabbit
Respiratory or skin
sensitsation Germ cell
mutagenicity
No data available.
Carcinogenicity IARC- No component of this product present at levels greater than or equal to 0.1% is identified
as probable, possible or confirmed human carcinogen by IARC. ACGIH- No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH. NTP- No component of this product present at levels greater than or equal
to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA- No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ
toxicity - single
exposure
No data available.
Specific target organ
toxicity - repeated
exposure
No data available.
Aspiration hazard No data available.
Additional Information RTECS: UA8200000 To the best of our knowledge, the chemical, physical, and toxicological
properties have not been thoroughly investigated. Stomach - Irregularities - Based on Human
Evidence Stomach - Irregularities - Based on Human Evidence
Ethylene glycol mono butyl ether(111-76-2)
LC50 (rat) Oral Acute toxicity estimate: 500 mg/kg; Method: Expert judgment.; Assessment: the
component/mixture is moderately toxic after single ingestion.
LC50 (rat) inhalation Acute inhalation toxicity: 500 ppm, Exposure time: 4 h; Assessment: the component/mixture is
moderately toxic after short term inhalation.
LD50 (rat) dermal Acute toxicity estimate: 1,1000 mg/kg; Method: Expert judgment; Assessment: the
component/mixture is moderately toxic after single contact with skin.
Skin
corrosion/irritation
Remarks: Moderate skin irritation in susceptible persons., Species rabbit, Exposure time 24 h,
Result: Mild skin irritation
Serious eye damage/
eye irritation
Species rabbit, Exposure time 24 h, Result: Irritating to eyes.
Respiratory or skin
sensitation
Test Type: Maximization test, Species guinea pig, Result: Did not cause sensitisation on
laboratory animals.
Germ cell mutagenicity Genotoxicity in vitro: Test Type: Mammalian cell gene mutation assay; Test species: Chineese
hamster (CHO), Metabolic activation: with and without metabolic activation. Result: negative.,
Genotoxicity in vivo: Test Type: In vivo micronucleus test., Test species:: mouse (male),
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 7 of 15
application Route: Intraperitoneal, Result: negative., Germ cell mutagenicity Assessment: Tests
on bacterial or mammalian did not show mutagenic effects.
Carcinogenicity Species mouse, Application Route: Inhalation, Exposure time 2 yr, Activity duration: 6 h,
Frequency of Treatment: 5 days/week, NAOEL: 125 ppm Result: Limited evidence of
carcinogenic effects with no relevance to humans., Carcinogenicity-Assessment: Not evidence of
carcinogenicity in animal studies..
Reproductive toxicity Effects on fertility : Test Type: Two-generation study Species: mouse Application Route: oral
Fertility: NOAEL: 720 mg/kg body weight Symptoms: Reduced fertility Result: Reduced fertility
at maternally toxic doses Effects on fetal development : Test Type: Embryo-fetal development
Species: rat Application Route: Inhalation Duration of Single Treatment: 10 d Frequency of
Treatment: 6 hr/day Developmental Toxicity: Lowest observed adverse effect level: 100 ppm
Result: Developmental toxicity occurred at maternal toxicity dose levels Reproductive toxicity -
Assessment : No evidence of adverse effects on sexual function and fertility, and on
development, based on animal experiments
STOT - single exposure No data available.
STOT - repeated
exposure
No data available.
Aspiration toxicity Remarks: No data available.
Further information Product Remarks: Symptoms of overexposure may be headache, diaainess, titedness, nausea
and vomiting.,
Repeated dose toxicity Species: rat NOAEL: 30, Application Route: Inhalation Exposure time: 14 wk Number of
exposures: 6 h/d, 5 d/wk.
Isobutyl Alcohol(78-83-1)
LD50 Oral - Rat (Acute
Toxicity)
2460 mg/kg
LD50 Dermal - Rabbit 3400 mg/kg
LC50 Inhalation - Rat 8000 ppm; (4 h)
Carcinogenicity Data: The ingredient(s) of this product is (are) not classified as carcinogenic by ACGIH, IARC, OSHA or
NTP.
Reproductive Data: No adverse reproductive effects are anticipated.
Mutagenicity Data: No adverse mutagenicity effects are anticipated.
Tetragenicity Data: No adverse Tetragenicity effects are anticipated.
Respiratory / Skin
Sensitization Data:
None known.
Sysnergistic Materials: Alcohols may interact synergistically with chloeinated solvents (example - carbon tetrachloride,
chloroform, bromotrichloromethane), dithiocarbamates (example - disulfiram),
dimethylnitrosamine and thioacetamide.
Naphtha, petroleum, hydrodesulfurized heavy(64742-82-1)
LD50 Oral - Rat - Acute
toxicity
5,000 mg/kg - 4h - Oral - Rat
LC50 Inhalation - Rat -
male and female
> 7,630 mg/m3 - Rat - male and female - 4 h, (OECD Test Guideline 403)
LD50 Dermal - Rabbit -
Male and female
>2,000 mg/kg - Rabbit - male and female, (OECD Test Guideline 402)
Skin
corrosion/irritation
No data available.
Serious eye
damage/eye irritation
Eyes - Rabbit Result: No eye irritation (OECD Test Guideline 405)
Respiratory or skin
sensitization
Buehler Test - Guinea pig Result: Does not cause skin sensitization. (OECD Test Guideline 406)
Germ cell mutagenicity S. typhimurium Result: negative
Carcinogenicity IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans () ACGIH: No component
of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or
potential carcinogen by ACGIH. NTP: No component of this product present at levels greater
than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No
component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ
toxicity - single
exposure
No data available.
Specific target organ
toxicity - repeated
exposure
No data available.
Aspiration hazard No data available. The substance or mixture is known to cause human aspiration toxicity hazards
or has to be regarded as if it causes a human aspiration toxicity hazard.
Additional Information RTECS: Not available Stomach - Irregularities - Based on Human Evidence (Benzene)
Phenylethane(100-41-4)
LC50 (Mouse, Male) 10 mg/l Assessment: The component/mixture is moderately toxic after short term inhalation.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 8 of 15
LD50 (rabbit) 15,433 mg/kg
Skin
corrosion/irritation
Species: rabbit Result: Mild skin irritation
Serious eye
damage/eye irritation
Species: rabbit Result: Mild eye irritation Remarks: No data available
Respiratory or skin
sensitization
Remarks: No data available
Germ cell mutagenicity Genotoxicity in vitro, Test Type: Chromosome aberration test in vitro Test species: Chinese
hamster ovary (CHO) Metabolic activation: with and without metabolic activation Method: OECD
Test Guideline 473 Result: negative GLP: no : Test Type: Mammalian cell gene mutation assay
Test species: mouse lymphoma cells Metabolic activation: with and without metabolic activation
Method : OECD Test Guideline 476 Result: negative GLP: yes Genotoxicity in vivo : Test Type:
In vivo micronucleus test species: mouse (male) Application Route: Oral Method: OECD Test
Guideline 474 Result: negative GLP: yes Test Type: DNA damage and/or repair Test species:
mouse (male and female)Application Route: Inhalation Method: OECD Test Guideline 486
Result: negative GLP: yes Germ cell mutagenicity Assessment : In vivo tests did not show
mutagenic effects
Carcinogenicity Species: mouse, (male and female) Application Route: Inhalation Exposure time: 103 wk
Activity duration: 6 h Dose: 0, 75, 250, 750 ppm Frequency of Treatment: 5 days/week NOAEL:
250 ppm Method: OECD Test Guideline 453 Result: evidence of carcinogenic activity Symptoms:
increased incidences of alveolar/bronchiolar neoplasms, increase incidence of hepatocellular
carcinomas GLP: yes Carcinogenicity - Assessment : Carcinogenicity classification not possible
from current data.
Reproductive toxicity Effects on fertility : Test Type: One generation study Species: rat, male and female Application
Route: Inhalation Dose: 0, 100, 500 and 1000 ppm Duration of Single Treatment: 6 h General
Toxicity - Parent: NOAEC: 1,000 ppm General Toxicity F1: NOAEC: 100 ppm Symptoms:
Reduced fetal weight. Reduced offspring weight gain. Method: OECD Test Guideline 415 Result:
No reproductive effects. GLP: yes Effects on fetal development : Species: rat Application Route:
Inhalation Dose: 0, 100, 500, 1000, 2000 ppm Duration of Single Treatment: 15 d General
Toxicity Maternal: NOAEC: 500 ppm Teratogenicity: NOAEC: 2,000 ppm Developmental Toxicity:
NOAEC: 500 ppm Symptoms: Reduced body weight Method: OECD Test Guideline 414 Result:
Developmental toxicity occurred at maternal toxicity dose levels GLP: No data available
Reproductive toxicity - Assessment : No toxicity to reproduction Did not show teratogenic effects
in animal experiments.
STOT - single exposure No data available.
STOT - repeated
exposure
Target Organs: Auditory system Assessment: May cause damage to organs through prolonged
or repeated exposure., The substance or mixture is classified as specific target organ toxicant,
repeated exposure, category 2.
Repeated dose toxicity Species: rat, male and female NOAEL: 75 mg/kg Application Route: Oral Exposure time: 28 d
Dose: 75, 250 and 750 mg/kg bw/day Method: OECD Test Guideline 407 GLP: yes Symptoms:
Increased kidney and liver weights
Aspiration toxicity May be fatal if swallowed and enters airways.
Pseudocumene(95-63-6)
LD50 Oral - Rat - Acute
toxicity
6,000 mg/kg, Rat - male.
Inhalation: No data available.
Dermal: No data available
Skin
corrosion/irritation
No data available
Serious eye
damage/eye irritation
No data available.
Respiratory or skin
sensitization
No data available.
Germ cell mutagenicity in vitro assay S. typhimurium Result: negative Mutagenicity (micronucleus test) Rat - male and
female - Bone marrow Result: negative
Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified
as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal
to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No component of this
product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
Reproductive toxicity No data available.
Specific target organ
toxicity - single
exposure
No data available.
Specific target organ
toxicity - repeated
exposure
No data available.
Additional Information RTECS: DC3325000 prolonged or repeated exposure can cause:, narcosis, Bronchitis.,
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 9 of 15
Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and
in extreme cases, loss of consciousness., To the best of our knowledge, the chemical, physical,
and toxicological properties have not been thoroughly investigated. Central nervous system
Titanium Dioxide(13463-67-7)
ORAL ALD (rat) >2400 mg/kg
Dermal ALD (rabbit) >10000 mg/m3
Inhalation 4 h ALC >6.82 mg/l
Skin irritation slight irritation
Eye irritation slight irritation
Sensitation Did not cause sensitation on laboratory animals.
Carcinogenicity In lifetime inhalation studies rats were exposed for 2 years to respectively 10, 50, 250 mg/m3 of
respirable Ti02.
Xylene(1330-20-7)
Acute toxicity Product Acute oral toxicity : Acute toxicity estimate : 3,523 mg/kg Method: Calculation method.
Acute inhalation
toxicity
Acute toxicity estimate, 4631 ppm Exposure time, 4 h Test atmosphere: gas Method; Calculation
method.
Acute dermal toxicity Acute toxicity estimate : 1,100 mg/kg Method: Expert judgment.
LC50 (rat, male) Oral 3,523 mg/kg Method: EU Method B.1 (Acute Toxicity, Oral) Target Organs: Kidney, Bladder GLP:
no
LC50 (rat, male)
Inhalation
6700 ppm Exposure time: 4 h Method: Directive 67/548/EEC, Annex V, B.2. GLP: No data
available Assessment: The substance or mixture is classified as specific target organ toxicant,
single exposure, category 3 with respiratory tract irritation. Remarks: Acutely Toxic Category 4
Skin
corrosion/irritation
Species: rabbit Exposure time: 24 h Result: Irritating to skin Remarks: Skin irritation, Category
2
Serious eye
damage/eye irritation
Species: rabbit Result: Mild eye irritation
Respiratory or skin
sensitization
Remarks: No data available
Germ cell mutagenicity Test Type: Chromosome aberration test in virto. Test Species: Chinese hamster ovary (CHO)
Metabolic Activation: With and without metabolic activation. Method Mutagenicity (in vitro
mammalian cytogenetic test) Result: Negative. Test Type: Sistrer chromatic exchange assay in
mammalian cells.
Germ cell mutagenicity
Assessment
Animal testing did not show any mutagenic effects.
Carcinogenicity Species: mouse, (male and female) Application Route: Oral Exposure time: 103 wk Dose: 0, 500
or 1000 mg/kg Frequency of Treatment: 5 days/week Method: Directive 67/548/EEC, Annex V,
B.32. Result: did not display carcinogenic properties GLP: No data available, Carcinogenicity -
Assessment : Animal testing did not show any carcinogenic effects.
Reproductive toxicity Effects on fertility : Test Type: Two-generation study Species: rat, male and female Application
Route: Inhalation Dose: 0, 25, 100 and 500 ppm Duration of Single Treatment: 6 h Frequency of
Treatment: 7 days/week General Toxicity - Parent: NOAEC: > 500 ppm General Toxicity F1:
NOAEC: > 500 ppm Early Embryonic Development: NOAEC: > 500 ppm Result: No reproductive
effects. Effects on fetal development : Species: rat Application Route: Inhalation Dose: 0, 100,
500, 1000 or 2000 ppm Duration of Single Treatment: 14 d Frequency of Treatment: 6 hr/day
General Toxicity Maternal: NOAEC: 500 ppm Teratogenicity: NOAEC: > 2,000 Developmental
Toxicity: NOAEC: 100 ppm Result: No teratogenic effects., Developmental toxicity occurred at
maternal toxicity dose levels Reproductive toxicity - Assessment : Animal testing did not show
any effects on fertility. Damage to fetus not classifiable
STOT - single exposure No data available.
STOT - repeated
exposure
Target Organs: Liver, Kidney, Central nervous system Assessment: May cause damage to
organs through prolonged or repeated exposure.
Repeated dose toxicity Species: rat, male and female NOAEL: 250 mg/kg Application Route: Oral Exposure time: 103
wk Number of exposures: 5 d/wk Dose: 0, 250 or 500 mg/kg Assessment: The substance or
mixture is classified as specific target organ toxicant, repeated exposure, category 2.
Aspiration Toxicity May be fatal if swallowed and enters airways.
12. ECOLOGICAL INFORMATION
Aliphatic Solvent(64742-47-8)
LC50 (Rainbow trout)
Toxicity to fish
2.9 mg/l - 96 h, Oncorhynchus mykiss (rainbow trout)
EC50 (Daphnia Magna)
Tocicity to daphnia and
other aquatic
invertebrates
1.4 mg/l - 48 h, - Daphnia magna (Water flea), (OECD Test Guideline 202)
Persistence and
degradability
No data available.
Bioaccumulative
potential
No data available.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 10 of 15
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted.
Other adverse effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Toxic to aquatic life. No data available.
Aluminum(7429-90-5)
LD50 Toxicity to fish -
Oncorhynchus mykiss
0.12 mg/l - 96 h, Oncorhynchus mykiss, mortality LOEC - Ctenopharyngodon idella - 0.1 mg/l -
96 h
Persistence and
degradability
Biodegradability - Result - Readily biodegradable
Bioaccumulative
potential
Bioaccumulation - Salvelinus fontinalis - 56 d, 268 ug/l
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects An environmental hazard cannot not be excluded in the event of unprofessional handling or
disposal.
Cumene(98-82-8)
LC50 - Oncorhynchus
mykiss (rainbow trout)
Toxicity to fish
4.8 mg/l - 96 h, Oncorhynchus mykiss (rainbow trout)
Persistence and
degradability
Biodegradability Result: - According to the results of tests of biodegradability this product is not
readily biodegradable.
Bioaccumulative
potential
No data available.
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Toxic to aquatic life with long lasting effects.
EC50 - Daphnia (water
flea) - Toxicity to
daphnia and other
aquatic invertebrates
2.14 mg/l - 48 h (OECD Test Guideline 202), Daphnia (water flea)
EC50 -
Pseudoskirchneriella
subcapitata (green
algae) - Toxicity to
algae
2.60 mg/l - 72 h, Pseudoskirchneriella subcapitata (green algae)
Dipropylene Glycol Methyl Ether(34590-94-8)
LC 50 Toxicity to Fish 10,000 mg/l , 96 h (Pimephales promelas)
EC 50 Toxicity to
Daphnia and other
aquatic invertebrates
1,919 mg/l , 48 h (Daphnia Magna)
Persistence and
degradability
Biodegradability
Bioaccumulative
Potential
No Data Available
Mobility in Soil No Data Available
Results of PBT and
vPvB assessment
PBT vPvB assessment not available as chemical safety assessment not required / conducted
Other Adverse Effects No Data Available
Dipropylene Glycol n-Butyl Ether(29911-28-2)
LC50 - other fish -
Toxicity to fish
841 mg/l - 96 h, other fish
EC50 - Daphnia magna
(Water flea) - Toxicity
to daphnia and other
aquatic invertebrates
1,000 mg/l - 48 h, Daphnia magna (Water flea)
Persistence and
degradability
No data available.
Bioaccumulative
potential
No data available.
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted.
Other adverse effects No data available.
Ethylene glycol mono butyl ether(111-76-2)
LC50 (fish) 1,474 mg/l Pimephales promelas (Fathead minnow))Exposure time: 96 h Test Type: static test,
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 11 of 15
Method: OECD Test Guideline 203 GLP: no
EC50 (Daphnia) 1,800 mg/l(48 h; Daphnia magna (Water flea)): Exposure time: 48 h Test Type: static test
Method: OECD Test Guideline 202 GLP: no
EC50 (Algae) 911 mg/l End point: Biomass Exposure time: 72 h Test Type: static test Analytical monitoring:
yes Method: OECD Test Guideline 201 GLP: no
Persistence and
degradability
aerobic Inoculum: Activated sludge, domestic, adaption not specified, Result: Readily
biodegradable. Biodegradation: 90.4 % Exposure time: 28 d Method: OECD Test Guideline 301B
GLP: no
Bioaccumulative
potential
Partition coefficient: n-octanol/water: log Pow: 0.83
Mobility in soil No data available
Other adverse effects No data available
Product Regulation: 40CFR Protection of Environment, Part 82 Protection of Stratospheric Ozone - CAA
Section 602 Class 1 Substances:
Isobutyl Alcohol(78-83-1)
LC50 - Fish - Acute >100 mg/l (96 h) The product has not been tested. The statement has been derived from
properties of the individual components.
Chronic No data available.
EC50 - Daphnia - Acute >100 mg/l ( 48 h) The product has not been tested. The statement has been derived from
properties of the individual components.
Chronic No data available.
EC50 - Aquatic Plants >100 mg/l (72 h) The product has not been tested. The statement has been derived from
properties of the individual components.
Microorganisms Toxicity to microorganisms: bacteria EC10 (17 h): >750 mg/l. The product has not been tested.
The statement has been derived from properties of the individual components.
Degradability /
Persistence; Biological
/ A biological
Degradation
Evaluation: Not readily biodegradable (by OECD criteria).
Naphtha, petroleum, hydrodesulfurized heavy(64742-82-1)
LC50 - other fish -
Toxicity to fish
<100 mg/l - 96h - other fish.
Persistence and
degradability
Biodegradability aerobic - Exposure time 28 d Result: 77.05 % - Readily biodegradable.
Bioaccumulative
potential
No data available.
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted.
Other adverse effects No data available.
Phenylethane(100-41-4)
LC50 (Oncorhynchus
mykiss (rainbow
trout))
4.2 mg/l Exposure time: 96 h Test Type: semi-static test
EC50 (Daphnia magna
(Water flea))
1.8 mg/l Exposure time: 48 h Test Type: static test
EC50
(Pseudoskirchneriella
subcapitata)
5.4 mg/l Exposure time: 72 h Test Type: static test Analytical monitoring: yes Method: Static
GLP: yes
Toxicity to daphnia and
other aquatic
invertebrates (Chronic
toxicity)
(Daphnia): 3.6 mg/l Toxicity to bacteria : GLP: Remarks: No data available Ecotoxicology
Assessment Chronic aquatic toxicity : Harmful to aquatic life with long lasting effects.
Persistence and
degradability
Biodegradability : Inoculum: activated sludge Concentration: 22 mg/l Result: Readily
biodegradable. Biodegradation: 70 % Exposure time: 28 d GLP: yes
Bioaccumulative
potential
Partition coefficient: noctanol/water : log Pow: 2.92
Mobility in soil No data available.
Other adverse effects Results of PBT and vPvB assessment : This substance is not considered to be persistent,
bioaccumulating nor toxic (PBT). This substance is not considered to be very persistent nor very
bioaccumulating (vPvB).
Pseudocumene(95-63-6)
LC50 - Pimephales
promelas (fathead
minnow) - Toxicity to
fish
7.72 mg/l - 96.0 h, Pimephales promelas (fathead minnow)
EC50 - Daphnia magna
(Water flea) - Toxicity
to daphnia and other
3.6 mg/l - 48 h (OECD Test Guideline 202), Daphnia magna (Water flea)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 12 of 15
aquatic invertebrates
static test
Persistence and
degradability
No data available.
Bioaccumulative
potential
No data available.
Mobility in soil No data available.
Results of PBT and
vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Toxic to aquatic life with long lasting effects.
Titanium Dioxide(13463-67-7)
LC50 fish Fathead minnow 96 h >1000 mg/l
Xylene(1330-20-7)
LC50 (Oncorhynchus
mykiss (rainbow
trout))
2.6 mg/l Exposure time: 96 h Test substance: Information given is based on data obtained from
similar substances. Method: OECD Test Guideline 203 GLP: No data available
IC50 (Daphnia magna
(Water flea))
1 mg/l Exposure time: 24 h Test Type: static test substance: Information given is based on data
obtained from similar substances. Method: OECD Test Guideline 202 GLP
EC50
(Pseudoskirchneriella
subcapitata)
4.36 mg/l End point: Growth rate Exposure time: 73 h Test Type: static test Analytical
monitoring: yes
Persistence and
degradability
Biodegradability : Inoculum: activated sludge Result: Readily biodegradable. Biodegradation: 72
% Exposure time: 20 d
Bioaccumulative
potential
Partition coefficient: noctanol/water : log Pow: 2.77 - 3.15
Mobility in soil No data available.
13. DISPOSAL CONSIDERATIONS
WASTE TREATMENT METHODS
GENERAL INFORMATION : No data available.
DISPOSAL METHOD: Recycle whenever possible or destroy by liquid incineration in accordance with applicable
regulations. Contaminated absorbent should be incinerated or sent to an approved landfill in accordance with Local, State,
and Federal Regulations.
14. TRANSPORT INFORMATION
*CHECK WITH YOUR CARRIER FOR ADDITIONAL RESTRICTIONS THAT MAY APPLY.
USDOT GROUND
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME (DOT) : Not Regulated By D.O.T., 49 CFR
HAZARDS CLASS : Not Applicable
UN/NA NUMBER : Not Applicable
PACKING GROUP : Not Applicable
EMERGENCY RESPONSE GUIDE (ERG) : Not Applicable
IATA (AIR)
DOT (INTERNATIONAL AIR TRANSPORTATION ASSOCIATION)
PROPER SHIPPING NAME : IATA, Not Applicable
HAZARDS CLASS : Not Applicable
UN/NA NUMBER : Not Applicable
PACKING GROUP : Not Applicable
EMERGENCY RESPONSE GUIDE (ERG) : Not Applicable
IMDG (OCEAN)
PROPER SHIPPING NAME : IMDG, Not Applicable
HAZARDS CLASS : Not Applicable
UN/NA NUMBER : Not Applicable
PACKING GROUP : Not Applicable
EMERGENCY RESPONSE GUIDE (ERG) : Not Applicable
MARINE POLLUTANT : No
SPECIAL PRECAUTIONS : P403 Store in a well-ventilated place. P235 Keep cool.
15. REGULATORY INFORMATION
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 13 of 15
US FEDERAL REGULATIONS
All ingredients in Section #3 are TSCA (Toxic Substance Control Act) listed.
OSHA HAZARDS : Flammable liquid, Moderate skin irritant, Moderate eye irritant, Carcinogen.
EPCRA - Emergency
CERCLA REPORTABLE QUANTITY
This product contains: Chemical CAS#
Ethylene glycol mono butyl ether 111-76-2
Isobutyl Alcohol 78-83-1
Xylene 1330-20-7
Phenylethane 100-41-4
SARA 304 Extremely Hazardous Substances Reportable Quantity : This material does not contain any components
with a section 304 EHS RQ.
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
SARA 311/312 Hazards : Fire Hazard, Acute Health Hazard, Chronic Health Hazard
SARA 313 :
This product contains: Chemical CAS#
Titanium Dioxide 13463-67-7
Ethylene glycol mono butyl ether 111-76-2
Amorphous Silica 7631-86-9
Aluminum 7429-90-5
CLEAN AIR ACT :
This product contains: Chemical CAS#
Xylene 1330-20-7
Cumene 98-82-8
Phenylethane 100-41-4
INTERNATIONAL REGULATIONS
CLASSIFICATION ACCORDING TO REGULATION (EC) No. 1272/2008 (CLP) :
Acute Tox. Cat. 4; H302
Skin Sens. Cat. 1; H317
Eye Irrit. Cat.2; H319
Acute Tox. Cat. 4; H332
STOT SE Cat. 3; H336
STOT RE Cat. 1; H372
NATIONAL REGULATIONS
This product contains: Chemical CAS#
~Titanium Dioxide 13463-67-7
IARC KEY
~ Indicates a chemical listed by IARC as a possible carcinogen.
^ Indicates a chemical listed by IARC as a carcinogen.
STATE REGULATIONS
CALIFORNIA PROPOSITION 65
This product contains: Chemical CAS#
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 14 of 15
PROPOSTION 65 KEY
* WARNING Cancer – www P65Warnings.ca.gov
# WARNING Reproductive Harm – www P65Warnings.ca.gov
+ WARNING Cancer and Reproductive Harm – www P65Warnings.ca.gov
Massachusetts Right to Know
This product contains Chemical CAS#
Ethylene glycol mono butyl ether 111-76-2
Aluminum 7429-90-5
Naphtha, petroleum,
hydrodesulfurized heavy
64742-82-1
Pseudocumene 95-63-6
Aliphatic Solvent 64742-47-8
Isobutyl Alcohol 78-83-1
Dipropylene Glycol Methyl Ether 34590-94-8
Xylene 1330-20-7
Cumene 98-82-8
Phenylethane 100-41-4
Pennsylvania Right to Know
This product contains Chemical CAS#
Titanium Dioxide 13463-67-7
Water 7732-18-5
Ethylene glycol mono butyl ether 111-76-2
Amorphous Silica 7631-86-9
Aluminum Hydroxide 21645-51-2
Aluminum 7429-90-5
Dipropylene Glycol n-Butyl Ether 29911-28-2
Naphtha, petroleum,
hydrodesulfurized heavy
64742-82-1
Pseudocumene 95-63-6
Aliphatic Solvent 64742-47-8
Isobutyl Alcohol 78-83-1
Dipropylene Glycol Methyl Ether 34590-94-8
Xylene 1330-20-7
Cumene 98-82-8
Phenylethane 100-41-4
New Jersey Right to Know
This product contains Chemical CAS#
Titanium Dioxide 13463-67-7
Water 7732-18-5
Ethylene glycol mono butyl ether 111-76-2
Amorphous Silica 7631-86-9
*Aliphatic Solvent 64742-47-8
*Cumene 98-82-8
*Phenylethane 100-41-4
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
Page 15 of 15
Aluminum Hydroxide 21645-51-2
Aluminum 7429-90-5
Dipropylene Glycol n-Butyl Ether 29911-28-2
Naphtha, petroleum,
hydrodesulfurized heavy
64742-82-1
Pseudocumene 95-63-6
Aliphatic Solvent 64742-47-8
Isobutyl Alcohol 78-83-1
Dipropylene Glycol Methyl Ether 34590-94-8
Xylene 1330-20-7
Cumene 98-82-8
Phenylethane 100-41-4
16. OTHER INFORMATION
Other Product Information
% Volatile by Volume: 61.65 % Volatile by Weight: 40.10
% Solids by volume: 38.35 % Solids by Weight: 59.90
% Exempt by Volume: 51.99 % Exempt by Weight: 34.39
VOC CONTENT: Excluding Exempt VOC: 179
Including Exempt VOC: 83
HMIS RATING
Health : 1*
Flammability : 1
Reactivity : 0
Personal Protection : F
MANUFACTURER DISCLAIMER : The information contained in this Safety Data Sheet is considered to be true and
accurate. Cardinal Industrial Finishes makes no warranties, expressed or implied, as to the accuracy and adequacy of this
information. This data is offered solely for the user's consideration, investigation and verification.
NFPA CODES
1
0 1
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Decor Basecoat 404-55 Technical Datasheet 404-55
Revision:8
Date of Issue:2018-03-15
Page:1/4
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Characteristics
Polyurethane-based two-component paint
For surfaces with coloured and visual effects
Low heat release
Fulfils the FST properties of the aerospace industry with regard to:
Flammability
FAR/JAR/CS § 25.853 (a) and App. F, Part I § (a) (1) (I)
Smoke Gas Density
FAR/JAR/CS § 25.853 (d) and App. F, Part V § (b)
Toxicity
ABD 0031 and AITM 3.0005
Heat Release
FAR/JAR/CS § 25.853 (d) and App. F, Part IV § (h)
Range of Application
For outstanding effects on high-quality utility goods and furnishings of cabin interiors in
the aerospace industry, in combination with ALEXIT clearcoats (e.g. ALEXIT
FST-Clearcoat 404-15).
Qualified acc. to:
AIMS 04-08-004CD(Airbus) with ALEXIT Verdünner / Thinner 62
BMS 10-121B Type III (Boeing) with ALEXIT Verdünner / Thinner 62
Color and Gloss
Color:transparent with coloured effect pigments
Theoretical Coverage
Area Quantity Film thickness
180 m²1 kg 1 µm
18 m²1 kg 10 µm
275 ft²1 gal 1 mil
Recommended dry film thickness: 10 - 15 µm (0.4 - 0.6 mil)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Decor Basecoat 404-55 Technical Datasheet 404-55
Revision:8
Date of Issue:2018-03-15
Page:2/4
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Surface Pre-treatment
May be applied in most cases directly on to the clean base coat layer (e.g. ALEXIT
FST Strukturlack 404-12).
The recoating time of the paint layer underneath must be observed. For further details
please refer to the latest version of the relevant technical datasheet.
For further processing details please contact Mankiewicz before starting the first
application.
Trade Names and Packaging
Material Trade name Container size [net]
Base material ALEXIT FST-Decor Basecoat 404-55 10 kg
US gal, US quart
Hardener ALEXIT Härter/Hardener 450 1 kg
US quart, US pint
Thinner ALEXIT Verdünner/Thinner 62 5 kg
US quart, US pint
Thinner ALEXIT Verdünner / Thinner 901-45 5 kg
US quart, US pint
Special packaging sizes available upon request.
Mixing
Base Hardener Thinner
Trade
name
ALEXIT FST-Decor
Basecoat 404-55
ALEXIT
Härter/Hardener
450
ALEXIT
Verdünner/Thinner 62
ALEXIT
Verdünner/Thinner
901-45
By
weight
10 1 see "Application"
NOTE: Calculation of thinner amount based on mixture of base component and hardener.
Recommendation
ALEXIT Verdünner / Thinner 62 Standard
ALEXIT Verdünner / Thinner
901-45
for higher temperatures and / or large
components
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Decor Basecoat 404-55 Technical Datasheet 404-55
Revision:8
Date of Issue:2018-03-15
Page:3/4
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Pot Life
approx. 10 h at 20 °C (68 °F)
Application
Compressed air spraying
Thinner addition 50 - 100 %
Flow time (DIN EN ISO 2431 - 4 mm)27 - 33 s
Nozzle size 1.2 - 1.5 mm
Atomizing pressure 1.5 - 4.0 bar
Please observe the technical recommendations of the equipment manufacturers.
The number of cross-coats to be applied depends on the desired effect.
Flow time of the ready-to-use-mixture measured with 50% ALEXIT Verdünner / Thinner
62.
Drying
20 °C (68 °F)
drying
60 °C (140 °F)
drying
80 °C (176 °F)
drying
Flash-off time at 20 °C
(68 °F)
-30 min 30 min
Recoatable -1 h 30 min
Recoating window
(without sanding)
3 h to 72 h After cool down up
to 48 hours
After cool down up
to 48 hours
The temperature specified is the object temperature.
If the recoating time is exceeded, the surface cannot be reactivated by sanding.
Shelf Life
Material Shelf life
Base material 18 months
Hardener 12 months
Thinner 24 months
The storage data specified relates to unopened original containers.
The recommended temperature during storage and transport is
5 – 38°C (40 - 100 °F).
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Decor Basecoat 404-55 Technical Datasheet 404-55
Revision:8
Date of Issue:2018-03-15
Page:4/4
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Additional Details
The substrate and the film thicknesses applied have an impact on the compliance with
the requirements of the aerospace industry.
The information contained in this document is based on our current state of research and development. Revisal by the user with regard to the intended purpose is
necessary due to the variety of processing options and fields of application – please refer to the General Terms and Conditions of Sale.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 1/19
SECTION 1. IDENTIFICATION
Product name
: ALEXIT-FST-Decor-Basecoat 404-55 A104 White Pearl
BAC94548 / BAC70957 Build up Semigloss
Product code
: 40455.A104.U
Manufacturer or supplier's details
Manufacturer, importer,
supplier
: Mankiewicz Coatings L.L.C
Address
: 1200 Charleston Regional Parkway
Charleston, South Carolina 29492
USA
Telephone
: +1 (843) 6547755
Telefax
: +1 (843) 6547759
E-mail address
: sdb_info@umco.de
Emergency telephone
: CHEMTREC +1 (800) 4249300 or + (703) 5273887
Recommended use of the chemical and restrictions on use
Recommended use
: Industrial serial painting
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids
: Category 3
Skin irritation
: Category 2
Eye irritation
: Category 2A
Skin sensitization
: Category 1
Carcinogenicity
: Category 2
Specific target organ toxicity
- single exposure
: Category 3 (Central nervous system)
Specific target organ toxicity
- repeated exposure
: Category 2
GHS label elements
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 2/19
Hazard pictograms
:
Signal Word
: Warning
Hazard Statements
: H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or
repeated exposure.
Precautionary Statements
: Prevention:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read
and understood.
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing must not be allowed out of
the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P304 + P340 + P312 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/
doctor if you feel unwell.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/
attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/
attention.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 3/19
tion.
P362 Take off contaminated clothing and wash before reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P233 Store in a well-ventilated place. Keep container
tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
: Mixture of synthetic resins, organic solvents and pigments
Components
Chemical name CAS-No. Concentration (% w/w)
xylenes 1330-20-7 >= 12.5 - < 20
2-methoxy-1-methylethyl acetate 108-65-6 >= 12.5 - < 20
ethylbenzene 100-41-4 >= 12.5 - < 20
n-butyl acetate 123-86-4 >= 5 - < 12.5
Reaction mass of Bis(1,2,2,6,6-
pentamethyl-4-piperidyl) sebacate
and Methyl 1,2,2,6,6-pentamethyl-4-
piperidyl sebacate
41556-26-7
82919-37-7
>= 0.5 - < 1
reaction mass of a-3-(3-(2H-
benzotriazol-2-yl)-5-tert-butyl-4-
hydroxyphenyl)propionyl-w-
hydroxypoly(oxyethylene) and a-3-(3-
(2H-benzotriazol-2-yl)-5-tert-butyl-4-
hydroxyphenyl)propionyl-w-3-(3-(2H-
benzotriazol-2-yl)-5-tert-butyl-4-
hydroxy-
phenyl)propionyloxypoly(oxyethylene)
104810-47-1
104810-48-2
>= 0.25 - < 0.5
These contain:
2-methoxypropyl acetate 70657-70-4 > 0 - <= 0.1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 4/19
General advice
: In all cases of doubt, or when sickness symptoms persist,
seek medical attention.
Never give anything by mouth to an unconscious person.
If inhaled
: Remove to fresh air, keep patient warm and at rest.
Irregular breathing/no breathing: artificial respiration.
If unconscious place in recovery position and seek medical
advice.
In case of skin contact
: Take off all contaminated clothing immediately.
Wash skin thoroughly with soap and water or use recognised
skin cleanser.
Do NOT use solvents or thinners !
In case of eye contact
: Remove contact lenses, irrigate copiously with clean, fresh
water for at least 10 minutes, holding the eyelids apart and
seek medical advice.
If swallowed
: Do NOT induce vomiting.
If accidentally swallowed obtain immediate medical attention.
Never give anything by mouth to an unconscious person.
Keep at rest.
Most important symptoms
and effects, both acute and
delayed
: Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
May cause drowsiness or dizziness.
Suspected of causing cancer.
May cause damage to organs through prolonged or repeated
exposure.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
: Alcohol resistant foam, CO2, powders
Unsuitable extinguishing
media
: High volume water jet
Specific hazards during fire
fighting
: Fire will produce dense black smoke. Exposure to
decomposition products may cause a health hazard.
Further information : Cool endangered containers with water in case of fire.
DO NOT ALLOW RUN-OFF FROM FIRE FIGHTING TO
ENTER DRAINS OR WATER COURSES!!
Special protective equipment
for fire-fighters
: As in any fire, wear self-contained breathing apparatus
pressure - demand, MSHA / NIOSH (approved or equivalent)
and full protective gear.
SECTION 6. ACCIDENTAL RELEASE MEASURES
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 5/19
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Exclude sources of ignition and ventilate the area.
Do not inhale vapors.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
: Do not let product enter drains.
If the product contaminates lakes, rivers or sewage, inform
appropriate authorities in accordance with local regulations.
Methods and materials for
containment and cleaning up
: Contain and collect spillage with non-combustible absorbent
materials, e.g. sand, earth, vermiculite, diatomaceous earth
and place in container for disposal according to local
regulations (see section 13).
Clean preferably with a detergent; avoid use of solvents.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: The product should only be used in areas from which all
naked lights and other sources of ignition have been
excluded.
Preparation may charge electrostatically: always use earthing
leads whentransferring from one container to another.
Operators should wear anti-static footwear and clothing. No
sparking tools should be used.
Vapors are heavier than air and may spread along floors.
Vapors may form explosive mixtures with air.
Advice on safe handling
: Prevent the creation of flammable or explosive concentrations
of vapor in air and avoid vapor concentrations higher than the
occupational exposure limits.
Comply with the health and safety at work laws.
Smoking, eating and drinking should be prohibited in the
application area.
Observe specific national regulations for handling and use of
paints.
Conditions for safe storage
: Electrical equipment should be protected to the appropriate
standard. Floors should be of the conducting type.
Keep container tightly closed. Never use pressure to empty:
container isnot a pressure vessel. No smoking. Prevent
unauthorized access.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Further information on stor-
age conditions
: Always keep in containers of same material as the original
one. See also instructions on the label. Avoid heating and
direct sunlight.
Keep container dry in a cool, well-ventilated place.
Materials to avoid
: Keep away from oxidizing agents and strongly acid or alkaline
materials.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 6/19
Recommended storage tem-
perature
: 40 - 100 °F / 4 - 38 °C
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
xylenes 1330-20-7 VLE-PPT 100 ppm NOM-010-
STPS-2014
VLE-CT 150 ppm NOM-010-
STPS-2014
TWA 100 ppm
435 mg/m3
OSHA Z-1
TWA 100 ppm ACGIH
STEL 150 ppm ACGIH
STEL 150 ppm
651 mg/m3
CA AB OEL
TWA 100 ppm
434 mg/m3
CA AB OEL
TWAEV 100 ppm
434 mg/m3
CA QC OEL
STEV 150 ppm
651 mg/m3
CA QC OEL
TWA 100 ppm CA BC OEL
STEL 150 ppm CA BC OEL
STEL 150 ppm
655 mg/m3
OSHA P0
TWA 100 ppm
435 mg/m3
OSHA P0
2-methoxy-1-methylethyl
acetate
108-65-6 TWA 50 ppm CA BC OEL
STEL 75 ppm CA BC OEL
TWA 50 ppm
270 mg/m3
CA ON OEL
TWA 50 ppm US WEEL
ethylbenzene 100-41-4 TWA 20 ppm CR OEL
Further information: Confirmed animal carcinogen, Substances for
which there is a Biological Exposure Index or Indices (see BEI
section), Visual impairment, Upper Respiratory Tract irritation,
Kidney damage (nephropathy)
TWA 100 ppm
434 mg/m3
CA AB OEL
STEL 125 ppm
543 mg/m3
CA AB OEL
TWA 20 ppm CA BC OEL
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 7/19
STEV 125 ppm
543 mg/m3
CA QC OEL
TWAEV 100 ppm
434 mg/m3
CA QC OEL
VLE-PPT 20 ppm NOM-010-
STPS-2014
TWA 20 ppm ACGIH
TWA 100 ppm
435 mg/m3
NIOSH REL
ST 125 ppm
545 mg/m3
NIOSH REL
TWA 100 ppm
435 mg/m3
OSHA Z-1
TWA 100 ppm
435 mg/m3
OSHA P0
STEL 125 ppm
545 mg/m3
OSHA P0
n-butyl acetate 123-86-4 TWA 50 ppm CR OEL
Further information: Eye irritation, Upper Respiratory Tract irrita-
tion
STEL 150 ppm CR OEL
Further information: Eye irritation, Upper Respiratory Tract irrita-
tion
TWA 150 ppm
713 mg/m3
CA AB OEL
STEL 200 ppm
950 mg/m3
CA AB OEL
TWA 20 ppm CA BC OEL
TWAEV 150 ppm
713 mg/m3
CA QC OEL
STEV 200 ppm
950 mg/m3
CA QC OEL
VLE-PPT 150 ppm NOM-010-
STPS-2014
VLE-CT 200 ppm NOM-010-
STPS-2014
TWA 150 ppm
710 mg/m3
NIOSH REL
ST 200 ppm
950 mg/m3
NIOSH REL
TWA 150 ppm
710 mg/m3
OSHA Z-1
TWA 150 ppm
710 mg/m3
OSHA P0
STEL 200 ppm
950 mg/m3
OSHA P0
TWA 50 ppm ACGIH
STEL 150 ppm ACGIH
2-methoxypropyl acetate 70657-70-4 TWA 20 ppm CA BC OEL
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 8/19
STEL 40 ppm CA BC OEL
Biological occupational exposure limits
Components CAS-No. Control
parameters
Biological
specimen
Sam-
pling
time
Permissible
concentra-
tion
Basis
xylenes 1330-20-7 Methyl-
hippuric
acids
Urine End of
shift (As
soon as
possible
after
exposure
ceases)
1.5 g/g cre-
atinine
ACGIH
BEI
Methyl-
hippuric
acid
Urine End of
shift
1.5 g/g cre-
atinine
MX BEI
Methyl-
hippuric
acids
Urine End of
shift
1.5 g/g cre-
atinine
CR BEI
ethylbenzene 100-41-4 Sum of
Mandelic
acid plus
phenylgly-
oxylic acid
Urine End of
shift at
end of
work-
week
0.7 g/g cre-
atinine
MX BEI
Sum of
mandelic
acid and
phenyl gly-
oxylic acid
Urine End of
shift (As
soon as
possible
after
exposure
ceases)
0.15 g/g
creatinine
ACGIH
BEI
Sum of
mandelic
acid and
phenyl gly-
oxylic acid
Urine End of
shift
0.15 g/g
creatinine
CR BEI
Engineering measures : Provide adequate ventilation. Where reasonably practicable
this should be achieved by the use of local exhaust
ventilation and good general extraction. If these are not
sufficient to maintain aerosol- and solvent vapors
concentration below the OEL, suitable respiratory protection
must be worn.
Personal protective equipment
Respiratory protection
: If workers are exposed to concentrations above the exposure
limit they must use appropriate, certified respirators.
Use MSHA/NIOSH approved respirator if concentration
exceeds recommended exposure levels.
Dry grinding, torch cutting and/or welding however can
produce hazardous dust and/or vapor.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 9/19
If possible, machine employing a wet medium.
Where practicable, install exhaust hoods to improve capture
of vapors and fumes and avoid exposition; otherwise wear
respiratory protection equipment.
Hand protection
Remarks
: Glove permeation data does not exist for this material.
The following glove(s) should be used for splash protection
only:
Appropriate material: nitrile
Eye protection
: Use safety glasses or face shield (ANSI Z87.1 or approved
equivalent).
Skin and body protection
: Personal should wear protective clothing as necessary to
prevent skin contact. All parts of the body should be washed
after contact.
Protective measures
: Do not eat or drink during work - no smoking.
Avoid product contact with skin, eyes and clothing.
Avoid the inhalation of dust from sanding, particulates and
spray mist arising from the application of this preparation.
When operators, whether spraying or not, have to work inside
the spray booth, ventilation is unlikely to be sufficient to
control particulates and solvent vapor in all cases. In such
circumstances they should wear a compressed air-fed
respirator during the spraying process until such time as the
particulates and solvent vapor concentration has fallen below
the exposure limits.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
: liquid
Color
: according product name
Odor
: characteristic
Boiling point/boiling range
: ca. 248 °F / 120 °C
Flash point
: 82 °F / 28 °C
Method: ISO 13736
Upper explosion limit / Upper : 10 %(V)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 10/19
flammability limit
Lower explosion limit / Lower
flammability limit
: 1 %(V)
Vapor pressure
: 100 hPa (122 °F / 50 °C)
Density
: 8 lb/gal (1 g/cm3)
(68 °F / 20 °C)
Solubility(ies)
Water solubility
: insoluble
Autoignition temperature
: > 752 °F / > 400 °C
Viscosity
Flow time
: 61 - 90 s
Cross section: 4 mm
Method: DIN 53211
41 s
Cross section: 6 mm
Method: ISO 2431
SECTION 10. STABILITY AND REACTIVITY
Reactivity
: No decomposition if stored and applied as directed.
Chemical stability
: Stable under normal conditions.
Possibility of hazardous reac-
tions
: No dangerous reaction known under conditions of normal use.
There are no data available on the preparation itself.
Conditions to avoid
: Stable under recommended storage and handling conditions
(See section 7).
Incompatible materials
: Keep away from oxidizing agents, strongly alkaline and
strongly acidic materials in order to avoid exothermic
reactions.
Hazardous decomposition
products
: When exposed to high temperatures may produce hazardous
decomposition products such as carbon monoxide and diox-
ide, smoke, oxides of nitrogen.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Not classified based on available information.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 11/19
Product:
Acute oral toxicity
: Acute toxicity estimate: > 5,000 mg/kg
Method: Calculation method
Acute inhalation toxicity
: Acute toxicity estimate: 36.86 mg/l
Exposure time: 4 h
Test atmosphere: vapor
Method: Calculation method
Acute dermal toxicity
: Acute toxicity estimate: > 5,000 mg/kg
Method: Calculation method
Components:
xylenes:
Acute oral toxicity
: LD50 Oral (Rat): 4,300 mg/kg
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
May cause an allergic skin reaction.
Respiratory sensitization
Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Suspected of causing cancer.
IARC Group 2B: Possibly carcinogenic to humans
ethylbenzene 100-41-4
OSHA No component of this product present at levels greater than or equal to 0.1% is
on OSHA’s list of regulated carcinogens.
NTP No ingredient of this product present at levels greater than or equal to 0.1% is
identified as a known or anticipated carcinogen by NTP.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
May cause drowsiness or dizziness.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 12/19
STOT-repeated exposure
May cause damage to organs through prolonged or repeated exposure.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks : Exposure of vapor concentration in excess of the stated OEL's
may result in adverse health effects such as mucous mem-
brane and respiratory system irritation and adverse effects on
kidney, liver and central nervous system. Symptoms and signs
include headache, dizziness, fatigue muscular weakness,
drowsiness and in extrem cases, loss of consciousness.
Repeated or prolonged contact with the preparation may
cause removal of natural fat from the skin resulting in non-
allergic contact dermatitis and absorption through the skin.
The liquid splashed in the eyes may cause irritation and re-
versible damage.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
Product:
Ecotoxicology Assessment
Acute aquatic toxicity
: There are no data available on the preparation itself.
Components:
Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-
pentamethyl-4-piperidyl sebacate:
Toxicity to fish
: LC50 (Lepomis macrochirus (Bluegill sunfish)): 0.97 mg/l
Exposure time: 96 h
Method: OECD Test Guideline 203
Toxicity to daphnia and other
aquatic invertebrates
: EC50 (Daphnia magna (Water flea)): 20 mg/l
Exposure time: 48 h
Method: OECD Test Guideline 202
Toxicity to algae/aquatic
plants
: EC50 (Desmodesmus subspicatus (green algae)): 1.68 mg/l
Exposure time: 72 h
Method: OECD Test Guideline 201
Remarks: The product has low solubility in the test medium.
An aqueous dispersion was tested.
Toxicity to daphnia and other
aquatic invertebrates (Chron-
: NOEC (Daphnia magna (Water flea)): 1 mg/l
Exposure time: 21 d
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 13/19
ic toxicity)
Method: OECD Test Guideline 211
Remarks: The product has low solubility in the test medium.
An aqueous dispersion was tested.
Persistence and degradability
Product:
Biodegradability
: Remarks: There are no data available on the preparation it-
self.
Bioaccumulative potential
Product:
Bioaccumulation
: Remarks: There are no data available on the preparation it-
self.
Mobility in soil
Product:
Mobility
: Remarks: There are no data available on the preparation it-
self.
Other adverse effects
Product:
Ozone-Depletion Potential
: Regulation: 40 CFR Protection of Environment; Part 82 Pro-
tection of Stratospheric Ozone - CAA Section 602 Class I
Substances
Remarks: This product neither contains, nor was manufac-
tured with a Class I or Class II ODS as defined by the U.S.
Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
Additional ecological infor-
mation
: There are no data available on the preparation itself.
The product should not be allowed to enter drains or water
courses.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Dispose of in accordance with local regulations.
SECTION 14. TRANSPORT INFORMATION
International Regulations
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 14/19
IATA-DGR
UN/ID No. : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : 3
EmS Code : F-E, S-E
Marine pollutant : no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation
49 CFR
UN/ID/NA number : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : FLAMMABLE LIQUID
Marine pollutant : no
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely
based upon the properties of the unpackaged material as it is described within this Safety Data
Sheet. Transportation classifications may vary by mode of transportation, package sizes, and
variations in regional or country regulations.
SECTION 15. REGULATORY INFORMATION
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Fire Hazard
Acute Health Hazard
Chronic Health Hazard
Flammable (gases, aerosols, liquids, or solids)
Respiratory or skin sensitization
Carcinogenicity
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 15/19
Specific target organ toxicity (single or repeated exposure)
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313
: The following components are subject to reporting levels
established by SARA Title III, Section 313:
xylenes
1330-20-7 >= 10 - < 20 %
ethylbenzene
100-41-4 >= 10 - < 20 %
Clean Air Act
This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by
the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
The following chemical(s) are listed as HAP under the U.S. Clean Air Act, Section 112 (40 CFR
61):
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for
Accidental Release Prevention (40 CFR 68.130, Subpart F).
The following chemical(s) are listed under the U.S. Clean Air Act Section 111 SOCMI Intermedi-
ate or Final VOC's (40 CFR 60.489):
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 5 - < 10 %
VOC content excluding
water
: 4.24 lb/gal (508 g/l)
For the calculation of VOC values in this section all su bstances
have been considered which fall under the definition of VOC
according to 40 CFR 51.100. Additionally, the calculation
complies with the requirements of SCAQMD Rule 1106.1,
amended February 12, 1999.
Clean Water Act
The following Hazardous Substances are listed under the U.S. CleanWater Act, Section 311, Ta-
ble 116.4A:
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 5 - < 10 %
The following Hazardous Chemicals are listed under the U.S. CleanWater Act, Section 311, Table
117.3:
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 5 - < 10 %
This product contains the following toxic pollutants listed under the U.S. Clean Water Act Section
307
ethylbenzene 100-41-4 >= 10 - < 20 %
This product contains the following priority pollutants related to the U.S. Clean Water Act:
ethylbenzene 100-41-4 >= 10 - < 20 %
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 16/19
US State Regulations
Massachusetts Right To Know
xylenes 1330-20-7
ethylbenzene 100-41-4
n-butyl acetate 123-86-4
Pennsylvania Right To Know
xylenes 1330-20-7
ethylbenzene 100-41-4
n-butyl acetate 123-86-4
2-methylpropan-1-ol 78-83-1
ethyl acetate 141-78-6
Maine Chemicals of High Concern
octamethylcyclotetrasiloxane 556-67-2
Vermont Chemicals of High Concern
ethylbenzene 100-41-4
octamethylcyclotetrasiloxane 556-67-2
Washington Chemicals of High Concern
ethylbenzene 100-41-4
California Prop. 65
WARNING: This product can expose you to chemicals including ethylbenzene, which is/are
known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov.
California List of Hazardous Substances
xylenes 1330-20-7
ethylbenzene 100-41-4
n-butyl acetate 123-86-4
California Permissible Exposure Limits for Chemical Contaminants
xylenes 1330-20-7
2-methoxy-1-methylethyl acetate 108-65-6
ethylbenzene 100-41-4
n-butyl acetate 123-86-4
The ingredients of this product are reported in the following inventories:
TSCA
: All substances listed as active on the TSCA inventory
SECTION 16. OTHER INFORMATION
Further information
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 17/19
NFPA 704: HMIS® IV:
HMIS® ratings are based on a 0-4 rating
scale, with 0 representing minimal haz-
ards or risks, and 4 representing signifi-
cant hazards or risks. The "*" represents
a chronic hazard, while the "/" represents
the absence of a chronic hazard.
Health
0=Slightly HazardousSlightly Hazardous
2=Hazardous
3=Extreme danger
4=Deadly
Flammability
0=Will not burn
2=Flashpoint below 200 F
3=Flashpoint below 100 F
4=Flashpoint below 73 F
Instability
0=Stable
1=Unstable if heated
2=Violent chemical reaction; water reactive
3=Shock or heat may detonate
4=May detonate
Special hazard
SA Simple Asphyxiant
ACID Acid
OX Oxidizer
W Water Reactive
CORR Corrosive
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
ACGIH BEI : ACGIH - Biological Exposure Indices (BEI)
CA AB OEL : Canada. Alberta, Occupational Health and Safety Code (table
2: OEL)
CA BC OEL : Canada. British Columbia OEL
CA ON OEL : Ontario Table of Occupational Exposure Limits made under
the Occupational Health and Safety Act.
CA QC OEL : Québec. Regulation respecting occupational health and safe-
ty, Schedule 1, Part 1: Permissible exposure values for air-
HEALTH
2
3
0
Flammability
Instability
Special hazard
FLAMMABILITY
PHYSICAL HAZARD
*
2
3
0
Health
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 18/19
borne contaminants
CR BEI : Maximum allowable occupational exposure limits in the work-
place - Table 3. Adopted Biological Exposure Indices
CR OEL : Costa Rica. Maximum allowable occupational exposure limits
in the workplace.
MX BEI : Official Mexican Norm NOM-047-SSA1-2011, Environmental
Health - Biological exposure indices for workers occupational-
ly exposed to chemical agents
NIOSH REL : USA. NIOSH Recommended Exposure Limits
NOM-010-STPS-2014 : Mexico. Norm NOM-010-STPS-2014 on Chemicals Polluting
the Work Environment - Identification, Assessment and Con-
trol - Appendix 1 Occupational Exposure Limits
OSHA P0 : USA. OSHA - TABLE Z-1 Limits for Air Contaminants -
1910.1000
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) - Table Z-1 Lim-
its for Air Contaminants
US WEEL : USA. Workplace Environmental Exposure Levels (WEEL)
ACGIH / TWA : 8-hour, time-weighted average
ACGIH / STEL : Short-term exposure limit
CA AB OEL / TWA : 8-hour Occupational exposure limit
CA AB OEL / STEL : 15-minute occupational exposure limit
CA BC OEL / TWA : 8-hour time weighted average
CA BC OEL / STEL : short-term exposure limit
CA ON OEL / TWA : Time-Weighted Average Limit (TWA)
CA QC OEL / TWAEV : Time-weighted average exposure value
CA QC OEL / STEV : Short-term exposure value
CR OEL / TWA : Time weighted average 8-hr value
CR OEL / STEL : Short term exposure limit
NIOSH REL / TWA : Time-weighted average concentration for up to a 10-hour
workday during a 40-hour workweek
NIOSH REL / ST : STEL - 15-minute TWA exposure that should not be exceeded
at any time during a workday
NOM-010-STPS-2014 / VLE-
PPT
: Time weighted average limit value
NOM-010-STPS-2014 / VLE-
CT
: Short term exposure limit value
OSHA P0 / TWA : 8-hour time weighted average
OSHA P0 / STEL : Short-term exposure limit
OSHA Z-1 / TWA : 8-hour time weighted average
US WEEL / TWA : 8-hr TWA
AICS - Australian Inventory of Chemical Substances; AIIC - Australian Inventory of Industrial
Chemicals; ASTM - American Society for the Testing of Materials; bw - Body weight; CERCLA -
Comprehensive Environmental Response, Compensation, and Liability Act; CMR - Carcinogen,
Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for Standardisation;
DOT - Department of Transportation; DSL - Domestic Substances List (Canada); ECx - Concen-
tration associated with x% response; EHS - Extremely Hazardous Substance; ELx - Loading rate
associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical
Substances (Japan); ErCx - Concentration associated with x% growth rate response; ERG -
Emergency Response Guide; GHS - Globally Harmonized System; GLP - Good Laboratory Prac-
tice; HMIS - Hazardous Materials Identification System; IARC - International Agency for Research
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Decor-Basecoat 404-55
Product No.: 40455.A104.U
Version
1.13
Revision Date:
10/01/2020
SDS Number:
F-40455A104U
Date of last issue: 09/12/2020
Date of first issue: 09/10/2015
Page 19/19
on Cancer; IATA - International Air Transport Association; IBC - International Code for the Con-
struction and Equipment of Ships carr ying Dangerous Chemicals in Bulk; IC50 - Half maximal in-
hibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Ex-
isting Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - In-
ternational Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - Interna-
tional Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal
Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Me-
dian Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
MSHA - Mine Safety and Health Administration; n.o.s. - Not Otherwise Specified; NFPA - National
Fire Protection Association; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL -
No Observed (Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NTP - Na-
tional Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization
for Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution
Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Invento-
ry of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relation-
ship; RCRA - Resource Conservation and Recovery Act; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals; RQ - Reportable Quantity; SADT - Self-Accelerating
Decomposition Temperature; SARA - Superfund Amendments and Reauthorization Act; SDS -
Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TSCA - Toxic Substances
Control Act (United States); UN - United Nations; UNRTDG - United Nations Recommendations
on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumulative
Revision Date : 10/01/2020
The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
US / Z8
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Topcoat 346-57 Technical Datasheet 346-57
Revision:13
Date of Issue:2019-05-23
Page:1/5
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Characteristics
Waterborne polyurethane-based two-component interior topcoat
Smooth and textured surfaces possible
Quick-drying
Low heat release
High resistance to abrasion
Dirt-repellent
High resistance to cleaning agents
VOC contents < 200 g/L
Fulfils the FST properties of the aerospace industry with regard to:
Flammability
FAR/JAR/CS § 25.853 (a) and App. F, Part I § (a) (1) (I)
Smoke Density
FAR/JAR/CS § 25.853 (d) and App. F, Part V § (b)
Toxicity
ABD 0031 and AITM 3.0005
Heat Release
FAR/JAR/CS § 25.853 (d) and App. F, Part IV § (h)
Range of Application
For the decorative surface design of cabin interiors in the aerospace industry.
Accredited in acc. with:
AIMS 04-08-002 (Airbus)
AIMS 04-08-012 (Airbus)
BMS10-83N Type VII (Boeing)
CMS-CT-301 (COMAC)
DHMS C 4.22 (Bombardier)
MEP 10-073 (Embraer)
ZMS 1083 (AVIC)
Color and Gloss
Color:available in colour shades for industrial series production
Gloss:obtainable in various gloss grades
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Topcoat 346-57 Technical Datasheet 346-57
Revision:13
Date of Issue:2019-05-23
Page:2/5
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Theoretical Coverage
Area Quantity Film thickness
300 m²1 kg 1 µm
4,8 m²1 kg 60 µm
630 ft²1 gal 1 mil
Recommended dry film thickness: 30 - 70 µm (1.2 - 2.8 mil) , depending on colour shade
and customer specification
Surface Pre-treatment
May be applied in most cases directly on to the clean primer/substrate.
Appropriate waterborne fillers (e.g. ALEXIT FST Filler 343-60) are to be applied on
composite substrates.
On metal substrates, chemical pretreatment (phosphating/chromating) is mandatory.
Additional application of primer (e.g. SEEVENAX 313-02) can further improve
adhesion.
A white primer (e.g. ALEXIT FST Filler 343-60) must be used under very brilliant
colours (such as yellow, orange or red) and light or pure white shades and defined dry
film thickness have to be applied. For further details please contact your local
Mankiewicz representative.
The recoating time of the paint layer underneath must be observed. For further details
please refer to the latest version of the relevant technical datasheet.
Trade Names and Packaging
Material Trade name Container size [net]
Base material ALEXIT FST-Topcoat 346-57 6 kg, 12 kg
US gal, US quart
Hardener ALEXIT Hardener 345-57 1 kg
US quart, US pint
Special packaging sizes available upon request.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Topcoat 346-57 Technical Datasheet 346-57
Revision:13
Date of Issue:2019-05-23
Page:3/5
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Mixing
Base Hardener Thinner
Trade
name
ALEXIT FST-Topcoat
346-57
ALEXIT Hardener
345-57
Water
By weight 6 1 see
"Application"
In order to guarantee optimal blending of the hardener the material must be pre-diluted
with the water first. Only then may the hardener be added and mixed in thoroughly
manually for approx. 1 minute.
The amount of water to be added is dependent on the required surface appearance -
please refer to "Application".
NOTE: Calculation of thinner amount based on mixture of base component and hardener.
Pot Life
approx. 3 h at 20 °C (68 °F)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Topcoat 346-57 Technical Datasheet 346-57
Revision:13
Date of Issue:2019-05-23
Page:4/5
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Application
Single-layer application, smooth surface
Compressed air spraying
Addition of water 20 %
Flow time (DIN EN ISO 2431 - 6 mm)12 - 22 s
Nozzle size 1.4 - 2.0 mm
Spraying pressure 1.5 - 4.0 bar (21.8 - 58.0 psi)
Two-layer application, pearl texture
1st work step
Addition of water 20 %
Flow time (DIN EN ISO 2431 - 6 mm)12 - 22 s
Nozzle size 1.4 - 2.0 mm
Spraying pressure 1.5 - 4.0 bar (21.8 - 58.0 psi)
Flash-off time at 20 °C (68 °F) / 50 % RH 45 - 60 min
2nd work step
fine texture coarse texture
Addition of water 10 - 15 %10 - 15 %
Nozzle size 1.4 - 2.0 mm 1.6 - 2.5 mm
Spraying pressure 0.6 - 1.2 bar (8.7 - 17.4 psi)0.3 - 0.8 bar (4.4 - 11.6 psi)
Please observe the technical recommendations of the equipment manufacturers.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST-Topcoat 346-57 Technical Datasheet 346-57
Revision:13
Date of Issue:2019-05-23
Page:5/5
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Drying
20 °C (68 °F) drying
/ 50 % RH
40 °C (104 °F)
drying
60 °C (140 °F)
drying
Flash-off time at 20 °C
(68 °F)
-45 - 60 min 45 - 60 min
Dust dry approx. 30 min --
Dry to touch approx. 60 min --
Assembly dry approx. 3 h 60 min 30 min
Recoating window
(without sanding)
3 h to 48 h After cool down
up to 24 h
After cool down
up to 24 h
Fully cured 7 d --
The temperature specified is the object temperature.
Recoating with ALEXIT FST Decor Basecoat 404-55, as well as CELEROL FST Decor
Basecoat 366-56 must be carried out at room temperature (20 °C / 68 °F) within a
drying time of 1 - 12 h .
If the recoating time is exceeded, the surface can be reactivated with 3M Scotch-Brite™
(fine grade).
Shelf Life
Material Shelf life
Base material 24 months
Hardener 12 months
The storage data specified relates to unopened original containers.
The recommended temperature during storage and transport is
5 – 35 °C (41 - 95 °F)
Protect from frost!
Additional Details
The substrate and the film thicknesses applied have an impact on the compliance with
the requirements of the aerospace industry.
Please refer to GTI 46 – Water-dilutable coating materials for industrial series production.
For additional application information refer to the respective application recommendation
or contact your local Mankiewicz support center.
The information contained in this document is based on our current state of research and development. Revisal by the user with regard to the intended purpose is
necessary due to the variety of processing options and fields of application – please refer to the General Terms and Conditions of Sale.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 1/12
SECTION 1. IDENTIFICATION
Product name
: ALEXIT-FST-Topcoat 346-57 909W White BAC70913 Semi-
gloss
Product code
: 34657.909W.U
Manufacturer or supplier's details
Manufacturer, importer,
supplier
: Mankiewicz Coatings L.L.C
Address
: 1200 Charleston Regional Parkway
Charleston, South Carolina 29492
USA
Telephone
: +1 (843) 6547755
Telefax
: +1 (843) 6547759
E-mail address
: sdb_info@umco.de
Emergency telephone
: USA Toll free +1 866 928 0789 EN/FR/ES(Carechem Interna-
tional)
Canada Toll free +1 800 579 7421 EN/FR (Carechem Interna-
tional)
Recommended use of the chemical and restrictions on use
Recommended use
: Industrial serial painting
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Not a hazardous substance or mixture.
GHS label elements
Not a hazardous substance or mixture.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
: Mixture of synthetic resins, water and pigments
Components
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 2/12
Chemical name CAS-No. Concentration (% w/w)
titanium dioxide 13463-67-7 >= 25 - < 40
1-propoxypropan-2-ol 1569-01-3 >= 1 - < 5
These contain:
propylidynetrimethanol 77-99-6 >= 0 - <= 0
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice
: In all cases of doubt, or when sickness symptoms persist,
seek medical attention.
Never give anything by mouth to an unconscious person.
If inhaled
: Remove to fresh air, keep patient warm and at rest.
Irregular breathing/no breathing: artificial respiration.
If unconscious place in recovery position and seek medical
advice.
In case of skin contact
: Take off all contaminated clothing immediately.
Wash skin thoroughly with soap and water or use recognised
skin cleanser.
Do NOT use solvents or thinners !
In case of eye contact
: Remove contact lenses, irrigate copiously with clean, fresh
water for at least 10 minutes, holding the eyelids apart and
seek medical advice.
If swallowed
: Do NOT induce vomiting.
If accidentally swallowed obtain immediate medical attention.
Never give anything by mouth to an unconscious person.
Keep at rest.
Most important symptoms
and effects, both acute and
delayed
: None known.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
: Alcohol resistant foam, CO2, powders
Unsuitable extinguishing
media
: High volume water jet
Specific hazards during fire
fighting
: Fire will produce dense black smoke. Exposure to
decomposition products may cause a health hazard.
Further information : Cool endangered containers with water in case of fire.
DO NOT ALLOW RUN-OFF FROM FIRE FIGHTING TO
ENTER DRAINS OR WATER COURSES!!
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 3/12
Special protective equipment
for fire-fighters
: As in any fire, wear self-contained breathing apparatus
pressure - demand, MSHA / NIOSH (approved or equivalent)
and full protective gear.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Exclude sources of ignition and ventilate the area.
Do not inhale vapors.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
: Do not let product enter drains.
If the product contaminates lakes, rivers or sewage, inform
appropriate authorities in accordance with local regulations.
Methods and materials for
containment and cleaning up
: Contain and collect spillage with non-combustible absorbent
materials, e.g. sand, earth, vermiculite, diatomaceous earth
and place in container for disposal according to local
regulations (see section 13).
Clean preferably with a detergent; avoid use of solvents.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Keep away from ignition sources and provide for good
ventilation.
Advice on safe handling
: Comply with the health and safety at work laws.
In addition, the product should only be used in areas from
which all naked lights and other sources of ignition have been
excluded.
Smoking, eating and drinking should be prohibited in the
application area.
Observe specific national regulations for handling and use of
paints.
Conditions for safe storage
: Keep container tightly closed. Never use pressure to empty:
container isnot a pressure vessel. No smoking. Prevent
unauthorized access.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Further information on stor-
age conditions
: Always keep in containers of same material as the original
one. See also instructions on the label. Avoid heating and
direct sunlight.
Keep container dry in a cool, well-ventilated place.
Avoid cooling to under 32°F.
Materials to avoid
: Keep away from oxidizing agents and strongly acid or alkaline
materials.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 4/12
Recommended storage tem-
perature
: 40 - 100 °F / 4 - 38 °C
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
titanium dioxide 13463-67-7 TWA 10 mg/m3 CA AB OEL
TWA (Total
dust)
10 mg/m3 CA BC OEL
TWA (respir-
able dust
fraction)
3 mg/m3 CA BC OEL
TWAEV (to-
tal dust)
10 mg/m3 CA QC OEL
VLE-PPT 10 mg/m3 NOM-010-
STPS-2014
TWA (total
dust)
15 mg/m3 OSHA Z-1
TWA (Total
dust)
10 mg/m3 OSHA P0
Engineering measures : Provide adequate ventilation. Where reasonably practicable
this shoud be achieved by the use of local exhaust ventilation
and good general extraction. If these are not sufficient to
maintain concentrations of particulates and below the OEL (=
Occupational Exposure Limit), suitable respiratory protection
must be worn.
Personal protective equipment
Respiratory protection
: If workers are exposed to concentrations above the exposure
limit they must use appropriate, certified respirators:
Use MSHA/NIOSH approved respirator if concentration
exceeds recommended exposure levels.
Dry grinding, torch cutting and/or welding however can
produce hazardous dust and/or vapor.
If possible, machine employing a wet medium.
Where practicable, install exhaust hoods to improve capture
of vapors and fumes and avoid exposition; otherwise wear
respiratory protection equipment.
Hand protection
Remarks
: Glove permeation data does not exist for this material.
The following glove(s) should be used for splash protection
only:
Appropriate material: nitrile
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 5/12
Eye protection
: Use safety glasses or face shield (ANSI Z87.1 or approved
equivalent).
Skin and body protection
: Personal should wear protective clothing as necessary to
prevent skin contact. All parts of the body should be washed
after contact.
Protective measures
: Do not eat or drink during work - no smoking.
Avoid product contact with skin, eyes and clothing.
When operators, whether spraying or not, have to work inside
the spray booth, ventilation is unlikely to be sufficient to
control particulates and solvent vapor in all cases. In such
circumstances they should wear a compressed air-fed
respirator during the spraying process until such time as the
particulates and solvent vapor concentration has fallen below
the exposure limits.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
: liquid
Color
: according product name
Odor
: characteristic
Boiling point/boiling range
: ca. 212 °F / 100 °C
Flash point
: Not applicable
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure
: 100 hPa (122 °F / 50 °C)
Density
: ca. 13.4 lb/gal (1.6 g/cm3)
(68 °F / 20 °C)
Solubility(ies)
Water solubility
: completely miscible
Autoignition temperature
: > 572 °F / > 300 °C
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 6/12
Viscosity
Flow time
: > 150 s
Cross section: 4 mm
Method: DIN 53211
> 100 s
Cross section: 6 mm
Method: ISO 2431
SECTION 10. STABILITY AND REACTIVITY
Reactivity
: No decomposition if stored and applied as directed.
Chemical stability
: Stable under normal conditions.
Possibility of hazardous reac-
tions
: No dangerous reaction known under conditions of normal use.
There are no data available on the preparation itself.
Conditions to avoid
: Stable under recommended storage and handling conditions
(See section 7).
Incompatible materials
: Keep away from oxidizing agents, strongly alkaline and
strongly acidic materials in order to avoid exothermic
reactions.
Hazardous decomposition
products
: When exposed to high temperatures may produce hazardous
decomposition products such as carbon monoxide and diox-
ide, smoke, oxides of nitrogen.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Not classified based on available information.
Skin corrosion/irritation
Not classified based on available information.
Serious eye damage/eye irritation
Not classified based on available information.
Respiratory or skin sensitization
Skin sensitization
Not classified based on available information.
Respiratory sensitization
Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 7/12
Carcinogenicity
Not classified based on available information.
IARC No ingredient of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
OSHA No component of this product present at levels greater than or equal to 0.1% is
on OSHA’s list of regulated carcinogens.
NTP No ingredient of this product present at levels greater than or equal to 0.1% is
identified as a known or anticipated carcinogen by NTP.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
Not classified based on available information.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks : Exposure of vapor concentration in excess of the stated OEL's
may result in adverse health effects such as mucous mem-
brane and respiratory system irritation and adverse effects on
kidney, liver and central nervous system. Symptoms and signs
include headache, dizziness, fatigue muscular weakness,
drowsiness and in extrem cases, loss of consciousness.
Repeated or prolonged contact with the preparation may
cause removal of natural fat from the skin resulting in non-
allergic contact dermatitis and absorption through the skin.
The liquid splashed in the eyes may cause irritation and re-
versible damage.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
Product:
Ecotoxicology Assessment
Acute aquatic toxicity
: There are no data available on the preparation itself.
Persistence and degradability
Product:
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 8/12
Biodegradability
: Remarks: There are no data available on the preparation it-
self.
Bioaccumulative potential
Product:
Bioaccumulation
: Remarks: There are no data available on the preparation it-
self.
Mobility in soil
Product:
Mobility
: Remarks: There are no data available on the preparation it-
self.
Other adverse effects
Product:
Ozone-Depletion Potential
: Regulation: 40 CFR Protection of Environment; Part 82 Pro-
tection of Stratospheric Ozone - CAA Section 602 Class I
Substances
Remarks: This product neither contains, nor was manufac-
tured with a Class I or Class II ODS as defined by the U.S.
Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
Additional ecological infor-
mation
: There are no data available on the preparation itself.
The product should not be allowed to enter drains or water
courses.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Dispose of in accordance with local regulations.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 9/12
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation
49 CFR
Not regulated as a dangerous good
SECTION 15. REGULATORY INFORMATION
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Acute Health Hazard
No SARA Hazards
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by
the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
This product does not contain any hazardous air pollutants (HAP), a s defined by the U.S. Clean
Air Act Section 112 (40 CFR 61).
This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for
Accidental Release Prevention (40 CFR 68.130, Subpart F).
VOC content excluding
water
: 0.77 lb/gal (92 g/l)
For the calculation of VOC values in this section all substances
have been considered which fall under the definition of VOC
according to 40 CFR 51.100. Additionally, the calculation
complies with the requirements of SCAQMD Rule 1106.1,
amended February 12, 1999.
Clean Water Act
This product does not contain any Hazardous Substances listed under the U.S. CleanWater Act,
Section 311, Table 116.4A.
This product does not contain any Hazardous Chemicals listed under the U.S. CleanWater Act,
Section 311, Table 117.3.
This product does not contain any toxic pollutants listed under the U.S. Clean Water Act Section
307
This product does not contain any priority pollutants related to the U.S. Clean Water Act
US State Regulations
Massachusetts Right To Know
aluminium oxide 1344-28-1
Pennsylvania Right To Know
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 10/12
aluminium oxide 1344-28-1
Maine Chemicals of High Concern
Product does not contain any listed chemicals
Vermont Chemicals of High Concern
1,1'-(ethane-1,2-diyl)bis[pentabromobenzene] 84852-53-9
Washington Chemicals of High Concern
1,1'-(ethane-1,2-diyl)bis[pentabromobenzene] 84852-53-9
California Permissible Exposure Limits for Chemical Contaminants
titanium dioxide 13463-67-7
The ingredients of this product are reported in the following inventories:
TSCA
: All substances listed as active on the TSCA inventory
SECTION 16. OTHER INFORMATION
Further information
NFPA 704: HMIS® IV:
HMIS® ratings are based on a 0-4 rating
scale, with 0 representing minimal haz-
ards or risks, and 4 representing signifi-
cant hazards or risks. The "*" represents
a chronic hazard, while the "/" represents
the absence of a chronic hazard.
Health
0=Slightly HazardousSlightly Hazardous
2=Hazardous
3=Extreme danger
4=Deadly
Flammability
0=Will not burn
2=Flashpoint below 200 F
3=Flashpoint below 100 F
4=Flashpoint below 73 F
HEALTH
0
1
0
Flammability
Instability
Special hazard
FLAMMABILITY
PHYSICAL HAZARD
/
0
1
0
Health
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 11/12
Instability
0=Stable
1=Unstable if heated
2=Violent chemical reaction; water reactive
3=Shock or heat may detonate
4=May detonate
Special hazard
SA Simple Asphyxiant
ACID Acid
OX Oxidizer
W Water Reactive
CORR Corrosive
Full text of other abbreviations
CA AB OEL : Canada. Alberta, Occupational Health and Safety Code (table
2: OEL)
CA BC OEL : Canada. British Columbia OEL
CA QC OEL : Québec. Regulation respecting occupational health and safe-
ty, Schedule 1, Part 1: Permissible exposure values for air-
borne contaminants
NOM-010-STPS-2014 : Mexico. Norm NOM-010-STPS-2014 on Chemicals Polluting
the Work Environment - Identification, Assessment and Con-
trol - Appendix 1 Occupational Exposure Limits
OSHA P0 : USA. OSHA - TABLE Z-1 Limits for Air Contaminants -
1910.1000
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) - Table Z-1 Lim-
its for Air Contaminants
CA AB OEL / TWA : 8-hour Occupational exposure limit
CA BC OEL / TWA : 8-hour time weighted average
CA QC OEL / TWAEV : Time-weighted average exposure value
NOM-010-STPS-2014 / VLE-
PPT
: Time weighted average limit value
OSHA P0 / TWA : 8-hour time weighted average
OSHA Z-1 / TWA : 8-hour time weighted average
AICS - Australian Inventory of Chemical Substances; AIIC - Australian Inventory of Industrial
Chemicals; ASTM - American Society for the Testing of Materials; bw - Body weight; CERCLA -
Comprehensive Environmental Response, Compensation, and Liability Act; CMR - Carcinogen,
Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for Standardisation;
DOT - Department of Transportation; DSL - Domestic Substances List (Canada); ECx - Concen-
tration associated with x% response; EHS - Extremely Hazardous Substance; ELx - Loading rate
associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical
Substances (Japan); ErCx - Concentration associated with x% growth rate response; ERG -
Emergency Response Guide; GHS - Globally Harmonized System; GLP - Good Laboratory Prac-
tice; HMIS - Hazardous Materials Identification System; IARC - International Agency for Research
on Cancer; IATA - International Air Transport Association; IBC - International Code for the Con-
struction and Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal in-
hibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Ex-
isting Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - In-
ternational Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - Interna-
tional Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal
Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Me-
dian Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Topcoat 346-57
Product No.: 34657.909W.U
Version
1.13
Revision Date:
01/18/2021
SDS Number:
F-34657909WU
Date of last issue: 09/26/2020
Date of first issue: 07/31/2015
Page 12/12
MSHA - Mine Safety and Health Administration; n.o.s. - Not Otherwise Specified; NFPA - National
Fire Protection Association; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL -
No Observed (Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NTP - Na-
tional Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization
for Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution
Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Invento-
ry of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relation-
ship; RCRA - Resource Conservation and Recovery Act; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals; RQ - Reportable Quantity; SADT - Self-Accelerating
Decomposition Temperature; SARA - Superfund Amendments and Reauthorization Act; SDS -
Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TSCA - Toxic Substances
Control Act (United States); UN - United Nations; UNRTDG - United Nations Recommendations
on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumulative
Revision Date : 01/18/2021
The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
US / Z8
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST Klarlack 404-15 / Clearcoat Technical Datasheet 404-15
Revision:3
Date of Issue:2016-06-06
Page:1/3
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Characteristics
Solvent-based, polyurethane-based two-component clearcoat
Easy to polish
Excellent chemical and mechanical resistance
Low heat release
Fulfils the FST properties of the aerospace industry with regard to:
Flammability
FAR/JAR/CS § 25.853 (a) and App. F, Part I § (a) (1) (I)
Smoke Gas Density
FAR/JAR/CS § 25.853 (d) and App. F, Part V § (b)
Toxicity
ABD 0031 and AITM 3.0005
Heat Release
FAR/JAR/CS § 25.853 (d) and App. F, Part IV § (h)
Range of Application
For the transparent protective coating of design effect paints, monochrome colour shades
and Decorative Film Coating (DFC) surfaces of cabin interiors in the aerospace industry.
Qualified acc. to:
AIMS 04-08-003 (Airbus)
BMS 10-121B Type II and IV (Boeing)
DON 814 (Dornier)
Color and Gloss
Color:transparent
Gloss:mat, silk gloss, glossy
Theoretical Coverage
Area Quantity Film thickness
280 m²1 kg 1 µm
22.4 m²1 kg 12.5 µm
455 ft²1 gal 1 mil
910 ft²1 gal 0.5 mil
Recommended dry film thickness:
0.5 - 0.8 mil when used as adhesion promoter
0.8 .- 1.5 mil when used as final clear coat layer
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST Klarlack 404-15 / Clearcoat Technical Datasheet 404-15
Revision:3
Date of Issue:2016-06-06
Page:2/3
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Surface Pre-treatment
Can be applied in most cases directly on to the clean base coat / primer layer (e.g.
ALEXIT FST-Topcoat 346-57) or DFC surfaces.
Please observe the recoating times of the base coat layers.
Trade Names and Packaging
Material Trade name Container size [net]
Base Material ALEXIT FST Klarlack 404-15/Clearcoat 10 kg
Hardener ALEXIT Härter/Hardener 450 1 kg
Thinner ALEXIT Verdünner/Thinner 62 1 kg
Special packaging sizes available upon request.
Mixing
Base Hardener Thinner
Trade
name
ALEXIT FST Klarlack 404-15
/ Clearcoat
ALEXIT
Härter/Hardener 450
ALEXIT
Verdünner/Thinner
62
By
weight
10 1 see "Application"
NOTE: Calculation of thinner amount based on mixture of base component and hardener.
Pot Life
approx. 4 h at 20 °C (68 °F)
Application
Compressed air spraying
Thinner 20 - 50 %
Flow time (DIN EN ISO 2431 - 4mm)25 - 45 s
Nozzle size 1.2 - 1.6 mm
Atomizing pressure 1.5 - 4.0 bar (21.8 - 58.0 psi)
Please observe the technical recommendations of the equipment manufacturers.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
ALEXIT FST Klarlack 404-15 / Clearcoat Technical Datasheet 404-15
Revision:3
Date of Issue:2016-06-06
Page:3/3
Mankiewicz Gebr. & Co. (GmbH & Co. KG)
Georg-Wilhelm-Str. 189
21107 Hamburg, Germany
Tel. +49 (40) 751030
Fax +49 (40) 75103510
Drying
20° C (68 °F) drying 60 °C (140 °F) drying
Flash-off time at 20 °C (68 °F)-15 min
Dust-dry approx. 20 min -
Assembly-dry approx. 3 h 2 h
Fully cured approx. 7 d -
The temperature specified is the object temperature.
Shelf Life
Material Shelf life
Base material 18 months
Hardener 12 months
The storage data specified relates to unopened original containers.
The recommended temperature during storage and transport is
5 – 38 °C (40 - 100 °F).
Additional Details
The substrate and the film thicknesses applied have an impact on the compliance with
the requirements of the aerospace industry.
The information contained in this document is based on our current state of research and development. Revisal by the user with regard to the intended purpose is
necessary due to the variety of processing options and fields of application – please refer to the General Terms and Conditions of Sale.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 1/19
SECTION 1. IDENTIFICATION
Product name
: ALEXIT-FST-Klarlack 404-15 Clearcoat 00J0 Colourless
BAC900 Semigloss
Product code
: 40415.00J0.U
Manufacturer or supplier's details
Manufacturer, importer,
supplier
: Mankiewicz Coatings L.L.C
Address
: 1200 Charleston Regional Parkway
Charleston, South Carolina 29492
USA
Telephone
: +1 (843) 6547755
Telefax
: +1 (843) 6547759
E-mail address
: sdb_info@umco.de
Emergency telephone
: CHEMTREC +1 (800) 4249300 or + (703) 5273887
Recommended use of the chemical and restrictions on use
Recommended use
: Industrial serial painting
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids
: Category 3
Skin irritation
: Category 2
Eye irritation
: Category 2A
Skin sensitization
: Category 1
Carcinogenicity
: Category 2
Specific target organ toxicity
- repeated exposure
: Category 2
GHS label elements
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 2/19
Hazard pictograms
:
Signal Word
: Warning
Hazard Statements
: H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or
repeated exposure.
Precautionary Statements
: Prevention:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read
and understood.
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe dust/ fume/ gas/ mist/ vapors/ spray.
P264 Wash skin thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of
the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/
attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/
attention.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
tion.
P362 Take off contaminated clothing and wash before reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 3/19
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature
: Mixture of synthetic resins and organic solvents
Components
Chemical name CAS-No. Concentration (% w/w)
xylenes 1330-20-7 >= 12.5 - < 20
2-methoxy-1-methylethyl acetate 108-65-6 >= 12.5 - < 20
ethylbenzene 100-41-4 >= 12.5 - < 20
n-butyl acetate 123-86-4 >= 1 - < 5
reaction mass of a-3-(3-(2H-
benzotriazol-2-yl)-5-tert-butyl-4-
hydroxyphenyl)propionyl-w-
hydroxypoly(oxyethylene) and a-3-(3-
(2H-benzotriazol-2-yl)-5-tert-butyl-4-
hydroxyphenyl)propionyl-w-3-(3-(2H-
benzotriazol-2-yl)-5-tert-butyl-4-
hydroxy-
phenyl)propionyloxypoly(oxyethylene)
104810-47-1
104810-48-2
>= 0.5 - < 1
Reaction mass of Bis(1,2,2,6,6-
pentamethyl-4-piperidyl) sebacate
and Methyl 1,2,2,6,6-pentamethyl-4-
piperidyl sebacate
41556-26-7
82919-37-7
>= 0.25 - < 0.5
These contain:
2-methoxypropyl acetate 70657-70-4 > 0 - <= 0.1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice
: In all cases of doubt, or when sickness symptoms persist,
seek medical attention.
Never give anything by mouth to an unconscious person.
If inhaled
: Remove to fresh air, keep patient warm and at rest.
Irregular breathing/no breathing: artificial respiration.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 4/19
If unconscious place in recovery position and seek medical
advice.
In case of skin contact
: Take off all contaminated clothing immediately.
Wash skin thoroughly with soap and water or use recognised
skin cleanser.
Do NOT use solvents or thinners !
In case of eye contact
: Remove contact lenses, irrigate copiously with clean, fresh
water for at least 10 minutes, holding the eyelids apart and
seek medical advice.
If swallowed
: Do NOT induce vomiting.
If accidentally swallowed obtain immediate medical attention.
Never give anything by mouth to an unconscious person.
Keep at rest.
Most important symptoms
and effects, both acute and
delayed
: Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Suspected of causing cancer.
May cause damage to organs through prolonged or repeated
exposure.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
: Alcohol resistant foam, CO2, powders
Unsuitable extinguishing
media
: High volume water jet
Specific hazards during fire
fighting
: Fire will produce dense black smoke. Exposure to
decomposition products may cause a health hazard.
Further information : Cool endangered containers with water in case of fire.
DO NOT ALLOW RUN-OFF FROM FIRE FIGHTING TO
ENTER DRAINS OR WATER COURSES!!
Special protective equipment
for fire-fighters
: As in any fire, wear self-contained breathing apparatus
pressure - demand, MSHA / NIOSH (approved or equivalent)
and full protective gear.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Exclude sources of ignition and ventilate the area.
Do not inhale vapors.
Refer to protective measures listed in sections 7 and 8.
Environmental precautions
: Do not let product enter drains.
If the product contaminates lakes, rivers or sewage, inform
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 5/19
appropriate authorities in accordance with local regulations.
Methods and materials for
containment and cleaning up
: Contain and collect spillage with non-combustible absorbent
materials, e.g. sand, earth, vermiculite, diatomaceous earth
and place in container for disposal according to local
regulations (see section 13).
Clean preferably with a detergent; avoid use of solvents.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: The product should only be used in areas from which all
naked lights and other sources of ignition have been
excluded.
Preparation may charge electrostatically: always use earthing
leads whentransferring from one container to another.
Operators should wear anti-static footwear and clothing. No
sparking tools should be used.
Vapors are heavier than air and may spread along floors.
Vapors may form explosive mixtures with air.
Advice on safe handling
: Prevent the creation of flammable or explosive concentrations
of vapor in air and avoid vapor concentrations higher than the
occupational exposure limits.
Comply with the health and safety at work laws.
Smoking, eating and drinking should be prohibited in the
application area.
Observe specific national regulations for handling and use of
paints.
Conditions for safe storage
: Electrical equipment should be protected to the appropriate
standard. Floors should be of the conducting type.
Keep container tightly closed. Never use pressure to empty:
container isnot a pressure vessel. No smoking. Prevent
unauthorized access.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Further information on stor-
age conditions
: Always keep in containers of same material as the original
one. See also instructions on the label. Avoid heating and
direct sunlight.
Keep container dry in a cool, well-ventilated place.
Materials to avoid
: Keep away from oxidizing agents and strongly acid or alkaline
materials.
Recommended storage tem-
perature
: 40 - 100 °F / 4 - 38 °C
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 6/19
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
xylenes 1330-20-7 VLE-PPT 100 ppm NOM-010-
STPS-2014
VLE-CT 150 ppm NOM-010-
STPS-2014
TWA 100 ppm
435 mg/m3
OSHA Z-1
TWA 100 ppm ACGIH
STEL 150 ppm ACGIH
STEL 150 ppm
651 mg/m3
CA AB OEL
TWA 100 ppm
434 mg/m3
CA AB OEL
TWAEV 100 ppm
434 mg/m3
CA QC OEL
STEV 150 ppm
651 mg/m3
CA QC OEL
TWA 100 ppm CA BC OEL
STEL 150 ppm CA BC OEL
STEL 150 ppm
655 mg/m3
OSHA P0
TWA 100 ppm
435 mg/m3
OSHA P0
2-methoxy-1-methylethyl
acetate
108-65-6 TWA 50 ppm CA BC OEL
STEL 75 ppm CA BC OEL
TWA 50 ppm
270 mg/m3
CA ON OEL
TWA 50 ppm US WEEL
ethylbenzene 100-41-4 TWA 20 ppm CR OEL
Further information: Confirmed animal carcinogen, Substances for
which there is a Biological Exposure Index or Indices (see BEI
section), Visual impairment, Upper Respiratory Tract irritation,
Kidney damage (nephropathy)
TWA 100 ppm
434 mg/m3
CA AB OEL
STEL 125 ppm
543 mg/m3
CA AB OEL
TWA 20 ppm CA BC OEL
STEV 125 ppm
543 mg/m3
CA QC OEL
TWAEV 100 ppm
434 mg/m3
CA QC OEL
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 7/19
VLE-PPT 20 ppm NOM-010-
STPS-2014
TWA 20 ppm ACGIH
TWA 100 ppm
435 mg/m3
NIOSH REL
ST 125 ppm
545 mg/m3
NIOSH REL
TWA 100 ppm
435 mg/m3
OSHA Z-1
TWA 100 ppm
435 mg/m3
OSHA P0
STEL 125 ppm
545 mg/m3
OSHA P0
n-butyl acetate 123-86-4 TWA 50 ppm CR OEL
Further information: Eye irritation, Upper Respiratory Tract irrita-
tion
STEL 150 ppm CR OEL
Further information: Eye irritation, Upper Respiratory Tract irrita-
tion
TWA 150 ppm
713 mg/m3
CA AB OEL
STEL 200 ppm
950 mg/m3
CA AB OEL
TWA 20 ppm CA BC OEL
TWAEV 150 ppm
713 mg/m3
CA QC OEL
STEV 200 ppm
950 mg/m3
CA QC OEL
VLE-PPT 150 ppm NOM-010-
STPS-2014
VLE-CT 200 ppm NOM-010-
STPS-2014
TWA 150 ppm
710 mg/m3
NIOSH REL
ST 200 ppm
950 mg/m3
NIOSH REL
TWA 150 ppm
710 mg/m3
OSHA Z-1
TWA 150 ppm
710 mg/m3
OSHA P0
STEL 200 ppm
950 mg/m3
OSHA P0
TWA 50 ppm ACGIH
STEL 150 ppm ACGIH
2-methoxypropyl acetate 70657-70-4 TWA 20 ppm CA BC OEL
STEL 40 ppm CA BC OEL
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 8/19
Biological occupational exposure limits
Components CAS-No. Control
parameters
Biological
specimen
Sam-
pling
time
Permissible
concentra-
tion
Basis
xylenes 1330-20-7 Methyl-
hippuric
acids
Urine End of
shift (As
soon as
possible
after
exposure
ceases)
1.5 g/g cre-
atinine
ACGIH
BEI
Methyl-
hippuric
acid
Urine End of
shift
1.5 g/g cre-
atinine
MX BEI
Methyl-
hippuric
acids
Urine End of
shift
1.5 g/g cre-
atinine
CR BEI
ethylbenzene 100-41-4 Sum of
Mandelic
acid plus
phenylgly-
oxylic acid
Urine End of
shift at
end of
work-
week
0.7 g/g cre-
atinine
MX BEI
Sum of
mandelic
acid and
phenyl gly-
oxylic acid
Urine End of
shift (As
soon as
possible
after
exposure
ceases)
0.15 g/g
creatinine
ACGIH
BEI
Sum of
mandelic
acid and
phenyl gly-
oxylic acid
Urine End of
shift
0.15 g/g
creatinine
CR BEI
Engineering measures : Provide adequate ventilation. Where reasonably practicable
this should be achieved by the use of local exhaust
ventilation and good general extraction. If these are not
sufficient to maintain aerosol- and solvent vapors
concentration below the OEL, suitable respiratory protection
must be worn.
Personal protective equipment
Respiratory protection
: If workers are exposed to concentrations above the exposure
limit they must use appropriate, certified respirators.
Use MSHA/NIOSH approved respirator if concentration
exceeds recommended exposure levels.
Dry grinding, torch cutting and/or welding however can
produce hazardous dust and/or vapor.
If possible, machine employing a wet medium.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 9/19
Where practicable, install exhaust hoods to improve capture
of vapors and fumes and avoid exposition; otherwise wear
respiratory protection equipment.
Hand protection
Remarks
: Glove permeation data does not exist for this material.
The following glove(s) should be used for splash protection
only:
Appropriate material: nitrile
Eye protection
: Use safety glasses or face shield (ANSI Z87.1 or approved
equivalent).
Skin and body protection
: Personal should wear protective clothing as necessary to
prevent skin contact. All parts of the body should be washed
after contact.
Protective measures
: Do not eat or drink during work - no smoking.
Avoid product contact with skin, eyes and clothing.
Avoid the inhalation of dust from sanding, particulates and
spray mist arising from the application of this preparation.
When operators, whether spraying or not, have to work inside
the spray booth, ventilation is unlikely to be sufficient to
control particulates and solvent vapor in all cases. In such
circumstances they should wear a compressed air-fed
respirator during the spraying process until such time as the
particulates and solvent vapor concentration has fallen below
the exposure limits.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
: liquid
Color
: according product name
Odor
: characteristic
Boiling point/boiling range
: ca. 248 °F / 120 °C
Flash point
: 82 °F / 28 °C
Method: ISO 13736
Upper explosion limit / Upper
flammability limit
: 10 %(V)
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 10/19
Lower explosion limit / Lower
flammability limit
: 1 %(V)
Vapor pressure
: 100 hPa (122 °F / 50 °C)
Density
: 9.2 lb/gal (1.1 g/cm3)
(68 °F / 20 °C)
Solubility(ies)
Water solubility
: insoluble
Autoignition temperature
: > 752 °F / > 400 °C
Viscosity
Flow time
: < 59 s
Cross section: 4 mm
Method: DIN 53211
< 40 s
Cross section: 6 mm
Method: ISO 2431
SECTION 10. STABILITY AND REACTIVITY
Reactivity
: No decomposition if stored and applied as directed.
Chemical stability
: Stable under normal conditions.
Possibility of hazardous reac-
tions
: No dangerous reaction known under conditions of normal use.
There are no data available on the preparation itself.
Conditions to avoid
: Stable under recommended storage and handling conditions
(See section 7).
Incompatible materials
: Keep away from oxidizing agents, strongly alkaline and
strongly acidic materials in order to avoid exothermic
reactions.
Hazardous decomposition
products
: When exposed to high temperatures may produce hazardous
decomposition products such as carbon monoxide and diox-
ide, smoke, oxides of nitrogen.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Not classified based on available information.
Product:
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 11/19
Acute oral toxicity
: Acute toxicity estimate: > 5,000 mg/kg
Method: Calculation method
Acute inhalation toxicity
: Acute toxicity estimate: 34.74 mg/l
Exposure time: 4 h
Test atmosphere: vapor
Method: Calculation method
Acute dermal toxicity
: Acute toxicity estimate: > 5,000 mg/kg
Method: Calculation method
Components:
xylenes:
Acute oral toxicity
: LD50 Oral (Rat): 4,300 mg/kg
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
May cause an allergic skin reaction.
Respiratory sensitization
Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Suspected of causing cancer.
IARC Group 2B: Possibly carcinogenic to humans
ethylbenzene 100-41-4
OSHA No component of this product present at levels greater than or equal to 0.1% is
on OSHA’s list of regulated carcinogens.
NTP No ingredient of this product present at levels greater than or equal to 0.1% is
identified as a known or anticipated carcinogen by NTP.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
Not classified based on available information.
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 12/19
STOT-repeated exposure
May cause damage to organs through prolonged or repeated exposure.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks : Exposure of vapor concentration in excess of the stated OEL's
may result in adverse health effects such as mucous mem-
brane and respiratory system irritation and adverse effects on
kidney, liver and central nervous system. Symptoms and signs
include headache, dizziness, fatigue muscular weakness,
drowsiness and in extrem cases, loss of consciousness.
Repeated or prolonged contact with the preparation may
cause removal of natural fat from the skin resulting in non-
allergic contact dermatitis and absorption through the skin.
The liquid splashed in the eyes may cause irritation and re-
versible damage.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
Product:
Ecotoxicology Assessment
Acute aquatic toxicity
: There are no data available on the preparation itself.
Components:
Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-
pentamethyl-4-piperidyl sebacate:
Toxicity to fish
: LC50 (Lepomis macrochirus (Bluegill sunfish)): 0.97 mg/l
Exposure time: 96 h
Method: OECD Test Guideline 203
Toxicity to daphnia and other
aquatic invertebrates
: EC50 (Daphnia magna (Water flea)): 20 mg/l
Exposure time: 48 h
Method: OECD Test Guideline 202
Toxicity to algae/aquatic
plants
: EC50 (Desmodesmus subspicatus (green algae)): 1.68 mg/l
Exposure time: 72 h
Method: OECD Test Guideline 201
Remarks: The product has low solubility in the test medium.
An aqueous dispersion was tested.
Toxicity to daphnia and other
aquatic invertebrates (Chron-
: NOEC (Daphnia magna (Water flea)): 1 mg/l
Exposure time: 21 d
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 13/19
ic toxicity)
Method: OECD Test Guideline 211
Remarks: The product has low solubility in the test medium.
An aqueous dispersion was tested.
Persistence and degradability
Product:
Biodegradability
: Remarks: There are no data available on the preparation it-
self.
Bioaccumulative potential
Product:
Bioaccumulation
: Remarks: There are no data available on the preparation it-
self.
Mobility in soil
Product:
Mobility
: Remarks: There are no data available on the preparation it-
self.
Other adverse effects
Product:
Ozone-Depletion Potential
: Regulation: 40 CFR Protection of Environment; Part 82 Pro-
tection of Stratospheric Ozone - CAA Section 602 Class I
Substances
Remarks: This product neither contains, nor was manufac-
tured with a Class I or Class II ODS as defined by the U.S.
Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
Additional ecological infor-
mation
: There are no data available on the preparation itself.
The product should not be allowed to enter drains or water
courses.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Dispose of in accordance with local regulations.
SECTION 14. TRANSPORT INFORMATION
International Regulations
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 14/19
IATA-DGR
UN/ID No. : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : 3
EmS Code : F-E, S-E
Marine pollutant : no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation
49 CFR
UN/ID/NA number : UN 1263
Proper shipping name : PAINT
Class : 3
Packing group : III
Labels : FLAMMABLE LIQUID
Marine pollutant : no
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely
based upon the properties of the unpackaged material as it is described within this Safety Data
Sheet. Transportation classifications may vary by mode of transportation, package sizes, and
variations in regional or country regulations.
SECTION 15. REGULATORY INFORMATION
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Fire Hazard
Acute Health Hazard
Chronic Health Hazard
Flammable (gases, aerosols, liquids, or solids)
Respiratory or skin sensitization
Carcinogenicity
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 15/19
Specific target organ toxicity (single or repeated exposure)
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313
: The following components are subject to reporting levels
established by SARA Title III, Section 313:
xylenes
1330-20-7 >= 10 - < 20 %
ethylbenzene
100-41-4 >= 10 - < 20 %
Clean Air Act
This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by
the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
The following chemical(s) are listed as HAP under the U.S. Clean Air Act, Section 112 (40 CFR
61):
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for
Accidental Release Prevention (40 CFR 68.130, Subpart F).
The following chemical(s) are listed under the U.S. Clean Air Act Section 111 SOCMI Intermedi-
ate or Final VOC's (40 CFR 60.489):
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 1 - < 5 %
VOC content excluding
water
: 4.70 lb/gal (564 g/l)
For the calculation of VOC values in this section all substances
have been considered which fall under the definition of VOC
according to 40 CFR 51.100. Additionally, the calculation
complies with the requirements of SCAQMD Rule 1106.1,
amended February 12, 1999.
Clean Water Act
The following Hazardous Substances are listed under the U.S. CleanWater Act, Section 311, Ta-
ble 116.4A:
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 1 - < 5 %
The following Hazardous Chemicals are listed under the U.S. CleanWater Act, Section 311, Table
117.3:
xylenes 1330-20-7 >= 10 - < 20 %
ethylbenzene 100-41-4 >= 10 - < 20 %
n-butyl acetate 123-86-4 >= 1 - < 5 %
This product contains the following toxic pollutants listed under the U.S. Clean Water Act Section
307
ethylbenzene 100-41-4 >= 10 - < 20 %
This product contains the following priority pollutants related to the U.S. Clean Water Act:
ethylbenzene 100-41-4 >= 10 - < 20 %
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 16/19
US State Regulations
Massachusetts Right To Know
xylenes 1330-20-7
ethylbenzene 100-41-4
silicon dioxide 7631-86-9
n-butyl acetate 123-86-4
Pennsylvania Right To Know
xylenes 1330-20-7
ethylbenzene 100-41-4
silicon dioxide 7631-86-9
n-butyl acetate 123-86-4
2-methylpropan-1-ol 78-83-1
ethyl acetate 141-78-6
Maine Chemicals of High Concern
octamethylcyclotetrasiloxane 556-67-2
Vermont Chemicals of High Concern
ethylbenzene 100-41-4
octamethylcyclotetrasiloxane 556-67-2
butanone 78-93-3
Washington Chemicals of High Concern
ethylbenzene 100-41-4
butanone 78-93-3
California Prop. 65
WARNING: This product can expose you to chemicals including ethylbenzene, ethanol, which
is/are known to the State of California to cause cancer, and
ethanol, which is/are known to the State of California to cause birth defects or other reproductive
harm. For more information go to www.P65Warnings.ca.gov.
California List of Hazardous Substances
xylenes 1330-20-7
ethylbenzene 100-41-4
silicon dioxide 7631-86-9
n-butyl acetate 123-86-4
California Permissible Exposure Limits for Chemical Contaminants
xylenes 1330-20-7
2-methoxy-1-methylethyl acetate 108-65-6
ethylbenzene 100-41-4
n-butyl acetate 123-86-4
The ingredients of this product are reported in the following inventories:
TSCA
: All substances listed as active on the TSCA inventory
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 17/19
SECTION 16. OTHER INFORMATION
Further information
NFPA 704: HMIS® IV:
HMIS® ratings are based on a 0-4 rating
scale, with 0 representing minimal haz-
ards or risks, and 4 representing signifi-
cant hazards or risks. The "*" represents
a chronic hazard, while the "/" represents
the absence of a chronic hazard.
Health
0=Slightly HazardousSlightly Hazardous
2=Hazardous
3=Extreme danger
4=Deadly
Flammability
0=Will not burn
2=Flashpoint below 200 F
3=Flashpoint below 100 F
4=Flashpoint below 73 F
Instability
0=Stable
1=Unstable if heated
2=Violent chemical reaction; water reactive
3=Shock or heat may detonate
4=May detonate
Special hazard
SA Simple Asphyxiant
ACID Acid
OX Oxidizer
W Water Reactive
CORR Corrosive
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
ACGIH BEI : ACGIH - Biological Exposure Indices (BEI)
CA AB OEL : Canada. Alberta, Occupational Health and Safety Code (table
2: OEL)
CA BC OEL : Canada. British Columbia OEL
HEALTH
2
3
0
Flammability
Instability
Special hazard
FLAMMABILITY
PHYSICAL HAZARD
*
2
3
0
Health
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 18/19
CA ON OEL : Ontario Table of Occupational Exposure Limits made under
the Occupational Health and Safety Act.
CA QC OEL : Québec. Regulation respecting occupational health and safe-
ty, Schedule 1, Part 1: Permissible exposure values for air-
borne contaminants
CR BEI : Maximum allowable occupational exposure limits in the work-
place - Table 3. Adopted Biological Exposure Indices
CR OEL : Costa Rica. Maximum allowable occupational exposure limits
in the workplace.
MX BEI : Official Mexican Norm NOM-047-SSA1-2011, Environmental
Health - Biological exposure indices for workers occupational-
ly exposed to chemical agents
NIOSH REL : USA. NIOSH Recommended Exposure Limits
NOM-010-STPS-2014 : Mexico. Norm NOM-010-STPS-2014 on Chemicals Polluting
the Work Environment - Identification, Assessment and Con-
trol - Appendix 1 Occupational Exposure Limits
OSHA P0 : USA. OSHA - TABLE Z-1 Limits for Air Contaminants -
1910.1000
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) - Table Z-1 Lim-
its for Air Contaminants
US WEEL : USA. Workplace Environmental Exposure Levels (WEEL)
ACGIH / TWA : 8-hour, time-weighted average
ACGIH / STEL : Short-term exposure limit
CA AB OEL / TWA : 8-hour Occupational exposure limit
CA AB OEL / STEL : 15-minute occupational exposure limit
CA BC OEL / TWA : 8-hour time weighted average
CA BC OEL / STEL : short-term exposure limit
CA ON OEL / TWA : Time-Weighted Average Limit (TWA)
CA QC OEL / TWAEV : Time-weighted average exposure value
CA QC OEL / STEV : Short-term exposure value
CR OEL / TWA : Time weighted average 8-hr value
CR OEL / STEL : Short term exposure limit
NIOSH REL / TWA : Time-weighted average concentration for up to a 10-hour
workday during a 40-hour workweek
NIOSH REL / ST : STEL - 15-minute TWA exposure that should not be exceeded
at any time during a workday
NOM-010-STPS-2014 / VLE-
PPT
: Time weighted average limit value
NOM-010-STPS-2014 / VLE-
CT
: Short term exposure limit value
OSHA P0 / TWA : 8-hour time weighted average
OSHA P0 / STEL : Short-term exposure limit
OSHA Z-1 / TWA : 8-hour time weighted average
US WEEL / TWA : 8-hr TWA
AICS - Australian Inventory of Chemical Substances; AIIC - Australian Inventory of Industrial
Chemicals; ASTM - American Society for the Testing of Materials; bw - Body weight; CERCLA -
Comprehensive Environmental Response, Compensation, and Liability Act; CMR - Carcinogen,
Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for Standardisation;
DOT - Department of Transportation; DSL - Domestic Substances List (Canada); ECx - Concen-
tration associated with x% response; EHS - Extremely Hazardous Substance; ELx - Loading rate
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
SAFETY DATA SHEET
Commercial Product Name: ALEXIT-FST-Klarlack 404-15 Clearcoat
Product No.: 40415.00J0.U
Version
1.12
Revision Date:
09/30/2020
SDS Number:
F-4041500J0U
Date of last issue: 09/12/2020
Date of first issue: 07/31/2015
Page 19/19
associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical
Substances (Japan); ErCx - Concentration associated with x% growth rate response; ERG -
Emergency Response Guide; GHS - Globally Harmonized System; GLP - Good Laboratory Prac-
tice; HMIS - Hazardous Materials Identification System; IARC - International Agency for Research
on Cancer; IATA - International Air Transport Association; IBC - International Code for the Con-
struction and Equipment of Ships carr ying Dangerous Chemicals in Bulk; IC50 - Half maximal in-
hibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Ex-
isting Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - In-
ternational Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - Interna-
tional Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal
Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Me-
dian Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
MSHA - Mine Safety and Health Administration; n.o.s. - Not Otherwise Specified; NFPA - National
Fire Protection Association; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL -
No Observed (Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NTP - Na-
tional Toxicology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization
for Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution
Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Invento-
ry of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relation-
ship; RCRA - Resource Conservation and Recovery Act; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals; RQ - Reportable Quantity; SADT - Self-Accelerating
Decomposition Temperature; SARA - Superfund Amendments and Reauthorization Act; SDS -
Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TSCA - Toxic Substances
Control Act (United States); UN - United Nations; UNRTDG - United Nations Recommendations
on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumulative
Revision Date : 09/30/2020
The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
US / Z8
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818
DocuSign Envelope ID: F8B7C52B-189D-400F-89D0-0D8E77509818