HomeMy WebLinkAbout240.10PLAN
WATER QUALITY
WATER SURFACE
SUBMERGED
INLET PIPE
AFTERBAYFOREBAY
NOTES:
1.THIS DETAIL IS A SCHEMATIC REPRESENTATION ONLY. ACTUAL CONFIGURATION WILL VARY DEPENDING ON SPECIFIC
SITE CONSTRAINTS AND APPLICABLE DESIGN CRITERIA.
2.GRAVITY DRAIN SHALL BE AT LEAST 8 INCH MINIMUM DIAMETER AND SHALL BE CONTROLLED BY A VALVE . USE OF A
SHEAR GATE IS ALLOWED ONLY AT THE INLET OF A PIPE LOCATED WITHIN AN APPROVED STRUCTURE.
3.ACCESS TO EACH COMPARTMENT IS REQUIRED, ON EACH END, AND EVERY 50 FEET MINIMUM.
4.VAULTS PROVIDING MANHOLE ACCESS AT 12 FOOT SPACING NEED NOT PROVIDE CORNER VENTILATION PIPES.
VENTILATION PIPES SHALL BE CAPPED OR OTHERWISE COVERED, BUT DESIGNED SO THAT MAINTENANCE PERSONNEL
CAN REMOVE FOR VENTILATION.
5.WHEN CONNECTING TO A NEW PIPE, USE A FLEXIBLE CONNECTOR (KOR-N-SEAL BOOT WITH CORRUGATED PIPE
ADAPTER OR APPROVED EQUAL). WHEN CONNECTING TO AN EXISTING PIPE, USE A FABRICATED SAND COLLAR OF THE
SAME MATERIAL AS THE CONNECTING PIPE.
6.SEE CONSTRUCTION PLANS FOR SPECIFIC PROJECT REQUIREMENTS.
20' MAX.
(RECOMMENDED)
5' MAX.
HIGH FLOW
BYPASS
LADDER (TYP.)
ACCESS COVER
OVER OUTLET
ACCESS COVER
OVER INLET
12" MIN. VENTILATION PIPES AT CORNERS (TYP.)
COALESCING PLATE RACK
ACCESS DOOR ALLOWING REMOVAL OF
PLATE PACK OR PROVIDE FULL LENGTH
REMOVABLE COVERS ACROSS ENTIRE CELL
SHUT OFF VALVE W / RISER
AND VALVE BOX
SECTION
20' MAX.
7'
MIN.
L/3 MIN.
(L/2 RECOMMENDED)
L
8' MIN.
(L/4 RECOMMENDED)
D
18"
MIN.
12" MIN.
12" MIN.
6" MIN.
12" MIN.
6" MIN.
VARIES (CAN BE CONSTRUCTED
ON GRADE WITHOUT RISERS)
8" TEE
OIL RETAINING
BAFFLE (50% D MIN.)
COALESCING
PLATE RACK
GRAVITY DRAIN
INLET WEIR-SOLIDS
RETAINING BAFFLE
OR WINDOW WALL
INLET PIPE
(8" MIN.)SEE NOTE 5 (TYP.)
2' MIN. COVER
OUTLET PIPE (8" MIN.)
SEE NOTE 5
(TYP.)
SEE NOTE 5 (TYP.)
SEE NOTE 5 (TYP.)
COALESCING PLATE OIL / WATER
SEPARATOR
STD. PLAN - 240.10
PUBLIC WORKS
DEPARTMENT
APPROVED:
DATEGregg Zimmerman
Public Works Administrator
UNLESS OTHERWISE NOTED, DRAWING IS NOT TO SCALE (NTS)
DocuSign Envelope ID: 6EECF5B6-602A-4E4A-B436-A317AA638878
9/28/2018 | 9:45 AM PDT