HomeMy WebLinkAbout214.10ATTACHMENT DETAILS:
1.GATHER FABRIC AT POSTS, IF NEEDED.
2.UTILIZE THREE TIES PER POST, ALL WITHIN TOP 8" OF
FABRIC.
3.POSITION EACH TIE DIAGONALLY, PUNCTURING HOLES
VERTICALLY A MINIMUM OF 1" APART.
4.HANG EACH TIE ON A POST NIPPLE AND TIGHTEN
SECURELY. USE CABLE TIES (50 LBS) OR SOFT WIRE.
TOP OF FABRIC
BELT
DIAGONAL ATTACHMENT
DOUBLES STRENGTH
FLOW
STEEL SUPPORT POSTNOTES:
1.POST SPACING: 7' MAX. ON OPEN RUNS 4' MAX. ON POOLING AREAS.
2.POST DEPTH: AS MUCH BELOW GROUND AS FABRIC ABOVE GROUND.
3.PONDING HEIGHT 24" MAX. ATTACH FABRIC TO UPSTREAM SIDE OF POST.
4.DRIVE OVER EACH SIDE OF SILT FENCE 2 TO 4 TIMES WITH DEVICE EXERTING 60 P.S.I. OR GREATER.
5.NO MORE THAN 24" OF A 36" FABRIC ROLL IS ALLOWED ABOVE GROUND.
6.VIBRATORY PLOW IS NOT ACCEPTABLE BECAUSE OF HORIZONTAL COMPACTION.
100% COMPACTION
EACH SIDE
OPERATION
SILT FENCE
TOP 8"
200-300mm
(8"-12")
ROLL OF SILT FENCE
PLOW
FABRIC ABOVE GROUND
SLICING BLADE (18mm (11/16") WIDTH)
HORIZONTAL CHISEL POINT (76mm (3") WIDTH)
SILT FENCE INSTALLATION BY SLICING
STD. PLAN - 214.10
PUBLIC WORKS
DEPARTMENT
APPROVED:
DATEGregg Zimmerman
Public Works Administrator
UNLESS OTHERWISE NOTED, DRAWING IS NOT TO SCALE (NTS)
DocuSign Envelope ID: 6EECF5B6-602A-4E4A-B436-A317AA638878
9/28/2018 | 9:45 AM PDT