Loading...
HomeMy WebLinkAboutMFP23002493.pdfDEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT Minor Franchise Permit: MFP23002493 IVR Number: 23002493 Permit Information Permit Name: P.062242 Address/Location:05/11/2023Application Date:6197800025Parcel Number: 18408 116TH AVE SE Permit Type:05/22/2023Issue Date:Franchise Permit Work Class:05/21/2024Expiration Date:Minor Utility Job Number: P.062242Franchise Type:Telephone Description: Lumen to access HH11602A and HH18800 for new fiber placement. No disturbance of surface. Contacts Name Address PhoneTypeBilling Austin Sweeney Century Link 23315 66th Ave S Kent, WA 98032 C: (253) 766-7549ApplicantX Austin Sweeney Century Link 23315 66th Ave S Kent, WA 98032 C: (253) 766-7549Contact Kim Parker QWest Corporation 931 14th St, Suite 1000A Denver, CO 80202 B: (303) 992-0752Contact Jesse Patjens CenturyLink / Lumen 23315 66th Ave S Kent, WA 98032 Contact Michael Smith North Sky Communications 21320 84th Ave S Kent, WA 98032 C: (206) 305-5881Contractor Business License Number: 36846Construction Contractor: NORTHSC857Q4 CITY OF RENTON ROW 1055 S Grady Way Renton, WA 98057-3232 Owner QWest/Century Link - Billing 23315 66th Ave S Kent, WA 98032 Specialized Billing General Conditions & Signature Permission is hereby given for the work described on this permit according to the conditions hereon and according to the approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton. Ÿ This permit and plans must be posted at the job site at all times.Ÿ I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to Renton Trench Restoration and Street Overlay Requirements. Ÿ Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY work in the Right of Way. Ÿ Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010) (Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission pipeline company prior to performing any construction or excavation activities. This requirement to consult with the transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122. Ÿ (Date)(Signature) Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. DEPARTMENT OF PUBLIC WORKS Page 1 of 3 | Published: 10/27/2021 Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380 Website: rentonwa.gov TRAFFIC CONTROL PLAN APPLICATION Published: 10/27/2021 TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK. The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted within the city's right-of-way. 1. Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents. 2. The following items are all required for submittal of the TCP Application: ☐Electronic Copy of the TCP Application ☐Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall: Include map(s) showing the location of the project and work area. Be legible lettering and clear, contrasting, symbols of viewing or printing. Must indicate street names, and north arrow and scale. Types of plans required: o Work hour plan – show all mobility impacts during construction hours. o Non-work plan - show all mobility impacts after work hours when limited or no work is happening in the right-of-way (ROW), if applicable. o Changing construction phases – show construction sequence and each construction phase change even if the traffic control is not modified, if applicable. o Pedestrian access/detour plan, if applicable. - Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the Evergreen Safety Council. 3. Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].” Project Name: Permit #: Site Address: Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________ Construction Company: Contact Name: Phone/Cell: _________________________ Business Address: City/State: Zip: Description of Work: Approval By: _________________________________________________ Date:____________________ Transportation Engineering Northsky Communications Tawnya Longfellow 22517 88th ave S Kent/WA 98031 P.062242 18408 116th Ave SE, Renton, WA 98058 6/11 7/11 425 615 7121 Lumen to access HH11602A and HH18800 for new fiber placement. MFP23002493 Monday - Friday 8:00AM - 3:00PM Scott Warlick CED 5/22/2023 Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 2 of 3 | Published: 10/27/2021 PERMIT HOLDER AGREES TO ALL THE FOLLOWING: Must have approved Traffic Control Plan (TCP) prior to commencing the work. Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time, with the least possible inconvenience or delay to pedestrians. WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the traveled way. Comply with all traffic regulations of the City of Renton and the State of Washington. Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control Devices. Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures. Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public transit, to be affected by a temporary lane or road closure a minimum of five business days (excluding weekends and holidays) prior to starting any work. Contractor or entity must notify King County Metro in writing at construction.coord@kingcounty.gov a minimum of five business days (excluding weekends and holidays) prior to starting any work impacting bus stops, a temporary lane or road closure. Work requiring removing a bus shelter or sign requires notification in writing a minimum of 30 business days (excluding weekends and holidays). Please call King County Metro at 206-477-1140 with any questions. Any lane or street closures not in conformance with the approved traffic control plan and/or without notification of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes. Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all costs of defense and attorney’s fees incurred in defending against same, arising from and related to implementation of the approved traffic control plans including claims arising from towing of private vehicles and the acts of the Permit Holder’s agents and employees. The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable attorney’s fees and litigation costs incurred resulting from such claim. In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for legal counsel chosen by the City to defend against same. Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or pedestrian safety or travel. All permit conditions shall be met. NOTES: Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council. Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD) and shown by a traffic control plan layout or reference to WSDOT. Approved Temporary Traffic Control Plan must be at the work site during work hours. Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or walkway is impeded to safely redirect pedestrians around a work zone. Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery road conditions during work and non-work hours. Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous place on the vehicle or equipment. Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 3 of 3 | Published: 10/27/2021 In the case of Temporary No Parking Zones, all the following apply in addition to previous: Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for vacate parking or curb lane usage. Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block seventy-two (72) hours in advance of effective date and time. The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the project site. Temporary traffic control devices must be removed immediately when work is done or no construction activities are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555 NE 2nd Street). I certify that the information on this application and within the submittal documents are accurate to the best of my knowledge and I acknowledge all the requirements on this application. Applicant’s Signature Date Applicant’s Name (Print) Austin Sweeney Austin Sweeney 5/11/2023 ADVANCE WARNING ARROW PANEL SHIFTING TAPER = 1/2 L SHOULDER TAPER = 1/3 L ≤ 40 MPH L=WS² 60 ≥ 45 MPH L=WSS = SPEED (MPH) L = TAPER LENGTH (FT.) W = WIDTH OF LATERAL SHIFT (FT.) BUFFER LENGTH GENERAL NOTES 1. PROJECTS WITH AN EXISTING SPEED LIMIT GREATER THAN 55 MPH MAY TEMPORARILY REDUCE BY 10 MPH OR TO 55 MPH, WHICHEVER IS LOWER, WITH THE CONCURRENCE FROM THE CHIEF TRAFFIC OPERATIONS ENGINEER. ANY TEMPORARY REDUCTIONS TO A SPEED LOWER THAN 55 MPH MAY BE REDUCED WITH CONCURRENCE FROM THE CHIEF TRAFFIC OPERATIONS ENGINEER AND A RECOMMENDATION FORWARDED BY TRAFFIC OPERATIONS TO THE DIRECTOR FOR APPROVAL. 2. THE W1-3 SIGNS SHALL BE USED WHEN THE RECOMMENDED SPEED ON A CURVE IS 30 MPH OR LESS, THE W1-4 SIGNS SHALL BE USED WHEN THE RECOMMENDED SPEED IS 35 MPH OR GREATER. 3. THE W6-3 AND R4-1 SIGNS SHALL BE INSTALLED ALTERNATELY AT 0.5 MILE INTERVALS WHEN THE LENGTHS OF CROSSOVERS EXCEED 0.5 MILE. 4. ALL REGULATORY SIGNS (R SERIES) SHALL BE BLACK ON RETRO REFLECTIVE WHITE. 5. ALL WARNING SIGNS (W SERIES) SHALL BE BLACK ON RETRO REFLECTIVE ORANGE. 6. WARNING SIGNS SHALL BE A MINIMUM OF 3'x3' FOR TOP SPEEDS OF 45 MPH OR LESS, R2-1 SHALL BE 4'x5'. 7. WARNING SIGNS SHALL BE A MINIMUM OF 4'x4' FOR SPEEDS OF 50 MPH OR GREATER, R2- SHALL BE 4'x5'. 8. ALL DEVICE SPACING SHALL BE DESIGNED BASED ON WORK ZONE SPEEDS SCOPE OF WORK THIS TRAFFIC CONTROL PLAN IS FOR THE FOLLOWING ROAD ENROACHMENTS IN CITY OF #### RIGHT OF WAY. WORK LOCATION: 18329 116TH AVE SE, RENTON, WA 98058, USA 253 766 7549 AUSTIN SWEENEY CITY OF RENTON HH 11602A HH 18800 MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS HH 11602A 100'NTS100'NTS100' NTS 100' NTS 100' NTS 100' NTS 100' NTS 100'NTSWORKAREA100'TANGENT50' -100'FLAGGINGTAPER50'TANGENT50' - 100'FLAGGINGTAPER12' MIN C9A (CA) ROADWORK AHEAD W20-1 ROADWORKAHEAD W20-1 ROADWORK AHEAD W20-1 C9A (CA) C9A (CA) C9A (CA) C9A (CA)25'MAXFLAGGER FLAGGER FLAGGER FLAGGER SE 184TH ST 25 MPH SE 184TH ST 25 MPH 115TH PL SE25 MPH12' MIN 25'MAX1. CONTRACTORS SHALL MAINTAIN ALL BUSINESS AND RESIDENTIAL ACCESS. 2. CONTRACTORS SHALL MAINTAIN ACCESS FOR ALL EMERGENCY VEHICLES. 3. "NO PARKING" SIGNS TO BE PLACED AS NEEDED 24 HOURS IN ADVANCE. 4. CONTRACTOR WILL GRADE AND MAINTAIN 12', DUST FREE TRAVEL LANES IN ALL DETOUR ROUTES UNLESS OTHERWISE NOTED. 5. ALL DEVICES WILL BE SETUP IN ACCORDANCE WITH THE MUTCD / N-DOT STANDARDS AND DEVICES WILL HAVE HIGH INTENSITY SHEETING. 6. CONTRACTOR WILL PLATE AND BACKFILL, PLACE BARRIER RAILS OR NON-CLIMB FENCE AROUND ANY OPEN EXCAVATION DURING NON-WORKING HOURS. 7. ALL EXCAVATIONS WITHIN 18' OF THE TRAVEL LANE DEEPER AND WIDER THAN 1' HAVING LESS THAN 4:1 SLOPE REQUIRE BARRIER RAIL. 8. UNPAVED DETOURS SHALL ONLY BE ALLOWED FOR 72 HOURS MAX. 9. CONTRACTORS SHALL MAINTAIN A SAFE PED. ROUTE 10. ALL TRAFFIC CONTROL MUST COMPLY WITH NRS-484. CONTRACTORS NOTES 28"(11cm)TRAFFIC CONES W/13"(5cm) REFLECTIVE SLEEVE FOR DAY/NIGHT USE OR DELINEATORS IF DAY USE ONLY TRAFFIC CONE WITH CLIP ON SIGN PROPOSED SIGN AND POST SIGNALIZED INTERSECTION FLASHING ARROWBOARD TYPE II BARRICADE W/O SIGN (3'H x 2'W) TYPE III BARRICADE W/SIGN (5'H x 4'W) HIGH LEVEL WARNING DEVICE WITH SIGN FLAGGER TOW AWAY NO STOPPING ANY TIME WORK ZONE LIMITS DIRECTION OF TRAFFIC TANSAT LEGEND S EXISTING DRIVEWAY SCALE 253 766 7549 AUSTIN SWEENEY MATCH TO SHEET - 02 MATCH TO SHEET - 03 MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS 100'NTS100'NTS100'NTSROAD WORK AHEAD W20-1 BEPREPAREDTO STOP W3-4 ONE LANE ROADAHEAD W20-4 116TH AVE SE25 MPH1. CONTRACTORS SHALL MAINTAIN ALL BUSINESS AND RESIDENTIAL ACCESS. 2. CONTRACTORS SHALL MAINTAIN ACCESS FOR ALL EMERGENCY VEHICLES. 3. "NO PARKING" SIGNS TO BE PLACED AS NEEDED 24 HOURS IN ADVANCE. 4. CONTRACTOR WILL GRADE AND MAINTAIN 12', DUST FREE TRAVEL LANES IN ALL DETOUR ROUTES UNLESS OTHERWISE NOTED. 5. ALL DEVICES WILL BE SETUP IN ACCORDANCE WITH THE MUTCD / N-DOT STANDARDS AND DEVICES WILL HAVE HIGH INTENSITY SHEETING. 6. CONTRACTOR WILL PLATE AND BACKFILL, PLACE BARRIER RAILS OR NON-CLIMB FENCE AROUND ANY OPEN EXCAVATION DURING NON-WORKING HOURS. 7. ALL EXCAVATIONS WITHIN 18' OF THE TRAVEL LANE DEEPER AND WIDER THAN 1' HAVING LESS THAN 4:1 SLOPE REQUIRE BARRIER RAIL. 8. UNPAVED DETOURS SHALL ONLY BE ALLOWED FOR 72 HOURS MAX. 9. CONTRACTORS SHALL MAINTAIN A SAFE PED. ROUTE 10. ALL TRAFFIC CONTROL MUST COMPLY WITH NRS-484. CONTRACTORS NOTES 28"(11cm)TRAFFIC CONES W/13"(5cm) REFLECTIVE SLEEVE FOR DAY/NIGHT USE OR DELINEATORS IF DAY USE ONLY TRAFFIC CONE WITH CLIP ON SIGN PROPOSED SIGN AND POST SIGNALIZED INTERSECTION FLASHING ARROWBOARD TYPE II BARRICADE W/O SIGN (3'H x 2'W) TYPE III BARRICADE W/SIGN (5'H x 4'W) HIGH LEVEL WARNING DEVICE WITH SIGN FLAGGER TOW AWAY NO STOPPING ANY TIME WORK ZONE LIMITS DIRECTION OF TRAFFIC TANSAT LEGEND S EXISTING DRIVEWAY SCALE MATCH TO SHEET - 01 253 766 7549 AUSTIN SWEENEY MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS 100'NTS100'NTS100'NTSBEPREPARED TO STOP W3-4 ONE LANE ROADAHEAD W20-4 ROADWORKAHEAD W20-1116TH AVE SE25 MPH1. CONTRACTORS SHALL MAINTAIN ALL BUSINESS AND RESIDENTIAL ACCESS. 2. CONTRACTORS SHALL MAINTAIN ACCESS FOR ALL EMERGENCY VEHICLES. 3. "NO PARKING" SIGNS TO BE PLACED AS NEEDED 24 HOURS IN ADVANCE. 4. CONTRACTOR WILL GRADE AND MAINTAIN 12', DUST FREE TRAVEL LANES IN ALL DETOUR ROUTES UNLESS OTHERWISE NOTED. 5. ALL DEVICES WILL BE SETUP IN ACCORDANCE WITH THE MUTCD / N-DOT STANDARDS AND DEVICES WILL HAVE HIGH INTENSITY SHEETING. 6. CONTRACTOR WILL PLATE AND BACKFILL, PLACE BARRIER RAILS OR NON-CLIMB FENCE AROUND ANY OPEN EXCAVATION DURING NON-WORKING HOURS. 7. ALL EXCAVATIONS WITHIN 18' OF THE TRAVEL LANE DEEPER AND WIDER THAN 1' HAVING LESS THAN 4:1 SLOPE REQUIRE BARRIER RAIL. 8. UNPAVED DETOURS SHALL ONLY BE ALLOWED FOR 72 HOURS MAX. 9. CONTRACTORS SHALL MAINTAIN A SAFE PED. ROUTE 10. ALL TRAFFIC CONTROL MUST COMPLY WITH NRS-484. CONTRACTORS NOTES 28"(11cm)TRAFFIC CONES W/13"(5cm) REFLECTIVE SLEEVE FOR DAY/NIGHT USE OR DELINEATORS IF DAY USE ONLY TRAFFIC CONE WITH CLIP ON SIGN PROPOSED SIGN AND POST SIGNALIZED INTERSECTION FLASHING ARROWBOARD TYPE II BARRICADE W/O SIGN (3'H x 2'W) TYPE III BARRICADE W/SIGN (5'H x 4'W) HIGH LEVEL WARNING DEVICE WITH SIGN FLAGGER TOW AWAY NO STOPPING ANY TIME WORK ZONE LIMITS DIRECTION OF TRAFFIC TANSAT LEGEND S EXISTING DRIVEWAY SCALE MATCH TO SHEET - 01 253 766 7549 AUSTIN SWEENEY MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS HH 18800 155'BUFFER SPACE45'SHOULDERTAPER100'NTS100'NTS100'NTS100' NTSWORKAREA25'MAX12' MIN ROAD WORK AHEAD W20-1 SHOULDERCLOSED C30-A SHOULDERCLOSED C30-A ROADWORKAHEAD W20-1 ROAD WORKAHEAD W20-1 100' NTS ROADWORKAHEAD W20-1 SE 188TH ST 25 MPH SE 188TH ST 25 MPH 116TH AVE SE25 MPH116TH AVE SE25 MPHSHOULDERWORK W21-5 1. CONTRACTORS SHALL MAINTAIN ALL BUSINESS AND RESIDENTIAL ACCESS. 2. CONTRACTORS SHALL MAINTAIN ACCESS FOR ALL EMERGENCY VEHICLES. 3. "NO PARKING" SIGNS TO BE PLACED AS NEEDED 24 HOURS IN ADVANCE. 4. CONTRACTOR WILL GRADE AND MAINTAIN 12', DUST FREE TRAVEL LANES IN ALL DETOUR ROUTES UNLESS OTHERWISE NOTED. 5. ALL DEVICES WILL BE SETUP IN ACCORDANCE WITH THE MUTCD / N-DOT STANDARDS AND DEVICES WILL HAVE HIGH INTENSITY SHEETING. 6. CONTRACTOR WILL PLATE AND BACKFILL, PLACE BARRIER RAILS OR NON-CLIMB FENCE AROUND ANY OPEN EXCAVATION DURING NON-WORKING HOURS. 7. ALL EXCAVATIONS WITHIN 18' OF THE TRAVEL LANE DEEPER AND WIDER THAN 1' HAVING LESS THAN 4:1 SLOPE REQUIRE BARRIER RAIL. 8. UNPAVED DETOURS SHALL ONLY BE ALLOWED FOR 72 HOURS MAX. 9. CONTRACTORS SHALL MAINTAIN A SAFE PED. ROUTE 10. ALL TRAFFIC CONTROL MUST COMPLY WITH NRS-484. CONTRACTORS NOTES 28"(11cm)TRAFFIC CONES W/13"(5cm) REFLECTIVE SLEEVE FOR DAY/NIGHT USE OR DELINEATORS IF DAY USE ONLY TRAFFIC CONE WITH CLIP ON SIGN PROPOSED SIGN AND POST SIGNALIZED INTERSECTION FLASHING ARROWBOARD TYPE II BARRICADE W/O SIGN (3'H x 2'W) TYPE III BARRICADE W/SIGN (5'H x 4'W) HIGH LEVEL WARNING DEVICE WITH SIGN FLAGGER TOW AWAY NO STOPPING ANY TIME WORK ZONE LIMITS DIRECTION OF TRAFFIC TANSAT LEGEND S EXISTING DRIVEWAY SCALE 253 766 7549 AUSTIN SWEENEY MFP23002493 © 2023 Mi croso ft Co rpora tion © 20 23 Maxa r ©CNES (2 023) Di st ribu tio n A irbu s DS MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS MFP23002493 © 2023 Microsoft Corporation © 2023 Maxar ©CNES (2023) Distribution Airbus DS MFP23002493