HomeMy WebLinkAbout204.30ISOMETRIC
NOTES:
SECTION B
TOPFOUNDRY NAMEDIFLOW
SECTION A
1.BOLT-DOWN CAPABILITY IS REQUIRED ON ALL FRAMES, GRATES, AND
COVERS, UNLESS OTHERWISE SPECIFIED. PROVIDE TWO HOLES IN
THE FRAME THAT ARE VERTICALLY ALIGNED WITH THE GRATE OR
COVER SLOTS. THE FRAME SHALL ACCEPT THE 5/8"-11 NC x 2" ALLEN
HEAD CAP SCREW BY BEING TAPPED, OR OTHER APPROVED
MECHANISM. LOCATION OF BOLT-DOWN HOLES VARIES BY
MANUFACTURER.
2.REFER TO STANDARD SPECIFICATION 9-05.15(2) FOR ADDITIONAL
REQUIREMENTS.
3.USE ONLY IN SAGS ON VERTICAL CURVES.
4.FOR FRAME DETAILS, SEE STANDARD PLAN 204.00.FLOWFLOWBOLT-DOWN SLOT DETAIL
SEE NOTE 1
1/2"
3/4"
1 1/4"
5/8"
BOLT-DOWN SLOT,
SEE DETAIL AND
NOTE 1
20"
5"
5"
5"
3"
1"
3"
5"
5"
5"
24"
1 5/8" MAX.
4 EQUAL SPACES 4 EQUAL SPACES
A
BOUTFALL TO STREAM DUMP NO POLLUTANTS
3/8" RECESSED LETTERING
RECTANGULAR BI-DIRECTIONAL
VANED GRATE
STD. PLAN - 204.30
PUBLIC WORKS
DEPARTMENT
APPROVED:
DATEGregg Zimmerman
Public Works Administrator
UNLESS OTHERWISE NOTED, DRAWING IS NOT TO SCALE (NTS)
DocuSign Envelope ID: 6EECF5B6-602A-4E4A-B436-A317AA638878
9/28/2018 | 9:45 AM PDT