Loading...
HomeMy WebLinkAboutRS_Apron A and D Lighting Criteria Study_210803_v1.pdf Boeing Apron A and Apron D Lighting Criteria Study July 30, 2021 Prepared for: The Boeing Company Page 2 Flight Line Apron A & D Lighting Study – Boeing Renton Table of Contents General – Project Description and Scope of Work ....................................................................................... 2 Applicable Codes ........................................................................................................................................... 2 Existing Conditions ........................................................................................................................................ 3 User Survey ................................................................................................................................................... 3 Recommendations ........................................................................................................................................ 4 Study Findings and Summary ........................................................................................................................ 4 Appendices .................................................................................................................................................... 6 Appendix A. Existing Light Levels ..................................................................................................... 7 Appendix B. Existing Conditions and Recommended Corrective Actions……………………………………..8 Appendix C. Product Cutsheets ..................................................................................................... 11 General – Project Description and Scope of Work The Sazan Group is performing a lighting study of Boeing Flight Line Aprons A and D in Renton, WA. The study will examine options to remove and replace the existing High-Pressure Sodium flood lights with energy efficient LED light fixtures. In addition, the Boeing study criteria will reuse the existing poles, power, and minimizing the overall number of fixtures, while creating higher light levels. For the study, we performed a site visit and reviewed existing light levels, layout, fixture types, quantity, and had feedback from flight line staff regarding the function of the lighting related to the day to day work they perform. In this report, we have concluded by recommending LED fixtures to fulfill Boeing’s requirements including higher illumination levels with fewer luminaires. We have also performed the necessary photometric calculations ensuring that the new layout will meet the recommended lighting levels, as well as avoiding impact to the shoreline of the Lower Cedar River with light trespass. The report will include two new light fixture selections and a ROM cost summary. Soil and Drainage No new ground disturbance will be involved and no new buildings or facilities are being constructed: Soil conditions and drainage have not been evaluated. The project will occur on paved, impermeable surfaces and will not create additional impermeable surface area. No concrete cutting or paving activities will be performed. No construction activities will occur, and no structures will be placed below the ordinary high water mark of the lower Cedar River. Project activities are located within 200 feet of the shoreline of the Lower Cedar River, which in this river segment is an artificial channel and is constrained between levees and revetments. Page 3 Flight Line Apron A & D Lighting Study – Boeing Renton Applicable Codes Renton City Code refers to King County Title 21A.24.010.G for protecting the public trust as to navigable waters, aquatic resources, and fish and wildlife and their habitat. FAA AC150/5300-13 determines areas of concerns for lighting flight line, cargo, and maintenance Aprons IES RP-37-15 Recommended Practices: Outdoor Lighting for Airport Environments states that a minimum of 2 FC is necessary for Flight Line Apron. Their recommendations is lower than Boeing’s lighting request and requirements. Existing Conditions Existing Stall Light Level: See Appendix A for site visit photometric readings. Generally, stalls have illumination within 10-18 footcandles (FC). There are measurements of less than 10 FC mainly along the inner perimeter of the stalls. Existing Pole Layout: Typical pole layout for stalls in Apron A is (2) 23’ poles at the front and rear of the stall and (2) 15’ poles at the middle of the stall. Each pole is between two stalls and houses fixtures for either stall. The front and middle poles have (2) 400W fixtures and (2) 1000W fixtures per stall, and the rear poles have (2) 400W fixtures and (3) 1000W fixtures. The typical pole layout for Apron D stalls match Apron A, minus the middle poles. Apron D stalls are smaller than A Stalls. Existing Luminaire Layout: Current luminaires for both Apron A & Apron D are 400W and 1000W High Pressure Sodium fixtures. The fixtures are on aimable mounts that allow for adjustments in rotation and tilt. Most fixtures are aimed toward the nearest Airplane stall; however, some have been adjusted to illuminate the site. A single pole at the drive entrance to Apron D is not aimed to illuminate any airline stall but lights the roadway instead. This pole creates the highest level of light trespass to the pedestrian park and the Cedar River. Existing Lighting Controls: Apron D Stall lights are controlled at a single location with a 3 options switch, On, Off, and Auto. The front and rear poles for the typical Apron A stall are controlled at a single location and the middle poles have their individual controls. All poles were set to Auto during the two site visits. Auto turns all luminaires on the pole On at Dusk. User Survey During the nighttime site visit we spoke to Wayne, a Boeing Flight line inspector and crew lead for Stall D6. Wayne noted that the LED upgrade would be beneficial to the work being done, and that higher light levels would be beneficial to their work. For certain inspection areas, there are task or personal lights they use, however, they rely on the pole area lighting for most tasks and for general safety. Wayne mentioned a few specific stalls with lighting issues. Page 4 Flight Line Apron A & D Lighting Study – Boeing Renton First, the poles at stalls D3 and D4 have fixtures that flicker on and off, which can be disruptive to work. Even and consistent illumination is important. Second, Wayne mentioned Stalls 9-10 have uncomfortable glare when inspecting inside the cockpit. Field measurements confirm that the luminaires at these stalls were producing a significantly higher light level, with the brightest point on Stall A-10 at 100 FC. The intensity of the lighting from a couple of these poles versus the generally uniform lighting of the other stalls produce noticeable glare while working at the stall or in the surrounding area. These luminaires were also mounted on smaller 15’ poles unlike the typical 20’+ poles and the luminaires were aimed directly into the pilot’s seat for inspection. Recommendations For effective and efficient lighting of Apron A and D stall lighting there are multiple factors we considered:  For maintaining a low level of light on the Lower Cedar River bank we recommend a LED lamp color temperature of 3000K and a CRI of over 85. The LED lamp allows the lighting quality to be a warmer white and still allow for the necessary light quantity and requested footcandles for the maintenance work to be accomplished.  The replacement fixtures need to have proper optics for aiming and tilting to focus the lighting in the apron area. The selected fixtures allow for accurate adjustment to evenly illuminate the area for the crew’s needs while the cut off guards diminish night light pollution.  It is important to have shielding options to manipulate cut off angles and diminish excess spill light, trespass light, and glare to surrounding areas. Specifically, the cut off shields are needed to accommodate both Boeing and local community concerns of over lighting the shoreline area and disturbing wildlife.  The level of maintenance demands an even illumination on both horizontal and vertical surfaces while minimizing shadows for the work area. The proposed light fixtures fulfill these needs. See Appendix B. comparative calculations for more exact information. Also see the Existing conditions and User survey sections for current conditions.  As with any installation an ease of long term maintenance, warranty and control are essential. Both recommended luminaires have a 5-year warranty and a minimum outdoor rating of IP65.  Footcandle requirement per Boeing is minimum of 10 FC of uniform light, without shadowing, hot spots, or glare.  The suggested replacement light fixtures satisfy the BUG rating, accomplish the concerns above which relate directly to IES RP-37-15 Recommended Practices: Outdoor Lighting for Airport Environments, and both are DLC qualified. Study Findings and Summary We studied two separate LED manufacturers that fulfill all our recommended practices. Our proposed layout reduces the number of LED fixtures per front pole to- 2 lower lumen fixtures per stall or 4- Page 5 Flight Line Apron A & D Lighting Study – Boeing Renton fixtures per pole and for rear plane poles 2- lower lumen fixtures and a single higher lumen fixture. Refer to Appendix B for photometric comparison calculations. The final page of Appendix B shows Apron A Stalls A-9 and A-10 where the light trespass into the Cedar river is of most concern. Using LED fixtures with narrow distribution and sharp cutoff allows the pole lights to be aimable where needed without obtrusive light spillage. Much of the intrusive light to the Cedar River is due to the current fixture’s lack of proper shielding. The two fixtures studied were the Meteor “BTS” Series and the Beacon “MA-F” series. Refer to Appendix C for product cutsheets. Study Findings and Summary continued Our recommendation is to replace the existing High-Pressure Sodium fixtures for the Meteor LED Bolt “BTS” Series floodlight The Meteor Fixture features a die-cast aluminum housing with a tempered glass lens. It has a nominal 9”X15” LED Light producing board and delivers 38,339 lumens using 280 watts, or 137 lumens per watt. The tempered glass lens can come in multiple beam distributions and there are multiple options for 3- sided glare shielding. This fixture is DLC Listed, UL Wet location listed and has an IP68 outdoor rating. The Beacon Matrix fixture is a die-cast aluminum construction with glass enclosed LED optics. It has two LED boards and nominal overall dimensions of 25”X30”. This fixture delivers 32,891 lumens using 330 watts, or 97 lumens per watt. Multiple beam distributions and glare reduction shields are available. This fixture is DLC Listed, UL Wet location listed and has an IP65 outdoor rating. The photometric calculations for this fixture meet the criteria standards but do not perform as effectively as the Meteor fixture. For the front poles at stalls in Apron D, 3 fixtures would be required over the 2 fixtures for the Meteor option. The advantage of replacing the existing high pressure sodium lighting fixtures with new Meteor high performance LED lighting fixtures is improved color rendering, reduced glare, and lighting fixture adjustability. Improved color rendering will enhance worker performance and reduce eye strain and fatigue. The light fixture shielding is expected to reduce light trespass and glare to adjacent properties alleviating possible neighbor complaints. The glare to workers will be diminished by cut off shields on the lighting fixture. The requested illumination levels in the stalls will be maintained while reducing light trespass on the public shoreline to a minimum footcandle level of 0.0 reducing impact on fish and wildlife and enhancing habitat. Energy consumption of the new lighting system is expected to be reduced by over 75%. The improved optics of the new LED lighting fixtures will improve illumination levels and uniformity compared to the existing high pressure sodium lighting system. Appendices Appendix A: Existing Lighting Conditions 8.6 11.6 8.9 10.8 12.4 5.6 2.2 1.4 15.6 7.6 17.2 11.2 8.1 4.3 16.3 15.4 16.110.8 12.014.7 Apron D Stall D6 Light Meter Survey Calculation taken at 9:30pm on 09/06/18 Clear sky Units measured in Footcandles (FC) Appendix B: Proposed Comparative Lighting Calculation Apron D Stalls D6 & D7 Stall D6 fixtures - Meteor “BTS” Series Stall D7 fixtures - Beacon “MA-F” Series Units measured in Footcandles (FC) Appendix B: Proposed Comparative Lighting Calculation Apron A Stalls A-3 & A-4 Stall A-3 fixtures - Meteor “BTS” Series Stall A-4 fixtures - Beacon “MA-F” Series Units measured in Footcandles (FC) Appendix B: Proposed Comparative Lighting Calculation Apron A Stalls A-9 & A-10 Ceder River Light Trespass Stall A-9 fixtures - Meteor “BTS” Series Stall A-10 fixtures - Beacon “MA-F” Series Units measured in Footcandles (FC) Electrical System Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 1 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING - 15746lm (150W) 30182lm (220W) 38339lm (280W) 60509lm (440W) 75168lm (560W) - Power Input: Universal (120-277V); HVT (347-480V) - Operating Temperature: -40°F~104°F - Surge Protection: 10KV LED Technology EPA - 3000K, 4000K, 5000K - 85 CRI, 75 CRI - Beam Angle: 15°, 30°, 60° , 80° and 100° (with diffuser) - Rated Life > 60,000 Hours (L70) Advanced Dimming - Standard 0-10V: <10% METEOR’s proprietary VX Driver combats flickering in recorded materials. Compatible with all dimming options. Project Type Note Quantity - BTS-150 / BTS-220 / BTS-280: 1.28 ft2 - BTS-440 / BTS-560: 2.37 ft2 Warranty Listing - 5 year limited warranty - UL Wet Location Listed, IP65 Outdoor Rating - DLC Listed - FCC - CE Housing - Dimensions: 8.67” (220mm) x 14.96” (380mm) x 5.79” (147mm) - Material: Die-Cast Aluminum, Tempered Glass - Weight: 9.26lbs (BTS-150) / 17.64lbs (BTS-220) / 18.52lbs (BTS-280) / 48.5lbs (BTS-440/560) Mounting - Bracket (stainless steel) IP65 High lumen compact modular luminaire with lumen output 15746 – 75168lm suited for sporting facilities. - Outdoor/Natatorium Rating Special coating, sealant, and wiring is applied for long term operation in harsh environments. (Proprietary VX Driver is incorporated to all dimming options for video flicker-free lighting) DesignLights Consortium™ Qualied Luminaires: BTS-150-CC7-UNV, BTS-220-CC7-UNV, BTS-280-CC7-UNV, BTS-560-50K Standard version available, please refer to Standard spec sheet for more details. How To Specify: BTS Bolt Series Model 150 150W 220 220W 280 280W 440 440W 560 560W Wattage BLK Black WHT White Finish UNV 120V-277V HVT 347-480V Voltage 15 15º 30 30º 60 60º 80 80º WD* 100º (with diffuser) Beam Angle 308 3000K / CRI85 408 4000K / CRI85 507 5000K / CRI75 CCT / CRI STV Standard 0-10V <10% Dimming Ordering Example: BTS-560-507-UNV-STV-15-BLK-BRK-WG BTS Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 2 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING Accessories Rating WG GSB GSV DF* SLP OUT1 NAT2 Wire Guard Glare Shield Baffle Glare Shield Visor Diffuser Slipfitter Outing Rating Natatorium Rating Mounting BRK Bracket 4-5 weeks lead time on over 75% of specifications. 1 Outdoor rating: Coating and wiring will be changed to high UV resistant and corrosion resistant materials for long term operation in outdoor environments. 2 Natatorium rating: Coating and sealant will be changed to high corrosion resistant materials to prevent damage from long term exposure to chlorine vapors. *Please factor in change in lumen output with diffuser. (-20% with 100°; -12% with other degrees) BTS-150-CC7-UNV (Bolt-150W-5000K-UNV) BTS-560-50K (Bolt-560W-5000K) (Bolt-220W-5000K-UNV)(Bolt-280W-5000K-UNV)BTS-220-CC7-UNV BTS-280-CC7-UNV DesignLights Consortium™ Qualified Luminaires: * Please factor in change in lumen output with diffuser. (-20% with 100°; -12% with other degrees) Delivered Lumens* Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 3 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING Current Consumption 120V 277V 150W 1.50A 0.64A 1.01A 1.29A 2.02A 2.58A 2.44A 3.08A 4.88A 6.16A 220W 280W 440W 560W 24354 lm15746 lm 31939 lm 48734 lm 28389 lm17002 lm 35880 lm 56731 lm 30182 lm18051 lm 38339 lm 60509 lm 76486 lm 71888 lm 63766 lm CCT 3000K 5000K 280W220W150W 440W 560W 4000K *Tolerance±8% Beam Angle: 15° Wattage Wattage Volt 150W / 220W / 280W 8.7” 18.26” 10.6” 3.9”Ø1.07”Ø7.87” 0.87” 0.4” 3.03” 7.87” Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 4 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING Dimensions Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 5 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING Dimensions 440W / 560W 90º 1.07” 0.41” 30º 30º2.8” 10.78” 9.13” 18.74” 11.41” 9.84” 3.14” 4.72” 17.91” 7.87” 0.55” Stainless Steel Specification METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately. 2018 V1.1 | Page 6 of 6 Bolt Series - Outdoor/Natatorium ADVANCED HIGH CEILING Accessory Glare Shield Baffle Glare Shield Visor Wire Guard Slipfitter 3 ¼” ¼” 4 ½” ½” 4” ∅1 ∅3 Tenon slipfitter; fits 2-3/8" to 2-7/8" OD tenon. 5.3” 5.3”5.3” 1’- 5¼” 1’- 4¼” MATRIX FLOODLIGHT CERTIFICATIONS/LISTINGS PRODUCT IMAGE(S)SPECIFICATIONS Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2018 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA August 8, 2018 7:43 AM Cat.# Approvals Job Type DIMENSIONS 29.7 31.20 25.0 25.00 26.25 4.0 13.2 34.5 Model Mount Weight lbs. Weight kgs.EPA, Sq. ft. Flood Knuckle, 0˚ Knuckle, 30˚ 86.0 39.1 1.7 3.8 Intended Use: The Beacon Matrix luminaire is available in three configurations with a wide choice of different LED wattage configurations and optical distributions designed to replace HID lighting up to 1000W MH or HPS. Luminaires are suitable for wet locations. Construction: • Manufactured with die cast aluminum. • Coated with a polyester finish that meets ASTM B117 corrosion test requirements and ASTM D522 cracking and loss of adhesion test requirements. • External hardware is corrosion resistant. • One piece optical cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel bezel. • Cartridge can be field replaced as a one piece optical system. • Silicone gasket ensures a weather-proof seal around each individual optic. • Glass enclosed optics enable high angle aiming. Electrical: • Luminaire accepts 100V through 277V, 50 Hz to 60 Hz (UNV), 347V, or 480V input. • Power factor is ≥ .90 at full load. • Dimming drivers are standard, but must contact factory to request wiring leads for purpose of external dimming controls. • Component-to-component wiring within the luminaire may carry no more than 80% of rated load and is certified by UL for use at 600VAC at 90°C or higher. • Fixture electrical compartment shall contain all LED driver components and optional push-button terminal block for AC power connections. • Ambient operating temperature -40°C to 40°C • Surge protection - 20kA. ANSI/IEEE category C high Controls/Options: • Available with an optional passive infrared (PIR) motion sensor capable of detecting motion 360° around the luminaire. When no motion is detected for the specified time, the motion response system reduces the wattage to factory preset level, reducing the light level accordingly. When motion is detected by the PIR sensor, the luminaire returns to full wattage and full light output. Please contact Beacon Products if project requirements vary from standard configuration. • Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night (see www.beaconproducts.com/products/energeni). • In addition, Matrix can be specified with SiteSync™ wireless control system for reduction in energy and maintenance costs while optimizing light quality 24/7. For more details, see ordering information or visit: www.hubbelllighting.com/sitesync Installation: • Adjustable knuckle and post top mount designed to slip fit a 2” tenon that is 2 3/8” OD by 4” in length. • Knuckle mount luminaire can adjust in 5˚ increments. Finish: • IFS polyester powder-coat electrostatically applied and thermocured. IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish. • The finish meets the AAMA 2604 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds. Certifications/Ratings: • DesignLights Consortium (DLC) qualified, consult DLC website for more details: http://www.designlights.org/QPL • Certified to UL 1598, UL 8750, and CSA C22.2 No. 250.0 • 1.5G rated for ANSI C136.31 • IP66 optical assembly • IDA approved Warranty: Five year limited warranty for more information visit: www.hubbelllighting.com/resources/warranty IP65 Knuckle Yoke 5.09 Sensors, photocells and wireless controls should not be tilted above horizontal. Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2018 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA AuGuST 8, 2018 7:43 AM ORDERING INFORMATION ORDERING EXAMPLE: MAF/196L-610/5K7/N/UNV/K/DB PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.hubbell-automation.com/products/sitesync/ or contact Hubbell Lighting tech support at (800) 345-4928. SiteSync fixtures with Motion control (SWPM) require the mounting height of the fixture for selection of the lens. Examples: MAF/196L-610/5K7/N/UNV/K/DB/SWP SiteSync only MAF/196L-610/5K7/N/UNV/K/DB/SWPM/40F SiteSync with Motion Control MA/F SERIES MA/F Matrix ENGINE 104L-265 265W, 30,000 lm 104L-300 300W, 33,000 lm 104L-330 330W, 35,000 lm 148L-380 380W, 42,000 lm 148L-425 425W, 46,000 lm 148L-470 470W, 50,000 lm 192L-490 490W, 55,000 lm 192L-550 550W, 60,000 lm 192L-610 610W, 65,000 lm VOLTAGE UNV 120- 277V 347 347V 480 480V CCT/CRI6 5K7 5000K, 70 CRI 4K7 4000K, 70 CRI 3K7 3000K, 70 CRI DISTRIBUTION N 2x2 Flood M 4x4 Flood W 6x6 Flood TC6 Tennis Court 4W6 Type 4 Wide 5QN6 Type 5 Square Narrow COLOR DB Dark Bronze Textured BL Black Textured WH White Textured PS Plat. Silver Smooth GYS Light Gray Smooth GT Graphite Textured TT Titanium Textured CC Custom Color MOUNTING K Knuckle (5o adjustable fitter) Y Yoke ASQ Arm Square A2 Arm mount for 2.4”-3.0” OD round Pole A3 Arm mount for 3.1”-4.0” OD round Pole A4 Arm mount for 4.1”-5.0” OD round Pole A5 Arm mount for 5.1”-6.0” OD round Pole Accessories and Services (Ordered Separately) 1 Not available with other sensor or wireless control options. 2 Specify routine setting code (example GENI-04). See ENERGENI brochure and instructions for setting table options. 3 Photocell included with sensor, additional photocontrol not recommended. 4 Order at least one SCPREMOTE per project location to program and control the occupancy sensor. 5 Specify group and zone at time of order. See www.hubbell-automation.com/products/sitesync/ for more details. Order at least one SiteSync interface Accessory SWUSB or SWTAB. Each option contains SiteSync License, GUI, and Bridge Node. 6 Does not include glass lens. Limit to 30o tilt 7 Shorting cap, phot control, or wireless control provided by others CONTROL OPTIONS 7PR7 7-PIN Receptacle only 7PR-TL 7-PIN Receptacle w/ Twist Lock photo control 7PR-SC 7-PIN Receptacle w/ Shorting Cap 2PF 2 power feed with 2 drivers GENI1,2 Energeni PC1 Button Photocell SCP/40F1,3,4 Programmable Line Voltage sensor SWP1,5 SiteSync Pre-Commission SWPM/40F1,5 SiteSync Pre-Commission w/Sensor OPTIONS FL Louver SF120 120V Fuse SF277 277V Fuse SF347 347V Fuse DF208 208V Fuse DF240 240V Fuse DF480 480V Fuse Control Accessories SWUSB*SiteSync interface software loaded on USB flash drive for use with owner supplied PC (Windows based only). Includes SiteSync license, software and USB radio bridge node. SWTAB*Windows tablet and SiteSync interface software. Includes tablet with preloaded software, SiteSync license and USB radio bridge node SWBRG+SiteSync USB radio bridge node only. Order if a replace- ment is required or if an extra bridge node is requested. SCPREMOTE Order at least one per project location to program and control SW7PR+SiteSync 7 Pin on fixture module On/Off/Dim, Daylight Sensor 120-480VACAccessories MAF-FL Louver (Set of two) MAF-FV-XX Visor (Set of two) MAF-FVY-XX Yoke Visor (Set of two) * When ordering SiteSync at least one of these two interface options must be ordered per project. + Available as a SiteSync retrofit solution for fixtures with an existing 7pin receptacle. Accessories and Services (Ordered Separately) Catalog Number Description HCS System NXOFM-1R1D-UNV On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Ra- dio and Bluetooth® Radio, 120-480VAC NX Distributed Intelligence™ WIR-RME-L On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiSCAPE Radio, 110-480VAC wiSCAPE® Lighting Control For additional information related to these accessories please visit www.hubbellcontrolsolutions.com. Options provided for use with integrated sensor, please view specification sheet ordering information table for details. Hubbell Control Solutions - Accessories (sold separately) SiteSync 7-Pin Module • SiteSync features in a new form • Available as an accessory for new construction or retrofit applications (with existing 7-Pin receptacle) • Does no interface with occupancy sensors SW7PR MAF-FL MAF-FV-XX MAF-FVY-XX Replace XX with finish 25.05 25.05 7.50 3.00 7.50 3.00 25.00 6.38 .43 25.05 25.05 7.50 3.00 7.50 3.00 25.00 6.38 .43 25.05 25.05 7.50 3.00 7.50 3.00 25.00 6.38 .43 Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2018 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA AuGuST 8, 2018 7:43 AM PERFORMANCE DATA – FLOOD PERFORMANCE DATA – TENNIS COURT 1Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. 1Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application. 5K7 (5000K nominal, 70 CRI) 4K7 (4000K nominal, 70 CRI)3K7(3000K nominal, 70 CRI) System Watts 120-277V DISTRIBUTION TYPE LUMENS LPW1 MAX BEAM CANDLEPOWER LUMENS LPW1 MAX BEAM CANDLEPOWER LUMENS LPW1 MAX BEAM CANDLEPOWER 265 N 30726 116 317935 29660 112 306902 28318 107 293020 M 28834 108 88608 27834 104 85534 26575 99 81664 W 29370 109 22723 28351 106 21935 27069 101 20942 300 N 33617 113 347849 32450 109 335778 30983 104 320590 M 31547 105 96946 30453 101 30453 29075 97 89348 W 32134 106 24861 31019 103 23999 29616 98 22913 330 N 36308 109 375698 35048 105 362661 33463 100 346256 M 34073 101 104707 32891 97 101073 31403 93 96501 W 34706 102 26852 33502 99 25920 31986 94 24747 380 N 43726 116 452447 42208 112 436746 39919 106 413059 M 41034 108 126097 39610 104 121721 37461 98 115120 W 41796 109 32337 40346 106 31215 38158 100 29522 425 N 47840 113 495017 46179 109 477838 43675 103 451923 M 44894 105 137961 43336 101 133174 40986 95 125951 W 45729 106 35380 44142 102 34152 41748 97 32300 470 N 51670 109 534648 49877 105 516094 47172 99 488104 M 48488 101 149006 46806 97 143835 44267 92 136035 W 49390 102 38212 47676 99 36886 45090 93 34886 490 N 56725 116 586958 54757 112 566589 51787 106 535861 M 53233 108 163585 51385 104 157908 48599 98 149344 W 54222 109 41951 52340 106 40495 49502 100 38299 550 N 62062 113 642184 59909 109 619899 56659 103 586279 M 58241 105 178977 56220 101 172766 53171 95 163396 W 59324 106 45898 57265 102 44305 54159 97 41903 610 N 67031 109 693597 64705 105 669528 61196 99 633216 M 62904 101 193306 60721 97 186598 57428 92 176478 W 64073 102 49573 61850 99 47853 58495 93 45257 5K (5000K nominal, 70 CRI) 4K (4000K nominal, 70 CRI) 3K (3000K nominal, 70 CRI) # LED’S DRIVE CURRENT (MILLIAMPS) SYSTEM WATTS DISTRIBUTION TYPE LUMENS LPW1 B U G LUMENS LPW1 B U G LUMENS LPW1 B U G 104 800 265 TC 32936 122 3 0 3 31793 118 2 0 3 30069 112 2 0 3 104 900 300 36034 119 3 0 3 34783 115 3 0 3 32897 109 3 0 3 104 1000 330 38919 114 3 0 3 37568 110 3 0 3 35531 104 3 0 3 148 800 380 46869 122 3 0 4 45243 118 3 0 4 42789 112 3 0 4 148 900 425 51279 119 3 0 4 49499 115 3 0 4 46815 108 3 0 4 148 1000 470 55385 114 3 0 4 53463 110 3 0 4 50564 104 3 0 4 192 800 490 60804 122 3 0 4 58694 118 3 0 4 55511 112 3 0 4 192 900 550 66525 119 3 0 5 64217 114 3 0 4 60734 108 3 0 4 192 1000 610 71851 115 3 0 5 69358 111 3 0 5 65596 105 3 0 4 Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice. © 2018 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA AuGuST 8, 2018 7:43 AM PROJECTED LUMEN MAINTENANCE AMBIENT TEMP.0 25,000 50,000 1TM-21-11 60,000 100,000 Calculated L70 (HOURS) 25°C / 77°F 1 0.95 0.90 0.89 0.80 >150,000 40°C / 104°F 0.99 0.93 0.88 0.86 0.78 >145,000 1 Projected per IESNA TM-21-11 Data references the extrapolated performance projections for the base model in a 25°C ambient, based on 10,000 hours of LED testing per IESNA LM-80-08. ELECTRICAL DATA AMBIENT TEMPERATURE LUMEN MULTIPLIER 0°C 32°F 1.05 10°C 50°F 1.02 20°C 68°F 1.01 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.98 50°C 122°F 0.96 Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). # OF LEDS NUMBER OF DRIVERS DRIVE CURRENT (mA) INPUT VOLTAGE (V) SYSTEM POWER (W) CURRENT (Amps) 192 2 1000 120 628 5.2 208 3.0 240 2.6 277 2.3 347 1.8 480 1.3 2 900 120 561 4.7 208 2.7 240 2.3 277 2.0 347 1.6 480 1.2 2 800 120 493 4.1 208 2.4 240 2.1 277 1.8 347 1.4 480 1.0 148 2 1000 120 484 4.0 208 2.3 240 2.0 277 1.7 347 1.4 480 1.0 2 900 120 432 3.6 208 2.1 240 1.8 277 1.6 347 1.2 480 0.9 2 800 120 380 3.2 208 1.8 240 1.6 277 1.4 347 1.1 480 0.8 104 1 1000 120 336 2.8 208 1.6 240 1.4 277 1.2 347 1.0 480 0.7 1 900 120 300 2.5 208 1.4 240 1.3 277 1.1 347 0.9 480 0.6 1 800 120 264 2.2 208 1.3 240 1.1 277 1.0 347 0.8 480 0.6