HomeMy WebLinkAbout577--l* HYDRANTS
7-14.3(01) SETTING HyrVVWTS (ADDITIONAL SECTION)
HYDRANTS SHALL BE INSTALLED IN ACCORDANCE WITH AWWA SPECIFICATIONS C600-77, SECTIONS 3.7 AN1D 3.8.1
AND THE WATER STANDARD DETAILS. HYDRANT AND GLORD POSTS SHALL BE PAINTED IN ACM14W� WITH THE
WATER STANDARD DETAIL. UPON COMPLETION OF THE PROJECT, ALL FIRE HYDRANTS SHALL BE PAINTED TO THE
CITY OF RENTON SPECIFICATIONS AND GLW;tD POSTS PAINTED Y&_LOW. FIRE HYDRANTS SHALL BE OF SUCH,
LENGTH AS To BE SUITABLE FOR INSTALLATION WITH CONNECTIONS TO 6-, 8- and 10- PIPING IN TRENCHES .3
1/2 FEET DEEP UNLESS OTHERWISE SPECIFIED. THE HYDRANT SHALL BE DESIGNED FOR A 4-1/2 FDOT BURlAL
WHERE 12' AND LARGER PIPE IS SHOWN L"ESS OTHERWISE NOTED ON THE PLAN'
7-14.3(02) HYDRANT CONNECTIONS (ADDITIONAL SECTION)
FIRE HYDRANT ASSEMBLY SHALL INCLUDE C.I. TEE (Ki X FL), 6" GATE ALVE (FL X MJ), 6- C.I. SPOOL (PE
X pE) 5- m.V.0. FIRE HYDRANT (MJ CONNECTION), 8- x 24" CAST IRON VALVE BOX, AND 3/4 INCH SHACKLE
ROr) WITH ACCESSORIES AND TWO CONCRETE GUARD POSTS. PAINT SHAACKLE RODS AS SPECIFIED IN SECTION
74.2.13.
7-14.3(03) RESETTING EXISTING HYDRJkNrS (PARTIAL REPLACEMENT SECTION)
REPLACE PARAGRAPH 2 WITH:
THE METHOD OF HARNESSING THE HYDRANT SHALL BE DETERMINED BY THE CONDITIONS FOUND IN THE FIELD
AND SHALL BE RESHACKLED Ap6D REBLOCKED AS DIRECTED BY THE ENGINEER.
7-14.5(01) HYDRANT ASSEMBLY (SUPPLEMENTAL SECTION)
THE LIMIT CONTRACT PRICE PER EACH FOR -HYDRANT ASSEMBLY COMPLETE' SHALL BE THE SAME AS -HYDRANT
ASSEMBLY- EXCEPT THAT THE 6-INCH DUCTILE IRON PIPE CONNECTING THE HYDRANT TO THE MAIN 94ALL BE
INCLUDED IN THE L141T CONTRACT PRICE FOR -HYDRANT ASSEMBLY COMPLETE'-
7-" SEFtVICE CONNECTIONS
7-15.3 CCNSTRUrTION DETALLS (REPLACEMENT SECTION)
REPLACE lst SENTENCE PARAGRAPH 5 WITH:
PIPE MATERIALS [ISE TD EXTEND OR REPLACE EXISTING WATER SERVICE LINES SHALL BE COPPER,
GALVANIZED OR DUCTILE IRON PIPE.
SERVICE LINE CONNECTION TO THE NEW MAIN WILL CONFORM TO THE STANDARD PLANS OF THE CITY OF RENTON
BOUND HEREIN AS APPLICABLE. THE ENGINEER WILL INDICATE THE LOCATION FOR THE TAPS ON THE NEW MAIN
FOR EACH SERVICE TO BE CONNECTED.
THE CONTRACTOR WILL DIRECT TAP MAIN FOR 3/4' SERVICE. THE CONTRACTOR WILL USE COPPER TUBING, TYPE
K, SOFT FOR 314- SERVICES.
PART UNION
TYPE 1: CONNECTIONS rG EXISTING COPPER SERVICES WILL BE MADE WITH FLARE TYPE, THREE
COUPLINGS.
TYPE 11: WHERE EXISTING GALVANIZED SERVICES EXIST, THEY SHALL BE REPLACED WITH A NEW
COPPER PIPE SERVICE TO THE PROPERTY LINE. (METERS SHALL BE LOCATED IN PLANTER
STRIP BETWEEN SIDEWALK AND CURB).
TYPE III: WHERE FUTURE STUB SERVICES SHALL BE INSTALLED THEY SHALL BE INSTALLED AS ABOVE,
TO THE PROPERTY LINE WITH A METER BOX (LESS 3/4 METER). A SOLID CORE THREADED
SPACER THE LENGTH OF A METER SHALL BE INSTALLED IN PLACE OF THE METER.
Supplemental SpecificatiOr's
(Rev 05/01/86) Page 35