Loading...
HomeMy WebLinkAboutP_Traffic_Control_Plans_N.196316_170710TRAFFIC CONTROL PLAN JOB # N.196316.C.12 PERMIT # Date:06/26/2017 Author:Kathy Hubbard, Traffic Control Supervisor Project:N.196316.C.12 CERT:TCS # 008909 Designed for CenturyLink:By Kathy Hubbard (DO NOT ALTER) Comments: General Requirements 1. All signs and spacing to conform to the MUTCD and CITY OF RENTON requirements. 2. Channelizing devices are 28" traffic cones with retro reflective material. 3. All signs are 48" x 48" B/O unless otherwise specified. 4. Alert affected local residents and businesses. 5. Crew is required to leave a minimum of 11' for lane width. 6. Work hours will be ____am to ____pm. Comments: MERGING TAPER LENGTH TAPER ("L") LANE WIDTH L MPH 10' 11' 12' SHIFTING 20 70 75 80 TAPER 25 105 115 165 1/2 L 30 150 165 180 35 205 225 245 SHOULDER 40 270 295 320 TAPER 45 450 495 540 1/3 L Comments: CHANNELIZATION SPACING MPH TAPER TANGENT 35 / 45 30' 60' 25 / 30 20' 40' ONE LANE TWO WAY TAPER 50' TO 100' max Comments: SIGN SPACING MPH "X" 45+ 500' 35 350' 30 200' 25 100' 150' Seattle 200' Sea Tac UNLAWFUL FOR ANYONE OTHER THAN THE CITY OF RENTON TO ALTER THIS CERTIFIED TRAFFIC CONTROL PLAN IN ANY FORM WITHOUT EXPRESS WRITTEN CONSENT FROM: KATHY HUBBARD, TCS# 008909, tcpnd@comcast.net Designed For: CENTURYLINK Project # N. 196316.C.12 Kathy Hubbard Traffic Control Supervisor TCS # 008909 Approved 6/26/2017 Phone 253-737-5198 tcpnd@comcast.net _______________________ 160TH AVE SE 160TH AVE SE SE 144TH STSE 144TH ST160TH AVE SE @ SE 144TH ST REMOVE POLE 317507/168031 W20-7aBE PREPAREDTO STOPW20-7bROAD WORK AHEAD W20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-125+0024+0023+0021+0020+00 Comments: THIS IS TO REMOVE POLE 317507/168031. THIS WILL BE ONE LANE TWO WAY TRAFFIC OPERATION WITH FLAGGERS. FLAGGERS WILL ASSIST ANY PEDESTRIANS AT WORK AREA. DRIVEWAYS REMAIN ACCESSIBLE. P.317507 168031 W20-7aBE PREPAREDTO STOPW20-7bWORK AREA 8' X 60' Legend FLAGGERS Work Area CONES www.invarion.com Date:06/26/2017 Author:Kathy Hubbard, Traffic Control Supervisor Project:N.196316.C.12 CERT:TCS # 008909 Designed for CenturyLink:By Kathy Hubbard (DO NOT ALTER) Comments: General Requirements 1. All signs and spacing to conform to the MUTCD and CITY OF RENTON requirements. 2. Channelizing devices are 28" traffic cones with retro reflective material. 3. All signs are 48" x 48" B/O unless otherwise specified. 4. Alert affected local residents and businesses. 5. Crew is required to leave a minimum of 11' for lane width. 6. Work hours will be ____am to ____pm. Comments: MERGING TAPER LENGTH TAPER ("L") LANE WIDTH L MPH 10' 11' 12' SHIFTING 20 70 75 80 TAPER 25 105 115 165 1/2 L 30 150 165 180 35 205 225 245 SHOULDER 40 270 295 320 TAPER 45 450 495 540 1/3 L Comments: CHANNELIZATION SPACING MPH TAPER TANGENT 35 / 45 30' 60' 25 / 30 20' 40' ONE LANE TWO WAY TAPER 50' TO 100' max P.317552 168061 EXISTING 30' COMM POLE P.317547 168035 P.317553 168035 P.317562 168037 160TH AVE SE160TH AVE SE SE 144TH STSE 144TH STW20-7aW20-7aW20-7aW20-7aBE PREPAREDTO STOPW20-7bBE PREPAREDTO STOPW20-7bBE PREPARED TO STOP W20-7b BE PREPAREDTO STOPW20-7bROAD WORK AHEAD W20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1AERIAL CABLE REMOVAL / PLACEMENT WORK AREA 8' X 500' MOVING OPERATION 13+00 12+00 20+00 TRAFFIC CONTROL PLAN JOB # N.196316.C.12 PERMIT # Comments: SIGN SPACING MPH "X" 45+ 500' 35 350' 30 200' 25 100' 150' Seattle 200' Sea Tac Designed For: CENTURYLINK Project # N. 196316.C.12 Kathy Hubbard Traffic Control Supervisor TCS # 008909 Approved 6/26/2017 Phone 253-737-5198 tcpnd@comcast.net _______________________ 160TH AVE SE @ SE 144TH ST AERIAL REMOVAL / PLACEMENT Comments: THIS IS TO REMOVE OLD AND PLACE NEW AERIAL CABLE ON EXISTING POLES. THIS WILL BE ONE LANE TWO WAY MOVING TRAFFIC OPERATION WITH FLAGGERS. FLAGGERS WILL HOLD TRAFFIC FOR ROADWAY CROSSING. FLAGGERS WILL MOVE WITH THE WORK CREW. FLAGGERS WILL ASSIST ANY PEDESTRIANS AT WORK AREA. FLAGGERS WILL ASSIST AT DRIVEWAYS. UNLAWFUL FOR ANYONE OTHER THAN THE CITY OF RENTON TO ALTER THIS CERTIFIED TRAFFIC CONTROL PLAN IN ANY FORM WITHOUT EXPRESS WRITTEN CONSENT FROM: KATHY HUBBARD, TCS# 008909, tcpnd@comcast.net Legend FLAGGERS Work Area www.invarion.com TRAFFIC CONTROL PLAN JOB # N.196316.C.12 PERMIT # Date:06/26/2017 Author:Kathy Hubbard, Traffic Control Supervisor Project:N.196316.C.12 CERT:TCS # 008909 Designed for CenturyLink:By Kathy Hubbard (DO NOT ALTER) Comments: General Requirements 1. All signs and spacing to conform to the MUTCD and CITY OF RENTON requirements. 2. Channelizing devices are 28" traffic cones with retro reflective material. 3. All signs are 48" x 48" B/O unless otherwise specified. 4. Alert affected local residents and businesses. 5. Crew is required to leave a minimum of 11' for lane width. 6. Work hours will be ____am to ____pm. Comments: MERGING TAPER LENGTH TAPER ("L") LANE WIDTH L MPH 10' 11' 12' SHIFTING 20 70 75 80 TAPER 25 105 115 165 1/2 L 30 150 165 180 35 205 225 245 SHOULDER 40 270 295 320 TAPER 45 450 495 540 1/3 L Comments: CHANNELIZATION SPACING MPH TAPER TANGENT 35 / 45 30' 60' 25 / 30 20' 40' ONE LANE TWO WAY TAPER 50' TO 100' max Comments: SIGN SPACING MPH "X" 45+ 500' 35 350' 30 200' 25 100' 150' Seattle 200' Sea Tac UNLAWFUL FOR ANYONE OTHER THAN THE CITY OF RENTON TO ALTER THIS CERTIFIED TRAFFIC CONTROL PLAN IN ANY FORM WITHOUT EXPRESS WRITTEN CONSENT FROM: KATHY HUBBARD, TCS# 008909, tcpnd@comcast.net Designed For: CENTURYLINK Project # N. 196316.C.12 Kathy Hubbard Traffic Control Supervisor TCS # 008909 Approved 6/26/2017 Phone 253-737-5198 tcpnd@comcast.net _______________________ P.317553 168032 160TH AVE SE 160TH AVE SE SE 144TH STSE 144TH ST160TH AVE SE @ SE 144TH ST REMOVE POLE 317553/168032 W20-7aBE PREPAREDTO STOPW20-7bROAD WORK AHEAD W20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-125+0024+0023+0021+0020+00 Comments: THIS IS TO REMOVE POLE 317553/168032. THE ROADWAY IS WIDE ENOUGH TO MAINTAIN TWO WAY TRAFFIC. SPOTTER WILL ASSIST ANY PEDESTRIANS AT WORK AREA. WORK AREA 10' X 60' Legend FLAGGERS CONES Work Area www.invarion.com TRAFFIC CONTROL PLAN JOB # N.196316.C.12 PERMIT # Date:06/26/2017 Author:Kathy Hubbard, Traffic Control Supervisor Project:N.196316.C.12 CERT:TCS # 008909 Designed for CenturyLink:By Kathy Hubbard (DO NOT ALTER) Comments: General Requirements 1. All signs and spacing to conform to the MUTCD and CITY OF RENTON requirements. 2. Channelizing devices are 28" traffic cones with retro reflective material. 3. All signs are 48" x 48" B/O unless otherwise specified. 4. Alert affected local residents and businesses. 5. Crew is required to leave a minimum of 11' for lane width. 6. Work hours will be ____am to ____pm. Comments: MERGING TAPER LENGTH TAPER ("L") LANE WIDTH L MPH 10' 11' 12' SHIFTING 20 70 75 80 TAPER 25 105 115 165 1/2 L 30 150 165 180 35 205 225 245 SHOULDER 40 270 295 320 TAPER 45 450 495 540 1/3 L Comments: CHANNELIZATION SPACING MPH TAPER TANGENT 35 / 45 30' 60' 25 / 30 20' 40' ONE LANE TWO WAY TAPER 50' TO 100' max Comments: SIGN SPACING MPH "X" 45+ 500' 35 350' 30 200' 25 100' 150' Seattle 200' Sea Tac UNLAWFUL FOR ANYONE OTHER THAN THE CITY OF RENTON TO ALTER THIS CERTIFIED TRAFFIC CONTROL PLAN IN ANY FORM WITHOUT EXPRESS WRITTEN CONSENT FROM: KATHY HUBBARD, TCS# 008909, tcpnd@comcast.net Designed For: CENTURYLINK Project # N. 196316.C.12 Kathy Hubbard Traffic Control Supervisor TCS # 008909 Approved 6/26/2017 Phone 253-737-5198 tcpnd@comcast.net _______________________ P.31508 168034P.317528 168035P.317547 168035 P.317553 168035 P.317562 168037 160TH AVE SE 160TH AVE SE SE 144TH STSE 144TH ST160TH AVE SE @ SE 144TH ST AERIAL PLACEMENT W20-7aW20-7aW20-7aW20-7aBE PREPAREDTO STOPW20-7bBE PREPAREDTO STOPW20-7bBE PREPARED TO STOP W20-7b BE PREPAREDTO STOPW20-7bROAD WORK AHEAD W20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1AERIAL CABLE INSTALL WORK AREA 8' X 600' MOVING OPERATION 25+0024+0023+0021+0020+00 Comments: THIS IS TO PLACE AERIAL CABLE ON EXISTING POLES. THIS WILL BE ONE LANE TWO WAY MOVING TRAFFIC OPERATION WITH FLAGGERS. FLAGGERS WILL HOLD TRAFFIC FOR ROADWAY CROSSING. FLAGGERS WILL ASSIST ANY PEDESTRIANS AT WORK AREA. FLAGGERS WILL ASSIST AT DRIVEWAYS. Legend Work Area FLAGGERS www.invarion.com TRAFFIC CONTROL PLAN JOB # N.196316.C.12 PERMIT # Date:06/26/2017 Author:Kathy Hubbard, Traffic Control Supervisor Project:N.196316.C.12 CERT:TCS # 008909 Designed for CenturyLink:By Kathy Hubbard (DO NOT ALTER) Comments: General Requirements 1. All signs and spacing to conform to the MUTCD and CITY OF RENTON requirements. 2. Channelizing devices are 28" traffic cones with retro reflective material. 3. All signs are 48" x 48" B/O unless otherwise specified. 4. Alert affected local residents and businesses. 5. Crew is required to leave a minimum of 11' for lane width. 6. Work hours will be ____am to ____pm. Comments: MERGING TAPER LENGTH TAPER ("L") LANE WIDTH L MPH 10' 11' 12' SHIFTING 20 70 75 80 TAPER 25 105 115 165 1/2 L 30 150 165 180 35 205 225 245 SHOULDER 40 270 295 320 TAPER 45 450 495 540 1/3 L Comments: CHANNELIZATION SPACING MPH TAPER TANGENT 35 / 45 30' 60' 25 / 30 20' 40' ONE LANE TWO WAY TAPER 50' TO 100' max Comments: SIGN SPACING MPH "X" 45+ 500' 35 350' 30 200' 25 100' 150' Seattle 200' Sea Tac UNLAWFUL FOR ANYONE OTHER THAN THE CITY OF RENTON TO ALTER THIS CERTIFIED TRAFFIC CONTROL PLAN IN ANY FORM WITHOUT EXPRESS WRITTEN CONSENT FROM: KATHY HUBBARD, TCS# 008909, tcpnd@comcast.net Designed For: CENTURYLINK Project # N. 196316.C.12 Kathy Hubbard Traffic Control Supervisor TCS # 008909 Approved 6/26/2017 Phone 253-737-5198 tcpnd@comcast.net _______________________ 160TH AVE SE 160TH AVE SE SE 144TH STSE 144TH ST160TH AVE SE @ SE 144TH ST REMOVE POLE 317529/168031 W20-7aBE PREPAREDTO STOPW20-7bROAD WORK AHEAD W20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-1ROADWORKAHEADW20-125+0024+0023+0021+0020+00 Comments: THIS IS TO REMOVE POLE 317529/168031. THIS WILL BE ONE LANE TWO WAY TRAFFIC OPERATION WITH FLAGGERS. FLAGGERS WILL ASSIST ANY PEDESTRIANS AT WORK AREA. DRIVEWAYS REMAIN ACCESSIBLE. P.317529 168031 W20-7aBE PREPAREDTO STOPW20-7bBE PREPARED TO STOP W20-7bBE PREPAREDTO STOPW20-7bWORK AREA 8' X 60' Legend FLAGGERS Work Area CONES www.invarion.com