HomeMy WebLinkAboutMFP23004209.pdfDEPARTMENT OF COMMUNITY
AND ECONOMIC DEVELOPMENT
Minor Franchise Permit: MFP23004209
IVR Number: 23004209
Permit Information
Permit Name: Puget Sound Energy - Electric
Address/Location:08/14/2023Application Date:7236500035Parcel Number: 2908 NE 4TH ST
Permit Type:08/21/2023Issue Date:Franchise
Permit Work Class:08/20/2024Expiration Date:Minor Utility
Job Number: 101165233Franchise Type:Electric
Description: Puget Sound Energy Electric CREW TO PARK IN ROW AT P01 (318115 166752) AND REPLACE EXISTING OH
SECONDARY WIRE WITH NEW OH SECONDARY WIRE TO P02 (318120 166750). NO HS CUTS ANTICIPATED.
TREE TRIMMING NEEDED AT P01. RESTORATION PER CITY OF RENTON STANDARDS.
Contacts
Name Address PhoneTypeBilling
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031ApplicantX
Vicki Henson
Potelco Inc
8001 212th St S
Kent, WA 98032
B: (253) 863-0484Contractor
Business License Number: 5109Electrical Contractor: POTELI*344O4
Construction Contractor: POTELI*227PL
Puget Sound Energy Inc 10885 NE 4th Street, PSE08-N08
Bellevue, WA 98009
B: (888) 225-5773Emergency
Contact
CITY OF RENTON ROW 1055 S Grady Way
Renton, WA 98057-3232
Owner
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031Specialized
Billing
General Conditions & Signature
Permission is hereby given for the work described on this permit according to the conditions hereon and according to the
approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton.
Ÿ
This permit and plans must be posted at the job site at all times.Ÿ
I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to
Renton Trench Restoration and Street Overlay Requirements.
Ÿ
Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY
work in the Right of Way.
Ÿ
Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ
In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010)
(Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission
pipeline company prior to performing any construction or excavation activities. This requirement to consult with the
transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122.
Ÿ
(Date)(Signature)
Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
DEPARTMENT OF PUBLIC WORKS
Page 1 of 3 | Published: 10/27/2021
Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380
Website: rentonwa.gov
TRAFFIC CONTROL PLAN APPLICATION
Published: 10/27/2021
TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION
FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK.
The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control
plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted
within the city's right-of-way.
1. Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents.
2. The following items are all required for submittal of the TCP Application:
☐Electronic Copy of the TCP Application
☐Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall:
Include map(s) showing the location of the project and work area.
Be legible lettering and clear, contrasting, symbols of viewing or printing.
Must indicate street names, and north arrow and scale.
Types of plans required:
o Work hour plan – show all mobility impacts during construction hours.
o Non-work plan - show all mobility impacts after work hours when limited or no work is
happening in the right-of-way (ROW), if applicable.
o Changing construction phases – show construction sequence and each construction phase
change even if the traffic control is not modified, if applicable.
o Pedestrian access/detour plan, if applicable.
- Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the
Evergreen Safety Council.
3. Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].”
Project Name: Permit #:
Site Address:
Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________
Construction Company:
Contact Name: Phone/Cell: _________________________
Business Address: City/State: Zip:
Description of Work:
Approval By: _________________________________________________ Date:____________________
Transportation Engineering
PLEASE SEE ATTACHED
POTELCO, INC
6905 S 228TH ST KENT, WA 98032
101165233
2908 NE 4th ST
JASON SCHAEFER 425-320-6926
MFP23004209
Monday - Friday 8:00AM - 3:00PM
Scott Warlick CED 8/21/2023
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 2 of 3 | Published: 10/27/2021
PERMIT HOLDER AGREES TO ALL THE FOLLOWING:
Must have approved Traffic Control Plan (TCP) prior to commencing the work.
Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time,
with the least possible inconvenience or delay to pedestrians.
WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the
traveled way.
Comply with all traffic regulations of the City of Renton and the State of Washington.
Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street
and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control
Devices.
Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures.
Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public
transit, to be affected by a temporary lane or road closure a minimum of five business days (excluding weekends
and holidays) prior to starting any work.
Contractor or entity must notify King County Metro in writing at construction.coord@kingcounty.gov a minimum
of five business days (excluding weekends and holidays) prior to starting any work impacting bus stops, a
temporary lane or road closure. Work requiring removing a bus shelter or sign requires notification in writing a
minimum of 30 business days (excluding weekends and holidays). Please call King County Metro at 206-477-1140
with any questions.
Any lane or street closures not in conformance with the approved traffic control plan and/or without notification
of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at
thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes.
Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all
costs of defense and attorney’s fees incurred in defending against same, arising from and related to
implementation of the approved traffic control plans including claims arising from towing of private vehicles and
the acts of the Permit Holder’s agents and employees.
The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in
such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable
attorney’s fees and litigation costs incurred resulting from such claim.
In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for
legal counsel chosen by the City to defend against same.
Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or
pedestrian safety or travel.
All permit conditions shall be met.
NOTES:
Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council.
Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD)
and shown by a traffic control plan layout or reference to WSDOT.
Approved Temporary Traffic Control Plan must be at the work site during work hours.
Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or
walkway is impeded to safely redirect pedestrians around a work zone.
Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery
road conditions during work and non-work hours.
Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company
logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous
place on the vehicle or equipment.
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 3 of 3 | Published: 10/27/2021
In the case of Temporary No Parking Zones, all the following apply in addition to previous:
Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for
vacate parking or curb lane usage.
Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block
seventy-two (72) hours in advance of effective date and time.
The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the
project site.
Temporary traffic control devices must be removed immediately when work is done or no construction activities
are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555
NE 2nd Street).
I certify that the information on this application and within the submittal documents are accurate to the best of my
knowledge and I acknowledge all the requirements on this application.
Applicant’s Signature Date
Applicant’s Name (Print)
CORRIE RYDBERG
DRIVEWAYDRIVEWAYPLEASE SCHEDULE
WITH DISPATCH
@ 800-343-4049 OPT.1
AND PROVIDE A
COPY OF THE APPROVED
TRAFFIC CONTROL PLAN
K&D Services, as the preparer of this traffic control plan makes no representation as to its' general adequacy or being approved for implementation. Approval must result from the Traffic Engineer or other Public Official having statutory enforcement authority
in the jurisdiction. Utilization and implementation of this plan shall be a result of that approval. Ref. MUTCD 2009 6A-01 (10)
P02NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
ONE LANEROADAHEAD
ROADWORK
AHEAD
BE PREPAREDTO STOP
ROADWORKAHEAD
100'+/-100'+/-100'+/-100'+/-ROADWORKAHEAD
OFFICE: 800-343-4049
DIRECT: 425-923-9086
WATCP@KNDSERVICES.NET
CUSTOMER:
CONTACT:
LOCATION:
DATE:W/O #
JASON SCHAEFER
425-320-6926
08/07/23
DESIGNED BY: WHITNEY PATERNO
WSTCS#012693
5144167541
...
2908 NE 4TH ST
RENTON, WA 98056
Notes:
1.Maintain ped. access to
and through crosswalks
2.Maintain Min. 10' lanes
3.Maintain local access
4.Notify Transit Authority
at least 48 hrs. in advance
of bus stop closure
5.Traffic control plan and all
devices shall comply with
MUTCD, PROWAG & WSDOT
6.DEVICE SPACING
Flag Taper 20'
Signs per WSDOT
Tapers per WSDOT
7.28" Cones
36" Barrels
48" Signs
24" Paddle
8. Adjust to field conditions
PAGE 1 OF 2
NE 4TH ST INDEX PL NENE 4TH ST STOPSTOP JEFFERSON AVE NEV01BUSINESSENTRANCEP01
SIDEWALK
CLOSED
SIDEWALKCLOSEDSIDEWALK CLOSED
CROSS HERE
DETOUR
DETOUR
DETOUR
DETOUR
Legend
Cone
ONE LANEROADAHEAD CW20-4 one lane road ahead
Flagger
DETOUR M4-9b detour for peds
DETOUR M4-9b detour for peds (R)
NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 No Parking R7-T39
Pole
SIDEWALKCLOSED R9-9 R9-9
SIDEWALK CLOSED
CROSS HERE R9-11a(L) Sidewalk Closed, Cross Here R9-11a(L)
SIDEWALK CLOSED
CROSS HERE R9-11a(R) Sidewalk Closed, Cross Here R9-11a(R)
ROADWORKAHEAD W20-1 road work ahead
W20-7A Flagger Ahead
BE PREPAREDTO STOP W20-7b be prepared to stop
Work Area
BE PREPARED
TO STOP
BE
PREPARED
TO STOP
ROAD
WORKAHEAD100'+/-SIDEWALK CLOSED
CROSS HERE
SPOTTER TO BE PLACED AT ANY OPEN DRIVEWAYS
LOCATED IN THE WORK ZONE. TO ASSIST DRIVEWAY
TRAFFIC OUT OF WORK ZONE.
MAINTAIN DRIVEWAY ACCESS. IF UNABLE TO NOTIFYHOMEOWNERS OF TEMPORARY CLOSURE.
PLACE NO PARKS 72 HOURS IN ADVANCE OF WORK
BEING DONE.
FLAGGERS WILL NEED TO HOLD TRAFFIC IN EACH
DIRECTION FOR WIRE DROP. NO MORE THAN 5 MINS
SPEEDLIMIT25SPEEDLIMIT
25
SPEEDLIMIT251
0
0
'
+
/
-
www.invarion.com
MFP23004209
DRIVEWAYDRIVEWAYPLEASE SCHEDULE
WITH DISPATCH
@ 800-343-4049 OPT.1
AND PROVIDE A
COPY OF THE APPROVEDTRAFFIC CONTROL PLAN
K&D Services, as the preparer of this traffic control plan makes no representation as to its' general adequacy or being approved for implementation. Approval must result from the Traffic Engineer or other Public Official having statutory enforcement authority in the jurisdiction. Utilization and implementation of this plan shall be a result of that approval. Ref. MUTCD 2009 6A-01 (10)
P02
ONE LANEROAD
AHEAD
ROADWORKAHEAD
BE PREPAREDTO STOP
ROAD
WORKAHEAD
100'+/-100'+/-100'+/-100'+/-ROADWORKAHEAD
OFFICE: 800-343-4049
DIRECT: 425-923-9086
WATCP@KNDSERVICES.NET
CUSTOMER:
CONTACT:
LOCATION:
DATE:W/O #
JASON SCHAEFER
425-320-6926
08/07/23
DESIGNED BY: WHITNEY PATERNO
WSTCS#012693
5144167541
...
2908 NE 4TH ST
RENTON, WA 98056
Notes:
1. Maintain ped. access to
and through crosswalks
2. Maintain Min. 10' lanes
3. Maintain local access
4. Notify Transit Authority
at least 48 hrs. in advance
of bus stop closure
5. Traffic control plan and all
devices shall comply with
MUTCD, PROWAG & WSDOT
6. DEVICE SPACING
Flag Taper 20'
Signs per WSDOT
Tapers per WSDOT
7. 28" Cones
36" Barrels
48" Signs
24" Paddle
8. Adjust to field conditions
PAGE 2 OF 2
NE 4TH ST INDEX PL NENE 4TH ST STOPSTOP JEFFERSON AVE NEV01BUSINESSENTRANCEP01
Legend
Cone
ONE LANEROADAHEAD CW20-4 one lane road ahead
Flagger
DETOUR M4-9b detour for peds
DETOUR M4-9b detour for peds (R)
NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 No Parking R7-T39
Pole
SIDEWALKCLOSED R9-9 R9-9
SIDEWALK CLOSEDAHEAD
CROSS HERE R9-11(R) Sidewalk Closed Ahead, Cross Here R9-11(R)
SIDEWALK CLOSED
CROSS HERE R9-11a(L) Sidewalk Closed, Cross Here R9-11a(L)
Spotter
ROADWORKAHEAD W20-1 road work ahead
W20-7A Flagger Ahead
BE PREPAREDTO STOP W20-7b be prepared to stop
Work Area
BE PREPAREDTO STOP
BE PREPAREDTO STOP
ROADWORKAHEAD
SPOTTER TO BE PLACED AT ANY OPEN DRIVEWAYS
LOCATED IN THE WORK ZONE. TO ASSIST DRIVEWAY
TRAFFIC OUT OF WORK ZONE.
MAINTAIN DRIVEWAY ACCESS. IF UNABLE TO NOTIFY
HOMEOWNERS OF TEMPORARY CLOSURE.
PLACE NO PARKS 72 HOURS IN ADVANCE OF WORK
BEING DONE.
MAINTAIN ACCESS TO BUSINESS.SPEEDLIMIT25SPEEDLIMIT25
SIDEWALK CLOSED
CROSS HERE100'+/-SPEEDLIMIT
25
NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555
SIDEWALKCLOSED
SIDEWALK CLOSEDAHEAD
CROSS HERE
DETOUR
DETOUR100'+/-DETOUR DETOUR
1
00
'
+
/
-
www.invarion.com
MFP23004209
447 409
29202914402
INDEX PL NENE 4TH ST
2908
60'
ROW
60'
ROW
AØ45264
318114-166747
25KVA 120/240V (A)
37.5KVA 120/240V (A)
AØ45261
BØ45262
CØ45263
PRE
12
318114-166746
318120-166750
318115-166752
22'
J
10'
10'
60'
ROW
22'
NE 4TH ST
25'
40'
SITE PLAN
POWER GENERAL NOTES - RESIDENTIAL PROJECT
N
Vicinity Map
47.4885, -122.1796
FOREMAN (CHECK BOX WHEN COMPLETED)
PSE Equipment LOCKED/SECURED & Work Area left in CLEAN/SAFE Condition.
Grid, Cable, and Switch numbers INSTALLED & VERIFIED.
Field Changes RED-LINED on As-built.
Indicate correct FUSE SIZE on As-built & VERIFY proper PHASE.
Foreman's Signature _______________________________________________
Print Name ___________________________________ Date ______________
Material VERIFIED and CHANGES noted on Paperwork.
Total PRIMARY Cable noted on As-built.
Company ID#'s RECORDED in correct location on As-built.
Deviations noted on the As-built and their reason.
I certify that the work performed meets PSE's standards and procedures
and that all quality requirements are met.
10.
7.
6.
5.
4.
3.
2.
1.All materials to be installed in accordance with Puget Sound Energy's (PSE) standards. Any deviation from
this work sketch must be AUTHORIZED by PSE's Project Manager and NOTED on the Foremans' Copy.
All switching arrangements and/or outage arrangements are to be made with the Project Manager at least
three (3) working days in advance.
Contact the Utilities Underground Location Center (1-800-424-5555) at least 48 hours prior to commencing
work to get the underground facilities located.
STAKING: The customer will provide all staking (transformer, handhole, trench, grade, lot, pole, sidewalk,
etc.). See sketch and details for locations. Equipment locations must be approved by the Project Manager.
SITE PREPARATION: The work area will be at or near finished grade, clear of trench spoils or construction
materials which would restrict construction and/or equipment access, before work can begin.
Roads shall be paved or have a compacted , crushed rock base in place.
CLEARANCES: Transformers require a minimum of 6 feet from fire fighting equipment, 10 feet from
combustible walls, overhangs, doors, and windows, and a minimum of 5 feet from the back of curb (or guard
posts will be required per PSE standards). All conduits and vaults are to be at least 5 feet away from water,
storm and sewer lines when paralleling them in the right of way, and at least 1 foot when crossing them.
All work is to be done in accordance with local municipal and county permit requirements as applicable.
Inclement weather conditions may cause delays in construction times and dates.
EXCAVATION: The customer is to provide all trenching, backfill, vault excavations, compaction and
restoration per this sketch and per PSE standards. A minimum protective cover of 36" is required over
PSE's primary voltage equipment and 24" is required of PSE's secondary voltage equipment. The customer
will provide any and all shoring or they will side slope the trench to 1:1.
8.
9.
SCALE: 1" = 50'101165233THIS SKETCH NOT TO BE RELIED UPON FOR EXACT LOCATION OF EXISTING FACILITIES
CALL 811 TWO BUSINESS DAYS BEFORE YOU DIG
For contacts below dial 1-888-CALL PSE (225-5773)
CUSTOMER DEVELOPMENT NOTES:
A PRE CONSTRUCTION MEETING IS REQUIRED WITH YOUR PROJECT MANAGER PRIOR TO
STARTING ANY SITE WORK.
CUSTOMER IS RESPONSIBLE FOR ALL TRENCHING, SELECT BACKFILL, COMPACTION &
RESTORATION PER
PUGET SOUND ENERGY STANDARDS & LOCAL MUNICIPALITY.
**DEVELOPER NEEDS TO FOLLOW ALL TRENCH DETAILS ON SELECT BACKFILL**
CUSTOMER IS RESPONSIBLE FOR THE FOLLOWING:
VAULTS & WORK PITS.
-REQUIRED TO PROVIDE 4' X 4' WORK PIT AT V01
JOB SITE READINESS.
-JOB SITE NEEDS TO BE 100% READY FOR INSPECTION 5 BUSINESS DAYS PRIOR TO
CONSTRUCTION DATE.
-ALL WORK IN RIGHT OF WAY MUST BE COORDINATED WITH PROJECT MANAGER AND
LOCAL MUNICIPALITY.
-ALL TRENCH, AND LOCAL ELECTRICAL MUNICIPALITIES AKA "L&I, CITY", INSPECTIONS
MUST BE COMPLETED 5 BUSINESS DAYS PRIOR TO SCHEDULED CONSTRUCTION DATE.
-REQUIRED TO OPERATE AND PROVIDE EQUIPMENT TO PUMP OUT WATER FOR WORK
PITS, VAULTS & TRENCH AT ALL TIMES.
-REQUIRED TO HAVE EXCAVATION EQUIPMENT AND BE ON SITE THE DAY OF
CONSTRUCTION TO COMPLETE BACKFILLING.
-IF A SECOND INSPECTION IS REQUIRED, ADDITIONAL FEE'S WILL BE APPLIED.
-PLEASE REVIEW THE CITY OR KING COUNTY TRENCHING REQUIREMENTS UNDER THE
PERMIT.
-IF A PRE-CON IS REQUIRED BY THE CITY, COUNTY OR W.S. DOT A PSE PROJECT
MANAGER WILL SET-UP AND SCHEDULE A MEETING WITH THE MUNICIPALITY BEFORE ANY
EXCAVATION OR INSTALLATION BEGINS.
OVERHEAD CIRCUIT MAP 2305E088
SCALE: 6" = 1 MILE
CIRCUIT LOADING TABLE
AS OF
EXIST. PEAK LOAD
EST. NEW LOAD
TOTAL
CIRCUIT:
A PHASE B PHASE C PHASE
PRE-12
10/18/22
265 233 239
11.57 0 0
276.57 233 239
PSE
No
No
No
Yes
Yes
Yes
No
YesDeveloper
"Flagging Required"
"Outages Required"
"Locates Required"
UTILITIES
CONTACT
PHONE#
COUNTY
1/4 SEC
U-MAP NO (POWER)
OP MAP
Emer Sect Gas Wk Ctr POWER WK CTR
PLAT MAP
JOINT FACILITIES ARRANGEMENTS
DRAWN BY
CHECKED BY
APPROVED BY
FOREMAN #1
FOREMAN #2
MAPPING
INCIDENT MAOP
Gas Order Elect Order
SCALE PAGE
ENGR - POWER
ENGR - GAS
FUNCTION
PROJECT MGR
PERMITREAL ESTATE/EASEMENT
2
1
REV#
3
DATE DESCRIPTIONBY
CONTACT PHONE NO DATE
OH CKT MAP CIRCUIT NOUG CKT MAP
J. SCHAEFER 425-320-6926 2/15/23
K. TURNER 253-365-5577
N/A N/A N/A
K. TURNER 425-365-5577
RENTON
TOY SERVICE UPGRADE
PM XFMR UPG, OH SEC REPL, OH SVC REPL
2908 NE 4TH ST, PUYALLUP,WA 98373
N/A N/A
N/A XXX
AS NOTED 1/2
KING N/A CSPSKEPM
X 208.080 208.084
2305E062 2305E088 2305E062 PRE-12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
2/15/23
2/15/23
N/A
Owner / Developer Contact Info
officeATTN:
KRYS TOY
2908 NE 4TH ST
RENTON, WA 98056
KRYS TOY 206-388-7322
E-Mail:
Cell Phone:
Project Manager Contact Information:
Manager:JASON SCHAEFER
425-320-6926
jason.schaefer@pse.com
SCALE: NONE
PARTIAL XFMR & WIRE DETAL
CIRCUIT FEET ADDED: 55'
LRC:
% V. Drop:
% Flicker:
Sq. Footage:
Panel Size:
Heat Type:
Est. Demand:
1500 SQ.
200 AMPS
GAS
25KW
25A
2.3%
2.6%
JOB SITE
PSE INST. 1-RUN OH 1/0 TPX
TO OH SVC ± 95'
9
5
'
SITE SPECIFIC NOTES
AT V01: 318114-166747
-REMOVE (1) EXISTING 25KVA 120/240V TRF AND RETURN TO PSE YARD
-INSTALL (1) 37.5KVA PM TRF 120/240V (MID 6247050)
-INSTALL (3) 6-POS #6-350 KCMIL SECONDARY CONNECTION BLOCKS
(MID:4842001)
-INSTALL (1) 12KV ELBOW KIT PER STD 6041.1000 (ELB10J)
AT J01: 318114-166746
-EXISTING J-BOX TO REMAIN
-POTELCO TO DE-ENERGIZE AND RE-ENERGIZE PRIMARY CABLE (AØ45264)
TO TRF AT V01
AT P01: 318115-166752
-EXISTING 40' UNK POLE TO REMAIN
-REMOVE EXISTISTING OH 4/0 WIRE TO P02
-INSTALL NEW OH 4/0 TPX WIRE TO P02
AT P02: 318120-166750
-EXISTING 40' UNK POLE TO REMAIN
-TRANSFER EXISTING SERVICES (2) TO POLE.
M01 AT "2908":
-REMOVE EXISTING OH SERVICE
-INSTALL 95' OF NEW OH 1/0 TPX WIRE
-EXISTING 200A METER TO OH PERM METER BASE TO REMAIN
SPAN SPECIFIC NOTES
-SEE SITE PLAN, ONE-LINE DRAWING AND TABLES FOR NEW INSTALL*
WORKSITE
YES
HP Svc/MSA
Perm. Service
OH Misc. & Exp
Tfmr Removal
Superior
ORDER#NOTIF#
PWR
PROJECT PHASE
N/AN/A
N/A
N/A
N/A
N/A
514359467
N/A
CABLE TV
PHONE
Service Meter
101165233
101165234
514167541
514359467
OH Tfmr
OH Misc. & Exp
Svc Removal
N/A
N/A
N/A
00 1"2"
00 50'100'55'PSE INST. 1-RUN OH 4/0 TPX
SECONDARY MAIN ± 55'
3-12
Removed at site:
Grid Number:
kVA Rating:
Foreman to redline the following information
TRANSFORMER REMOVAL
Company ID#:
Primary phase connected to:
Tested Secondary Voltage
25kVA
V01
318114-166747
TRANSFORMER INSTALLATION (UG)
Primary phase connected to:
Tested Secondary Voltage
Foreman to redline the following information
37.5kVA
6247050
Installed at site:
Grid Number:
kVA Rating:
Material ID#:
V01
318114-166747
WIRE STRINGING
PRIMARY & SECONDARY
Location
Usage Wire Size & Type
Quantity
of wires
Length
(per wire)TotalFromTo
P01 P02 SEC SEC 4/0 OH TPX 1 55'1
P02 M01 SVC SEC 1/0 OH TPX 1 95'1
WIRE REMOVAL TABLE
Work
Location Wire Size & Type Quantity
Length
(per
conductor)
Remarks
From To
P01 P02 4/0 OH TPX 1 55'
P02 M01 1/0 OH TPX 1 95'
584050107
TOP VIEW
SIDE VIEW
EXCAVATION: 4-2/3 CUBIC YARDS
Rock
Crushed
6"
3'-6"
2"
6'
6'
48"42"
36"
38"
42"
Struts
VAULT & EXCAVATION DETAIL
Not to scale 6045.1000
1950 lbs
ARE TO BE INSTALLED, CROSS SECTION DETAILS OF THE TYPICAL EROSION
STRUCTURES, & SPECIAL REQUIREMENTS FOR WORK IN SENSITIVE AREAS.)
EROSION & SEDIMENT CONTROL REQUIREMENTS
NOTES DETAILING WHERE EROSION OR SEDIMENT CONTROL STRUCTURES
(LOCAL JURISDICTIONS MAY HAVE ADDITIONAL REQUIREMENTS INCLUDING
0150.3200 TECHNIQUES FOR TEMPORARY EROSION & SEDIMENT CONTROL
EROSION & SEDIMENT CONTROL SHALL BE PER PSE STANDARD PRACTICE
& ANY ADDITIONAL LOCAL JURISDICTION REQUIREMENTS.
SCALE: NONE
PARTIAL PLAN DETAL
3-13
3-3
108148922
N/A
RENTON, WA 98056
MFP23004209
RESTORATION PER CITY OF RENTON STANDARDS
101165233FLOW DIRECTION
LAY 8" BOTTOM SKIRT ON TOP OF NATIVE SOIL,
SECURE WITH PEA GRAVEL BAGS (MID 9995692).
6'
3'
8"
TECHNIQUES FOR EROSION AND SEDIMENT CONTROL
SILT FENCE DETAIL
Not to Scale 0150.3200
WHEN YOUR SERVICE
LINE EXCEEDS 125'SERVICE MAST
POWER POLE SECONDARY LINE(UTILITY OWNED)
WATER WELL
INTERMEDIATESERVICE POLE(UTILITY SET & OWNED)MAY BE REQUIRED
50' MIN 50' MIN
SERVICE LINE(UTILITY OWNED)
OVERHEAD SECONDARY CLEARANCE DETAIL
SCALE: NONE
MAST HEIGHT BELOW 26"
METER SURFACE MOUNTED, U-BOLTS SECURE MAST
SERVICE BRACKET
WEATHERHEAD
FLASHING
18" MIN18" MIN
24" MAX *FLASHING IN COURSESOF SHINGLES
MINIMUM 2" x 6" INSTALLED
SOLIDLY BETWEEN RAFTERSOR STUDS WITH HOLE
BORED FOR SNUG FIT
2" x 6" INSTALLED
SOLIDLY BETWEENRAFTERS AND AGAINSTROOF SHEATHING
RIGID STEELCONDUIT
STRUCTURAL
FRAMING
AND FINISHMATERIALS
STUD
GROUND
* ADDITIONAL SUPPORT GUYS REQUIRED FOR ATTACHMENTS GREATER
THAN 24" ABOVE ROOFLINE OR IF SERVICE LINE EXCEEDS 100' IN LENGTH
MAST HEIGHT BELOW 26"
METER SURFACE MOUNTED, GALVANIZED LAG BOLTS SECURE MAST
SERVICE BRACKET
WEATHERHEAD
FLASHING
FRONT VIEW
GALVANIZED LAG-BOLTINTO FRAMING MEMBER
HEAVY-WALLSTRUT-TYPECHANNELHEAVY-WALLSTRUT-TYPE
CHANNEL
18" MIN24" MAX *
SERVICE DROP
DETAIL
BLOCKING BETWEEN
MAST AND BUILDING
5/16" U-BOLTS
2" x 6" BACKING
SHIM METER
BASE/SOCKETAND FASTEN WITHSCREWS
FLUSHMETER
SOCKET
GROUND
RIGID STEEL
STRUCTURAL
FRAMING AND
FINISH MATERIALS
24" MAX *
SERVICE DROP
SERVICE BRACKET
FLASHING
MAST HEIGHT BELOW 26"
METER FLUSH MOUNTED
SERVICE DROP WEATHERHEAD
MINIMUM 2' x 6" BETWEEN
RAFTERS WITH HOLEBORED FOR SNUG FIT
RIGID STEEL CONDUIT
UN-GUYED SERVICE MAST DETAIL
SCALE: NONE
UTILITIES
CONTACT
PHONE#
COUNTY
1/4 SEC
U-MAP NO (POWER)
OP MAP
Emer Sect Gas Wk Ctr POWER WK CTR
PLAT MAP
JOINT FACILITIES ARRANGEMENTS
DRAWN BY
CHECKED BY
APPROVED BY
FOREMAN #1
FOREMAN #2
MAPPING
INCIDENT MAOP
Gas Order Elect Order
SCALE PAGE
ENGR - POWER
ENGR - GAS
FUNCTION
PROJECT MGR
PERMITREAL ESTATE/EASEMENT
2
1
REV#
3
DATE DESCRIPTIONBY
CONTACT PHONE NO DATE
OH CKT MAP CIRCUIT NOUG CKT MAP
J. SCHAEFER 425-320-6926 2/15/23
K. TURNER 253-365-5577
N/A N/A N/A
K. TURNER 425-365-5577
RENTON
TOY SERVICE UPGRADE
PM XFMR UPG, OH SEC REPL, OH SVC REPL
2908 NE 4TH ST, PUYALLUP,WA 98373
N/A N/A
N/A 101165233
AS NOTED 2/2
KING N/A CSPSKEPM
X 208.080 208.084
2305E062 2305E088 2305E062 PRE-12
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
2/15/23
2/15/23
N/A
E-Mail:
Cell Phone:
Project Manager Contact Information:
Manager:JASON SCHAEFER
425-320-6926
jason.schaefer@pse.com
N/A
POSSIBLE CUSTOMER
ENTRY LOCATION
POSSIBLE CUSTOMER
ENTRY LOCATION
PSE
POSSIBLE CUSTOMER
ENTRY LOCATION
CABLE INSTALLATION DIAGRAM L
Not to scale
COOLING
5' MIN
5' MIN
10' MIN
5'
MIN
FINS
ACCESS
CONCRETE PAD
MINIMUM CLEARANCES FOR PSE EQUIPMENT
CURB OR EDGE OF PAVEMENT
CURB OR EDGE OF PAVEMENT
5' MIN
ROAD OR
PARKING AREA
TYP. PAD
& TRANS-
FORMER
3'
MIN
3' MIN
3' MIN
DOOR
ACCESS
DOOR
REQUIRED
WORK SPACE
AREA
6775.0035 Not to scale
MFP23004209