Loading...
HomeMy WebLinkAboutMAP_TAL-BRT_Poles1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Slope City of Renton >15% & <=25% >25% & <=40% (Sensitive) >40% & <=90% (Protected) >90% (Protected) Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands Streets X X Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com Pole to be replaced Grid # 318027-166391 1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Slope City of Renton >15% & <=25% >25% & <=40% (Sensitive) >40% & <=90% (Protected) >90% (Protected) Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands RoadCenterline_2k X X Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com Pole to be replaced Grid # 318027-166391 1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands 2' Primary 2' Intermediate 2019.sid Red: Band_1 Green: Band_2 Blue: Band_3 X X Pole to be replaced Grid # 318027-166391 Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com 1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Slope City of Renton >15% & <=25% >25% & <=40% (Sensitive) >40% & <=90% (Protected) >90% (Protected) Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands 2019.sid X X Pole to be replaced Grid # 317719-166129 Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com 1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Slope City of Renton >15% & <=25% >25% & <=40% (Sensitive) >40% & <=90% (Protected) >90% (Protected) Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands RoadCenterline_2k X Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com X Pole to be replaced Grid # 317719-166129 1,128 94 TAL-BRT Pole Replacement This map is a user generated static output from an Internet mapping site and is for reference only. Data layers that appear on this map may or may not be accurate, current, or otherwise reliable. None 11/9/2020 Legend 64032 THIS MAP IS NOT TO BE USED FOR NAVIGATION Feet Notes 64 WGS_1984_Web_Mercator_Auxiliary_Sphere Information Technology - GIS RentonMapSupport@Rentonwa.gov City and County Labels City and County Boundary Addresses Parcels Environment Designations Natural Shoreline High Intensity Shoreline Isolated High Intensity Shoreline Residential Urban Conservancy Jurisdictions Streams (Classified) <all other values> Type S Shoreline Type F Fish Type Np Non-Fish Type Ns Non-Fish Seasonal Unclassified Not Visited Wetlands 2' Primary 2' Intermediate Streets Points of Interest Parks Waterbodies X Parcels: 172305-9102 & Right-of-way Address: 275 BRONSON WAY NE & 47.477418, -122.204065 Project Description: PSE proposes to replace two overhead electric utility poles that are at risk of failing. Replacement poles are of same size as failing poles to be removed and will be installed immediately adjacent to existing pole, then electrical equipment will be transferred from old pole to replacement pole. A typical wood pole replacement requires removing the existing structure and excavating a 2-foot diameter hole at the new pole site to a depth that is approximately equivalent to 10 percent of the total pole height plus two additional feet. Excavations are typically done using an auger mounted to equipment, or by hydrovac excavation via vactor truck, and the excavated spoils are collected and removed from the site. The pole is then placed in the excavated hole and then backfilled with approximately one cubic yard of gravel. Each pole replacement is expected to take approximately 2 days. Brush clearing for equipment access and at location of pole will be required. Contact: Erin Warren - Puget Sound Energy erin.warren@pse.com X Pole to be replaced Grid # 317719-166129