Loading...
HomeMy WebLinkAboutAdden 1SCIP ID: 17731-030-C Site ID: WATKW-030-C FA #14932154 Site License Addendum Company shall apply to the City for approval of this Site License Addendum by filling out the below form and submitting the form to the City for approval with the applicable Administrative Fee. For each Small Cell, the Company shall fill out a Site License Addendum. This Site License Addendum (“Addendum”), made this _____ day of ____________, 2021 (the “Site License Addendum Effective Date”) between the City of Renton, hereinafter designated the “City” and New Cingular Wireless PCS, LLC, with its principal offices at 1025 Lenox Park Boulevard NE, 3 rd Floor, Atlanta, GA 30319, hereinafter designated “Company”: 1. Addendum. This is a Site License Addendum as referenced in that certain Master License Agreement between The City and Company dated December 15, 2020 ("Agreement"). All of the terms and conditions of the Agreement are incorporated hereby by reference and made a part hereof without the necessity of repeating or attaching the Agreement. In the event of a contradiction, modification or inconsistency between the terms of the Agreement and this Addendum, the terms of this Addendum shall govern. Capitalized terms used in this Addendum shall have the same meaning described for them in the Agreement unless otherwise indicated herein. 2. Project Location. Attachment 1 identifies the physical location of the City Poles on which the Site Equipment shall be attached. 3. Project Description. Attachment 2 identifies the Site Equipment to be installed on the City Poles and shall include the construction details (e.g. electrical and fiber connections, antennas, radios and accessory components). If deviating from the standard detail, Company shall provide photo simulations of such Site Equipment attached to the City Poles and a load bearing study. The photo simulations shall include photos indicating the existing City Pole without the Site Equipment and with the proposed Site Equipment attached. If there are any accessory components, for example conduit holding backhaul or electrical, such accessory components shall be depicted in the photo simulations. 4. NIER Report. Company has commissioned an NIER Report for the City Poles. Such report is attached hereto in Attachment 3. 5. Backhaul. Backhaul services shall be provided to the Site Equipment as follows: □ underground fiber □ aboveground fiber □ microwave □ other_________________ and from the following entity: __________TBD__________________. Access to the backhaul system shall be separate from the City’s communication and electrical conveyance system. The Company, or its third party contractor, is responsible for the placement and installation of any junction boxes. □ Yes 6.Electrical Fee. The estimated peak draw power for the Small Cell is _15 kWh__. The Small Cell electrical usage falls within City cost tier as described in the Fee Schedule. 7.Usage of City-Owned Conduit. Company requests usage of City’s streetlight power conduit. □ No (if yes, see Attachment 4) 8.Term. The term of this Addendum shall run concurrently with the Agreement and shall CAG-20-498, Adden #1-21 SCIP ID: 17731-030-C Site ID: WATKW-030-C FA #14932154 Attachment 1 Physical Location of City Poles Engineers & Architects A-1 1A LETTER & SURVEY 1A LETTER N.T.S. SCALE 1N.T.S. SCALE 2 SURVEY 12/21/2020 SCIP ID: 17731-030-C Site ID: WATKW-030-C FA #14932154 Attachment 2 Equipment Installation Plans/ Construction Details Engineers & Architects AT&T SITE ID: SCIP ID #: USID: FA #: POLE TYPE: POLE #: SITE ADDRESS: COUNTY: JURISDICTION: WATKW-030-C 17731-030 207832 14932154 METAL LIGHT POLE 0891C95 719 N 10TH ST RENTON, WA 98057 KING CITY OF RENTON SITE DEPART FROM: SEATTLE-TACOMA INTERNATIONAL AIRPORT, 17801 INTERNATIONAL BLVD, SEATTLE, WA 98158 1.HEAD SOUTHEAST ON AIRPORT EXPRESSWAY TOWARD DEPARTURES DR 2.USE THE LEFT LANE TO KEEP LEFT 3.KEEP LEFT 4.SLIGHT LEFT ONTO AIRPORT EXPRESSWAY 5.KEEP RIGHT AT THE Y JUNCTION, FOLLOW SIGNS FOR WA-518 E /INTERSTATE 5/INTERSTATE 405 AND MERGE WITH WA-518 E 6.KEEP LEFT TO CONTINUE ON I-405 N 7.TAKE EXIT 5 FOR WA-900 E TOWARD SUNSET BLVD NE/ISSAQUAH 8.USE ANY LANE TO TURN LEFT ONTO N SOUTHPORT DR 9.CONTINUE ONTO LOGAN AVE N ARRIVE AT: 719 N 10TH ST, RENTON, WA 98057 R Call before you dig. below.Know what's TO OBTAIN LOCATION OF PARTICIPANTS UNDERGROUND FACILITIES BEFORE YOU DIG IN WASHINGTON, CALL UTILITY NOTIFICATION CENTER TOLL FREE: 1-800-424-5555 OR www.callbeforeyoudig.org WASHINGTON STATUTE REQUIRES MIN OF 2 WORKING DAYS NOTICE BEFORE YOU EXCAVATE SC20005350 T-1 TITLE SHEET 01/11/2021 Engineers & Architects GN-1 GENERAL NOTES 01/11/2021 Engineers & Architects GN-2 GENERAL NOTES 01/11/2021 UG/EUG/EUG/GUG/GUG/GUG/GUG/GU G / G U G / G UG / S L UG / S L UG / S L UG /S L Engineers & Architects OVERALL SITE PLAN OVERALL SITE PLAN 1/32" = 1'-0" (11x17) SCALE: (OR) 1/16" = 1'-0" (22x34)0 4'8'16' 1 NORTH A-2 01/11/2021 UG/GUG/GUG/GUG/GUG/GUG/GUG/GUG/EUG/EUG/EUG/EU G / G U G / G U G / G U G / G UG/EUG/S LUG/ S LUG/ S LUG/ S LUG/ S L Engineers & Architects A-3 ENLARGED SITE PLAN ENLARGED SITE PLAN 1/4" = 1'-0" (24x36) (OR) SCALE: 1/8" = 1'-0" (11x17) 0 1'2'4'1 NORTHNORTH 01/11/2021 Engineers & Architects EXISTING AND PROPOSED SOUTHWEST POLE ELEVATION EXISTING SOUTHWEST POLE ELEVATION 12PROPOSED SOUTHWEST POLE ELEVATION 3/8" = 1'-0" (24x36) (OR) SCALE: 3/16" = 1'-0" (11x17) 0 1'2'3'3/8" = 1'-0" (24x36) (OR) SCALE: 3/16" = 1'-0" (11x17) 0 1'2'3' A-4 · · · · · · 01/11/2021 Engineers & Architects A-5 EXISTING AND PROPOSED NORTHWEST POLE ELEVATION EXISTING NORTHWEST POLE ELEVATION 12PROPOSED NORTHWEST POLE ELEVATION 3/8" = 1'-0" (24x36) (OR) SCALE: 3/16" = 1'-0" (11x17) 0 1'2'3'3/8" = 1'-0" (24x36) (OR) SCALE: 3/16" = 1'-0" (11x17) 0 1'2'3' · · · · · · 01/11/2021 ³ ³ ³³ Engineers & Architects A-6 EQUIPMENT DETAILS N.T.S. SCALE N.T.S. SCALEB25/B66 RRH DETAIL N.T.S. SCALE N.T.S. SCALE B46 RRH DETAIL OMNI ANTENNA DETAILSURGE SUPPRESSOR DETAIL 2 1 4 3 01/11/2021 ³ ³ ³ Engineers & Architects A-7 EQUIPMENT DETAILS N.T.S. SCALE N.T.S. SCALE N.T.S. SCALE COMBINER/DIPLEXER DETAIL 5G ANTENNA DETAIL 2 13 N.T.S. SCALENOT USED 4 EQUIPMENT SCHEDULE 01/11/2021 Engineers & Architects RF-1 PLUMBING DIAGRAM & RF WARNING SIGN N.T.S. SCALE 1RF WARNING SIGN (EQUIPMENT) RF WARNING SIGN (ANTENNA) N.T.S. SCALE 2 N.T.S. SCALE 3 PLUMBING DIAGRAM AT&T operates antenna at this structure. Contact AT&T at 800-638-2822, opt. 9, 3 and follow their instructions prior to performing any maintenance or repairs above this point. Keep 11ft. away from the fronts of the antennas. Follow safety guidelines for working in an RF environment. Above this point you are entering an area where radio frequency (RF) fields may exceed the FCC General Population exposure limits. This is AT&T Site USID _____________ STONEHOUSE RD892 NOTICE 01/11/2021 (1) PROPOSED AT&T 5G ANTENNA W/INTEGRATED RADIO Engineers & Architects S-1 SMALL CELL DECORATIVE POLE DETAILS NOT USED 2N.T.S. SCALE SMALL CELL DECORATIVE POLE DETAILS (PER CITY OF RENTON STD. PLAN - 117.1A)1N.T.S. SCALE 01/11/2021 Engineers & Architects S-2 SMALL CELL DECORATIVE POLE DETAILS SMALL CELL DECORATIVE POLE DETAILS (PER CITY OF RENTON)1N.T.S. SCALE 01/11/2021 Engineers & Architects S-3 FOUNDATION, TRENCH & SIDEWALK DETAILS N.T.S. SCALE 1SIDEWALK CONSTRUCTION DETAILS (PER CITY OF RENTON STD. PLAN - 102)N.T.S. SCALE 3 N.T.S. SCALE 2UTILITY TRENCH DETAILS PIER FOUNDATION DETAIL N.T.S. SCALE 1 01/11/2021 Engineers & Architects S-4 LUMINAIRE, MOUNTING BRACKET & ELECTRICAL WIRING SISTEM DETAILS N.T.S. SCALE 1LUMINAIRE AND MOUNTING BRACKET DETAIL (AS PER CITY OF RENTON STD. PLAN - 117.3)LUMINAIRE ELECTRICAL WIRING SYSTEM DETAIL (PER CITY OF RENTON STD. PLAN - 119)N.T.S. SCALE 2 01/11/2021 Engineers & Architects S-5 LOCKING LID STANDARD DUTY JUNCTION BOX DETAIL N.T.S. SCALE 1LOCKING LID STANDARD DUTY JUNCTION BOX DETAIL (PER WSDT STD. PLAN J-40.10-04) 01/11/2021 Engineers & Architects S-6 LOCKING LID STANDARD DUTY JUNCTION BOX DETAIL N.T.S. SCALE 1LOCKING LID STANDARD DUTY JUNCTION BOX DETAIL (PER WSDT STD. PLAN J-40.10-04) 01/11/2021 Engineers & Architects E-1 ELECTRICAL SCHEMATIC DETAILS N.T.S. SCALEPOWER SCHEMATIC 1ONE LINE DIAGRAMN.T.S. SCALE 2 N.T.S. SCALE 1ONE LINE DIAGRAM 01/11/2021 Engineers & Architects G-1 GROUNDING DETAILS & NOTES N.T.S. SCALE 1HARDWARE DETAIL FOR EXTERIOR CONNECTIONS N.T.S. SCALE 2 GROUNDING DIAGRAM GROUNDING NOTES GROUNDING BAR N.T.S. SCALE 3 N.T.S. SCALE 4 01/11/2021 WA/OR National Power Consumption Calculator Average Power Consumption Design Type PICO MICRO RRH Type AHFB B25 (1C AHIB B66 (2C) AZRB B46 (3C) AEWD 5G (Main Module) AEWE 5G (Extension Module) AHFIB B25/66 (1C/2C) AHLBA B12/14 (3C) AEWD 5G (Main Module) AEWE 5G (Extension Module) Daily kWh 2.6 2.6 1.66 6.6 1.08 29.59 27.22 6.6 1.08 Total kWh per Design 14.54 64.49 Monthly kWh 79.2 79.2 50.4 201.865 32.74 900 828 201.865 32.74 Total kWh per Design 443.405 1962.605 Yearly kWh 950 950 605 2422.38 392.82 10800 9936 2400.38 392.82 Total kWh per Design 5320.2 23529.2 SCIP ID: 17731-030-C Site ID: WATKW-030-C FA #14932154 Attachment 3 NIER Report FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE STUDY ON ELECTROMAGNETIC FIELDS EXPOSURE Prepared for: Mastec on behalf of Site Name: WATKW-030-C Site ID: 17731-030 Pole #0891C95 47.49779° N, 122.20628° W near 719 North 10th Street Renton, Washington, 98057 FCC COMPLIANCE: AT&T is proposing to enhance its wireless communication service by installing a canister-shaped antenna on top of a pole at the location mentioned above. A radio equipment enclosure will be installed on the same pole. The proposed installation will comply with FCC standards and all Applicable Standards for RF Exposure. The conclusion is based on information provided by Mastec/AT&T, on site measurement of existing RF field strength and the RF power density calculations performed in this study. Members of the General Public will not be exposed to hazardous levels of RF energy in the surrounding area of the facility. The operation of the facility will contribute a maximum of 2.3% to existing cumulative Maximum Permissible Exposure (MPE) levels on publicly accessible surfaces at ground level or in adjacent buildings. 17731-030 October 27, 2020 RFSSRP Page | 2 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com QUALIFICATION This report is an engineering statement confirming compliance. I am a Professional Engineer in electrical engineering registered in the State of Washington, Oregon and California. I have been designing electrical systems and writing RF exposure compliance reports for the last 20 years. The information included and calculations performed herein are true and accurate to the best of my knowledge. Sei Yuen Sylvan Wong, PE Washington PE Reg. No. 37962 October 27, 2020 PROTOCOL This study, and the calculations performed herein, is based on OET Bulletin 65 1 which adopts ANSI C95.1- 1992 and NCRP standards. In particular, equation 10 from section 2 of the guideline is used as a model (in conjunction with known antenna radiation patterns) for calculating the power density at different points of interest. This information will be used to judge the RF exposure level incident upon the general population, and any employee present in the area. It should be noted that ground reflection of RF waves has been taken into account. FCC Maximum Permissible Exposure Levels The FCC’s maximum permissible exposure (MPE) is defined as “the rms and peak electric and magnetic field strength, their squares, or the plane-wave equivalent power densities associated with these fields to which a person may be exposed without harmful effect and with an acceptable safety factor level”. The FCC defines two exposure environments based on the awareness of persons who are being exposed. RF safety compliance centers on management of these two environments. 1 Cleveland, Robert F, et al. Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields. OET Bulletin 65, Edition 97-01, August 1997. 17731-030 October 27, 2020 RFSSRP Page | 3 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com General Population/Uncontrolled Exposure The General Population/Uncontrolled exposure applies to human exposure to RF fields when the general public is exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Therefore, members of the general public always fall under this category when exposure is not employment-related. Occupational/Controlled Exposure The Occupational/Controlled exposure applies to human exposure to RF fields when persons are exposed as a consequence of their employment and in which those persons who are exposed have been made fully aware of the potential for exposure and can exercise control over their exposure. These exposure limits also apply where exposure is of a transient nature as a result of incidental passage through a location where exposure levels may be above General Population/Uncontrolled limits as long as the exposed person has been made fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate action. The FCC’s MPE limits for the General Population/Uncontrolled and Occupational/ Controlled environments are given in Table 1 and Table 2, respectively. Figure 1 is a graph of both MPEs as functions of frequency. Table 1: MPE Limits for General Population/Uncontrolled Environment Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Averaging Time for |E|2, |H|2 , or S (Minutes) 0.3 – 1.34 614 1.63 (100)* 30 1.34 -30 824/f 2.19/f (180/f2)* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 -- -- f/1500 30 1500– 100,000 -- -- 1.0 30 f = frequency in MHz * = Plane wave equivalent power density 17731-030 October 27, 2020 RFSSRP Page | 4 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com Table 2: MPE Limits for Occupational/Controlled Environment Frequency Range (MHz) Electric Field Strength (V/m) Magneti c Field Strength (A/m) Power Density (mW/cm2) Averaging Time for |E|2, |H|2 , or S (Minutes) 0.3 – 3.0 614 1.63 (100)* 6 3.0 – 30 1842/f 4.89/f (900/f2)* 6 30 – 300 61.4 0.163 1.0 6 300 – 1500 -- -- f/300 6 1500– 100,000 -- -- 5.0 6 f = frequency in MHz * = Plane wave equivalent power density 17731-030 October 27, 2020 RFSSRP Page | 5 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com In general, as specified in 47 C.F.R. 1.1307(b), as amended, when the FCC's guidelines are exceeded in an accessible area due to the emissions from multiple fixed transmitters the following policy applies. Actions necessary to bring the area into compliance with the guidelines are the shared responsibility of all licensees whose transmitters contribution to the RF environment at the non-complying accessible area exceeds 5% of the exposure limit (that applies to their particular transmitter) in terms of power density or the square of the electric or magnetic field strength. This applies regardless of whether such transmitters would, by themselves, normally be excluded from performing a routine environmental evaluation. Owners of transmitter sites are expected to allow applicants and licensees to take reasonable steps to comply with the FCC's requirements and, where feasible, should encourage collocation of transmitters and common solutions for controlling access to areas where the RF exposure limits might be exceeded. RF Safety Signs AT&T uses two types of RF safety signs: • Alerting signs • Information signs Alerting Signs Three types of alerting signs, NOTICE, CAUTION, and WARNING, associated with increasing exposure risk relative to the applicable MPE limits are used. They announce the existence of potential RF exposure hazards within the areas they demarcate. The formats of these signs follow the recommendations of the ANSI and IEEE standards regarding colors, wording, and symbols. 17731-030 October 27, 2020 RFSSRP Page | 6 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com NOTICE signs alert persons that they are attempting to access an area in which RF exposure levels may exceed the General Population/Uncontrolled MPE. CAUTION signs alert persons that they are attempting to enter an area in which RF exposure may exceed the Occupational/Controlled MPE. WARNING signs alert persons that they are attempting to enter an area in which the RF exposure may exceed the Occupational/Controlled MPE by a factor of 10 or greater The NOTICE sign should be installed on the post 4 feet below the antenna. The CAUTION and WARNING signs are not applicable to this site. Information Signs INFORMATION signs instruct persons on what to do and who to contact if they are in, or desire to enter, an area where AT&T operates antennas. Several types of INFORMATION signs are used by AT&T, each of which is identified by unique number. Information Sign 1 17731-030 October 27, 2020 RFSSRP Page | 7 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com Information Sign 2 Antennas that are stand-alone (e.g., lamp posts, stadiums) in areas where there is little potential for exceeding the General Population/Uncontrolled MPE except, perhaps, very close to the antenna. In this case, the INFORMATION Sign 2 would be mounted close to the antenna in order to alert maintenance workers. (Note: In areas where the potential exists for exceeding the GP MPE limits, additional compliance action, including alerting signs, may be needed.). MITIGATION MEASURES: Due to the mounting height of the proposed AT&T antenna, it would not be accessible to the general public. No mitigation measures are necessary to comply with the FCC public exposure guidelines. 17731-030 October 27, 2020 RFSSRP Page | 8 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com ON SITE MEASUREMENTS The site was visited on October 23, 2020 at 12:18 pm. The weather at the time of the visit was a raining afternoon with a temperature of 59°F. All accessible areas of the site were inspected. Measurement collection was performed using Narda Survey Meter and Broadband Probe (300kHz to 50 GHz) and was consistent with FCC and Narda procedures in making slow sweeping motions over the area that a person could occupy. In using this broadband instrument, the results represent the cumulative contributions of all RF sources at the measurement locations. Narda Radiation meter NBM-550-S / F-0266 (Calibration Date: November 1, 2018) and probe EA-5091 (NBM) (Calibration Date: February 8, 2018) were used to record spatially averaged power density levels as a percentage of the FCC MPE General Population MPE limits. Table 3 below is the collection of measurement readings. Table 3: Measurement Readings are Spatial Average and Maximum as MPE % of the FCC General Population Limits Measurements taken during the site visit attest that the current maximum spatial average power density reading is 0.18% of the MPE limit for general population/uncontrolled exposure in the surrounding area of the proposed facility. There are no locations in the surrounding area near the facility that will have RF exposure levels close to the MPE limit. Table 4: Distance from proposed Pole to adjacent buildings NORTH SOUTHEAST SOUTH SOUTH N/A 23’-3” N/A N/A Location # Site Reading Distance to Pole (ft) Location # Site Reading Distance to Pole (ft) Average % Maximum % Average % Maximum % 1 0.0535 1.205 0’ 8 0.1355 0.3678 203’-7” 2 0.0606 0.2177 92’-9” 9 0.1655 0.4053 101’-4” 3 0.0446 0.1801 177’-10” 10 0.1756 0.1984 81’-3” 4 0.0747 0.2177 158’-1” 11 0.1574 0.2777 239’-2” 5 0.0724 0.1876 305’-5” 12 0.1375 0.2852 332’-1” 6 0.0730 0.2027 247’-5” 13 - - - 7 0.1039 0.2702 173’-2” 14 - - - 17731-030 October 27, 2020 RFSSRP Page | 9 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com The site map below shows the measurement locations 17731-030 October 27, 2020 RFSSRP Page | 10 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com PREDICTIVE ANALYSIS The following parameters have been considered in modeling this configuration: Ant # Antenna Antenna Model Frequency (MHz) Total ERP ANT Centerline AGL (ft) 1 Galtronics OMNI GQ2412-06613 1900 / 2100 / 5250 623 / 623 / 64 42’-4” Radios: Nokia AirScale - AHFB B25, (Max. Tx output: 2 x 20W) - AHIB B66, (Max. Tx output: 2 x 20W) - AZRB B46 (LAA) (Max. Tx output: 1 W) RF FIELD PREDICTION Calculations have been made to predict RF field strength and power density levels around typical RF sources. In order to evaluate the RF exposure level, the power densities at different locations of interest have been examined. Equation 10 from Bulletin 65 is reproduced here as equation 1: S = 33.4 F² ERP R² (1) Where: S = Power density [μW/cm2] ERP = Effective radiated power [W] R = Distance [m] F = Relative field factor (relative numeric gain) For accessible areas at ground level, the maximum predicted power density level resulting from the AT&T operations is 2.3% of the FCC General Population limits. The result represents worst-case predication and are based on antennas operating at the maximum power level. 17731-030 October 27, 2020 RFSSRP Page | 11 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com This map shows exposure level at ground level and adjacent buildings *locations outside of white cloud are 0%-2.3%* 17731-030 October 27, 2020 RFSSRP Page | 12 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com This map shows the exposure level at the center of the antenna at 42’-4” AGL 17731-030 October 27, 2020 RFSSRP Page | 13 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com Predicted MPE (General Public) depicted at the center of the vertical zone that a person could occupy RAD CENTER OF ANTENNA ±42’ AGL NOTICE SIGN INSTALLED 4’ BELOW ANTENNA ON BOTH SIDES OF THE POLE RF Sign can be omitted with an approved Sign Waiver Form from the pole owner. 17731-030 October 27, 2020 RFSSRP Page | 14 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com SITE PICTURES View facing North 17731-030 October 27, 2020 RFSSRP Page | 15 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com View facing West 17731-030 October 27, 2020 RFSSRP Page | 16 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com View facing South 17731-030 October 27, 2020 RFSSRP Page | 17 Core One Consulting US Ltd. Phone: 1 (778) 805-2166 www.coreoneconsulting.com View facing East SCIP ID: 17731-030-C Site ID: WATKW-030-C FA #14932154 Attachment 4 Conduit Lease Addendum