The URL can be used to link to this page

Home My WebLink AboutMFP24002150.pdfDEPARTMENT OF COMMUNITY AND ECONOMIC DEVELOPMENT Minor Franchise Permit: MFP24002150 IVR Number: 24002150 Permit Information Permit Name: P.182010 Address/Location:04/24/2024Application Date:7224500315Parcel Number: 546 BURNETT AVE N Permit Type:05/09/2024Issue Date:Franchise Permit Work Class:05/09/2025Expiration Date:Minor Utility Job Number: P.182010Franchise Type:Telephone Description: PSE REPLACED A PSE OWNED POLE 318236 166068. PSE HAS ALREADY PULLED THE OLD POLE. LUMEN HAS A 200X COPPER CABLE THAT HAS BEEN TRANSFERRED TO THE NEW POLE. LUMEN HAS A 50X COPPER CABLE THAT CAME DOWN THE OLD POLE & CONTINUES EAST AS A BURIED PATH. LUMEN WILL PLACE A NEW 50X COPPER CABLE ATOP THE NEW POLE, INSTALL A RISER ON THE NEW POLE, AND CREATE A NEW BURIED SPLICE. LUMEN WILL EXPOSE THE GROUND AROUND THE NEW POLE AS PART OF THIS JOB AND WILL PLACE COLD MIX OVER THE GROUND DISTURBANCE CREATED BY THE CABLE RELOCATION. ONCE LUMEN HAS THIS WORK COMPLETED, PSE WILL DO HARD SURFACE RESTORATION ON THE SIDEWALK THAT THE OLD POLE AND NEW POLE ARE LOCATED. JOB IS @ 581 BURNETT AVE N, WITHIN THE RENTON MAIN WIRE CENTER Contacts Name Address PhoneTypeBilling Merilyn Luong Lumen H: (206) 806-7160Applicant Nathan Macleod Lumen 7850 S Trafton St, Bldg B Tacoma, WA 98409 C: (253) 583-6283ApplicantX Michael Smith North Sky Communications 21320 84th Ave S Kent, WA 98032 C: (206) 305-5881Contractor Business License Number: 36846Construction Contractor: NORTHSC857Q4 CITY OF RENTON ROW 1055 S Grady Way Renton, WA 98057-3232 Owner QWest/Century Link - Billing 23315 66th Ave S Kent, WA 98032 Specialized Billing General Conditions & Signature Permission is hereby given for the work described on this permit according to the conditions hereon and according to the approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton. Ÿ This permit and plans must be posted at the job site at all times.Ÿ I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to Renton Trench Restoration and Street Overlay Requirements. Ÿ Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY work in the Right of Way. Ÿ Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010) (Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission pipeline company prior to performing any construction or excavation activities. This requirement to consult with the transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122. Ÿ (Date)(Signature) Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. DEPARTMENT OF PUBLIC WORKS Page 1 of 3 | Published: 3/18/2021 Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380 Website: rentonwa.gov TRAFFIC CONTROL PLAN APPLICATION Published: 3/18/2021 TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK. The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted within the city's right-of-way. 1. Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents. 2. The following items are all required for submittal of the TCP Application: ☐ Electronic Copy of the TCP Application ☐ Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall: ▪ Include map(s) showing the location of the project and work area. ▪ Be legible lettering and clear, contrasting, symbols of viewing or printing. ▪ Must indicate street names, and north arrow and scale. ▪ Types of plans required: o Work hour plan – show all mobility impacts during construction hours. o Non-work plan - show all mobility impacts after work hours when limited or no work is happening in the right-of-way (ROW), if applicable. o Changing construction phases – show construction sequence and each construction phase change even if the traffic control is not modified, if applicable. o Pedestrian access/detour plan, if applicable. - Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the Evergreen Safety Council. 3. Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].” Project Name: Permit #: Site Address: Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________ Construction Company: Contact Name: Phone/Cell: _________________________ Business Address: City/State: Zip: Description of Work: Approval By: _________________________________________________ Date:____________________ Transportation Engineering P.182010 5/20/2024 5/23/2024 8AM 5PM Northsky Communications Mike Smith LUMEN HAS A 200X COPPER CABLE THAT HAS BEEN TRANSFERRED TO THE NEW POLE. LUMEN HAS A 50X COPPER CABLE THAT CAME DOWN THE OLD POLE & CONTINUES EAST AS A BURIED PATH. LUMEN WILL PLACE A NEW 50X COPPER CABLE ATOP THE NEW POLE, INSTALL A RISER ON THE NEW POLE, AND CREATE A NEW BURIED SPLICE. LUMEN WILL EXPOSE THE GROUND AROUND THE NEW POLE AS PART OF THIS JOB AND WILL PLACE COLD MIX OVER THE GROUND DISTURBANCE CREATED BY THE CABLE RELOCATION. 546 BURNETT AVE N 16701 SE McGillivrary Blvd Vancouver WA 98683-3462 425-615-7121 Monday - Friday 8:00AM - 3:00PM MFP24002150 Scott Warlick CED 5/9/2024 Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 2 of 3 | Published: 3/18/2021 PERMIT HOLDER AGREES TO ALL THE FOLLOWING: • Must have approved Traffic Control Plan (TCP) prior to commencing the work. • Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time, with the least possible inconvenience or delay to pedestrians. • WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the traveled way. • Comply with all traffic regulations of the City of Renton and the State of Washington. • Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control Devices. • Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures. • Any lane or street closures not in conformance with the approved traffic control plan and/or without notification of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes. • Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all costs of defense and attorney’s fees incurred in defending against same, arising from and related to implementation of the approved traffic control plans including claims arising from towing of private vehicles and the acts of the Permit Holder’s agents and employees. • The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable attorney’s fees and litigation costs incurred resulting from such claim. • In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for legal counsel chosen by the City to defend against same. • Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or pedestrian safety or travel. • All permit conditions shall be met. NOTES: • Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council. • Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD) and shown by a traffic control plan layout or reference to WSDOT. • Approved Temporary Traffic Control Plan must be at the work site during work hours. • Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public transit, to be affected by a temporary lane or road closure. • Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or walkway is impeded to safely redirect pedestrians around a work zone. • Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery road conditions during work and non-work hours. • Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous place on the vehicle or equipment. • In the case of Temporary No Parking Zones, all the following apply in addition to previous: • Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for vacate parking or curb lane usage. • Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block seventy-two (72) hours in advance of effective date and time. Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document. Page 3 of 3 | Published: 3/18/2021 • The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the project site. • Temporary traffic control devices must be removed immediately when work is done or no construction activities are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555 NE 2nd Street). I certify that the information on this application and within the submittal documents are accurate to the best of my knowledge and I acknowledge all the requirements on this application. Applicant’s Signature Date Applicant’s Name (Print) Merilyn Luong 4/24/2024 Traffic Control PlannerElite Traffic Solutions206-922-9205julian@elitetrafficsolutions.comRentonKingP.182010 98057 COVER SHEET BUFFER DATALONGITUDINAL BUFFER SPACE = BSPEED (MPH)LENGTH (FEET)25 30 35 40 45 50 55 60 65 70155200250305360425495570645730 MINIMUM SHOULDER TAPER LENGTH (L/3) (FEET)ShoulderWidthFeet Posted Speed (mph)10 25 30 35 40 45 50 55 60 65 7040404060609090901201501301701501902008160170190240220USE A MINIMUM 3 DEVICES TAPER FOR SHOULDER LESS THEN 8'. (1) All spacing may be adjusted to accommodate interchange ramps, at-grade intersections, and driveways.(2) This spacing may be reduced in urban areas to fit roadway conditions. RURAL HIGHWAYSRURAL ROADSRURAL ROADS & URBAN ARTERIALSRURAL ROADS, URBAN ARTERIALSRESIDENTIAL & BUSINESS DISTRICTSURBAN STREETSALL SIGNS ARE 48'' X 48'' BLACK ON ORANGE UNLESS OTHERWISEDESIGNATED. 60/65 MPH45/55 MPH35/40 MPH25/30 MPH25 MPH OR LESS 800'SIGN SPACING=X (FEET) (1)500'350'200'100'(2)(2) FREEWAYS & EXPRESSWAYS 55/70 MPH 1500 (OR ASPER MUTCD) CHANNELIZING DEVICE SPACING (FEET)MPH TAPER TANGENT50/7035/4525/30 403020 806040 Scope of Work: Pole WorkTraffic Control Plan:Shoulder Closure All Signs & Spacing to conform to the MUTCD Standards-reference WSDOT"Work Zone Traffic Control Guidelines M54-44.04 January 2021" & The City of Renton's Standards. Standard Notes:1. Reserve curb space with Traffic Permits 684-5086 in Pay Station blocks2. Haul Routes to be submitted to Don Smith, City Truck Officer, don.smith@seattle.gov3. Metro trolley coaches cannot shift more than 9' from the center of their overhead lines.Contact Metro Trolley at 477-1150 or trolley.impacts@kingcounty.gov.For Metro non-trolley coach or other transit agency relocations contact 477-1140 orconstruction.coord@kingcounty.gov4. Sidewalks are either open or not open.A sidewalk is closed if a minimum 4' path cannot be maintained measured from property line,or 5 ½' if created from face of curb5. Standard Advance Warning Signs shall be used for plates orrough road during after-hours, including “Motorcyclist” sign6. If only one lane is open in a direction, that lane shall be a minimum of 11' wide,unless spotter/flaggers are used, in which case the lane can be a minimum of 10'7. Flaggers shall be used in accordance with WAC 468-95-302.UPO will be required if a traffic signal could be countermanded SHEET 1PPOLE-A0509513 REVISED04/23/2024 by:Elite Traffic Solutions206.922.9205Julian MoralesTCS #012813Exp.4/30/2025Juʙiʋn Morales www.invarion.com MFP24002150 Traffic Control PlannerElite Traffic Solutions206-922-9205julian@elitetrafficsolutions.comRentonKingP.182010 98057 01 OF 01 LegendPA0509513ConeSign StandSSpotterWork Area BUFFER DATALONGITUDINAL BUFFER SPACE = BSPEED (MPH)LENGTH (FEET)25 30 35 40 45 50 55 60 65 70155200250305360425495570645730 MINIMUM SHOULDER TAPER LENGTH (L/3) (FEET)ShoulderWidthFeet Posted Speed (mph)10 25 30 35 40 45 50 55 60 65 7040404060609090901201501301701501902008160170190240220USE A MINIMUM 3 DEVICES TAPER FOR SHOULDER LESS THEN 8'. (1) All spacing may be adjusted to accommodate interchange ramps, at-grade intersections, and driveways.(2) This spacing may be reduced in urban areas to fit roadway conditions. RURAL HIGHWAYSRURAL ROADSRURAL ROADS & URBAN ARTERIALSRURAL ROADS, URBAN ARTERIALSRESIDENTIAL & BUSINESS DISTRICTSURBAN STREETSALL SIGNS ARE 48'' X 48'' BLACK ON ORANGE UNLESS OTHERWISEDESIGNATED. 60/65 MPH45/55 MPH35/40 MPH25/30 MPH25 MPH OR LESS 800'SIGN SPACING=X (FEET) (1)500'350'200'100'(2)(2) FREEWAYS & EXPRESSWAYS 55/70 MPH 1500 (OR ASPER MUTCD) CHANNELIZING DEVICE SPACING (FEET)MPH TAPER TANGENT50/7035/4525/30 403020 806040 Scope of Work: Pole WorkTraffic Control Plan:Shoulder Closure 546 BURNETT AVE N N 6TH ST35MPH All Signs & Spacing to conform to the MUTCD Standards-reference WSDOT"Work Zone Traffic Control Guidelines M54-44.04 January 2021" & The City of Renton's Standards.LOGAN AVE N25MPH Plan Scale1 : 600 (1'' = 50') BURNETT AVE N25MPH 532 BURNETT AVE N General Notes:1. All signs and spacing shall conform to The MUTCD and WAC.2. Priority passage through the work area for emergencyvehicles vehicles shall be provided at all times.3. Alert Metro Transit 5 days in advance4. Protective vehicle recommended may be a work vehicle.5. Devices should not encroach into adjacent lanes.6. All signs min. 48 x 48 B/O unless otherwise specified.7. Channelization devices are 28" reflective cones8. All sign spacing may be adjusted to accommodate at-gradeintersections and/or driveways.9. Traffic Control Supervisor required for ROW impacts. P POLE-A050951328'10'10'8'35'S SPOTTER SHALL ASSIST PEDESTRIANSTHROUGH WORKZONE SAFELY. XX ROADWORKAHEAD SHOULDERCLOSED ROADWORKAHEAD 80'NO PARK24 HRS NOPARKINGFROMTOTOW AWAY AREAPHONE 685-5444YOUR COMPANY NAME 555-5555R7-T39L/3 REVISED04/23/2024 by:Elite Traffic Solutions206.922.9205Julian MoralesTCS #012813Exp.4/30/2025Juʙiʋn Morales www.invarion.comMFP24002150 NOTICE-NOT FOR DISCLOSURE OUTSIDE OF LUMEN AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTJOB: BEFORE YOU DIG811CALL TWO WORKING DAYSRNGE:SECT:TOWN:GEO CODE: WC CLLI:TOTAL EXISTING CONDUIT USED:TOTAL NEW BORE:TOTAL NEW DIRT TRENCHESTIMATED TOTALSTOTAL NEW AERIAL:SIDEWALK (PCC) R&R:ASPHALT (AC) R&R:S.F.S.F.L.F.L.F.L.F.L.F.TOTAL NEW ASPHALT TRENCH:L.F.TOTAL NEW S/W TRENCH:L.F.00000000”NVICINITY MAPSL581 BURNETT AVE NRENTON, WA 98057P.182010W26852RNTNWA0123N5E804/01/2431®CUSTOMER NAME: N/ALCON: N/APHONE: N/AEMAIL: N/AWFMT #: N/AORDER #: NAARMOR OR DSR #: N/ASCOPE OF WORK:PSE REPLACED A PSE OWNED POLE 318236-166068. PSE HAS ALREADY PULLED THE OLD POLE. LUMEN HAS A 200X COPPER CABLE THAT HAS BEEN TRANSFERRED TO THE NEW POLE. LUMEN HAS A 50X COPPER CABLE THAT CAME DOWN THE OLD POLE & CONTINUES EAST AS A BURIED PATH. LUMEN WILL PLACE A NEW 50X COPPER CABLE ATOP THE NEW POLE, INSTALL A RISER ON THE NEW POLE, AND CREATE A NEW BURIED SPLICE. LUMEN WILL EXPOSE THE GROUND AROUND THE NEW POLE AS PART OF THIS JOB AND WILL PLACE COLD MIX OVER THE GROUND DISTURBANCE CREATED BY THE CABLE RELOCATION. ONCE LUMEN HAS THIS WORK COMPLETED, PSE WILL DO HARD SURFACE RESTORATION ON THE SIDEWALK THAT THE OLD POLE AND NEW POLE ARE LOCATED. JOB IS @ 581 BURNETT AVE N, WITHIN THE RENTON MAIN WIRE CENTER.SH OF DRAFTED BY: MOUNTAIN LTD/MT LTD ENGINEER: N/APHONE NO: N/AEMAIL: N/AFIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: 253-458-6549EMAIL: Kaleb.ConkleHernandez@lumen.comMFP24002150 TT T T TEE E E E CATV CATV CATV CAT V CAT V CAT V CAT V CAT V GG GGG TS TS TS TS TS WWWWW S S S S S SD SD SD SD SD C/L C/L C/L C/L C/L C/L R/W R/W R/W R/W R/W R/W R/W P/L P/L P/L P/L P/L P/L B/C B/C B/C B/C B/ C B/ C B/C B/C EOP EOP EOP EOP EOP TTTUSAMEEPWREE CATV CATV TVTV CATV CATV CATV CATV CATV CATV CATV CATV VTS C/L C/L VWSSDVETTTXXX'XXX'XXX'XXX'X IRRIG IRRIG F1NOTICE-NOT FOR DISCLOSURE OUTSIDE OF LUMEN AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTJOB: RNGE:SECT:TOWN:GEO CODE: WC CLLI: BEFORE YOU DIG811CALL TWO WORKING DAYSRNGE:SECT:TOWN:JOB:GEO CODE:WC CLLI:DRAFTED BY: MOUNTAIN LTD/SH OF SL581 BURNETT AVE NRENTON, WA 98057P.182010W26852RNTNWA0123N5E804/01/2432®MT LTD ENGINEER: N/APHONE NO: N/AEMAIL: N/AFIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: 253-458-6549EMAIL: Kaleb.ConkleHernandez@lumen.comMFP24002150 NOTE:THE RIGHT-OF-WAY SHOWN HAS NOT BEEN SURVEYEDOR TIED. RIGHT-OF-WAY LOCATION IS ASSUMED WITHREFERENCE TO ONLINE DATA SOURCE MATERIALS.CONTRACTOR TO VERIFY ALL RIGHTS OF WAY AND/OREASEMENTS PRIOR TO CONSTRUCTION. EOP EOP EOP EOP EOP EOP EOP EOP EOP EOP STATION PSEPROPOSED HOA318236-166068TRANSFERPOLE NUMBER(S) - LMN/PWR/OTHER - A0509513SPLICE NEW 50X, PLACE NEW RISER, CREATE BURIED SPLICE, PLACE COLD MIX AS TEMPORARY RESTORATION. PSE TO DO HARD SURFACE RESTORATION ONCE LUMEN WORK IS COMPLETED.N/A1NOTE:PSE REPLACED A PSE OWNED POLE 318236-166068. PSE HAS ALREADY PULLED THE OLD POLE. LUMEN HAS A 200X COPPER CABLE THAT HAS BEEN TRANSFERRED TO THE NEW POLE. LUMEN HAS A 50X COPPER CABLE THAT CAME DOWN THE OLD POLE & CONTINUES EAST AS A BURIED PATH. LUMEN WILL PLACE A NEW 50X COPPER CABLE ATOP THE NEW POLE, INSTALL A RISER ON THE NEW POLE, AND CREATE A NEW BURIED SPLICE. LUMEN WILL EXPOSE THE GROUND AROUND THE NEW POLE AS PART OF THIS JOB AND WILL PLACE COLD MIX OVER THE GROUND DISTURBANCE CREATED BY THE CABLE RELOCATION. ONCE LUMEN HAS THIS WORK COMPLETED, PSE WILL DO HARD SURFACE RESTORATION ON THE SIDEWALK THAT THE OLD POLE AND NEW POLE ARE LOCATED. JOB IS @ 581 BURNETT AVE N, WITHIN THE RENTON MAIN WIRE CENTER.OLDBURNETT AVE N. SIDEWALK LOGAN AVE N.SIDEWALK NEWNOTICE-NOT FOR DISCLOSURE OUTSIDE OF LUMEN AND AFFILIATES EXCEPT UNDER WRITTEN AGREEMENTRNGE:SECT:TOWN:JOB: GEO CODE: WC CLLI: BEFORE YOU DIG811CALL TWO WORKING DAYSSL581 BURNETT AVE NRENTON, WA 98057P.182010W26852RNTNWA0123N5E804/01/2433RSH OF DRAFTED BY: MOUNTAIN LTD/MT LTD ENGINEER: N/APHONE NO: N/AEMAIL: N/AFIBER ENGINEER: BILLY C. HERNANDEZPHONE NO: 253-458-6549EMAIL: Kaleb.ConkleHernandez@lumen.comMFP24002150