Loading...
HomeMy WebLinkAbout234.30 (replaced 2020)Stormwater Pond This pond is in our care. Runoff is held here after storms. It is released slowly or stored until the next storm when it is replaced by incoming flows. This helps prevent downstream flooding and erosion and helps clean the water. For more information or to report littering, vandalism or other problems, call the City of Renton, Public Works Department, Maintenance Division at (425) 430-7400. Pond Name and GIS Facility ID Number SPECIFICATIONS: SIZE:48 INCHES BY 24 INCHES MATERIAL:0.125-GAUGE ALUMINUM FACE:HP-700-O PERM KR M ITEM #62200M - BEIGE VINYL OR APPROVED EQUAL; DOL 6060 - UV/ANTI-GRAFFITI CLEAR OVERLAY FILM. LETTERING:SILK SCREEN ENAMEL WHERE POSSIBLE, OR VINYL LETTERS. COLORS:BEIGE BACKGROUND, TEAL LETTERS. TYPE FACE:HELVETICA CONDENSED. TITLE: 3 INCH; SUB-TITLE: 1 1 2 - INCH; TEXT: 1 INCH; OUTER BORDER: 1 8 INCH BORDER DISTANCE FROM EDGE: 1 4 - INCH; ALL TEXT 1 3 4 - INCH FROM BORDER. POSTS:PRESSURE TREATED, BEVELED TOPS, 1 2 - INCH HIGHER THAN SIGN INSTALLATION:SECURE TO CHAIN LINK FENCE IF AVAILABLE. OTHERWISE INSTALL TWO 4"X4" POSTS, PRESSURE TREATED, MOUNTED ATOP A GRAVEL BED, INSTALLED IN 30-INCH CONCRETE FILLED POST HOLES (8-INCH MINIMUM DIAMETER), WITH THE TOP SIGN NO HIGHER THAN 42 INCHES FROM GROUND SURFACE. PLACEMENT:FACE SIGN IN DIRECTION OF PRIMARY VISUAL OR PHYSICAL ACCESS. DO NOT BLOCK ANY ACCESS ROAD. DO NOT PLACE WITHIN 6 FEET OF STRUCTURAL FACILITIES (E.G. MANHOLES, SPILLWAYS, PIPE INLETS). POND NAME AND GIS FACILITY ID NUMBER: TO BE PROVIDED BY THE CITY DURING THE CONSTRUCTION PLAN APPROVAL. POND NAME IS THE NAME OF THE PROJECT ON THE APPROVED CIVIL CONSTRUCTION PLANS. NOTE: IF THE FACILITY HAS A LINER TO RESTRICT INFILTRATION OF STORMWATER, THE FOLLOWING NOTE MUST BE ADDED TO THE FACE OF THE SIGN: "THIS FACILITY IS LINED TO PROTECT GROUNDWATER QUALITY." IN ADDITION, THE BACK OF THE SIGN SHALL INCLUDE INFORMATION INDICATING WHICH FACILITIES ARE LINED, THE EXTENT OF THE LINING, THE LINER MATERIAL USED, THE LINER THICKNESS (IF CLAY OR TILL), AND THE TYPE AND DISTANCE OF THE MARKER ABOVE THE LINER (IF A GEOMEMBRANE). Public Works Department Surface Water Utility PUGET SOUND STARTS HERE LOGO SPECIFICATIONS: COLORS:ORANGE (R223, G96, B32); TEAL (R0, G142, B179) SPACING:KEEP ALL OTHER LOGOS, GRAPHICS, AND TYPE AT LEAST 1 UNIT AWAY FROM THE LOGO ON ALL SIDES. 1 UNIT IS THE HEIGHT OF THE SMALL CAP "A" IN THE LOGO AT ANY GIVEN SIZE. PERMANENT PUBLIC SURFACE WATER CONTROL POND SIGN STD. PLAN - 234.30 PUBLIC WORKS DEPARTMENT APPROVED: DATEGregg Zimmerman Public Works Administrator UNLESS OTHERWISE NOTED, DRAWING IS NOT TO SCALE (NTS) DocuSign Envelope ID: 6EECF5B6-602A-4E4A-B436-A317AA638878 9/28/2018 | 9:45 AM PDT