HomeMy WebLinkAbout708-22.1 CONTlMlUED
STOP BAR - DELETE A04D REPLACE WITH:
A SOLID WHITE LINE, IN WIDTHS OF 12, 18 AND 24 INCHlES. THE WIDTH SHALL BE INDICATED ON THE
CONTRACT PLANS.
TRAFFIC ARROW - DELETE AND REPLAr�E WITH:
A SOLID WHITE MiARKING (r##ORMING TO CONTRACT PLANS AAD DETAIL SHEETS.
TRAFFIC LETTERS - F43-LACE WITH TRAFFIC LEGEND DELETE AND REPLACE WITH:
A WHITE MARKING USING ALPKABETICAL LETTERS' SEE CONTRACT PLANS AND DETAIL SHEET.
CYCLE DETEC"TlOR SYMBOL - DELETE
B-22.3(5) TOLERANCES FOP, L-NE STRIPES (RE�PLACEHENT SECTION)
ALLOWABLE TOLERANCES FOR STRIPES ARE AS FOLLOWS:
LFW,TH (IF STRIPE - THE LDNlGITU()INA- ACCUMULATIVE ERROR WITHIN A 25 FOOT LEWTH OF SKIP STRIPE
SHALL NUT EXCEED PLUS OR mINUS ONE INCH. WIDTH OF STRIPE - THE WIDTH OF STRIPE SHALL NM VARY
MORE 7,40N PLUS OR MINUS 1/4 INCH.
8-22.3(6) PRINT/PLASTIC STRIPE Ll E; REMOVAL (NEW SECTIOW
WHERE SHO0%l ON THE PLANS OR DIRECTED BY THE ENGINEER, THE CONTRACTOR SHALL REMOVE ALL CILD
CONFLICTING STRIPES OR LINES.
8-22.4 04T (RF-PLLCEMENT SECT -TON)
MEASUFCMENT SPA" BE En' THE LINEAR FDOT FOR 4 INCH WIDE SOLID STRIPE, WITH NO DEDUCTION MADE FOR
THE SKIP BETWEEN THE STRIPES MEASURED. 6 INCH WIDE SOLID STRIPE, 12 IP40A WIDE CROSSWALK, BARRIER
STRIPE, STOP BAR, TRAFFIC ARROWS AND TRAFFIC LEGEND -ONLY- PER EACH. W-A.5a�NT FOR ALL ITEMS
SAALL BE COMPLETE IN PLACE.
MEASUREMENT FOR PAINT/PLASTIC STRIPE LINE REMOVED, WILL BE BY THE LINEAR FOOT OF WIDE LINE
8-22.5 PAYMENT (REPLACEMENT SECTION)
PAYMENT �� BE MADE UNDER:
1. -PAINTED 8- WIDE SOLID STRIPE.- PER LINEAR FOOT
2. -PArMTFD 6" WIDE SOLID STRIPE" PER LINEAR FOOT
3. "PAINTED _- WIDE BARRIER STRI-E" PER LINEAR FOOT
4. -PAIMTED 12" WIDE CROSSWALK" PER LINEAR FOOT
5. -POUNTED _" WIDE STOP BAR' PER LINEAR FOOT
6. 'PAINTED TRAFFIC ARROW" PER EACH
7. -PALINTED TRAFFIC LEGEND --, PER EACH
8. 'PLASTIC 12" WIDE CROSSWALK" PER LINEAR FOOT
9. -Pj_ASTIC _" WIDE STOP BAR' PER LINEAR FOOT
10. '"LASTIC TRAFFIC ARROW' PER EACH
11. -PL ASTI C TRAFFIC LEGEND - PER EACH
12. -F4340VAL OF PAINT LINE _- WIDE' PER LIN. FT.
13. -ROWDVAL OF PLASTIC -INE WIDE" PER LIN. FT.
Suppl��tal Specifications
(R— 05/01/86) Page 48
IN