HomeMy WebLinkAboutMFP24004741.pdfDEPARTMENT OF COMMUNITY
AND ECONOMIC DEVELOPMENT
Minor Franchise Permit: MFP24004741
IVR Number: 24004741
Permit Information
Permit Name: Puget Sound Energy Gas Permits
Address/Location:09/17/2024Application Date:6843000090Parcel Number: 1716 EDMONDS WAY SE
Permit Type:10/02/2024Issue Date:Franchise
Permit Work Class:10/02/2025Expiration Date:Minor Utility
Job Number: 109153637Franchise Type:Natural Gas
Description: PSE Gas CREW TO REPLACE EXISTING GAS SERVICE AT MAIN. NO HS CUTS.
Contacts
Name Address PhoneTypeBilling
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031ApplicantX
INFRASOURCE SVCS B: (206) 949-5846Contractor
Business License Number: 36742Construction Contractor: INFRASL871C2
Puget Sound Energy Inc 10885 NE 4th Street, PSE08-N08
Bellevue, WA 98009
B: (888) 225-5773Emergency
Contact
CITY OF RENTON ROW 1055 S Grady Way
Renton, WA 98057-3232
Owner
Corrie Rydberg
Puget Sound Energy
3702 71st Ave W
University Place, WA 98466
C: (253) 905-5031Specialized
Billing
General Conditions & Signature
Permission is hereby given for the work described on this permit according to the conditions hereon and according to the
approved plans and specifications pertaining thereto, subject to compliance with the Ordinance of the City of Renton.
Ÿ
This permit and plans must be posted at the job site at all times.Ÿ
I hereby certify that no work is to be done except as described above and in approved plans, and that work is to conform to
Renton Trench Restoration and Street Overlay Requirements.
Ÿ
Call 425.430.7203 or go to: https://permitting.rentonwa.gov one working day in advance to schedule an inspections and for ANY
work in the Right of Way.
Ÿ
Call 8 1 1 to locate underground utilities at least two full business days prior to any excavation.Ÿ
In accordance with RCW 19.122.033(4) the permit holder is required to contact (Williams Northwest Pipeline at 425.868.1010)
(Olympic Pipeline at 425.235.7736) (Puget Sound Energy at 425.375.3397) to request a consultation with the transmission
pipeline company prior to performing any construction or excavation activities. This requirement to consult with the
transmission pipeline company is in addition to the requirement to Call before You Dig as required in RCW 19.122.
Ÿ
(Date)(Signature)
Page 1 of 1THIS PERMIT AND PLANS MUST BE POSTED AT THE JOB SITE AT ALL TIMES
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
DEPARTMENT OF PUBLIC WORKS
Page 1 of 3 | Published: 10/27/2021
Transportation Division | 1055 South Grady Way, 5th Floor | Renton, WA 98057 | 425-430-7380
Website: rentonwa.gov
TRAFFIC CONTROL PLAN APPLICATION
Published: 10/27/2021
TRAFFIC CONTROL PLAN (TCP) MUST BE SUBMITTED TO PUBLIC WORKS TRANSPORTATION DIVISION
FOR REVIEW/APPROVAL AT LEAST FIVE (5) WORKING DAYS BEFORE THE DATE OF WORK.
The City of Renton requires any contractor, firm, corporation, or other public/private agency to prepare a traffic control
plan (TCP) and obtain city's approval of that plan when construction, repair, or maintenance work is to be conducted
within the city's right-of-way.
1. Fill out the Traffic Control Plan (TCP) Application form and prepare required submittal documents.
2. The following items are all required for submittal of the TCP Application:
☐Electronic Copy of the TCP Application
☐Electronic Copy of the TCP Layout, on 11” X 17” paper size format, which shall:
Include map(s) showing the location of the project and work area.
Be legible lettering and clear, contrasting, symbols of viewing or printing.
Must indicate street names, and north arrow and scale.
Types of plans required:
o Work hour plan – show all mobility impacts during construction hours.
o Non-work plan - show all mobility impacts after work hours when limited or no work is
happening in the right-of-way (ROW), if applicable.
o Changing construction phases – show construction sequence and each construction phase
change even if the traffic control is not modified, if applicable.
o Pedestrian access/detour plan, if applicable.
- Shall conform to the Washington State Traffic Control Flagger Certification handbook, by the
Evergreen Safety Council.
3. Submit Application via email to TCP@rentonwa.gov with the subject line “TCP Application – [Project Name].”
Project Name: Permit #:
Site Address:
Work Date: From _____________ To _____________ Work Time: Start ______________ End ______________
Construction Company:
Contact Name: Phone/Cell: _________________________
Business Address: City/State: Zip:
Description of Work:
Approval By: _________________________________________________ Date:____________________
Transportation Engineering
INFRASOURCE, INC
6905 S 228TH ST KENT, WA 98032
PLEASE SEE ATTACHED
109153637
1716 EDMONDS WAY SE
Gayle Plaisance 425 417 0140
MFP24004741
Monday Friday 8:00am 3:00pm
Scott Warlick CED 10/2/2024
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 2 of 3 | Published: 10/27/2021
PERMIT HOLDER AGREES TO ALL THE FOLLOWING:
Must have approved Traffic Control Plan (TCP) prior to commencing the work.
Maintain existing pedestrian access. The work on pedestrian facilities, shall be limited to one corner at a time,
with the least possible inconvenience or delay to pedestrians.
WORK TIME begins when any street or travel lane is fully or partially closed. This includes set up within the
traveled way.
Comply with all traffic regulations of the City of Renton and the State of Washington.
Prepare a traffic control plan and obtain City approval of that plan. That plan shall be implemented for all street
and lane closures, and the plan shall be performed in compliance with the Manual on Uniform Traffic Control
Devices.
Notify emergency services (253-852-2121) twenty-four (24) hours before any street or lane closures.
Contractor or entity must call Renton School District (425-204-4455) or any public/private agency, including public
transit, to be affected by a temporary lane or road closure a minimum of five business days (excluding weekends
and holidays) prior to starting any work.
Contractor or entity must notify King County Metro in writing at construction.coord@kingcounty.gov a minimum
of five business days (excluding weekends and holidays) prior to starting any work impacting bus stops, a
temporary lane or road closure. Work requiring removing a bus shelter or sign requires notification in writing a
minimum of 30 business days (excluding weekends and holidays). Please call King County Metro at 206-477-1140
with any questions.
Any lane or street closures not in conformance with the approved traffic control plan and/or without notification
of emergency services may result in receiving a citation for violation of R.C.W. 47.36.200 Signs or Flaggers at
thoroughfare work sites and R.C.W. 9A.36.050 Reckless Endangerment, and other applicable State and City codes.
Indemnify and hold harmless the City of Renton from any and all claims, actions, and judgments, including all
costs of defense and attorney’s fees incurred in defending against same, arising from and related to
implementation of the approved traffic control plans including claims arising from towing of private vehicles and
the acts of the Permit Holder’s agents and employees.
The City of Renton shall be entitled, in its reasonable discretion, to settle claims prior to suit or judgment, and in
such event shall indemnify and hold harmless the City for any such claims paid, including the City’s reasonable
attorney’s fees and litigation costs incurred resulting from such claim.
In the event any claim or suit is brought against City within the scope of this Agreement, Permit Holder will pay for
legal counsel chosen by the City to defend against same.
Flagger and sign placement are subject to revision by the City Inspector on site, if needed to address traffic or
pedestrian safety or travel.
All permit conditions shall be met.
NOTES:
Total road closure lasting more than twenty-four (24) hours is subject to the approval by the City Council.
Work Zone Traffic Control shall be in accordance with the Manual on Uniform Traffic Control Devices (MUTCD)
and shown by a traffic control plan layout or reference to WSDOT.
Approved Temporary Traffic Control Plan must be at the work site during work hours.
Complete assistance and accommodation shall be provided to all kinds of pedestrian traffic when sidewalk or
walkway is impeded to safely redirect pedestrians around a work zone.
Signage shall be used to warn motorcyclists/bicyclists of the potential hazards on any uneven surfaced or slippery
road conditions during work and non-work hours.
Any vehicle, equipment, barricade, or portable tow-away sign used within the work area must display a company
logo or any legally acceptable sign showing the company name, address, and telephone number at a conspicuous
place on the vehicle or equipment.
Note: The Applicant is responsible for compliance with all codes and regulations, whether or not described in this document.
Page 3 of 3 | Published: 10/27/2021
In the case of Temporary No Parking Zones, all the following apply in addition to previous:
Contractor must complete form to show limits of Temporary No Parking Zone identifying barricade locations for
vacate parking or curb lane usage.
Contractor must post notice of dates and time of Temporary No Parking Zone with at least two signs per block
seventy-two (72) hours in advance of effective date and time.
The cover sheet of this Traffic Control Plan form must be attached to each Temporary No Parking Sign on the
project site.
Temporary traffic control devices must be removed immediately when work is done or no construction activities
are going on. If deemed abandoned, City crews will remove and store them at the City’s maintenance shop (3555
NE 2nd Street).
I certify that the information on this application and within the submittal documents are accurate to the best of my
knowledge and I acknowledge all the requirements on this application.
Applicant’s Signature Date
Applicant’s Name (Print)
CORRIE RYDBERG
SE ED
M
O
N
D
S
C
T
E
D
M
O
N
D
S
W
A
Y
S
E
E
D
M
O
N
D
S
W
A
Y
S
E
SE 16
T
H
S
T
1
4
14
1414141414141716
1708
STOP
STOP
W2
0
-
1
ROA
D
WORKAHEADW2
0
-
4
ONE LANEROAD
AHEAD
X'
≥
X'
≥
X'
≥W2
0
-
7
A
W20-7AW20-1ROADWORKAHEADW20-4ONE LANEROADAHEADX'
≥
X'
≥
X'
≥W20-7ARESIDENT(S) WILL BE INFORMED OF
TEMPORARY DRIVEWAY CLOSURE
FROMTOTOW AWAY AREAPHONE 684-5444NAME OF FIRM XXX-XXX-XXXXNO PARKINGPLACE SIGNS BOTH
SIDES OF WORK AREA
N
SIGN SPACING
MPH
60/65
45/55
35/40
30
25
"X"
1000'
500'
350'
200'
100'
CHANNELIZATION
DEVICE SPACING
MPH
55/70
35/45
25/30
TAPER
40
30
20
TANGENT
80
60
40
Project Address:
Page
PSE PUGETSOUNDENERGY
Designer:
Job #
REV
Jason Bisenius
425-424-7316
jason.bisenius@pse.com
1 OF 11716 EDMONDS WAY SE, RENTON, WA 98058
0
11972336
08/22/2024
Notes:
1. All signs and spacing to conform to the
MUTCD and City of Renton standards.
2. All sidewalks, driveways, exits and egresses
shall be completely clear unless otherwise indicated,
if indicated use ADA compliant channelization.
3. Channelizing devices are 28" traffic cones.
Use traffic drums (barrels) with steady burning
Type C lights on all State State Routes and Hwys.
4. Sign size can be a minimum of 36" x 36" and
shall not obstruct pedestrian access.
5. Crew is required to leave a minimum of 10' for
traveling lane width.
6. Alert affected residents and businesses.
7. Work to take place during approved work hours as
per jurisdictional requirements. (Generally between 9
a.m. and 4 p.m. on non-arterials and from 9 a.m. to 3
p.m. on arterials. If night time work is approved,
signaling and flaggers shall conform to WAC
296-155-305. Night time work to take place between
_____________and ______________.)
8. All Flagger and Downstream tapers shall be 50'-100'.
9. Work area will be 207' NCL of SE Edmonds CT & 20' ECL
of Edmonds Way SE.
MINIMUM TAPER LENGTH=L (FT.)
LANE
WIDTH
10
11
12
20
70
75
80
25
105
115
125
30
150
165
180
35
205
225
245
40
270
295
320
45
475
495
540
POSTED SPEED (MPH)
50
500
550
600
55
550
605
660
60
-
660
720
65
-
-
780
70
-
-
840
LEGEND
28" TRAFFIC CONE
SIGN LOCATION
TRAFFIC FLOW
WORK VEHICLE/
FLASHING LIGHTS
RIGHT OF WAY
WORK AREA
CHEVRONARROW BOARD
FLAGGER
UNIFORMED
POLICE OFFICERPOLICE
STOP
WORK PIT
TEMPORARY TRAFFIC CONTROL PLAN
Puget Sound Energy
Traffic Control Supervisor:
Jason Bisenius
Card No. ES2 000394Card Exp. 01/31/2028Jason.Bisenius@pse.com(425)424-7316
MFP24004741
Service Address:
City Zip:
Customer:Phone:
Customer Email:
Est. Start Date:
Site Contact Email:
&
&
No
Job Description
New Construction:
Construction Method
Building Foundation Type
Septic System
1‐2 Days
No
Basement
Trench
Renton
YESROW Permit:
Jurisdiction:
Replace existing 3/4" STW Residential Extension Svc to 1716 with 1‐1/8" PE Extension &
Replace existing 3/4" STW Twin Svc to 1708 with a new 1‐1/8" PE Twin Svc @ 207' N c/l of
SE 156 St & 20' E c/l of Edmonds Way SE / Contact: Peter Bondarev @ 253‐886‐4522 &
Phillip Larosee @ 425‐445‐6384 before we start the job / 1716 Will require 25‐30' of 1" Fuel
Line / Per Ivonvich change out meter to 1716 with a new 250 Meter
Est. Duration:
250 1/2" x 5/8" PE Weld Tee
PLAT Map:
N
EFV:775 Police #:NO TCP:YES Tie‐In Fitting
Meter:Speed Limit:20 No Parks #:YES
Job Type
Diameter:Flaggers #:2 Arterial:
Del Press:6" W.C.Traffic Signal:N/A Bus Stop:No
Bollards: 2.5" #2 4" #ADA Ramps #:N/A Route #'s:N/A
Meter Loc:Trolley Lines:No Mtr Hoods #:0OL
No Altered Residential Service
Service Information Street Information
1‐1/8" PE
Work Location
207'North
Surface Type
GRS
Size of Cut
of CL SE 157 St 20'East of CL Edmonds Way SE 3 X 5 X 3
PM / Inspector:
Gayle Plaisance
98058
Phone:425‐417‐0150
Puget Sound Energy Gas Pre‐Inspect Form
6/26/24Date:
109153637Job #:
Renton
1716 Edmonds Way SE
PSE 888‐225‐5773
N/A
Phone:206‐498‐0053Ken Elvsaas
of CL of CL
211.084
Drivaway
Water Main 14' E c/l2" STW IP MAIN @ 18' W c/l P/L P/L
C/L
ROW 50 FT
Edmonds Way SE1716SE 157 St
500 Work Area
G
R
A
S
S
A
R
E
A 1708G
R
A
S
S
A
R
E
ASewer Main 12' E c/lMFP24004741
RESTORATION PER CITY OF RENTON STANDARDS
16081808181626002509161616241701170017091708171717161724173218002604172516331551215518156021732172416491716163917081633170016111609160716061640163216241616EDM ONDS W AY SEBEACON W AY BEACON W AY SEERNDALE AVE SEE EDMONDS CT2" STW IP 18'N 3927-19622" STW IP 18'S3927-1962243842" STW IP 21'W68E264
2" STW IP 18'W
3927-19622" STW IP 18'3927-1962" STW IP 1'E R/W
9358-1966488'S71'E317'S382'S362'N550'S591'S608'S65'N54'N76'S963446'S382'S689'S53'S56'E334'N207'N193'N165'W
365'N420'N457'N482'N442'N464'S390'S365'N494'N179'N1 1/8" MPE-72020-E5/8" MPE20125/8" PE19905/8" PE19775/8" PE19935/8"390'S3/4" STW5/8" PE19935/8" PE19935/8" PE19775/8" MPE19951/2" STW-U19691/2"446'S5/8" PE19773/4" STW19623/4" STW19633/4" STW19633/4" STW19633/4" STW19633/4" STW19633/4" STW19623/4" STW19633/4" STW19623/4" STW19633/4" STW19633/4" STW19623/4" STW19625/8" PE19775/8" PE19903/4" STW19623/4" STW19623/4" STW19623/4" STW19623/4" STW19623/4" STW19623/4" STW-U19633/4" STW-U19635/8" 19773'dRPTD OF R/W 10-9-440'STLTNR19'WB142'EON CLB No electric grid information availableS208080, Q211084The information on the attached maps is subject to change without notice. Puget Sound Energy makes no warranty, expressed or implied, concerningthe suitability of this information for any purpose. Recipient agrees to not disclose this confidential information to any other person or entity,unless authorized in writing by Puget Sound Energy. This map is not to be used for determining the actual location of any PSE facilities (call 811).“03-12-2024Scale 1:900Lat\Long=47.4648, -122.1841SE 16TH STSE 157TH STMFP24004741