Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
M_MATERIAL SUBMITTAL_CRUMBL COOKIES_20240624_v1
7855 South 206th Street, Kent, WA 98032 ● Phone: 253-872-7222 ●Fax: 253-872-7277 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR CRUMBL COOKIES #1077 815 N 10TH PL. RENTON, WA. 98057 Archer Job # S24-052 815 N 10TH ST, SUITE E, RENTON, WA. 98057 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT. Series AH2 Series AH2-CC 1.0 PRODUCT DESCRIPTION Available Sizes by Component Series AH2 1"/DN25 ID Braided Hose: 31, 36, 48, 60, 72"/790, 915, 1220, 1525, 1830 mm. Note: length includes adapter nipple and 5.75"/140 mm straight reducer. Series AH2-CC 1"/DN25 ID Braided Hose: 31, 36, 48, 60, 72"/790, 915, 1220, 1525, 1830 mm. Note: length includes captured coupling and 5.75"/140 mm straight reducer. Connections • From Branchline • ¾"/20mm BSPT female thread (VdS only) • 1 ¼"/32mm BSPT female thread (LPCB only) • 1"/25mm NPT or BSPT female Thread • 1"/25mm Grooved IGS (refer to Submittal 10.54 for additional IGS connections) • No. 116 CPVC Adapter (1"/25mm Female CPVC Socket x 1"/25mm Grooved IGS) • No. 142 Welded Outlet • Style 922 Outlet-T • Style 920N Mechanical-T Outlet • No. 65 Grooved End of Run Fitting • Hose Inlet • 1"/25mm Grooved IGS • 1"/25mm NPT or BSPT male thread • ¾"/20mm BSPT male thread (VdS only) • 1 ¼"/32mm BSPT male thread (LPCB only) Victaulic® VicFlex™ Sprinkler Fittings Series AH2 and AH2-CC Braided Flexible Hoses 10.85 1 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 2 victaulic.com 1.0 PRODUCT DESCRIPTION (CONTINUED) • Sprinkler Reducer • Sprinkler Connection: 1/2" and ¾"/15mm and 20mm NPT or BSPT female thread • Straight Lengths: 5.75", 9", 13"/140mm, 230mm, 330mm • 90˚ Elbows • Standard Short • Low Profile Short • Standard Long • Low Profile Long (Short elbows typically used with concealed sprinklers. Long elbows typically used with recessed pendent sprinklers) Brackets • Style AB2 for suspended and hard-lid ceilings and sidewalls, allows for vertical sprinkler adjustment, and installation before most ceiling tiles in place • Style AB3 for surface mount applications, wood, metal and block walls, or ceilings • Style AB4 for hard-lid ceilings with hat furring channel grid systems, allows for vertical sprinkler adjustment • Style AB5 for hard-lid ceilings and sidewalls, allows for vertical sprinkler adjustment • Style AB7 for suspended and hard-lid ceilings • Style AB7 Adjustable for suspended and hard-lid ceilings • Style AB10 for Armstrong® TechZone™ ceilings • Style AB11 for lay-in panel suspended t-grid ceilings or drywall suspended t-grid ceilings, allows for low profile installations (use only with 90° low profile elbows) • Style AB12 for suspended and hard-lid ceilings, allows for vertical sprinkler adjustment, and allows for low profile installation down to 4"/100mm. • Style ABBA bracket for suspended, exposed, and hard-lid ceilings • Style ABMM bracket for surface mount and stand off-mount applications, wood, metal and block walls, or ceilings and hard-lid ceilings • Strut channel and pipe clamp, not supplied by Victaulic Maximum Working Temperature • 225°F/107°C • 150°F/65°C (No. 116 CPVC Adapter) Maximum Working Pressure • 200 psi/1375 kPa (FM Approval) • 175 psi/1206 kPa (cULus Listed) • 1600 kPa/232 psi (VdS/LPCB Approved) • 1.4 MPa (CCCf Approved) • 175 psi/1206 kPa (No. 116 CPVC Adapter) Minimum Bend Radius • 7"/178 mm (FM/CCCf Approval) • 2"/51 mm (cULus Listed) • 3"/76.2 mm (VdS/LPCB Approved) 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 3 victaulic.com 1.0 PRODUCT DESCRIPTION (CONTINUED) Maximum Allowable Sprinkler K-Factors • FM (1/2"/15 mm reducer) K5.6/8,1 (S.I.), (¾"/20 mm reducer) K14.0/20,2 (S.I.) • cULus (1/2"/15 mm reducer) K8.0/11,5 (S.I.), (¾"/20 mm reducer) K14.0/20,2 (S.I.) • VdS/LPCB (1/2"/15 mm reducer) K5.6/8,1 (S.I.), (¾"/20 mm reducer) K8.0/11,5 (S.I.) 2.0 CERTIFICATION/LISTINGS LPS 1261: Issue 1.2Cert/LPCB Ref. 104l/01 104l/04 NOTE • The VicFlex Series AH2 Hose has been tested and evaluated by Spears® for acceptable use with Spears® CPVC Products and is therefore covered under the Spears® FlameGuard® Installer Protection Plan. 3.0 SPECIFICATIONS – MATERIAL Series AH2: Flexible Hose: 300-series Stainless Steel Collar/Weld Fitting: 300-series Stainless Steel Gasket Seal: Victaulic EPDM Isolation Ring: Nylon Nut and Nipple: Carbon Steel, Zinc-Plated Reducer (½"/15 mm or ¾"/20 mm): Carbon Steel, Zinc-Plated Low Profile Elbows: Ductile Iron, Zinc-Plated Brackets: Carbon Steel, Zinc-Plated Series AH2-CC: Flexible Hose: 300-series Stainless Steel Collar/Weld Fitting: 300-series Stainless Steel Gasket Seal: Victaulic EPDM Isolation Ring: Nylon Coupling Retainer Ring: Polyethelene Nut: Carbon Steel, Zinc-Plated Reducer (½"/15 mm or ¾"/20 mm): Carbon Steel, Zinc-Plated Low Profile Elbows: Ductile Iron, Zinc-Plated Housing: Ductile iron conforming to ASTM A 536, Grade 65-45-12. Ductile iron conforming to ASTM A 395, Grade 65-45-15, is available upon special request. Coupling Housing Coating: • Orange enamel (North America, Asia Pacific). • Red enamel (Europe). • Hot dipped galvanized. Gasket:1 Grade “E" EPDM (Type A) FireLock EZ products have been Listed by Underwriters Laboratories Inc., Underwriters Laboratories of Canada Limited, and Approved by Factory Mutual Research for wet and dry (oil free air) sprinkler services within the rated working pressure. 1 Services listed are General Service Guidelines only. It should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. Bolts/Nut: Zinc electroplated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A 449 and physical requirements of ASTM A 183. Linkage: CrMo Alloy Steel zinc electroplated per ASTM B633 Zn/Fe 5, Type III Finish No. 116 Adapter Fitting: CPVC and Brass Seal: Victaulic EPDM 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 4 victaulic.com 4.0 DIMENSIONS Product Details - Series AH2 Braided Hose B 371 2 4685 9 A Item Description 1 Flexible Hose2Isolation Ring3Gasket4Nut5Adapter Nipple6Braid7Collar/Weld Fitting8Sleeve9Reducer Hose Length Dimensions Hose Length A B inches mm inches mm inches mm 31 790 25.3 641 31 790 36 915 31.3 794 36 915 48 1219 42.3 1073 48 1220 60 1525 54.3 1378 60 1525 72 1830 66.3 1683 72 1830 Series AH2-CC Braided Hose BA 3712 4 968 5 Hose Length A B inches mm inches mm inches mm 31 790 24.5 622 29.8 757 36 915 29.5 749 34.8 884 48 1219 41.5 1054 46.8 1189 60 1525 53.5 1359 58.8 1494 72 1830 65.5 1664 70.8 1798 Item Description 1 Flexible Hose2Isolation Ring3Gasket4Nut5Captured Coupling6Braid7Collar/Weld Fitting8Sleeve9Reducer 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5 victaulic.com 4.0 DIMENSIONS (CONTINUED) Standard Reducer 12345.75"/140 mm straight reducer Optional Reducers 9.0"/229 mm straight reducer 2.62"/ 66.5 mm 4.83"/ 122.7 mm 3.25"/ 82.6 mm 5.50"/ 139.7 mm 6.57"/ 166.9 mm 2.62"/66.5 mm 7.25"/ 184.2 mm 5.00"/ 127.0 mm 13.0"/330 mm straight reducer Short 90° elbow reducer Long 90° elbow reducer NOTE • The Short 90° elbow reducer is typically used with concealed sprinklers while the longer 90° elbow is typically used in the installation of recessed pendent sprinklers. • FM/VdS Approved only. Low Profile 2.84"/ 72 mm 3.50"/ 89 mm1.88"/48 mm 1.4"/ 36 mm 1.4"/ 36 mm 4.59"/116 mm3.63"/92 mm 5.25"/133 mm Short 90° elbow reducer Long 90° elbow reducer NOTE • Style AB11: When low profiles elbows are with the Style AB11 bracket, the Low Profile Short Elbow is typically used with concealed sprinklers while the Low Profile Long Elbow is typically used in the installation of recessed pendent sprinklers. No. 116 CPVC Adapter E to E NOTES • E to E is 3.0"/76.0 mm • The No. 116 CPVC Adapter has 2 ft. (0.6 m) EQL of 1" Schedule 40 pipe. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 6 victaulic.com 4.1 DIMENSIONS VicFlex Brackets Style AB2 • Suspended Ceilings • Hard-Lid Ceilings Item Description 1 24"/610 mm or 48"/1219 mm Square Bar 2 Patented Vertically Adjustable Center Bracket 3 End Bracket NOTE • Both sizes FM/VdS/LPCB Approved, cULus listed Style AB3 • Surface Mount Applications • FM/LPCB Approved Style AB4 • Hard-Lid Ceilings with Hat furring channel grid system Item Description 1 24"/610 mm or 48"/1219 mm Square Bar 2 Patented Vertically Adjustable Center Bracket 3 End Bracket for Hat Furring Channel NOTE • Both sizes FM/VdS/LPCB Approved, cULus listed. 3 2 1 3 3 3 2 1 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 7 victaulic.com 4.2 DIMENSIONS VicFlex Brackets Style AB5 • Hard-Lid Ceilings Item Description 1 24"/610 mm or 48"/1219 mm Square Bar 2 Patented Vertically Adjustable Center Bracket 3 End Bracket NOTE • Both sizes FM/VdS/LPCB Approved, cULus listed. Style AB7 • Suspended Ceilings • Hard-Lid Ceilings Item Description 1 24"/610 mm or 48"/1219 mm Square Bar 2 Patented 1-Bee2® Center Bracket 3 End Bracket NOTE • Both sizes FM/VdS/LPCB Approved. Style AB7 Adjustable • Suspended Ceilings • Hard-Lid Ceilings Item Description 1 700 mm or 1400 mm Square Bar 2 Patented 1-Bee2® Center Bracket 3 End Bracket (adjustable) NOTE • Both sizes FM/VdS/LPCB Approved. 3 2 1 3 3 2 1 3 3 2 1 3 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 8 victaulic.com 4.3 DIMENSIONS VicFlex Brackets Style AB10 • Suspended ceilings • Armstrong® TechZone™ Item Description 1 6"/152 mm Square Bar 2 Patented 1-Bee2® Center Bracket 3 End Bracket NOTE • FM/VdS/LPCB Approved, cULus listed. Style AB11 • Suspended ceilings • Hard-Lid ceilings Item Description 1 24"/610 mm or 48"/1219 mm Square Bar 2 Patented 1-Bee2® Center Bracket 3 End Bracket NOTE • FM/VdS Approved, cULus listed. Style AB12 • Suspended ceilings • Hard-Lid ceilings Item Description 1 Style AB12 Bracket Body 2 #2 Square Drive Set Screw NOTE • FM/VdS Approved. 3 2 1 3 3 2 1 3 2 1 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 9 victaulic.com 4.3 DIMENSIONS (CONTINUED) VicFlex Brackets Style ABBA • Floor-above mount • Cantilever mount • Temporary mount in exposed ceilings Item Description 1 Style ABBA Mounting Plate 2 Style ABBA Square Bar 3 Cap Screw, Serated Flange, M6 x 1 x 20, T25 Torx Drive Recessed 4 Style ABMM Bracket Body 5 Cap Screw, Serated Flange, M6 x 1 x 15.24, T25 Torx Drive Recessed NOTE • FM Approved. Style ABMM • Surface mount • Stand-off mount Item Description 1 Style ABMM Bracket Body 2 Cap Screw, Serated Flange, M6 x 1 x 15.24, T25 Torx Drive Recessed NOTE • FM Approved. 2 4 3 1 5 2 1 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 10 victaulic.com 4.4 DIMENSIONS Clearances Series AH2 Braided Hose and Style AB2 Bracket RSee Table L V2707 ¾"/19 MM MAX. RECESS V2707 MAX. EXTENSION 1.7"/43 mmTypical ceiling grid 24"/610 mm or 48"/1219 mm on Center /"/15.9 mmTypical ceiling tile See note Finished surface Bracket AssemblyStyle AB2 2⁄"/60.33 mm 2"/50.80 mm 4.3"/111 mm Hose Clearance Chart Straight Reducer Long Elbow Short Elbow V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm "R" Minimum Bend Radius 2.0 50 3.0 80 7.0 175 – "A" Minimum Required Installation Space 8.6 218 10.1 269 9.6 244 11.1 281 13.6 345 15.1 383 5.8 147 5.8 147 NOTE • Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 11 victaulic.com 4.5 DIMENSIONS Clearances Series AH2 Braided Hose and Style AB2 Bracket ASee Chart V38 ½"/13 mm MAX. RECESS V38 MAX. EXTENSION 1.8"/45 mm Typical 16"/406 mm C/C /"/16 mmTypical drywall #10 Screw Finished ceiling BracketAssemblyStyle AB2 2⁄"/68 mmmax. hole 2⁄"/60 mmmin. hole 3½"/89 mm RSee chart 2" × 4"Stud Hose Clearance Chart Straight Reducer V2707 ¾" | 20 mm Max Recess" V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall V2707 ¾" | 20 mm Max Recess V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall V2707 ¾" | 20 mm Max Recess V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm "R" Minimum Bend Radius 2.0 50 3.0 80 7.0 175 "A" Minimum Required Installation Space 6.2 158 7.6 193 6.1 155 7.2 183 8.6 218 7.1 180 11.2 285 12.6 320 11.1 282 Hose Clearance Chart Long Elbow Short Elbow V2707 ¾" | 20 mm Max Recess V2709 ¾" | 20 mm Sidewall V3802 ½" | 13 mm Max Recess inches mm inches mm inches mm "R" Minimum Bend Radius – "A" Minimum Required Installation Space 3.3 84 3.6 91 3.3 84 NOTE • Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 12 victaulic.com 4.6 DIMENSIONS Clearances Series AH2 Braided Hose and Style AB4 Bracket RSee chart ASee Chart V27 ¾"/19 mm MAX. RECESS V27 MAX. EXTENSION ⁄"/16 mmTypical drywall ⁄"/23 mm Typical 16"/406 mm C/C #10 Screw Typical Hat Channel grid Finished ceiling 2⁄"/60 mmmax. hole 2"/51 mmmin. hole 4.1"/104 mm Bracket assemblyStyle AB4 Hose Clearance Chart Straight Reducer Long Elbow Short Elbow V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess V2707 ¾" Max Recess V3802 ½" Max Recess inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm "R" Minimum Bend Radius 2.0 50 2.0 50 3.0 80 3.0 80 7.0 175 7.0 175 – "A" Minimum Required Installation Space 8.8 224 10.2 259 9.8 249 11.2 285 13.8 351 15.2 386 8.0 203 5.9 150 NOTE Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 13 victaulic.com 4.7 DIMENSIONS Clearances Series AH2 Braided Hose and Style AB5 Bracket ASee chart Finished ceiling 2 ⁄"/60 mmmax. hole /"/16 mmTyp. Drywall 2"/51 mmmin. hole3⁄"/92 mm Typical 16"/406 mm C/C 2.3"/57 mm V27 ¾"/19 mm MAX. RECESS 2" × 4"metal stud BracketassemblyStyle AB5 V27 MAX. EXTENSION RSee chart Hose Clearance Chart Straight Reducer "V2707 ¾" | 20 mm Max Recess" V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall V2707 ¾" | 20 mm Max Recess V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall V2707 ¾" | 20 mm Max Recess V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm "R" Minimum Bend Radius 2.0 50 3.0 80 7.0 175 "A" Minimum Required Installation Space 6.0 158 7.7 196 6.1 155 7.0 178 8.7 221 7.1 180 11.0 279 12.7 323 11.1 282 Hose Clearance Chart Long Elbow Low-Profile Long Elbow Short Elbow V2707 ¾" | 20 mm Max Recess V3802 ½" | 13 mm Max Recess V2709 ¾" | 20 mm Sidewall V3802 ½" | 13 mm Max Recess V3802 ½" | 13 mm Max Recess inches mm inches mm inches mm inches mm inches mm "R" Minimum Bend Radius – "A" Minimum Required Installation Space 3.5 89 4.9 124 3.6 91 2.9 74 3.3 84 NOTE • Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 14 victaulic.com 4.8 DIMENSIONS Clearances Series AH2 Braided Hose and Style AB11 Bracket (LOW PROFILE SOLUTION) ASee Chart See Note 1.7"/43 mm Typical ceiling grid 24"/610 mm or 48"/1219 mm on center Finished ceiling face Bracket AssemblyStyle AB11 2⁄"/60 mmmax. hole 2"/51 mmmin. hole 2⁄"/68 mmmax. hole 2⁄"/60 mmmin. hole 3.0"/76 mm /"/15.9 mmTypical ceiling tile V38V27Pendent Hose Clearance Chart Low-Profile Long Elbow Low-Profile Short Elbow V2707 ¾" | 20 mm Max Recess" V3802 ½" | 13 mm Max Recess inches mm inches mm "A" Minimum Required Installation Space 4.0 102 3.9 99 NOTE • Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 15 victaulic.com 4.9 DIMENSIONS Clearances Style AB12 and ABBA Bracket Suspended Ceiling Grid with Recessed Sprinkler with Low Profile Short Elbow Suspended Ceiling Grid with Recessed Sprinkler and Straight 5.75"/140 mm Reducer "A"See Table 1⁄ inch/29 mm Finished Face of /-inch/16-mmTypical Ceiling Unnished Ceiling Face "B" See Table ⁄ inch/3 mm V2707 ½"/12.7 mm MAX. RECESS V2707 ¾"/19 mm MAX. RECESS Unnished Ceiling Face R "A"See Table 1⁄ inch/29 mm Finished Face of /-inch/16-mmTypical Ceiling "B" See Table Nominal length 14"/355.6 mm ⁄ inch/3 mm Dimension Low Profile Short Elbow Low Profile Long Elbow Standard Short Elbow Standard Long Elbow Standard Straight Reducer ¾"/19 mm Recessed*Concealed ¾"/19 mm Recessed Concealed ¾"/19 mm Recessed Concealed ¾"/19 mm Recessed Concealed ¾"/19 mm Recessed Concealed inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm A Minimum Required Installation Space 4.0 101.6 5.5 139.7 5.6 142.2 7.2 182.9 5.9 149.9 7.5 190.5 7.7 195.6 9.3 236.2 15.0 381.0 16.6 421.6 B Distance from Top of Typical Ceiling Tile to Bottom of Gate 0.5 12.7 2.0 50.8 1.5 38.1 1.5 38.1 1.5 38.1 1.5 38.1 3.0 76.2 3.0 76.2 3.0 76.2 3.0 76.2 * Adjustability will be limited Style ABMM Bracket Stand-off Dimensions 3.93"/ 100 mm 3.94"/ 100 mm 2.94"/ 75 mm 2.22"/ 56 mm 0.28"/ 7 mm 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 16 victaulic.com 4.10 DIMENSIONS Clearances Style AB3 and ABMM Bracket Surface Mount Application with Recessed Sprinkler R C B 3¾"/95.3 mm A 2⁄"/60 mmmax. hole 2"/51 mmmin. hole Hose Clearances Dimension inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm Wall Thickness "A"2 50 4 100 6 150 8 200 10 250 2 50 4 100 6 150 8 200 10 250 Outlet Length "B"5.75 146.1 9 228.6 13 330.2 5.75 146.1 9 228.6 13 330.2 9 228.6 13 330.2 13 330.2 13 330.2 5.75 146.1 9 228.6 13 330.2 5.75 146.1 9 228.6 13 330.2 9 228.6 13 330.2 13 330.2 13 330.2 Hose Clearance "C"11.6 294 14.8 376 18.8 478 9.6 243 12.8 325 16.8 427 10.8 275 14.8 376 12.8 325 10.8 275 12.6 319 15.8 402 19.8 503 10.6 268 13.8 351 17.8 452 11.8 300 15.8 402 13.8 351 11.8 300 Bend Radius "R"7 175 8 200 NOTE • Variations of ceiling grids, sprinkler heads, brackets, and hoses are permitted but may result in clearance differences from the figures above. 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 17 victaulic.com 4.11 DIMENSIONS BRANCHLINE CLEARANCES Series AH2 Braided Hose with Style 922 threaded outlet Series AH2-CC Braided Hose with Style 922 grooved outlet RSee chart ASee chart Style 922 Threaded Mechanical Tee Outlet 2"/50 mm RSee chart ASee chart Style 922 GroovedMechanical Tee Outlet 2"/50 mm Hose Clearance Chart Hose Clearance Chart Dimension Dimension inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm R Minimum Bend Radius 3 80 4 100 5 125 6 150 7 175 R Minimum Bend Radius 3 80 4 100 5 125 6 150 7 175 A Min.9.4 238 10.4 263 11.4 289 12.4 314 13.4 339 A Min.7.7 197 8.7 222 9.7 247 10.7 273 11.7 298 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 18 victaulic.com 4.12 DIMENSIONS BRANCHLINE CLEARANCES Series AH2 Braided Hose with female threaded outlet Series AH2-CC Braided Hose with grooved outlet Female Threaded Weld Outlet RSee chart ASee chart 2"/50 mm RSee chart ASee chart No. 142 Grooved Weld Outlet 2"/50 mm Hose Clearance Chart Hose Clearance Chart Dimension Dimension inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm R Minimum Bend Radius 3 80 4 100 5 125 6 150 7 175 R Minimum Bend Radius 3 80 4 100 5 125 6 150 7 175 A Min.9.4 239 10.4 264 11.4 290 12.4 315 13.41 341 A Min.8.1 205 9.1 231 10.1 256 11.1 281 12.1 307 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.0 PERFORMANCE – FRICTION LOSS DATA Series AH2 and AH2-CC Braided Hoses with Straight 5.75"/140 mm Reducers Style AB2, AB4, AB5 and AB10 Brackets Hose Reducer UL Length Nominal Outlet Size Equivalent Length of 1"/33.7mm Sch. 40 pipe inches mm Type inches DN feet meters Max Bends 31 Straight 1/2 15.0 3790DN154.6 31 Straight 1/2 16.0 4790DN154.9 31 Straight 3/4 19.0 3790DN205.8 31 Straight 3/4 20.0 4790DN206.1 36 Straight 1/2 18.0 3915DN155.5 36 Straight 1/2 21.0 5915DN156.4 36 Straight 3/4 21.0 3915DN206.4 36 Straight 3/4 23.0 5915DN207.0 48 Straight 1/2 21.0 31220DN156.4 48 Straight 1/2 32.0 81220DN159.8 48 Straight 3/4 26.0 31220DN207.9 48 Straight 3/4 37.0 81220DN2011.3 60 Straight 1/2 27.0 31525DN158.2 60 Straight 1/2 46.0 101525DN1514.0 60 Straight 3/4 27.0 31525DN208.2 60 Straight 3/4 46.0 101525DN2014.0 72 Straight 1/2 31.0 31830DN159.4 72 Straight 1/2 55.0 121830DN1516.8 72 Straight 3/4 30.0 31830DN209.1 72 Straight 3/4 60.0 121830DN2018.3 19 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.0 PERFORMANCE – FRICTION LOSS DATA (CONTINUED) Series AH2 and AH2-CC Braided Hose with 90° Low Profile Elbows Style AB11 VicFlex Bracket Hose Reducer UL Length Nominal Outlet Size Equivalent Length of 1"/33.7mm Sch. 40 pipe inchesmm Type inchesDN feetmeters Max Bends 31 LP Elbow 1/2 18.0 3790DN155.5 31 LP Elbow 1/2 24.0 4790DN157.3 31 LP Elbow 3/4 21.0 3790DN206.4 31 LP Elbow 3/4 24.0 4790DN207.3 36 LP Elbow 1/2 19.0 3915DN155.8 36 LP Elbow 1/2 26.0 5915DN157.9 36 LP Elbow 3/4 23.0 3915DN207.0 36 LP Elbow 3/4 28.0 5915DN208.5 48 LP Elbow 1/2 23.0 31220DN157.0 48 LP Elbow 1/2 43.0 81220DN1513.1 48 LP Elbow 3/4 30.0 31220DN209.1 48 LP Elbow 3/4 42.0 81220DN2012.8 60 LP Elbow 1/2 28.0 31525DN158.5 60 LP Elbow 1/2 49.0 101525DN1514.9 60 LP Elbow 3/4 31.0 31525DN209.4 60 LP Elbow 3/4 50.0 101525DN2015.2 72 LP Elbow 1/2 31.0 31830DN159.4 72 LP Elbow 1/2 65.0 121830DN1519.8 72 LP Elbow 3/4 36.0 31830DN2011.0 72 LP Elbow 3/4 63.0 121830DN2019.2 20 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.0 PERFORMANCE – FRICTION LOSS DATA (CONTINUED) Series AH2 and AH2-CC Braided Hoses Equivalent Length Design Guide Equivalent length values at various numbers of 90 degree bends at 2"/51 mm center line bend radius Length Nominal Outlet Size 1 Bend 2 Bends 3 Bends 4 Bends 5 Bends 6 Bends 7 Bends 8 Bends 9 Bends 10 Bends 11 Bends 12 Bends inchesmm inchesDN feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters feetmeters 31 1/2 11.0 13.0 15.0 16.0 ––––––––790 DN15 3.4 4.0 4.6 4.9 31 3/4 12.0 14.0 19.0 20.0 ––––––––790 DN20 3.7 4.3 5.8 6.1 36 1/2 14.0 16.0 18.0 19.0 21.0 –––––––915 DN15 4.3 4.9 5.5 5.8 6.4 36 3/4 17.0 19.0 21.0 22.0 23.0 –––––––915 DN20 5.2 5.8 6.4 6.7 7.0 48 1/2 18.0 19.0 21.0 23.0 25.0 27.0 30.0 32.0 ––––1220 DN15 5.5 5.8 6.4 7.0 7.6 8.2 9.1 9.8 48 3/4 21.0 24.0 26.0 28.0 31.0 33.0 35.0 37.0 ––––1220 DN20 6.4 7.3 7.9 8.5 9.4 10.1 10.7 11.3 60 1/2 21.0 24.0 27.0 30.0 32.0 35.0 37.0 40.0 43.0 46.0 ––1525 DN15 6.4 7.3 8.2 9.1 9.8 10.7 11.3 12.2 13.1 14.0 60 3/4 23.0 25.0 27.0 29.0 32.0 34.0 37.0 40.0 43.0 46.0 ––1525 DN20 7.0 7.6 8.2 8.8 9.8 10.4 11.3 12.2 13.1 14.0 72 1/2 27.0 29.0 31.0 34.0 37.0 40.0 43.0 46.0 48.0 50.0 52.0 55.0 1830 DN15 8.2 8.8 9.4 10.4 11.3 12.2 13.1 14.0 14.6 15.2 15.8 16.8 72 3/4 26.0 28.0 30.0 33.0 37.0 40.0 44.0 48.0 51.0 54.0 57.0 60.0 1830 DN20 7.9 8.5 9.1 10.1 11.3 12.2 13.4 14.6 15.5 16.5 17.4 18.3 NOTES • Values for use with 5.75"/140 mm straight reducers. • The values in this table are provided by the manufacturer for reference only. For friction loss data in accordance with the UL Certification, please refer to pages 19 and 20 of this publication. How to use this Design Guide: • For some systems, it may be advantageous for the designer to calculate the system hydraulics using shorter equivalent lengths associated with fewer than the maximum allowable number of bends. In this case, the designer may select a design number of bends for the job and use the associated equivalent length from the design guide to determine the system hydraulics. • It is possible that the actual installed condition of some of the flexible drops may have more bends than the designer selected. When this happens, the design guide may be used to find equivalent lengths based on the actual installed number of bends for particular sprinkler installations. The system hydraulics can be recalculated using actual equivalent lengths to verify the performance of the system. 21 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.1 PERFORMANCE – FRICTION LOSS DATA Series AH2 and AH2-CC Braided Hoses Style AB2, AB3, AB4, AB5, AB7, AB7 Adj., AB8, AB10, AB12, ABBA and ABMM VicFlex Brackets Length of Stainless Steel Flexible Hose K-Factor Outlet Size Equivalent Length of 1"/33.7 mm Sch. 40 Pipe Maximum Number of 90° Bends at 7"/178 mm Bend Radius inches mm Imperial S.I. inches mm type feet meters 31 790 5.6 8.1 1/2 15 Straight 13.8 4.2 21/2 15 90˚ Elbow 23.5 7.1 36 915 5.6 8.1 1/2 15 Straight 16.6 5.1 21/2 15 90˚ Elbow 25.6 7.8 48 1220 5.6 8.1 1/2 15 Straight 23.4 7.1 31/2 15 90˚ Elbow 30.7 9.3 60 1525 5.6 8.1 1/2 15 Straight 30.2 9.2 41/2 15 90˚ Elbow 35.9 10.9 72 1830 5.6 8.1 1/2 15 Straight 37.0 11.3 41/2 15 90˚ Elbow 41.1 12.5 31 790 8.0 11.5 3/4 20 Straight 16.8 5.1 23/4 20 90˚ Elbow 16.8 5.1 36 915 8.0 11.5 3/4 20 Straight 20 6.0 23/4 20 90˚ Elbow 19.7 6.0 48 1220 8.0 11.5 3/4 20 Straight 27.8 8.4 33/4 20 90˚ Elbow 26.6 8.1 FM NOTES • The Series AH2 hose has been tested and Approved by FM Global for use in wet, dry and preaction systems per NFPA 13, 13R, and 13D and FM data sheets 2-0, 2-5, and 2-8. FM 1637 standard for safety include, but are not limited to, pressure cycling, corrosion resistance, flow characterisitics, vibration resistance, leakage, mechanical and hydrostatic strength. • EXAMPLE: A 48-inch hose installed with two 30° bends and two 90° bends is permitted and considered equivalent to the data in the table shown above. In this example, the total number of degrees is 240°, which is less than the allowable 270°. 22 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.1 PERFORMANCE – FRICTION LOSS DATA (CONTINUED) Series AH2 and AH2-CC Braided Hoses Style AB2, AB3, AB4, AB5, AB7, AB7 Adj., AB8, AB10, AB12, ABBA and ABMM VicFlex Brackets Length of Stainless Steel Flexible Hose K-Factor Outlet Size Equivalent Length of 1"/33.7 mm Sch. 40 Pipe Maximum Number of 90° Bends at 7"/178 mm Bend Radius inches mm Imperial S.I. inches mm type feet meters 60 1525 8.0 11.5 3/4 20 Straight 35.7 10.9 43/4 20 90˚ Elbow 33.6 10.2 72 1830 8.0 11.5 3/4 20 Straight 43.5 13.2 43/4 20 90˚ Elbow 40.6 12.2 31 790 11.2 16.1 3/4 20 Straight 16.5 5.0 23/4 20 90˚ Elbow 17.8 5.4 36 915 11.2 16.1 3/4 20 Straight 19.5 5.9 23/4 20 90˚ Elbow 20.7 6.3 48 1220 11.2 16.1 3/4 20 Straight 26.7 8.1 33/4 20 90˚ Elbow 27.9 8.5 60 1525 11.2 16.1 3/4 20 Straight 33.9 10.3 43/4 20 90˚ Elbow 35 10.7 72 1830 11.2 16.1 3/4 20 Straight 41.3 12.5 43/4 20 90˚ Elbow 42.2 12.8 31 790 14.0 20.2 3/4 20 Straight 14.9 4.5 23/4 20 90˚ Elbow 15.5 4.72 FM NOTES • The Series AH2 hose has been tested and Approved by FM Global for use in wet, dry and preaction systems per NFPA 13, 13R, and 13D and FM data sheets 2-0, 2-5, and 2-8. FM 1637 standard for safety include, but are not limited to, pressure cycling, corrosion resistance, flow characterisitics, vibration resistance, leakage, mechanical and hydrostatic strength. • EXAMPLE: A 48-inch hose installed with two 30° bends and two 90° bends is permitted and considered equivalent to the data in the table shown above. In this example, the total number of degrees is 240°, which is less than the allowable 270°. 23 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.1 PERFORMANCE – FRICTION LOSS DATA (CONTINUED) Series AH2 and AH2-CC Braided Hoses Style AB2, AB3, AB4, AB5, AB7, AB7 Adj., AB8, AB10, AB12, ABBA and ABMM VicFlex Brackets Length of Stainless Steel Flexible Hose K-Factor Outlet Size Equivalent Length of 1"/33.7 mm Sch. 40 Pipe Maximum Number of 90° Bends at 7"/178 mm Bend Radius inches mm Imperial S.I. inches mm type feet meters 36 915 14.0 20.2 3/4 20 Straight 19.4 5.9 23/4 20 90˚ Elbow 19.6 5.9 48 1220 14.0 20.2 3/4 20 Straight 30.3 9.2 33/4 20 90˚ Elbow 29.5 8.9 60 1525 14.0 20.2 3/4 20 Straight 33.9 10.3 43/4 20 90˚ Elbow 34.1 10.4 72 1830 14.0 20.2 3/4 20 Straight 37.5 11.4 43/4 20 90˚ Elbow 38.6 11.7 FM NOTES • The Series AH2 hose has been tested and Approved by FM Global for use in wet, dry and preaction systems per NFPA 13, 13R, and 13D and FM data sheets 2-0, 2-5, and 2-8. FM 1637 standard for safety include, but are not limited to, pressure cycling, corrosion resistance, flow characterisitics, vibration resistance, leakage, mechanical and hydrostatic strength. • EXAMPLE: A 48-inch hose installed with two 30° bends and two 90° bends is permitted and considered equivalent to the data in the table shown above. In this example, the total number of degrees is 240°, which is less than the allowable 270°. 24 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.2 PERFORMANCE – FRICTION LOSS DATA Series AH2 Braided Hose with 90° Low Profile Elbows Style AB5, AB11, AB12, ABBA and ABMM VicFlex Bracket Length of Stainless Steel Flexible Hose K-Factor Outlet Size Equivalent Length of 1"/33.7mm Sch. 40 Pipe Maximum Number of 90° Bends at 7"/178mm Bend Radius inches mm Imperial S.I.inches mm feet meters 31 790 5.6 8.1 1/2 15 13.7 4.2 2 36 915 5.6 8.1 1/2 15 17.0 5.2 2 48 1220 5.6 8.1 1/2 15 25.0 7.6 3 60 1525 5.6 8.1 1/2 15 33.0 10.1 4 72 1830 5.6 8.1 1/2 15 41.1 12.5 4 31 790 8.0 11.5 3/4 20 13.6 4.14 2 36 915 8.0 11.5 3/4 20 16.9 5.2 2 48 1220 8.0 11.5 3/4 20 27.8 8.5 3 60 1525 8.0 11.5 3/4 20 32.6 9.9 4 72 1830 8.0 11.5 3/4 20 40.6 12.4 4 31 790 11.2 16.1 3/4 20 13.7 4.2 2 36 915 11.2 16.1 3/4 20 17.0 5.2 2 48 1220 11.2 16.1 3/4 20 24.9 7.6 3 60 1525 11.2 16.1 3/4 20 32.9 10.0 4 72 1830 11.2 16.1 3/4 20 40.9 12.5 4 31 790 14.0 20.2 3/4 20 13.5 4.1 2 36 915 14.0 20.2 3/4 20 16.8 5.1 2 48 1220 14.0 20.2 3/4 20 24.7 7.5 3 60 1525 14.0 20.2 3/4 20 32.7 9.9 4 72 1830 14.0 20.2 3/4 20 40.7 12.4 4 FM NOTES • The Series AH2 hose has been tested and Approved by FM Global for use in wet, dry and preaction systems per NFPA 13, 13R, and 13D and FM data sheets 2-0, 2-5, and 2-8. FM 1637 standard for safety include, but are not limited to, pressure cycling, corrosion resistance, flow characterisitics, vibration resistance, leakage, mechanical and hydrostatic strength. • EXAMPLE: A 48-inch hose installed with two 30° bends and two 90° bends is permitted and considered equivalent to the data in the table shown above. In this example, the total number of degrees is 240°, which is less than the allowable 270°. 25 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.3 PERFORMANCE – FRICTION LOSS DATA Series AH2 and AH2-CC Braided Hose Style AB2, AB4, AB5, AB7, AB7 Adj., AB8, AB10, AB11 and AB12 Brackets Length of Stainless Steel Flexible Hose Outlet Size Equivalent Length of steel pipe according to EN 10255 DN 25 (33,7 x 3,25)Maximum Number of 90º Bends at 3"/76.2 mm Bend Radiusmm inches DN inches meters feet 790 31 DN15 5.5 18.0 31/2 DN203/4 91536 DN15 6.4 21.0 31/2 DN20 3/4 122048 DN15 8.5 27.9 31/2 DN20 3/4 152560 DN15 10.7 35.1 41/2 DN20 3/4 183072 DN15 12.8 42.0 41/2 DN20 3/4 VdS Ceiling Manufacturers List AB2, AB7, AB10 ,AB11 AB4 AB5, AB8 1. AMF 2. Armstrong 3. Chicago Metallic 4. Dipling 5. Durlum 6. Geipel 7. Gema-Armstrong 8. Hilti 9. Knauf 10. Lafarge 11. Linder 12. Odenwald 13. Richter 14. Rigips 15. Rockfon Pagos 16. Suckow & Fischer 17. USG Donn No specific approval 1. Hilti 2. Knauf 3. Lafarge 4. Lindner 5. Rigips 26 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 5.3 PERFORMANCE – FRICTION LOSS DATA LPS 1261: Issue 1.2Cert/LPCB Ref. 104l/01 104l/04 Series AH2 and AH2-CC Braided Hose Style AB2, AB3, AB4, AB5, AB7, AB8, and AB10 Brackets Series AH2 Braided Hose Style AB2, AB3, AB4, AB5, AB7, AB8, AB10 and AB12 Brackets Length of Stainless Steel Flexible Hose Outlet Size Equivalent Length of steel pipe according to EN 10255 DN 25 (33,7 x 3,25) Maximum Number of 90º Bends at 3"/76.2 mm Bend Radius Length of Flexible Hose Equivalent Length of 1"/33.7 mm Sch. 40 Pipe Straight Configuration Bend Configuration mm inches mm inches type meters feet mm inches meters feet meters feet 790 31 15 mm 1/2 Straight 1.8 6.0 2 790 31 0.87 2.9 2.70 8.920 mm 3/4 Straight 915 36 15 mm 1/2 Straight 3.6 11.9 3 915 36 1.00 3.3 2.80 9.220 mm 3/4 Straight 1220 48 15 mm 1/2 Straight 4.3 14.0 3 1220 48 2.23 7.3 4.66 15.320 mm 3/4 Straight 1525 60 15 mm 1/2 Straight 4.1 13.6 3 1525 60 2.90 9.5 6.5 21.320 mm 3/4 Straight 1830 72 15 mm 1/2 Straight 5.5 18.1 3 1830 72 3.31 10.9 7.16 23.520 mm 3/4 Straight CCCF NOTE • Friction loss data is in accordance with GB5135.16 tested at a flow rate of 114 liters per minute (30 gallons per minute). 27 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 6.0 NOTIFICATIONS WARNING • Read and understand all instructions before attempting to install any Victaulic products. • Always verify that the piping system has been completely depres- surized and drained immediately prior to installation, removal, adjustment, or maintenance of any Victaulic products. • Wear safety glasses, hardhat, and foot protection. • These products shall be used only in fire protection systems that are designed and installed in accordance with current, applicable National Fire Protection Association (NFPA 13, 13D, 13R, etc.) standards, or equivalent standards, and in accordance with applicable building and fire codes. These standards and codes contain im- portant information regarding protection of systems from freezing temperatures, corrosion, mechanical damage, etc. • The installer shall understand the use of this product and why it was specified for the particular application. • The installer shall understand common industry safety standards and potential consequences of improper product installation. WARNING • It is the responsibility of the system designer to verify suitability of 300-series stainless steel flexible hose for use with the intended fluid media within the piping system and external environments. • The effect of chemical composition, pH level, operating temperature, chloride level, oxygen level, and flow rate on 300-series stainless steel flexible hose must be evaluated by the material specifier to confirm system life will be acceptable for the intended service. • It is the responsibility of the owner of a building or their authorized agent to provide the sprinkler system installer with any knowledge that the water supply might be contaminated with or conducive to the development of micro- biologically influenced corrosion (MIC), including as required by NFPA 13. Failure to identify adverse water quality issues may affect the VicFlex product and void the manufacturer’s warranty. Failure to follow these instructions could cause product failure, resulting in serious personal injury and/or property damage. Victaulic VicFlex Series AH2 and AH2-CC Flexible Sprinkler Fittings may be painted provided the paint is compatible with stainless steel and zinc-plated carbon steel or ductile iron. Care should be taken to ensure the sprinkler and associated escutcheon or coverplate are not painted. Victaulic VicFlex Series AH2 and AH2-CC penetrating through non-fire rated gypsum wall (drywall) will function as designed, provided the components are installed in accordance with the respective installation instructions referenced in this document. 28 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com 7.0 REFERENCE MATERIALS – CHARACTERISTICS VicFlex Maximum Load Values Series AH2 Hose with 24" Bracket Model Size Actual Length Total Load Max. Uniform Load ft m lb N lb/linear ft N/linear m 31/790 2.6 0.8 5.2 23 2.6 38 36/915 3 0.9 5.5 25 2.8 40 48/1220 4 1.2 6.3 28 3.1 46 60/1525 5 1.5 7.0 31 3.5 51 72/1830 6 1.8 7.7 34 3.9 57 Series AH2 Hose with 48" Bracket Model Size Actual Length Total Load Max. Uniform Load ft m lb N lb/linear ft N/linear m 31/790 2.6 0.8 6.1 27 1.5 22 36/915 3 0.9 6.4 29 1.6 23 48/1220 4 1.2 7.2 32 1.8 26 60/1525 5 1.5 7.9 35 2.0 29 72/1830 6 1.8 8.7 39 2.2 32 Total Load is defined as the sum of the weights of the following: • water-filled flexible sprinkler hose with threaded end fittings, including a typical fire sprinkler • bracket assembly (any applicable Victaulic bracket model of the relevant associated size) ASTM C 635: Suspension System Load-Carrying Capabilities (excerpted) Suspension System Actual Length Min. Allowable Uniform Load ft/m lb/linear ft N/linear m Direct Hung Light 5.0 75.7 Intermediate 12.0 181.0 Heavy 16.0 241.7 SUMMARY: All direct-hung suspension system duty classifications per ASTM C 635 are able to withstand the maximum water-filled weight of the VicFlex sprinkler hose and bracket. 29 victaulic.com 10.85 5839 Rev AL Updated 02/2022 © 2022 Victaulic Company. All rights reserved. victaulic.com User Responsibility for Product Selection and SuitabilityEach user bears final responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specifications, and the applicable building codes and related regulations as well as Victaulic performance, maintenance, safety, and warning instructions. Nothing in this or any other document, nor any verbal recommendation, advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale, installation guide, or this disclaimer. Intellectual Property Rights No statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidaries or affiliates covering such use or design, or as a recommendation for the use of such material, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries. NoteThis product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. Installation Reference should always be made to I-VICFLEX-AB1-AB2-AB10, I-VICFLEX-AB4, I-VICFLEX-AB7, or I-VICFLEX-AB8 for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at www.victaulic.com. Warranty Refer to the Warranty section of the current Price List or contact Victaulic for details. TrademarksVictaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries. 7.0 REFERENCE MATERIALS – CHARACTERISTICS (CONTINUED) Flexible Hose In-Plane Bend Characteristics One Bend Two Bends Three Bends 90° Minimum bend radius Minimum bend radius Minimumbend radius 2X Minimumbend radius OR Minimum bend radius Minimum bend radius Minimum bend radius 2XMinimumbend radius Minimum bend radius OR NOTE For out-of-plane (three-dimensional) bends, care must be taken to avoid imparting torque on the hose. I-VicFlex-AB1-AB2 I-VicFlex-AB3 I-VicFlex-AB4 I-VicFlex-AB5 I-VicFlex-AB7 I-VicFlex-AB12 I-VicFlex-ABBA I-VicFlex-ABMM I-RES 30 victaulic.com Model F1FR56 UprightModel F1FR56 Pendent Model F1FR56 Horizontal Sidewall Model F1FR56 Vertical Sidewall Note: Not all versions of the product are shown. F1FR Series Sprinkler Summary Sprinkler Model K-Factor gpm/psi1/2 (lpm/bar1/2)Orientation Listings & Approvals Max. Working Pressure psi (bar) Sprinkler Identification Number (SIN) F1FR56 5.6 (80) Upright Intermediate Upright cULus, FM, LPCB, VdS, EC, WM, UKCA 175 (12) 250 (17) (cULus only)RA1425 Pendent cULus, FM, LPCB, VdS, EC, WM, UKCA 175 (12) 250 (17) (cULus only)RA1414 Concealed Pendent cULus, VdS, EC, WM, UKCA 175 (12) 250 (17) (cULus only)RA1414 Horizontal Sidewall cULus, FM 175 (12) 250 (17) (cULus only)RA1435 Vertical Sidewall cULus, FM, LPCB, UKCA 175 (12)RA1485 Table A Note: This bulletin may contain information on New and Legacy sprinklers that reflects a dimensional change only. Sprinkler Iden- tification Number (SIN), application, performance, and listings/ approval are not otherwise affected. Sprinklers with New frames will include the suffix “N” in the order. Features • Standard coverage quick-response sprinklers • Upright, pendent, horizontal sidewall, and vertical sidewall deflectors • Low profile, compact design • Available in a wide variety of finishes Product Description Reliable Model F1FR56 series sprinklers are quick-response standard spray automatic fire sprinklers utilizing a sensitive 3.0 mm glass bulb thermal element. Pendent and horizontal sidewall sprinklers may be installed exposed or surface mounted using escutcheons such as the Reliable Models B, C, or HB (reference Technical Bulletin 204). When installed recessed or concealed, the Model F1FR56 series sprinklers are specifically listed with and may only be installed with listed Reliable escutcheons and cover plates. Refer to the technical information on the following pages for specific listings for recessed and concealed installations and refer to Figures 5 and 6 for dimensional information. When fitted with an approved water shield, these sprinklers may considered intermediate sprinklers for use in racks, below grated walkways, and other areas where intermediate level sprinklers are required. Table A provides a summary of the approvals and availability of specific Model F1FR series sprinkler configurations. Additional technical information for each sprinkler model is provided on the following pages. www.reliablesprinkler.com K-factor 5.6 (80) F1FR56 Series Quick Response Sprinklers Bulletin 074 January 2023 Model F1FR56 Upright Sprinkler SIN RA1425 Technical Specifications Style: Upright, Intermediate Upright Threads: 1/2” NPT or ISO 7-R1/2 Nominal K-Factor: 5.6 (80 metric) Max. Working Pressure: 175 psi (12 bar) 250 psi (17 bar) (cULus only) Material Specifications Thermal Sensor: 3 mm Glass Bulb Sprinkler Frame: Brass Alloy Cap: Bronze Alloy Sealing Washer: Nickel with PTFE Load Screw: Copper Alloy Deflector: Brass Alloy Sprinkler Finishes (See Table B) Sensitivity Quick response Temperature Ratings 135°F (57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C) 286°F (141°C) Guards & Shields (New Frames) Factory Water Shield (cULus, FM) F-1 Guard (cULus, FM) F-3 Guard with Shield (cULus, FM) Guards and Shields (Legacy Frames) Factory Water Shield C-1 Guard (FM) C-3 Guard with Shield (cULus, FM) D-1 Guard (cULus) D-3 Guard with Shield (cULus) Sprinkler Wrench Model W2 Model J (New frame with guard installed) Model JD (Legacy frame with guard installed) Listings and Approvals cULus Listed FM Approved LPCB VdS EC WM UKCA: 0832-UKCA-CPR-S5045 Model F1FR56 Upright Sprinkler Components and Dimensions Figure 1 Deflector Glass Bulb (3 mm) Wrench Flat Threads 1 3/8" [33mm] 3 1/4" [83mm] Cap/Seal Assembly Load Screw 2 1/4" [58mm] F1FR_HALF_UPR_INT Shown with Optional Factory Installed Water Shield ( Intermediate Upright) Bulletin 074 January 2023 Page 2 of 9 www.reliablesprinkler.com Model F1FR56 Pendent Sprinkler SIN RA1414 Technical Specifications Style: Pendent Recessed Pendent Concealed Pendent Threads: 1/2” NPT or ISO 7-R1/2 Nominal K-Factor: 5.6 (80 metric) Max. Working Pressure: 175 psi (12 bar) 250 psi (17 bar) (cULus only) Material Specifications Thermal Sensor: 3 mm Glass Bulb Sprinkler Frame: Brass Alloy Cap: Bronze Alloy Sealing Washer: Nickel with PTFE Load Screw: Copper Alloy Deflector: Brass Alloy Sprinkler Finishes (See Table B) Sensitivity Quick response Temperature Ratings(1) 135°F (57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C) 286°F (141°C) Recessed Escutcheons Model F1 (cULus, LPCB, VdS, CE, WM) Model F2 (cULus, FM, LPCB, VdS, CE, WM) Model FP (cULus, VdS, CE, WM) Cover Plate Model CCP (cULus, VdS(2), CE(2)) Guards & Shields (New Frames)(3) F-1 Guard (FM) F-5 Guard/Shield Kit (FM) F-7 Guard (cULus) F-8 Guard/Shield Kit (cULus) S-1 Shield (cULus, FM) Guards & Shields (Legacy Frames)(3) C-1 Guard (FM) C-5 Guard/Shield Kit (FM) D-1 Guard (cULus, FM) D-4 Guard/Shield Kit (FM) D-5 Guard/Shield Kit (cULus, FM) S-1 Shield (cULus, FM) Sprinkler Wrenches Model W2 (pendent) Model W4 (recessed or concealed) Model J (New frame with guard installed) Model JD (Legacy frame with guard installed) Listings and Approvals(4) cULus Listed FM Approved LPCB VdS EC WM UKCA: 0832-UKCA-CPR-S5045, 0831-UKCA-CPR-5072 (CCP) Notes: 1. 286°F (141°C) temperature rated sprinkler not listed for recessed or concealed use. 2. VdS and CE approval for CCP concealed use is for 155°C (68°C) sprinkler ONLY. 3. Not suitable for recessed or concealed pendent installations. 4. When used surface mounted or exposed. See Recessed Escutcheon and Cover Plate section for specific approvals when installed recessed or concealed. Model F1FR56 Pendent Sprinkler Components and Dimensions Figure 2 F1FR_HALF_PEND_INT Deflector Glass Bulb(3 mm) Wrench Flat Threads 3 1/4" [83mm] 2 1/4" [57mm] 1" [25mm]Load Screw Cap/SealAssembly Shown with Optional S-1 WaterShield (Ordered Separately) Note: Please refer to Figure 8 for recessed and concealed installation. Bulletin 074 January 2023 Page 3 of 9 www.reliablesprinkler.com Model F1FR56 Horizontal Sidewall Sprinkler SIN RA1435 Technical Specifications Style: Horizontal Sidewall Recessed Horizontal Sidewall Threads: 1/2” NPT or ISO 7-R1/2 Nominal K-Factor: 5.6 (80 metric) Max. Working Pressure: 175 psi (12 bar) 250 psi (17 bar) (cULus only) Material Specifications Thermal Sensor: 3 mm Glass Bulb Sprinkler Frame: Brass Alloy Cap: Bronze Alloy Sealing Washer: Nickel with PTFE Load Screw: Copper Alloy Deflector: Brass Alloy Sprinkler Finishes (See Table B) Sensitivity Quick response Temperature Ratings (1) 135°F (57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C) 286°F (141°C) Recessed Escutcheons(2) Model F1 (cULus) Model F2 (cULus, FM) Model FP (cULus) Guards & Shields (New Frames)(3) F-4 Guard (FM) F-7 Guard (cULus) Guards & Shields (Legacy Frames)(3) C1 Guard (FM) D1 Guard (cULus) Sprinkler Wrenches Model W2 (non-recessed) Model W4 (recessed)Model J (New frame with guard installed)Model JD (Legacy frame with guard installed) Listings and Approvals cULus Listed(4) FM Approved(5) Notes: 1. 286°F (141°C) temperature rated sprinkler not listed for recessed use. 2. FM approved recessed installation when used with Model F2 escutcheon ONLY. 3. Not suitable for recessed horizontal sidewall installations. 4. cULus Listed for Light and Ordinary Hazard when installed exposed or surface mounted. Listed for Light Hazard ONLY when installed recessed. 5. FM Approved for Light Hazard ONLY. Model F1FR56 Horizontal Sidewall Sprinkler Components and Dimensions Figure 3 Bulletin 074 January 2023 Page 4 of 9 www.reliablesprinkler.com F1FR_HALF_HSW 2 3/4" [70mm] 1 1/8" [28mm] Threads Cap/Seal Assembly Load ScrewDeflector Glass Bulb (3 mm) Wrench Flat Frame Note: Please refer to Figure 9 for recessed installation. Model F1FR56 Vertical Sidewall Sprinkler SIN RA1485 Technical Specifications Style: Upright Vertical Sidewall Pendent Vertical Sidewall Threads: 1/2” NPT or ISO 7-R1/2 Nominal K-Factor: 5.6 (80 metric) Max. Working Pressure: 175 psi (12 bar) Material Specifications Thermal Sensor: 3 mm Glass Bulb Sprinkler Frame: Brass Alloy Cap: Bronze Alloy Sealing Washer: Nickel with PTFE Load Screw: Copper Alloy Deflector: Brass Alloy Sprinkler Finishes (See Table B) Sensitivity Quick response Temperature Ratings 135°F (57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C) 286°F (141°C) Guards & Shields (New Frames) F-2 Guard (FM) Guards & Shields (Legacy Frames) C1 Guard (FM) Sprinkler Wrenches Model W2 Model J (New frame with guard installed) Model JD (Legacy frame with guard installed) Listings and Approvals(1) cULus Listed FM Approved LPCB(2) UKCA: 0832-UKCA-CPR-S5045 Notes: 1. Listed and approved for Light Hazard ONLY. 2. LPCB approved for use in pendent position ONLY. Model F1FR56 Vertical Sprinkler Components and Dimensions Figure 4 Bulletin 074 January 2023 Page 5 of 9 www.reliablesprinkler.com F1FR_HALF_VSW 2 1/4" [57mm] 1 1/2" [38mm] Threads Cap/Seal Assembly Load ScrewDeflector Glass Bulb (3 mm) Wrench Flat Frame Models F1 & F1FR Pendent Sprinkler with Model F1 Recessed Escutcheon 3/4" (19mm) Nominal Adjustment 2-7/8" (72 mm) Dia. 1-3/4"(44 mm) 2-1/4" (57 mm) Dia.Hole in Ceiling 1-15/16"(49 mm) Dia. Minimum Recess Maximum Recess 1"(25 mm) Face of Fitting to Face of Ceiling1-1/8" (29 mm) at Max. Recess 3/8" (10 mm) atMin. Recess Models F1 & F1FR Pendent Sprinklerwith Model FP Recessed Escutcheon1/2" (13mm) Nominal Adjustment 1" (25 mm) 2-5/16"(59 mm) Dia. MinimumRecess MaximumRecess 1/2" (12 mm) 3-3/16" (78 mm) Dia. Face of Fitting to Face of Ceiling 1-1/2" (38 mm) atMax. Recess 1" (25 mm) atMin. Recess 2-7/8" (72 mm) Dia. 1-3/4"(44 mm) Minimum Recess Maximum Recess 1-1/4" (32 mm) Face of Fittingto Face of Ceiling 7/8" (22 mm) at Max. Recess3/8" (10 mm) at Min. Recess 2-1/4" (57 mm) Dia.Hole in Ceiling 1-15/16"(49 mm) Dia. 2-1/2" (64 mm) Dia.Hole in Ceiling Models F1 & F1FR Pendent Sprinkler with Model F2 Recessed Escutcheon 1/2" (13mm) Nominal Adjustment ReducingFitting ReducingFitting ReducingFitting Note: Model FP recessed assemblies may not be used where thepressure in the space above the ceiling is positive with respect to the protected area. Ensure that the openings in the Model FP cupare unobstructed following installation. Vented Cup Model F1FR56 CCP Conical Concealed Sprinkler1/2" (13mm) Nominal Adjustment (Nominal Cover Plate Projection is 1" (25 mm)) 1" (25 mm) 2-5/16"(59 mm) Dia. MinimumRecess MaximumRecess 1/2" (12 mm) 3-5/16" (84 mm) Dia. Face of Fitting to Face of Ceiling 1-1/2" (38 mm) atMax. Recess 1" (25 mm) atMin. Recess 2-1/2" (64 mm) Dia.Hole in Ceiling F1_REC_PEND_CCP ReducingFitting Note: Model CCP concealed assemblies may not be used where the pressure in the space above the ceiling is positive with respect to the protected area. Ensure that the openings in theModel CCP cup are unobstructed following installation. Vented Cup Recessed and Concealed Installation: Pendent Sprinklers Figure 5 FP EscutcheonF1 Escutcheon (F2 Similar) CCP Cover Plate Bulletin 074 January 2023 Page 6 of 9 www.reliablesprinkler.com 2-1/4" (57 mm) Dia. Hole 1-15/16" (49 mm) Dia. 2-1/4" (57 mm) Dia. Hole 1-15/16" (49 mm) DIA. 2-7/8" (73 mm) Dia. 2-7/8" (73 mm) Dia. 2-1/8" (54 mm) Minimum Recess 1-5/8" (42 mm) Maximum Recess 2 1/8" (54 mm) Minimum Recess 1-3/8" (35 mm) Maximum Recess 2-5/8" (67 mm) DiaHole. 2-5/16"(58 mm)Dia. 3-1/4" (83 mm) Dia. 1-1/4" (32 mm) +/-1/4" (6 mm) Face of fitting to face of wall 1-3/8" (35 mm) Minimum Recess 7/8" (22 mm) Maximum Recess 3/8" (16 mm) +/-1/4" (6 mm) Face of fitting to face of wall 1/2" (12 mm) +/- 3/8" (10 mm) Face of fitting to face of wall 4" - 12" (102 mm - 305 mm) Deflector to ceiling F1FR_REC_HSW Reducing Fitting Reducing Fitting ReducingFitting 9/16" [14mm] Model F1FR Horizontal Sidewall Sprinkler with Model FP Recessed Escutcheon 1/2" (13mm) Nominal Adjustment Model F1FR Horizontal Sidewall Sprinklerwith Model F2 Recessed Escutcheon1/2" (13mm) Nominal Adjustment Model F1FR Horizontal Sidewall Sprinklerwith Model F1 Recessed Escutcheon 3/4" (19mm) Nominal Adjustment F2 Recessed escutcheon 1/2" (13 mm) Adjustment F1 Recessed escutcheon 3/4" (19 mm) Adjustment 4" - 12" (102 mm - 305 mm) Deflector to ceiling 9/16" [14mm] 4" - 12" (102 mm - 305 mm) Deflector to ceiling 9/16" [14mm] Note: Model FP recessed assemblies may not be used where thepressure in the space behind the sprinkler is positive with respect to the space in the protected area. Ensure that the openings in the Model FP cup are unobstructed following installation. Vented Cup Recessed Installation: Horizontal Sidewall Sprinklers Figure 6 Bulletin 074 January 2023 Page 7 of 9 www.reliablesprinkler.com Installation Model F1FR Series sprinklers must be installed in accordance with NFPA13 and the requirements of all applicable authorities having jurisdiction. Model F1FR Series sprinklers must be installed with the Reliable sprinkler installation wrench identified in this Bulletin. Any other wrench may damage the sprinkler. The Models W2 and W4 wrenches have two sets of jaws. Use the smallest set of jaws that fit on the wrench flats of the sprinkler. A leak tight sprinkler joint can be obtained with a torque of 8 to 18 lb-ft (11 to 24 N.m). Do not tighten sprinklers over the maximum recommended installation torque. Exceeding the maximum recommended installation torque may cause leakage or impairment of the sprinkler. Glass bulb sprinklers have orange bulb protectors or protective caps to minimize bulb damage during shipping, handling and installation. Reliable sprinkler installation wrenches are designed to install sprinklers with bulb protectors in place. Remove the bulb protector at the time when the sprinkler system is placed in service for fire protection. Removal of the bulb protector before this time may leave the bulb vulnerable to damage. Remove bulb protectors by undoing the clasp by hand. Do not use tools to remove bulb protectors. Standard Finishes Special Application Finishes Sprinkler F1, F2 and FP(2) Escutcheons CCP Cover Plate(2)Sprinkler F1, F2 and FP(2) Escutcheons CCP Cover Plate(2) Bronze Brass Chrome Electroless Nickel PTFE(3)(4)Bright Brass Bright Brass Chrome Chrome White Paint Bright Brass(5)Satin Chrome Satin Chrome White Polyester(3)White Polyester Satin Chrome Custom Color Polyester Custom Color Paint Custom Color Polyester(3) Notes: 1. Paint or any other coating applied over the factory finish will void all approvals and warranties. 2. Model FP escutcheons and Model CCP sprinklers utilize a galvanized steel cup with a finished trim ring or cover plate. 3. cULus Listed as corrosion resistant. 4. FM Approved as corrosion resistant. 5. For 200°F (93°C) maximum temperature rated sprinklers only. Finishes(1)Table B Maintenance Reliable Model F1FR series sprinklers should be inspected and the sprinkler system maintained in accordance with NFPA 25, as well as the requirements of any Authorities Having Jurisdiction. Prior to installation, sprinklers should remain in the original cartons and packaging until used. This will minimize the potential for damage to sprinklers that could cause improper operation or non-operation. Do not clean sprinklers with soap and water, ammonia liquid or any other cleaning fluids. Remove dust by gentle vacuuming without touching the sprinkler. Replace any sprinkler which has been painted (other than factory applied). A stock of spare sprinklers should be maintained to allow quick replacement of damaged or operated sprinklers. Failure to properly maintain sprinklers may result in inadvertent operation or non-operation during a fire event. Wrenches Model W2 (upright, pendent) Model J (New frame with guard installed) Model JD (Legacy frame with guard installed, similar but with zinc finish)Model W4 (recessed, concealed pendent) Bulletin 074 January 2023 Page 8 of 9 www.reliablesprinkler.com P/N 9999970623Bulletin 074 January 2023 Page 9 of 9 www.reliablesprinkler.com Guarantee For the guarantee, terms, and conditions, visit www. reliablesprinkler.com. Ordering Information Specify the following when ordering: Model • F1FR56 Deflector/Orientation • Upright • Intermediate Upright • Pendent • CCP Concealed Pendent • Horizontal Sidewall • Vertical Sidewall Temperature Rating • See sprinkler technical specifications Sprinkler Finish • See Table B Recessed Escutcheon(1)(2) • F1 • F2 • FP Escutcheon Finish • See Table B CCP Cover Plate Temperature Rating • 135°F (57°C) [For use with 135°F (57°C) and 155°F (68°C) sprinklers.] • 165°F (74°C) [For use with 175°F (79°C) and 200°F (93°C) sprinklers.] CCP Cover Plate Finish • See Table B Sprinkler Wrench • Model W2 • Model W4 (recessed, concealed) • Model J (New frame with guard installed) • Model JD (Legacy frame with guard installed) Notes: 1. 286°F (141°C) sprinklers are not listed to be used recessed or concealed. 2. For FM, recessed sprinklers must use the Model F2 escutcheon. www.reliablesprinkler.com Product Description Model J112 and JL112 series sprinklers are cULus Listed extended coverage spray sprinklers intended for installation in accordance with NFPA 13. The sprinklers also have cULus Listed Specific Application Criteria for installation under concrete tee construction in accordance with the requirements documented in this bulletin. Coverage areas up to 400 ft2 (37 m2) per sprinkler with a maximum spacing of up to 20 ft by 20 ft (6.1 m by 6.1 m) are permitted for both Light Hazard and Ordinary Hazard occupancies. Listed flows and pressures for each hazard classification and sprinkler spacing are provided in this bulletin. Model J112 and JL112 series sprinkler are cULus Listed as quick-response sprinklers for Light Hazard occupancies. When used in the Ordinary Hazard occupancies, Model J112 and JL112 series sprinklers are cULus Listed as quick-response for spacings up to 14 ft by 14 ft (4.3 m by 4.3 m) and standard-response for other listed spacings up to 20 ft by 20 ft (6.1 m by 6.1 m). Model J112 Pendent and J112 Upright sprinklers use a glass bulb operating element and are cULus Listed as Corrosion Resistant Sprinklers when ordered with White Polyester, Black Polyester, or Electroless Nickel PTFE (ENT) finish. Model JL112 Pendent and JL112 Upright sprinklers use a fusible link operating element. Model J112 Pendent and Model JL112 Pendent sprinklers are cULus Listed for use with the Model F2 and Model FP recessed escutcheons, which provide up to ½ inch (13 mm) of adjustment. In addition, for Ordinary Hazard occupancies, the Model J112 Pendent and Model JL112 Pendent sprinklers are cULus Listed for use with the Model F1 recessed escutcheon that provides up to ¾ inch (19 mm) of adjustment. Application Model J112 and JL112 series sprinklers are intended for installation in Light Hazard and Ordinary Hazard occupancies in accordance with NFPA 13. The sprinklers must be installed in accordance with the requirements of NFPA 13 for extended coverage spray sprinklers and the requirements identified in this bulletin. In addition to the installation requirements of NFPA 13, cULus Listed Specific Application Criteria for installation under concrete tee construction is provided in this bulletin. cULus Listed K11.2 (160 metric) Model J112 and JL112 Sprinklers Extended Coverage Sprinklers for Light Hazard and Ordinary Hazard Bulletin 172 September 2022 Model J112 UprightModel JL112 Upright Model J112 PendentModel JL112 Pendent Model J112 and JL112 Series Sprinkler Summary Model Orientation Operating Element Sprinkler Identification Number (SIN) J112 Pendent Glass Bulb RA7216 JL112 Pendent Fusible Link R7216 J112 Upright Glass Bulb RA7326 JL112 Upright Fusible Link R7326 Table A FP Recessed EscutcheonF1/F2 Recessed Escutcheon Bulletin 172 September 2022 Page 2 of 7 www.reliablesprinkler.com Model J112 Pendent Sprinkler SIN RA7216 Technical Specifications Style: Extended Coverage Pendent Threads: 3/4” NPT or ISO 7-1R3/4 Nominal K-Factor: 11.2 (160 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Glass Bulb Cup: Bronze Alloy Frame: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Kick Spring: Steel Alloy Deflector: Brass Alloy Sprinkler Wrench Model J1 Model RJ (recessed) Finishes (See Table G) Sensitivity (See Table B) Temperature Ratings 155°F (68°C) 200°F (93°C) 286°F (141°C) Recessed Escutcheons F1-3/4” (19mm) adjustment (Ordinary Hazard only) F2-1/2” (13mm) adjustment FP-1/2” (13mm) adjustment Listings and Approvals cULus Listed cULus Listed as Corrosion Resistant with White Polyester, Black Polyester, and ENT finish only Max. Spacing ft. x ft. (m x m) Light Hazard Ordinary Hazard Group 1 Ordinary Hazard Group 2 Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) 12 x 12 (3.7 x 3.7) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 14 x 14 (4.3 x 4.3) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 16 x 16 (4.9 x 4.9) 30 (114) QR 7.2 (0.50) QR 39 (148) SR 12.1 (0.8) SR 51 (193) SR 20.7 (1.4) SR 18 x 18 (5.5 x 5.5) 33 (125) QR 8.7 (0.60) QR 49 (186) SR 19.1 (1.3) SR 65 (246) SR 33.7 (2.3) SR 20 x 20 (6.1 x 6.1) 40 (152) QR 12.8 (0.88) QR 60 (227) SR 28.7 (2.0) SR 80 (303) SR 51.0 (3.5) SR Table B QR = Quick-response SR = Standard-response Listed Design Criteria and Sensitivity Model J112 Pendent Sprinkler Components Figure 1 Bulletin 172 September 2022 Page 3 of 7 www.reliablesprinkler.com Model JL112 Pendent Sprinkler SIN R7216 Technical Specifications Style: Extended Coverage Pendent Threads: 3/4” NPT or ISO 7-1R3/4 Nominal K-Factor: 11.2 (160 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Frame: Brass Alloy Levers: Brass Alloy Cap: Bronze Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Brass Alloy Strut: Copper Alloy Sprinkler Wrench Model J1 Model RJ (recessed) Finishes (See Table G) Sensitivity (See Table C) Temperature Rating* 165°F (74°C) 212°F (100°C) Recessed Escutcheons F1-3/4” (19mm) adjustment (Ordinary Hazard only) F2-1/2” (13mm) adjustment FP-1/2” (13mm) adjustment Listings and Approvals cULus Listed *Chrome and white polyester finish is supplied with white link regardless of temperature rating Max. Spacing ft. x ft. (m x m) Light Hazard Ordinary Hazard Group 1 Ordinary Hazard Group 2 Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) 12 x 12 (3.7 x 3.7) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 14 x 14 (4.3 x 4.3) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 16 x 16 (4.9 x 4.9) 30 (114) QR 7.2 (0.50) QR 39 (148) SR 12.1 (0.8) SR 51 (193) SR 20.7 (1.4) SR 18 x 18 (5.5 x 5.5) 33 (125) QR 8.7 (0.60) QR 49 (186) SR 19.1 (1.3) SR 65 (246) SR 33.7 (2.3) SR 20 x 20 (6.1 x 6.1) 40 (152) QR 12.8 (0.88) QR 60 (227) SR 28.7 (2.0) SR 80 (303) SR 51.0 (3.5) SR Table C QR = Quick-response SR = Standard-response Listed Design Criteria and Sensitivity Model J112 Pendent Sprinkler Components Figure 2 Bulletin 172 September 2022 Page 4 of 7 www.reliablesprinkler.com Model J112 Upright Sprinkler SIN RA7326 Technical Specifications Style: Extended Coverage Upright Threads: 3/4” NPT or ISO 7-1 R3/4 Nominal K-Factor: 11.2 (160 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Glass Bulb Cup: Bronze Alloy Frame: Brass Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Kick Spring: Steel Alloy Deflector: Brass Alloy Finishes (See Table G) Sensitivity (See Table D) Temperature Rating 155°F (68°C) 200°F (93°C) 286°F (141°C) Sprinkler Wrench Model J1 Listings and Approvals cULus Listed cULus Listed as Corrosion Resistant with White Polyester, Black Polyester, and ENT finish only Max. Spacing ft. x ft. (m x m) Light Hazard Ordinary Hazard Group 1 Ordinary Hazard Group 2 Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) 12 x 12 (3.7 x 3.7) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 14 x 14 (4.3 x 4.3) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 16 x 16 (4.9 x 4.9) 30 (114) QR 7.2 (0.50) QR 39 (148) SR 12.1 (0.8) SR 51 (193) SR 20.7 (1.4) SR 18 x 18 (5.5 x 5.5) 33 (125) QR 8.7 (0.60) QR 49 (186) SR 19.1 (1.3) SR 65 (246) SR 33.7 (2.3) SR 20 x 20 (6.1 x 6.1) 40 (152) QR 12.8 (0.88) QR 60 (227) SR 28.7 (2.0) SR 80 (303) SR 51.0 (3.5) SR Table D QR = Quick-response SR = Standard-response Listed Design Criteria and Sensitivity Model J112 Upright Sprinkler Components Figure 3 Bulletin 172 September 2022 Page 5 of 7 www.reliablesprinkler.com Model JL112 Upright Sprinkler SIN R7326 Technical Specifications Style: Extended Coverage Upright Threads: 3/4” NPT or ISO 7-1 R3/4 Nominal K-Factor: 11.2 (160 metric) Max. Working Pressure: 175 psi (12 bar) Min. Spacing: 8 ft. (2.4 m) Material Specifications Thermal Sensor: Nickel Alloy Solder Link Frame: Brass Alloy Levers: Brass Alloy Strut: Brass Alloy Cap: Bronze Alloy Sealing Assembly: Nickel Alloy with PTFE Load Screw: Bronze Alloy Deflector: Brass Alloy Finishes (See Table G) Sensitivity (See Table E) Temperature Rating* 165°F (74°C) 212°F (100°C) Sprinkler Wrench Model J1 Listings and Approvals cULus Listed *Chrome and white polyester finish is supplied with white link regardless of temperature rating Max. Spacing ft. x ft. (m x m) Light Hazard Ordinary Hazard Group 1 Ordinary Hazard Group 2 Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) Flow gpm (l/m) Pressure psi (bar) 12 x 12 (3.7 x 3.7) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 14 x 14 (4.3 x 4.3) 30 (114) QR 7.2 (0.50) QR 30 (114) QR 7.2 (0.50) QR 39 (148) QR 12.1 (0.8) QR 16 x 16 (4.9 x 4.9) 30 (114) QR 7.2 (0.50) QR 39 (148) SR 12.1 (0.8) SR 51 (193) SR 20.7 (1.4) SR 18 x 18 (5.5 x 5.5) 33 (125) QR 8.7 (0.60) QR 49 (186) SR 19.1 (1.3) SR 65 (246) SR 33.7 (2.3) SR 20 x 20 (6.1 x 6.1) 40 (152) QR 12.8 (0.88) QR 60 (227) SR 28.7 (2.0) SR 80 (303) SR 51.0 (3.5) SR Table E QR = Quick-response SR = Standard-response Listed Design Criteria and Sensitivity Model JL112 Upright Sprinkler Components Figure 4 Note: The Model FP, F1, or F2 may be used for ordinary hazard occupancies. For light hazard occupancies, the Model FP or F2 re- cessed escutcheon must be used. Model J112 and JL112 sprinklers with Model F1 recessed escutcheon are not listed for use in light hazard occupancies. Bulletin 172 September 2022 Page 6 of 7 www.reliablesprinkler.com The Model J112 and JL112 pendent and upright sprinklers are cULus Listed for installation under concrete tee construction in accordance with the following specific application criteria: • Max. Tee Depth: 2’- 6” (0.8m) • Max. Tee Stem Spacing: 7’- 6” (2.3m) • Min. Tee Stem Spacing: 3’- 0” (0.9m) • Max. Tee Length: 32’- 0” (9.8m) or non-conbustible baffles not less than the depth of the tees must be installed so that the longitudinal space between baffles does not exceed 32ft (9.8m) in length. • Max. Deflector distance below Tee: 1” (25mm) • Comply with obstructions to the Sprinkler Discharge Pattern Development requirements of the NFPA13 where deflector is located above bottom of tee. Model J112 and JL112 Specific Application Criteria for Use Under Concrete Tee Construction cULus Listed Figure 7 Model F1/F2 Escutcheon Installation DimensionsFigure 6 Model FP Escutcheon Installation Dimensions Figure 5Application and Installation for Use Under Concrete Tee 1” (25mm) max. 1” (25mm) max. 2’-6” (0.8m) max. 7’-6” (2.3m) max. 3’-0” (0.9m) min. P/N 9999970310Bulletin 172 September 2022 Page 7 of 7 www.reliablesprinkler.com Installation Glass bulb sprinklers have orange bulb protectors to minimize bulb damage during shipping, handling, and installation. Reliable sprin- kler installation wrenches are designed to install sprinklers with bulb protectors in place. Remove the bulb protector at the time when the sprinkler system is placed in service for fire protection. Removal of the bulb protector before this time may leave the bulb vulnerable to damage. Remove bulb protectors by undoing the clasp by hand. Do not use tools to remove bulb protectors. Models J112 and JL112 series sprinklers must be installed with the Reliable sprinkler installation wrench identified in this bulletin. Any other wrench may damage the sprinkler. Recommended installa- tion torque is 14 to 20 lb.ft (19 to 27 N.m). Do not tighten sprinklers over the maximum recommended installation torque. Exceeding the maximum recommended installation torque may cause leak- age or impairment of the sprinkler. Recessed pendent sprinklers are to be installed as shown in Fig. 6 or Fig 7., as applicable to the specific model being installed. Mod- els J112 and JL112 series recessed pendent sprinklers may only be installed with the Reliable Model F1, Model F2, or Model FP recessed escutcheon. The use of any other recessed escutcheon will void all approvals and negate all warranties. The Reliable Model FP escutcheon may not be used in ceilings having positive pres- sure with respect to the space below. Ensure that the openings in the Model FP escutcheon/can assembly are unobstructed follow- ing installation. Maintenance Models J112 and JL112 series sprinklers should be inspected and the sprinkler system maintained in accordance with NFPA 25. Do not clean sprinklers with soap and water, ammonia or any other cleaning fluids. Remove dust by gentle vacuuming. Replace any sprinkler which has been painted (other than factory applied) or damaged in any way. A stock of spare sprinklers should be main- tained to allow quick replacement of damaged or operated sprin- klers. Prior to installation, sprinklers should be maintained in the original cartons and packaging until used to minimize the potential for damage to sprinklers that would cause improper operation or non-operation. J1 Wrench RJ Wrench Table G Sprinkler Finishes Special Application Sprinkler Finishes Sprinkler F1, F2, & FP(3) Escutcheons Sprinkler F1, F2, & FP(3) Escutcheons Bronze Chrome Plated White Polyester (2) Brass Chrome Plated White Polyester Bright Brass Dull Chrome Black Polyester (2) Custom Color Polyester Electroless Nickel PTFE (2) (4) Bright Brass Dull Chrome Black Polyester Custom Color Polyester Type 316 Stainless Steel Sprinkler & Escutcheon Finishes (1) Notes: (1) Paint or any other coating applied over the factory finish will void all approvals and warranties. (2) cULus Listed Corrosion Resistant when ordered with Model J112 Pendent (RA7216) or Model J112 Upright (RA7326). (3) The Model FP escutcheon assembly consists of an unfinished galvanized cup with a finished escutcheon ring. (4) Available with Model J112 Pendent (RA7216) and Model J112 Upright (RA7326) only. Listings and Approvals Listed by Underwriters Laboratories, Inc. and certified by Underwriters Laboratories of Canada (cULus) UL Listing Category Sprinklers, Automatic and Open Extended Coverage Sprinklers UL Guide Number – VNIV. Ordering Information Specify: 1. Sprinkler Model: [J112 Pendent] [JL112 Pendent] [J112 Upright] [JL112 Upright] 2. Temperature Rating: J112: [155°F (68°C)] [200°F (93°C)] [286°F (141°C)] JL112: [165°F (74°C)] [212°F (100°C)] 3. Finish: (See Table G) 4. Escutcheon (Pendent Only; for 3/4” threads) Model F1 (Ordinary Hazard Only) Model F2 Model FP