HomeMy WebLinkAboutJ 119DocuSign Envelope ID: 5D308A1A-204D-48E8-BB23-8A2834BB565E
FUSE KITS QUICK
REFER TO WSDOT LOCKING DISCONNECT 10 AMP IN LINE
LID STANDARD DUTY FUSE KITS S.E.C. OR EQUAL -
JUNCTION BOX TYPES 1 &
2 STANDARD PLAN J-40.10
GROUND LUG
SPLICE KITS CLEAR EPDXY SPLICE
KITS ON ALL THRU WIRE RUNS
CONCRETE PAD OR
SIDEWALK PER STD PLAN 120
24"(MIN) COVER #8 BARE COPPER
GROUND WIRE
1 -#8 EQUIPMENT GROUND
WIREW/GREEN INSULATION
FROM SERVICE CABINET
2 - LIGHTING SYSTEM
WIRES TO CONTACTOR
(SIZED AS REQ'D.)
NOTES:
GROUND
CLAMP
PVC CONDUI
5/8"x8' COPPER CLAD
GROUND ROD
TO LUMINAIRE
#8 GREEN INSULATED WIRE
TO FIXTURE GROUND LUG
CONCRETE FOUNDATION
1. THIS DETAIL DEPICTS THE BASIC LUMINAIRE ELECTRICAL WIRING SYSTEM. ADDITIONAL ELECTRICAL EQUIPMENT MAY
VARY.
2. MINIMUM GROUND WIRE SIZE SHALL BE #8, AS SHOWN ABOVE. IF CURRENT CARRYING CONDUCTORS ARE LARGER
THAN #8, THE MINIMUM GROUND WIRE SIZE SHALL MATCH THE LARGEST WIRE SIZE OF THE CURRENT CARRYING
CONDUCTORS.
3. EQUIPMENT GROUND WIRE & BARE WIRE SHALL BE SECURELY FASTENED TO THE GROUND LUG INSIDE THE POLE
HANDHOLE. ALL BONDING & GROUNDING CONNECTIONS SHALL REMAIN ACCESSIBLE FOR INSPECTION AND
MAINTENANCE.
4. IF THE FIXTURE MANUFACTURER HAS MADE PROVISIONS FOR THE ATTACHMENT OF A GROUND WIRE, A GREEN
INSULATED WIRE OF THE SAME SIZE SHALL RUN FROM THE FIXTURE TO THE GROUND LUG INSIDE THE POLE
HANDHOLE. IF THE FIXTURE MANUFACTURER HAS A GROUND LUG A #8 GREEN INSULATED WIRE SHALL BE RUN
FROM THE FIXTURE GROUND LUG TO THE POLE GROUND LUG.
G�•tY O� LUMINAIRE ELECTRICAL STD. PLAN - 119
�� PUBLIC WORKS WIRING SYSTEM A PROVED:
�F DEPARTMENT GAZ 3/13/2019
DATE