The URL can be used to link to this page

Home My WebLink AboutMFP24001622.pdfDEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT Minor Franchise Permit: MFP24001622 IVR Number: 24001622 Permit Information Permit Name: Lumen - P.206552 - 2900 NE 10th ST Address/Location:03/28/2024Application Date:7227900075Parcel Number: 2900 NE 10TH ST Permit Type:04/16/2024Issue Date:Franchise Permit Work Class:04/16/2025Expiration Date:Minor Utility Job Number: P.206552Franchise Type:Telephone Description: Century Link Overhead to underground conversion for Sunset Gardens. Contacts Name Address PhoneTypeBilling Dwight Montague Lumen B: (253) 590-6480 H: (253) 590-6480 C: (253) 590-6480 Applicant Nathan Macleod Lumen 7850 S Trafton St, Bldg B Tacoma, WA 98409 C: (253) 583-6283ApplicantX Prime Electric Inc 3460 161ST Ave SE Bellevue, WA 98008 Applicant Kim Parker QWest Corporation 931 14th St, Suite 1000A Denver, CO 80202 B: (303) 992-0752Contact Cheyenne Classen North Sky Communications 2112 97th Ave E Tacoma, WA 98444 Contact Michael Smith North Sky Communications 21320 84th Ave S Kent, WA 98032 C: (206) 305-5881Contractor Business License Number: 36846Construction Contractor: NORTHSC857Q4 CITY OF RENTON ROW 1055 S Grady Way Renton, WA 98057-3232 Owner QWest/Century Link - Billing 23315 66th Ave S Kent, WA 98032 Specialized Billing General Conditions & Signature Permission is hereby given for the work described on this permit according to the conditions hereon and according to the approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton. Ÿ This permit and plans must be posted at the job site at all times.Ÿ I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to Renton Trench Restoration and Street Overlay Requirements. Ÿ Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY work in the Right of Way. Ÿ Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010) (Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission pipeline company prior to performing any construction or excavation activities. This requirement to consult with the transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122. Ÿ (Date)(Signature) Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. DEPARTMENT OF PUBLIC WORKS Page 1 of 3 | Published: 3/18/2021 Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380 Website: rentonwa.gov TRAFFIC CONTROL PLAN APPLICATION Published: 3/18/2021 TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK. The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted within the city's right-of-way. 1.Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents. 2.The following items are all required for submittal of the TCP Application: ☐Electronic Copy of the TCP Application ☐Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall: ▪Include map(s) showing the location of the project and work area. ▪Be legible lettering and clear, contrasting, symbols of viewing or printing. ▪Must indicate street names, and north arrow and scale. ▪Types of plans required: o Work hour plan – show all mobility impacts during construction hours. o Non-work plan - show all mobility impacts after work hours when limited or no work is happening in the right-of-way (ROW), if applicable. o Changing construction phases – show construction sequence and each construction phase change even if the traffic control is not modified, if applicable. o Pedestrian access/detour plan, if applicable. -Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the Evergreen Safety Council. 3.Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].” Project Name: P.206552 Permit #: Site Address: 2900 NE 10th St Renton, WA 98056 Work Date: From __4/22/24_____ To __5/17/24___________ Work Time: Start ___8 am___________ End ___5 pm___________ Construction Company: North Sky Communications Phone/Cell: _________________________ City/State: Zip: Contact Name: Business Address: Description of Work: Approval By: _________________________________________________ Date:____________________ Transportation Engineering Jamey Beckwith 253 221 6766 16701 SE McGillivray Blvd Tacoma 98409 Lumen to place 500' of 200 pr cable from pole A1379677 to Pole A1379687 in customer provided conduit. Overhead to underground conversion. MFP24001622 Monday - Friday 8:00AM - 3:00PM Scott Warlick CED 4/16/2024 Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 2 of 3 | Published: 3/18/2021 PERMIT HOLDER AGREES TO ALL THE FOLLOWING: •Must have approved Traffic Control Plan (TCP) prior to commencing the work. •Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time, with the least possible inconvenience or delay to pedestrians. •WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the traveled way. •Comply with all traffic regulations of the City of Renton and the State of Washington. •Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control Devices. •Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures. •Any lane or street closures not in conformance with the approved traffic control plan and/or without notification of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes. •Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all costs of defense and attorney’s fees incurred in defending against same, arising from and related to implementation of the approved traffic control plans including claims arising from towing of private vehicles and the acts of the Permit Holder’s agents and employees. •The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable attorney’s fees and litigation costs incurred resulting from such claim. •In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for legal counsel chosen by the City to defend against same. •Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or pedestrian safety or travel. •All permit conditions shall be met. NOTES: •Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council. •Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD) and shown by a traffic control plan layout or reference to WSDOT. •Approved Temporary Traffic Control Plan must be at the work site during work hours. •Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public transit, to be affected by a temporary lane or road closure. •Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or walkway is impeded to safely redirect pedestrians around a work zone. •Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery road conditions during work and non-work hours. •Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous place on the vehicle or equipment. •In the case of Temporary No Parking Zones, all the following apply in addition to previous: •Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for vacate parking or curb lane usage. •Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block seventy-two (72) hours in advance of effective date and time. Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 3 of 3 | Published: 3/18/2021 •The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the project site. •Temporary traffic control devices must be removed immediately when work is done or no construction activities are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555 NE 2nd Street). I certify that the information on this application and within the submittal documents are accurate to the best of my knowledge and I acknowledge all the requirements on this application. Applicant’s Signature Date Applicant’s Name (Print) 3/27/24 Dwight Montague NE 1 0 T H S T JEFFERSON AVE NEINDEX AVE NEPRIVATE RD35ft38ft30ft 33ft LOCATION: 2900 NE 10th ST RENTON, WA 98056 ROADWORKAHEAD W20-1 ROADWORKAHEAD W20-1 BEPREPAREDTO STOP W3-4 W20-7 NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 100'+- 100'+- 100'+- ROADWORKAHEAD W20-1 BEPREPARED TO STOP W3-4W20-7 200'+-200'+-200'+- ROAD WORK AHEAD W20-1 BEPREPAREDTO STOP W3-4 W20-7 200' + - 200' + - 200' + - EN T R A N C E / E X I T EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE / EXIT NOTE: NO-PARKS REQUIRED TO BE SET UP 72 HOURS IN ADVANCE OF WORK. SID E W A L K SI D E W A L K SI D E W A L K SIDEWALKSTOPSTOP STOPSTOP NOTE: MOBILE AERIAL WORK WITH FLAGGERS FOLLOWING WORK TRUCK. Plan Scale 1 : 360 (1'' = 30') Legend Boom Truck Cone STOP Flagger Pole Work Area POSTED SPEED LIMIT: 25MPH TRAFFIC CONTROL PLAN AERIAL PHASE SHEET 1 OF 2 ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: MOBILE AERIAL WORK FROM POLE TO POLE FLAGGERS TO FOLLOW PATH WITH TRUCK SIDEWALKS TO REMAIN OPEN/ACCESSIBLE MATCH SHEET 2 www.invarion.comMFP24001622 INDEX AVE NEINDEX AVE NEJEFFERSON AVE NE 33ft 26ft 25ftGROCERY OUTLET PARKING LOT DOLLAR TREE PARKING LOT PRIVATE RD LOCATION: 1000 JEFFERSON AVE NE RENTON, WA 98056 ROADWORKAHEADW20-1 NOPARKING FROM TO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 EN T R A N C E / E X I T EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE/ EXITENTRANCEEXITNOTE: NO-PARKS REQUIRED TO BE SET UP 72 HOURS IN ADVANCE OF WORK. SI D E W A L K SIDEWALKSIDEWALKSIDEWALKSTOP STOP STOP STOP NOTE: MOBILE AERIAL WORK WITH FLAGGERS FOLLOWING WORK TRUCK. Plan Scale 1 : 360 (1'' = 30') Legend Boom Truck Cone STOP Flagger Pole Work Area TRAFFIC CONTROL PLAN AERIAL PHASE SHEET 2 OF 2 ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: MOBILE AERIAL WORK FROM POLE TO POLE FLAGGERS TO FOLLOW PATH WITH TRUCK SIDEWALKS TO REMAIN OPEN/ACCESSIBLE POSTED SPEED LIMIT: 25MPH MATCH SHEET 1 www.invarion.comMFP24001622 NE 1 0 T H S T JEFFERSON AVE NEPRIVATE RD35ft38ft30ft 33ft LOCATION: 2900 NE 10th ST RENTON, WA 98056 EN T R A N C E / E X I T EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE / EXIT NOTE: NO-PARKS REQUIRED TO BE SET UP 72 HOURS IN ADVANCE OF WORK. SID E W A L K SI D E W A L K SI D E W A L K SIDEWALKSID E W A L K ROADWORKAHEAD W20-1 100'+- ROAD WORK AHEAD W20-1 100'+- ROADWORKAHEAD W20-1 100'+- ROAD WORK AHEAD W20-1 NOPARKING FROMTO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 ROADWORKAHEADW20-1 30 ft HH1 5'x5'INDEX AVE NEPlan Scale 1 : 360 (1'' = 30') Legend Cone Handhole Pole Spotter Work Area Work Truck POSTED SPEED LIMIT: 25MPH TRAFFIC CONTROL PLAN HH1 SHEET 1 OF 4 ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: HANDHOLE & POLE ACCESS SIDEWALKS TO REMAIN OPEN/ACCESSIBLE SPOTTERS REQUIRED TO ENSURE SAFETY www.invarion.comMFP24001622 NE 1 0 T H S T JEFFERSON AVE NEPRIVATE RDINDEX AVE NEJEFFERSON AVE NE NE 1 0 T H S T 35ft33ft LOCATION: 2900 NE 10th ST RENTON, WA 98056 LOCATION: 1000 JEFFERSON AVE NE RENTON, WA 98056 EN T R A N C E / E X I T EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE/ EXITENTRANCEEXITENTRANCE / EXIT SID E W A L K SI D E W A L K SI D E W A L K SIDEWALKSIDEWALKSIDEWALKSID E W A L K NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 ROADWORKAHEADW20-1 100'+-ROAD WORK AHEAD W20-1100'+-23 ft HH2 5'x5' NOPARKING FROM TOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOTE: NO-PARKS REQUIRED TO BE SET UP 72 HOURS IN ADVANCE OF WORK. Plan Scale 1 : 360 (1'' = 30') Legend Cone Handhole Pole Spotter Work Area Work Truck ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. POSTED SPEED LIMIT: 25MPH Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: HANDHOLE & POLE ACCESS SIDEWALKS TO REMAIN OPEN/ACCESSIBLE SPOTTERS REQUIRED TO ENSURE SAFETY TRAFFIC CONTROL PLAN HH2 SHEET 2 OF 4 www.invarion.comMFP24001622 INDEX AVE NEJEFFERSON AVE NE NE 1 0 T H S T 33ft 25ftGROCERY OUTLET PARKING LOT DOLLAR TREE PARKING LOT PRIVATE RD LOCATION: 1000 JEFFERSON AVE NE RENTON, WA 98056 EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE/ EXITENTRANCEEXITSI D E W A L K SIDEWALKSIDEWALKSIDEWALKSI D E W A L K ROADWORKAHEADW20-1 100'+-ROADWORKAHEAD W20-1100'+-ROAD WORKAHEAD W20-1100'+-16 ft HH3 5'x5' NOPARKING FROM TO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOPARKING FROMTO TOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555 NOTE: NO-PARKS REQUIRED TO BE SET UP 72 HOURS IN ADVANCE OF WORK. Plan Scale 1 : 360 (1'' = 30') Legend Cone Handhole Spotter Work Area Work Truck ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. POSTED SPEED LIMIT: 25MPH Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: HANDHOLE & POLE ACCESS SIDEWALKS TO REMAIN OPEN/ACCESSIBLE SPOTTERS REQUIRED TO ENSURE SAFETY TRAFFIC CONTROL PLAN HH3 SHEET 3 OF 4 www.invarion.comMFP24001622 INDEX AVE NEJEFFERSON AVE NE NE 1 0 T H S T 33ft 25ftGROCERY OUTLET PARKING LOT DOLLAR TREE PARKING LOT PRIVATE RD LOCATION: 1000 JEFFERSON AVE NE RENTON, WA 98056 EN T R A N C E / E X I T ENTRANCE / EXITENTRANCE/ EXITENTRANCEEXITSI D E W A L K SIDEWALKSIDEWALKSIDEWALKSI D E W A L K ROADWORKAHEADW20-1 100'+-ROADWORKAHEAD W20-1100'+-ROAD WORKAHEAD W20-1100'+-25 ft 22 ft NEW POLE 5'x5' Plan Scale 1 : 360 (1'' = 30') Legend Cone Pole Spotter Work Area Work Truck ALL CONTROL SET-UP, SIGN SPACING, SIGN SIZING, AND PROCEDURES WILL CONFORM TO SPECIFICATIONS STATED IN FEDERAL MANUAL ON UNIFORMED TRAFFIC CONTROL DEVICES (M.U.T.C.D) CITIES AND VARIOUS MUNICIPALITIES MAY HAVE ALSO ADOPTED SPECIALIZED GUIDELINES FOR TRAFFIC CONTROL WITHIN THEIR JURISDICTION. IT IS THE RESPONSIBILITY OF THE ON-SITE TRAFFIC CONTROL PERSONEL TO SEE IF AND ANY SPECIAL CONDITIONS EXIST. POSTED SPEED LIMIT: 25MPH Date:3/23/2024 Author:Zachery Miller Project:P.206552 Comments: HANDHOLE & POLE ACCESS SIDEWALKS TO REMAIN OPEN/ACCESSIBLE SPOTTERS REQUIRED TO ENSURE SAFETY TRAFFIC CONTROL PLAN NEW POLE SHEET 4 OF 4 www.invarion.comMFP24001622 NOTICE-NOT FOR DISCLOSURE OUTSIDE OF CENTURYLINK AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTJOB:SH OF BEFORE YOU DIG811CALL TWO WORKING DAYSRNGE:SECT:TOWN:GEO CODE:WC CLLI:TOTAL EXISTING CONDUIT USED:TOTAL NEW BORE:TOTAL NEW DIRT TRENCHESTIMATED TOTALSTOTAL NEW AERIAL:SIDEWALK (PCC) R&R:ASPHALT (AC) R&R:S.F.S.F.L.F.L.F.L.F.L.F.TOTAL NEW ASPHALT TRENCH:L.F.TOTAL NEW S/W TRENCH:L.F.5000000000”NVICINITY MAPSCOPE OF WORK:LUMEN TO PLACE APPROXIMATELY 500FT (0.09 MILES) OF 200PR COPPER LINE IN CUSTOMER PROVIDED CONDUIT PATHSPANNING FROM POLE A1379677 TO POLE A1379687. THERE ARE THREE CUSTOMER PROVIDED HH WHERE THE CABLEWILL PASS THROUGH AND GET SPLICED IN. LUMEN'S 200PR COPPER LINE WILL GO DOWN A RISER AT POLE A1379677 ANDGET PULLED ALONG THE PROVIDED CONDUIT PATH. AT EACH HH THE 200PR WILL GET SPLICED IF NEEDED. AT POLEP1-A1379687 OUR 200PR COPPER LINE WILL GO UP A RISER. AT THE POLE A TERMINAL WILL BE PLACED AND THEEXISTING DROP WILL GET TRANSFERRED TO THE NEW TERMINAL.SPLICE NEW 200PR COPPER ATOP OF POLE A1379677. PULL THE 200PR LINE THROUGH THE CONDUIT PATH TO HH #1 ANDSPLICE MORE 200PR TO GET PULLED THROUGH HH #2. AT HH #2 SPLICE MORE 200PR AND PULL THROUGH TO HH #3. ATHH #3 SPLICE MORE 200PR AND PULL THOUGH TO THE NEWLY PLACED POLE BY PSE POLE P1-A1379687. AT POLEP1-A1379687 PULL THE 200PR UP A RISER TO THE TOP OF THE POLE. PLACE A NEW TERMINAL ATOP OF POLE P1-A1379687AND SPLICE IN THE DROP THAT IS ATTACHED TO POLE P0-A1379687 WHICH IS TO BE REMOVED BY PSE AFTER OUR LINEGETS TRANSFERRED. REMOVE EXISTING 200PR AERIAL COPPER LINE AND STRAND SPANNING FROM POLE A1379677 TOPOLE P0-A1379687. REMOVE POLE ANCHOR ROD FROM POLE P0-A1379687 (POLE TO BE REMOVED BY PSE). TAG NEWPOLE P1-A1379687.®FIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: (253) 458-6549DRAFTED BY: MOUNTAIN LTD/DL - 03/12/2423N59P.206552W22900 NE 10TH STRENTON, WA 9805613MFP24001622 TTEE CATV CATV CATV GG TS TS WW S S SD SD IRRIG IRRIG C/L C/L R/W R/W R/W P/L P/L B/C B/C B /C EOP EOP TTTUSAMEEPWREETVTVVTSVWSSDVETTTXXX'XXX'XXX'XXX'XITEM #STATIONPOLE OWNERPROPOSED HOAPOLE NUMBER(S) - CTL/PWR/OTHERITEM#STAHT-CL-YRXX'-X"POLE#MAKE READYEXISTING ATTACHMENTSNOTICE-NOT FOR DISCLOSURE OUTSIDE OF CENTURYLINK AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTJOB:SH OF RNGE:SECT:TOWN:GEO CODE:WC CLLI: BEFORE YOU DIG811CALL TWO WORKING DAYS®FIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: (253) 458-6549DRAFTED BY: MOUNTAIN LTD/DL - 03/12/2423N59P.206552W22900 NE 10TH STRENTON, WA 9805623MFP24001622 NOTICE-NOT FOR DISCLOSURE OUTSIDE OF CENTURYLINK AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTRNGE:SECT:TOWN:JOB:SH OF GEO CODE:WC CLLI: BEFORE YOU DIG811CALL TWO WORKING DAYS®DRAFTED BY: MOUNTAIN LTD/DL - 03/12/2423N59P.206552W22900 NE 10TH STRENTON, WA 9805633FIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: (253) 458-6549NOTE:SPLICE NEW 200PR COPPER ATOP OF POLE A1379677. PULL THE 200PR LINETHROUGH THE CONDUIT PATH TO HH #1 AND SPLICE MORE 200PR TO GETPULLED THROUGH HH #2. AT HH #2 SPLICE MORE 200PR AND PULL THROUGHTO HH #3. AT HH #3 SPLICE MORE 200PR AND PULL THOUGH TO THE NEWLYPLACED POLE BY PSE POLE P1-A1379687. AT POLE P1-A1379687 PULL THE 200PRUP A RISER TO THE TOP OF THE POLE. PLACE A NEW TERMINAL ATOP OF POLEP1-A1379687 AND SPLICE IN THE DROP THAT IS ATTACHED TO POLE P0-A1379687WHICH IS TO BE REMOVED BY PSE AFTER OUR LINE GETS TRANSFERRED.REMOVE EXISTING 200PR AERIAL COPPER LINE AND STRAND SPANNING FROMPOLE A1379677 TO POLE P0-A1379687. REMOVE POLE ANCHOR ROD FROM POLEP0-A1379687 (POLE TO BE REMOVED BY PSE). TAG NEW POLE P1-A1379687.2900#7227900075 EOP R/W R/W R/W R/ W R/W R/W R/W R/W R/W R/W R/W R/W R/W EOP E O P EO P EOP EOP EOP P/ L P/L T x x x x x x x x x TT#7227900091#7227900090#0089000050NOTE:EX 200PR TO BE REMOVED.NOTE:DROP TO BE TRANSFERREDTO NEW TERMINAL.NOTE:NEW POLE PLACED BY PSE.NOTE:TO BE REMOVED BY PSE.NOTE:TO BE REMOVED BY PSE.NOTE:TO BE REMOVED BY PSE.NOTE:NEW 200PR TO BE PLACED.NOTE:LUMEN TO PLACE APPROXIMATELY 500FT (0.09 MILES) OF 200PR COPPER LINE INCUSTOMER PROVIDED CONDUIT PATH SPANNING FROM POLE A1379677 TO POLEA1379687. THERE ARE THREE CUSTOMER PROVIDED HH WHERE THE CABLE WILLPASS THROUGH AND GET SPLICED IN. LUMEN'S 200PR COPPER LINE WILL GO DOWNA RISER AT POLE A1379677 AND GET PULLED ALONG THE PROVIDED CONDUIT PATH.AT EACH HH THE 200PR WILL GET SPLICED IF NEEDED. AT POLE P1-A1379687 OUR200PR COPPER LINE WILL GO UP A RISER. AT THE POLE A TERMINAL WILL BE PLACEDAND THE EXISTING DROP WILL GET TRANSFERRED TO THE NEW TERMINAL.MFP24001622 REDLINE: OH-to-UG Relocation - 2900 NE 10th St, Renton, WA 98056 Address: 2900 NE 10th St, Renton, WA 98056 Job Number: P.206552 Narrative: Lumen to place approximately 500ft (0.09 miles) of 200PR copper line in customer provided conduit path spanning from pole A1379677 to pole A1379687. There are three customer provided HH where the cable will pass through and get spliced in. Lumen's 200PR copper line will go down a riser at pole A1379677 and get pulled along the provided conduit path. At each HH the 200PR will get spliced if needed. At pole P1-A1379687 our 200PR copper line will go up a riser. At the pole a terminal will be placed and the existing drop will get transferred to the new terminal. Pole A1379677 Pole A1379206 (To be Removed by PSE) Pole A1379688 (To be Removed by PSE)Pole P0-A1379687 (To be Removed by PSE) Pole P1-A1379687 (New Pole Placed by PSE) Scope of Work: - Splice new 200PR copper atop of pole A1379677. - Pull the 200PR line through the conduit path to HH #1 and splice more 200PR to get pulled through HH #2. - At HH #2 splice more 200PR and pull through to HH #3. - At HH #3 splice more 200PR and pull though to the newly placed pole by PSE pole P1-A1379687. - At pole P1-A1379687 pull the 200PR up a riser to the top of the pole. - Place a new terminal atop of pole P1-A1379687 and splice in the drop that is attached to pole P0-A1379687 which is to be removed by PSE after our line gets transferred. - Remove existing 200PR aerial copper line and strand spanning from pole A1379677 to pole P0-A1379687. - Remove pole anchor rod from pole P0-A1379687 (pole to be removed by PSE) - Tag new pole P1-A1379687. Existing 200PR to be Removed New 200PR to be Placed Drop to be Transferred to new terminal HH #3 HH #2 HH #1 2900 NE 10th St, Renton, WA 98056 MFP24001622